MMM6025 datasheet(7/16 Pages) FREESCALE

7 / 16 page

RF Specifications

MMM6025 Advance Information, Rev. 5.1

Freescale Semiconductor

Stability - Spurious Output9

Stab

-36

dBm

Closed Loop Power Variation over Temperature10

Pout_Temp Ambient 1

(Pout = 3 dBm)

Pout_Temp Ambient 2

(Pout = 15 dBm)

Pout_Temp Ambient 3

(Pout = 30 dBm)

-1.5

1.0

-0.5

1.5

1.0

0.5

1 Power output must be monotonic with power detector voltage. (Vdd = 2.8V to 4.5V and Temperature = -20 to +70°C)

2 Vdd = 2.8V to 4.5V and Temperature = -20 to +70°C

3 Measurement made from 50% of V

APC to 10%/90% of VDET_OUT final value, with pulsed VAPC with a peak voltage in the range

of 0.1 to 2.2 V and both rise and fall edges.

4 Measured at antenna port: ISO1: P

in = -10 dBm, EN_ANT_TX = 0 V, VAPC = 0.1 V;

ISO2: Pin = 11 dBm, EN_ANT_TX = 2.723 V, VAPC = 0.1 V. (Vdd = 2.8V to 4.5V and Temperature = -20 to +70°C)

5 DCS RX band = 1805 to 1880 MHz. Vdd = 4.2V, Saturated P

out.

6 Vdd = 2.8V to 4.5V and Temperature = -20 to +70°C

7 Maintaining constant Vdet-Vref at all mismatch phase angles. Measured at antenna port: P

out = 30 dBm

8 VSWR = 20:1 all phase angles, Vdd = 2.8V to 4.5V, Pin = 5dBm to 11dBm, Temperature = -20 to +70°C, Power less than or

equal to 30 dBm

9 Output VSWR = 10:1 all phase angles, Vdd = 2.8V to 4.5V, Pin = 5dBm to 11dBm, Temperature = -20 to +70°C, Power less

than or equal to 30dBm.

10 Vdiff_var = 20*LOG(Delta(T)/Delta(25°C)), where T is -20 to 65°C, Delta(T)= [Vdiff(T) with RF] - [Vdiff(T) without RF], and

Delta(25°C)= [Vdiff(25°C) with RF] - [Vdiff(25°C) without RF]

Table 7. GSM850 Band Specifications

Characteristic

Symbol

Min

Typ

Max

Unit

GSM850 BAND (Pin = 5.0 to 11 dBm, Vdd = 3.2 Vdc, VAPC = 0.1 to 2.2 V pulsed, 25% duty cycle, LOWB_HIGH = Low, EUB_US

= High, TC = 25°C ±5°C, unless otherwise noted.)

Operating Frequency

Transmit

Receive

824

869

849

894

MHz

Power Out

Po(max)

dBm

Power Out Low Voltage (VCC_PA = 2.8 V)

Po(min)

dBm

Power Added Efficiency (Saturated Pout)

PAE

Power Control Range1

Po(range)

Power Control Slope2

∆V

det/∆VAPC

3.0

V/V

Power Control Frequency 3.0 dB BW

PC3dB

1.0

MHz

Power Control Response Time3

tPC

1.5

µs

Forward Isolation4

ISO1

ISO2

-41

-22

dBm

Table 6. DCS Band Specifications (continued)

Characteristic

Symbol

Min

Typ

Max

Unit

MMM6025 Datasheet(PDF) 7 Page - Freescale Semiconductor, Inc

MMM6025 Datasheet(HTML) 7 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Datasheet Descarga

Enlace URL