Data Sheet

ADP1974

Rev. 0 | Page 17 of 19

As an example, a design with a 20 V input and a 10 nF capacitor

creates a delay of 1 ms and a 2.5 V/ms ramp rate.

capacitor is not used, the internal 5 μA (typical) current source

capacitor is not used, there is no soft start control internal to the

ADP1974, and the system can produce a large output overshoot,

capacitor is not used, ensure that the output overshoot is not

large enough to trip the hiccup current limit during startup.