MODEL: R30PA2

R30PA2 SPECIFICATIONS

ES-9022 Rev.2 Page 2/5

https://www.m-system.co.jp/

INPUT SPECIFICATIONS

Module type: Pulse input, 2 points

Common: Positive or negative common (NPN/PNP), common

per 2 points

■ Contact Input / Reset Input

•Open collector input (NPN, PNP)

Rated input voltage: 24 V DC ±10 %; ripple 5 %p-p max.

ON voltage/current: ≥ 16 V DC (input to common) /

≥ 3.7 mA

OFF voltage/current: ≤ 5 V DC (input to common) / ≤ 1 mA

•Voltage Pulse Input

ON voltage/current: ≥ 16 V DC (input to common) /

≥ 3.7 mA

OFF voltage/current: ≤ 5 V DC (input to common) / ≤ 1 mA

Input current: ≤ 5.5 mA per point at 24 V DC

Input resistance: Approx. 4.4 kΩ

ON delay: ≤ 2.0 msec.

OFF delay: ≤ 2.0 msec.

Max input frequency: 100 Hz

Minimum pulse width time requirement: 5 msec. (for both

ON and OFF)

Totalized pulse range: 0 to 4,294,967,295 (0 only when the

counter is reset)

Max pulse range: 1 to 4,294,967,295

(factory setting: 4,294,967,295)

Count at overflow: 0 or 1 (factory setting: 0)

INSTALLATION

Current consumption: 30 mA max.

Operating temperature: -10 to +55°C (14 to 131°F)

Storage temperature: -20 to +65°C (-4 to +149°F)

Operating humidity: 10 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Installation Base (model: R30BS)

Weight: 150 g (0.33 lb)

PERFORMANCE

Data allocation: 4

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @ 1 minute

(input or reset input or external power to internal bus or

internal power)

1500 V AC @ 1 minute (power to FG; isolated on the power

supply module)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive