September 2005

ASM5P2304B

rev 0.5

3.3V Zero Delay Buffer

2 of 13

Notice: The information in this document is subject to change without notice.

ASM5P2304B Configurations

Device

Feedback From

Bank A Frequency

Bank B Frequency

ASM5P2304B-1

Bank A or Bank B

Reference

Reference

ASM5P2304B-1H

Bank A or Bank B

Reference

Reference

ASM5P2304B-2

Bank A

Reference

Reference /2

ASM5P2304B-2

Bank B

2 X Reference

Reference

ASM5P2304B-2H

Bank A

Reference

Reference /2

ASM5P2304B-2H

Bank B

2 X Reference

Reference

Zero Delay and Skew Control

For applications requiring zero input-output delay, all outputs must be equally loaded.

To close the feedback loop of the ASM5P2304B, the FBK

pin can be driven from any of the four available output pins.

The output driving the FBK pin will be driving a total load of

7pF plus any additional load that it drives. The relative

loading of this output (with respect to the remaining

outputs) can adjust the input output delay. This is shown in

the above graph. For applications requiring zero input-

output delay, all outputs including the one providing

feedback should be equally loaded. If input-output delay

adjustments are required, use the above graph to calculate

loading differences between the feedback output and

remaining outputs. For zero output-output skew, be sure to

load outputs equally.

-30

-25

-20

-15

-10

-5

0

5

10

15

20

25

30

0

-500

-1000

-1500

500

1000

1500

Output Load Difference: FBK Load - CLKA/CLKB Load (pF)

REF Input to CLKA/CLKB Delay Vs Difference in Loading between FBK pin and CLKA/CLKB pins