STM32G47PBY3TR datasheet(17/229 Pages) STMICROELECTRONICS

17 / 229 page

DS12712 Rev 3

17/229

STM32G473xB STM32G473xC STM32G473xE

Functional overview

3.1

Arm® Cortex®-M4 core with FPU

The Arm® Cortex®-M4 with FPU processor is the latest generation of Arm processors for

embedded systems. It was developed to provide a low-cost platform that meets the needs of

the MCU implementation, with a reduced pin count and with low-power consumption, while

delivering outstanding computational performance and an advanced response to interrupts.

The Arm® Cortex®-M4 with FPU 32-bit RISC processor features an exceptional code-

efficiency, delivering the expected high-performance from an Arm core in a memory size

usually associated with 8-bit and 16-bit devices.

The processor supports a set of DSP instructions which allows an efficient signal processing

and a complex algorithm execution. Its single precision FPU speeds up the software

development by using metalanguage development tools to avoid saturation.

With its embedded Arm core, the STM32G473xB/xC/xE family is compatible with all Arm

tools and software.

Figure 1 shows the general block diagram of the STM32G473xB/xC/xE devices.

3.2

Adaptive real-time memory accelerator (ART accelerator)

The ART accelerator is a memory accelerator that is optimized for the STM32 industry-

standard Arm® Cortex®-M4 processors. It balances the inherent performance advantage of

the Arm® Cortex®-M4 over Flash memory technologies, which normally requires the

processor to wait for the Flash memory at higher frequencies.

3.3

Memory protection unit

The memory protection unit (MPU) is used to manage the CPU accesses to the memory

and to prevent one task to accidentally corrupt the memory or the resources used by any

other active task. This memory area is organized into up to 8 protected areas, which can be

divided in up into 8 subareas each. The protection area sizes range between 32 bytes and

the whole 4 gigabytes of addressable memory.

The MPU is especially helpful for applications where some critical or certified code has to be

protected against the misbehavior of other tasks. It is usually managed by an RTOS (real-

time operating system). If a program accesses a memory location that is prohibited by the

MPU, the RTOS can detect it and take action. In an RTOS environment, the kernel can

dynamically update the MPU area setting based on the process to be executed.

The MPU is optional and can be bypassed for applications that do not need it.

STM32G47PBY3TR Datasheet(PDF) 17 Page - STMicroelectronics