1161 Ringwood Ct, #110, San Jose, CA 95131, U. S. A. Tel.: (408) 748-9100, Fax: (408) 748-9111

www.analogtechnologies.com

Copyrights 2000-2018, Analog Technologies, Inc. All Rights Reserved. Updated on 3/22/2018

www.analogti.com

4

Analog Technologies

ATAS80

Auto Iron

3. Assembly of the heating core with the soldering handle

A. Position the salient point of the heating core with the sign ‘▲’ on the handle, then insert into the bottom. See Figure

9.

Figure 9

B. Place the nut on the heating core above the screw thread of the handle, and lightly tighten clockwise. See Figure 10.

Figure 10

4. Connection between the iron holder, the main body and the grounding wire. See Figure 11.

Figure 11

INSTRUCTION FOR THE FUNCTION SETTING

A. Password setting:

1. press ‘*’ button to enter into ‘password setting’ mode

2. press ‘#’ to confirm

3. press ‘▲’ ‘▼’ to set the password

4. Press ‘#’ to confirm and enter the unit into locked status.

B. Release locked status:

1. press ‘*’ to enter into ‘password setting’

2. press ‘*’ ‘▼’, meantime press ‘#’ for one second

3. release the button ‘#’ and the password will be released

C. Temperature setting:

1. press ‘*’ button twice to enter into ‘temperature setting’

2. press ‘#’ to confirm

3. press ‘▲’ ‘▼’ to set the temperature

4. press the ‘#’ to confirm

Aim