Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: 763.544.3164 • www.bannerengineering.com • sensors@bannerengineering.com

LED..A80X80QPMA Series Area Lights

P/N 119700

WARRANTY: Banner Engineering Corp. warrants its products to be free from defects

for one year. Banner Engineering Corp. will repair or replace, free of charge, any product

of its manufacture found to be defective at the time it is returned to the factory during

the warranty period. This warranty does not cover damage or liability for the improper

application of Banner products. This warranty is in lieu of any other warranty either

expressed or implied.

®

Accessory Mounting Brackets

SMBABM

• 13-ga. zinc-plated low-carbon steel

• (4) M4 Phillips flathead screws included

• For mounting light from front

SMBACM

• 14-ga. zinc-plated low-carbon steel

• (4) M4 socket-head cap screws, washers and

hex key included

• For mounting light from rear

86.4 mm

(3.40")

60.9 mm

(2.40")

40.6 mm

(1.60")

2.2 mm

(0.09")

2x 12.7 mm

(0.50")

10.2 mm

(0.40")

30.5 mm

(1.20")

8.8 mm

(0.35")

5.1 mm

(0.20")

4.7 mm

(0.18")

2x Ø4.6 mm

(0.18")

C'sink ø8.3 mm

(0.33")

110.2 mm

(4.34")

10.2 mm

(0.40")

2x 22.9 mm

(0.90")

55.1 mm

(2.17")

94.0 mm

(3.70")

15.8 mm

(0.62")

61.0 mm

(2.40")

92.5 mm

(3.64")

8.1 mm

(0.32")

46.2 mm

(1.82")

2x 14.9 mm

(0.59")

2x M6 x 1

1/4-20

110.4 mm

(4.35")

92.6 mm

(3.65")

46.2 mm

(1.81")

13.8 mm

(0.54")

94.0 mm

(3.70")

61.0 mm

(2.40")

15.8 mm

(0.62")

8.2 mm

(0.32")

4x M4 x 0.7

(7.1 mm Deep)

Figure 1. Area light dimensions