9.6

Handling and storage precautions

9.6.1

Shock precaution

Sensor modules house numerous internal components that are susceptible to shock damage. If a unit is subject

to excessive shock, is dropped on the floor, or a tray/reel of units is dropped on the floor, it must be rejected, even

if no apparent damage is visible.

9.6.2

Part handling

Handling must be done with non-marring ESD safe carbon, plastic, or teflon tweezers. Ranging modules are

susceptible to damage or contamination. The customer is advised to use a clean assembly process after

removing the tape from the parts, and until a protective cover glass is mounted.

9.6.3

Compression force

A maximum compressive load of 25 N should be applied on the module.

9.6.4

Moisture sensitivity level

Moisture sensitivity is level 3 (MSL) as described in IPC/JEDEC JSTD-020-C.

9.7

Storage temperature conditions

Table 18. Recommended storage conditions

Parameter

Min.

Typ.

Max.

Unit

Temperature (storage)

-40

23

85

°C

VL53L4CD

Handling and storage precautions

DS13812 - Rev 5

page 30/37