2

ICS162834

Advance Information

0774—02/10/03

General Description

The ICS162834 low voltage 18-bit register combines D-type latches and D-type flip-flops to allow data flow in

transparent, latched and clocked modes. Date flow is controlled by output-enable (OE#), latch enable (LE#),

and clock (CLK) inputs. The device operates in transparent mode when LE# is held low. The device operates

in clocked mode when LE# is high and CLK is toggled. Data transfers from the inputs (A[18:1]) to outputs

(Y[18:1]) on a positive edge transition of the clock. When OE# is low, the output state is enabled. When OE#

is high, the output port is in a high impedance state.

The 18-bit registered buffer is designed to operate with a 3.0V to 4.6V supply voltage.

All inputs support operation with standard LVTTL interface levels. This includes data inputs, clock inputs and

control inputs. Device outputs meet the requirements of the PC133 Registered DIMM specification. The device

functions as defined supports latched, registered and flow through modes of operations. The PC133

Specification requires only registered mode.

Package is a 56 thin shrink small-outline package as defined by JEDEC Publication, JEP95, MO-153.