Ver.2.13

GP-IB(LPCI)F, GP-IB(LPCI)FL

1

High-speed IEEE-488.2 GPIB communication

board for Low Profile PCI

GP-IB(LPCI)F, GP-IB(LPCI)FL

* Specifications,color and designof the products are subject to change

without notice.

Model

Name

Busanalyzer

function

GP-IB(LPCI)F

High-performancehigh-speedIEEE-488.2GPIBcommunicationboard

Ο

GP-IB(LPCI)FL

Low-pricehigh-speedIEEE-488.2GPIBcommunicationboard

None

This product is a PCI bus compatible interfaceboard with support for bus

master operation and which complies with IEEE-488.1 and IEEE-488.2.

The card can be used in a PC to control communications with devices

that support the GPIB interface and perform GPIB bus line data analysis.

You can use thesupplied driver library to develop application software

using any programming language that supports the Win32 API routines

(such as Visual Basic or Visual C++), or using LabVIEW.

* The contents in this document are subject to change without notice.

* Visit the CONTEC website to check the latest details in the document.

* The information in the data sheets is as of August 2019.

Features

Complieswith the IEEE-488.2 standard

As thecard complies with the IEEE-488.2 standard, youcan control any

external device that supports this standard.

Data transfer speed 1.5Mbyte/sec max.

The maximum data transfer speed for communications is 1.5Mbyte/sec.

Supports bus master operation

The bus master data transfer function enables large quantities of data to

be transferred between the board and PC without loading the CPU.

Internal 2Kbyte FIFO buffers for send and receive

The board has separate 2Kbyte FIFO buffers for sending and receiving

data, allowing both small and large volumes of data to be transferred at

high speed. Interfacemessages also use a FIFO to enable high-speed

transmission.

Built-in GPIB bus analyzer function [only GP-IB(LPCI)F]

The board features a bus analyzer function. This not only allows the

signals on the GPIB bus to analyzed, but also permits signal analysis to be

performed while the board is performing GPIB communications

Built-in SPAS event function

In addition to the functions of the earlier GPIB controller (µPD7210),the

board also supports the SPAS event generated when a serial poll occurs.

This gives you a high level of flexibility in constructing your system.

Internal high-precision timer

The board includes a high-precision application timer to allow accurate

time monitoring to be performed under Windows.

Long term availability

As the board uses a high-speed GPIB controller developed by CONTEC

(upwardly compatible with the µPD7210), reliable long term availability is

ensured.

Diagnostic program

A diagnostic program is supplied to support system development. The

diagnostic program can be used to check hardware operation (interrupts

and I/O addresses) and to perform simplecommunication tests with

connected devices.

Other

Support for both of Low Profilesize and standard size slots

(interchangeable with a bundled bracket).

Specifications

Item

GP-IB(LPCI)F

GP-IB(LPCI)FL

GPIB

Numberofchannel

1ch,ConformstoIEEE-488.1,488.2(GPIB)standards

Transferformat

8-bitparallel,3-wirehandshakesystem

Transferrate

1.5Mbyte/sec

Databuffersize

2Kbytesend,2Kbytereceive

Signallogic

Negativelogic

Llevel:0.8Vorless,Hlevel:2.0Vormore

Cablelengthbetweendevice

4morless

Totalcablelength

20morless

Connectablenumberofdevice

15devices(Max.)

Analyzerbuffersize

64Kdatapoints

(1datapoint: Controlsignals+

DIO1to8)

None

Busmastersection

DMAchannels

2ch

Transferbuswidth

32-bit

Transferdatalength

8PCIWordslength(Max.)

Transferrate

80Mbyte/sec

Scatter/Gatherfunction

64Mbyte/ch

Commonsection

I/Oaddress

Any128-byteboundary

Interrupt

1leveluse

Consumedcurrent

5VDC 400mA(Max.)

Operatingconditions

0-50°C,10-90%RH(Nocondensation)

PCIbusspecification

32-bit,33MHz,Universalkeyshapessupported*1

Physicaldimensions(mm)

121.69(L)x63.41(H)

Weight

110g

Standard

VCCIClassA,CEMarking(EMCDirectiveClassA,RoHSDirective)

Board Dimensions

Thestandardoutsidedimension(L)isthedistancefromtheendoftheboardtotheoutersurfaceoftheslotcover.

[mm]

121.69(L)

<GP-IB(LPCI)F>

[mm]

121.69(L)

<GP-IB(LPCI)FL>