MBASLASHSMA0204VG06 datasheet(7/9 Pages) VISHAY

7 / 9 page

MBA/SMA 0204 VG06, MBB/SMA 0207 VG06, MBE/SMA 0414

www.vishay.com

Vishay Beyschlag

Revision: 27-Feb-2019

Document Number: 28768

For technical questions, contact: specialresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Further information on the performance of these products is given in the following datasheets:

• “Professional Leaded Metal Film Resistors” (www.vishay.com/doc?28766) for products ± 50 ppm/K; ± 1 % and 0

 jumper

• “Precision Leaded Metal Film Resistors” (www.vishay.com/doc?28767) for products ± 15 ppm/K; ± 0.1 %

TESTS AND REQUIREMENTS

All tests are carried out in accordance with the following specifications:

EN 60115-1, generic specification

EN 140100 (successor of EN 140400), sectional specification

EN 140101-806, detail specification

For further information on the tests and requirements of these products please refer to the specifications mentioned above, and

to the following datasheets:

• “Professional Leaded Metal Film Resistors” (www.vishay.com/doc?28766) for products ± 50 ppm/K; ± 1 % and 0

 jumper

• “Precision Leaded Metal Film Resistors” (www.vishay.com/doc?28767) for products ± 15 ppm/K; ± 0.1 %

DIMENSIONS

Notes

• Color code marking is applied according to IEC 60062 (1) in five bands. Each color band appears as a single solid line, voids are permissible

if at least 2/3 of the band is visible from each radial angle of view. The last color band for tolerance is approximately 50 % wider than the

other bands. Zero ohm jumpers are marked with one centered black color band. An interrupted violet band between the 1st and 2nd full band

indicates the failure rate level E7. An interrupted orange band between the 4th and 5th full band indicates the temperature coefficient of

15 ppm/K

(1) The quoted IEC standards are also released as EN standards with the same number and identical contents

DIMENSIONS AND MASS

TYPE

Dmax.

(mm)

Lmax.

(mm)

Imin.

(mm)

dnom.

(mm)

Mmin.

(mm)

MASS

(mg)

MBA/SMA 0204 VG06

1.6

3.6

0.5

5.0

125

MBB/SMA 0207 VG06

2.5

6.3

0.6

220

MBE/SMA 0414 VG06

4.0

11.9

0.8

700

100

10K

100K

120

Resistance Value

100

10M

MBE/SMA 0414 VG06

MBB/SMA 0207 VG06

MBA/SMA 0204 VG06

In accordance with IEC 60440

Non-Linearity - Third Harmonic Ratio A3

MBA/SMA0204VG06 Datasheet(PDF) 7 Page - Vishay Siliconix

MBA/SMA0204VG06 Datasheet(HTML) 7 Page - Vishay Siliconix

Html Pages

1 2 3 4 5 6 7 8 9

Datasheet Descarga

Enlace URL