2

Technical Data

10578

Effective December 2016

CL0608

Multi-phase power inductors

www.eaton.com/electronics

Product specifications

Inductor

Phases

(nH) ±20%

(nH) minimum

I

2

(A)

DCR (mΩ)

±10%

@ 20 °C

(nH) ±20%

I

4

(A)

CL0608- 2- 100TR-R

2

380

300

15

0.89

100

38

1. Open Circuit Inductance (OCL) Test Parameters: 1.0 MHz, 0.1 V

2. Full Load Inductance (FLL) Test Parameters: 1.0 MHz, 0.1 V

3. Short Circuit Inductance (SCL) Test Parameters: 1.0 MHz, 0.1 V

CL0608-2-100TR-R short (1 & 4), measure (2 & 3), and divide by 2.

4. I

8. Part Number Definition: CL0608-x-100TR-R

CL0608 = Product code and size

x = Number of phases

100 = Inductance value per phase in nH

TR = Tape and reel packaging

-R suffix = RoHS compliant

Note: This device is licensed for use only when incorporated within a voltage regulator

employing power regulating devices manufactured by Maxim Integrated Devices, Inc.

No license is granted expressly or by implication to use this device with power

regulating devices manufactured by any company other than Maxim.

Dimensions (mm)

Part marking: CL0608-x-100TR-R (x = number of phases), xxxx = lot code

Tolerances are ±0.25 millimeters unless stated otherwise

All soldering surfaces to be coplanar within 0.13 millimeters

PCB tolerances are ±0.1 millimeters unless stated otherwise

DCR measured from point “a” to point “b”

Do not route traces or vias underneath the inductor

Packaging information (mm)

Supplied in tape and reel packaging , 500 parts per 13” diameter reel

Drawing not to scale