MPC885CZP66 datasheet(36/87 Pages) NXP

36 / 87 page

MPC885/MPC880 PowerQUICC Hardware Specifications, Rev. 7

Freescale Semiconductor

Bus Signal Timing

Table 10 provides the interrupt timing for the MPC885/MPC880.

Figure 26 provides the interrupt detection timing for the external level-sensitive lines.

Figure 26. Interrupt Detection Timing for External Level Sensitive Lines

Figure 27 provides the interrupt detection timing for the external edge-sensitive lines.

Figure 27. Interrupt Detection Timing for External Edge Sensitive Lines

Table 10. Interrupt Timing

Num

Characteristic1

1 The I39 and I40 timings describe the testing conditions under which the IRQ lines are tested when being defined as level

sensitive. The IRQ lines are synchronized internally and do not have to be asserted or negated with reference to the CLKOUT.

The I41, I42, and I43 timings are specified to allow correct functioning of the IRQ lines detection circuitry and have no direct

relation with the total system interrupt latency that the MPC885/MPC880 is able to support.

All Frequencies

Unit

Min

Max

I39

IRQx valid to CLKOUT rising edge (setup time)

6.00

I40

IRQx hold time after CLKOUT

2.00

I41

IRQx pulse width low

3.00

I42

IRQx pulse width high

3.00

I43

IRQx edge-to-edge time

× TCLOCKOUT

—

CLKOUT

IRQx

I39

I40

CLKOUT

IRQx

I41

I42

I43

MPC885CZP66 Datasheet(PDF) 36 Page - NXP Semiconductors

MPC885CZP66 Datasheet(HTML) 36 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87

Datasheet Descarga

Enlace URL