MCP23008-ESLASHSS datasheet(10/40 Pages) MICROCHIP

No. de pieza	MCP23008-E/SS

Descripción Electrónicos	8-Bit I/O Expander with Serial Interface

PDF	40 Pages

Scroll/Zoom	100%

Fabricante Electrónico	MICROCHIP [Microchip Technology]

Página de inicio	http://www.microchip.com

Logo

10 / 40 page

MCP23008/MCP23S08

DS21919B-page 10

1.6.3

INTERRUPT-ON-CHANGE

CONTROL (GPINTEN) REGISTER

The GPINTEN register controls the interrupt-on-

change feature for each pin.

If a bit is set, the corresponding pin is enabled for

interrupt-on-change.

The

DEFVAL

and

INTCON

registers must also be configured if any pins are

enabled for interrupt-on-change.

GPINTEN – INTERRUPT-ON-CHANGE PINS (ADDR 0x02)

R/W-0

GPINT7

GPINT6

GPINT5

GPINT4

GPINT3

GPINT2

GPINT1

GPINT0

bit 7

bit 0

bit 7-0

GPINT7:GPINT0: General purpose I/O interrupt-on-change bits <7:0>.

= Enable GPIO input pin for interrupt-on-change event.

= Disable GPIO input pin for interrupt-on-change event.

Refer to INTCON and GPINTEN.

Legend:

R = Readable bit

W = Writable bit

U = Unimplemented bit, read as ‘0’

- n = Value at POR

‘1’ = Bit is set

‘0’ = Bit is cleared

x = Bit is unknown

MCP23008-E/SS Datasheet(PDF) 10 Page - Microchip Technology