pre-heating

60 to 90 sec.

@ 140ºC to 160ºC

reflow

40 to 60 sec.

@ >183ºC

NOTE: The CS-300 should not be subjected to a wash process that will immerse it in solvents. NO CLEAN is the recommended

procedure. The CS-300 has been designed for pick and place reflow soldering. The suggested reflow profile is shown above.

The CS-300 may be reflowed once, and should not be reflowed in the inverted position.

8.89

(0.35)

17.78

(0.70)

19.05

(0.75)

2.54

(0.10)

1.91

(0.075)

3.04

(0.12)

9.53

(0.375)

mm

(in)

Temperature ( ºC)