4

H:\0 - Quality Documents\2 Department\Tech Serv\Application tooling\Presses\AP-K2N\TS010-00 AP-K2N Operation

Manual.doc

1. SPECIFICATIONS

The crimping machine is composed of the

crimping press and an applicator.

There are two basic types of applicators

(a total of four models).

1.1 Crimping Machine Specifications

1.2 Applicator specifications

Model no. MK-L (for-end feeding terminals)

º Weight 6.8 Kg

º Feed pitch 30mm max.

º Crimp height adjustment: Dial type

Model no. MKF-L (for-end feeding flag terminals)

º Weight 6.8 Kg

º Feed pitch 30mm max.

º Crimp height adjustment: Dial type

Models MK-L and MKF-L for end feeding

terminals, and models MKS-L and MKS-LS for

side feeding terminals. The crimping machine

utilizes a quick change system thus allowing quick

change-over times.

Model no: AP-K2N

º External dimensions: 280mm Wide x

480mm Long x 560mm High

º Weight: 90 Kg

º Power supply: 220/240V AC single phase

50/60 Hz

º Power consumption: 680VA

º Crimping force: 1500 Kg

º Ram stroke: 30mm

º Ram speed: 260 strokes per minute

(60 Hz), and 220 strokes per minute

(50 Hz)

º Closed height: 160.0 mm ± 0.01 at B.D.C

Model no. MKS-L (for side-feeding terminals)

º Weight 6.4 Kg

º Feed pitch 30mm max.

º Crimp height adjustment: Dial type

Model no. MKS-LS (for side feeding terminals)

º Weight 4.5 Kg

º Feed pitch 30mm max.

º Crimp height adjustment: Dial type