MODEL: 47LLC

47LLC SPECIFICATIONS

ES-9505 Rev.8 Page 3/7

http://www.m-system.co.jp/

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Panel flush mounting

Weight: 300 g (0.66 lb)

PERFORMANCE in percentage of max. span

Accuracy

Display: ±0.1 % ±1 digit

Output: ±0.25 % (DC output = display + output)

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Input resolution: Max. 20 bits

Output resolution: Max. 16 bits

Response time: ≤ 0.5 sec.

(alarm output: 0 – 100 % at 90 % setpoint)

≤ 0.5 sec. (DC output: 0 – 90 %)

Excitation: Set value ±250 mV

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @ 1 minute (strain gauge

input or excitation or contact input or SG to DC output to HH

output or H output to L output or LL output to power to

ground)

EXTERNAL VIEW

(4) Max/Min Button

(5) Alarm/

Button

(6) Scale/

Button

(7) Shift Button

(8) Up Button

(1) Main Display

(2) Alarm Indicators

(3) Function Indicators

Alarm/

Scale/

Max/Min

Shift

Up

Zro

HH

H

P

L

LL

Spn

D/P

Tch

Fnc

Min

Max

• COMPONENT IDENTIFICATION

No.

COMPONENT

FUNCTION

(1)

Main display

Indicates present values, setting values and status of the unit.

(2)

Alarm indicators

Indicate alarm status of the input signal.

(3)

Function indicators

Indicate the status in each setting mode.

(4)

Max/Min button

Used to switch the main display to show the present values, maximum values or minimum values etc.

(5)

Alarm/

button

Used to con rm alarm setting value and to move on to the alarm and other setting modes; or to shift through

setting items in each setting mode.

(6)

Scale/

button

Used to move on to the scaling and other setting modes; or to shift through setting items in each setting

mode.

(7)

Shift button

Used to move on to the setting standby status of each setting mode and shift through display digits in each

setting item.

(8)

Up button

Used to select setting values in each setting mode.

Note: Refer to the operating manual for details on each function.