Product Specification

31 / 31

LM185WH2

Liquid Crystal Display

Ver. 1.0

JUN., 21, 2010

Since a module is composed of electronic circuits, it is not strong to electrostatic discharge.

Make certain that treatment persons are connected to ground through wrist band etc. And

don’t touch interface pin directly.

9-3. Electrostatic discharge control

Strong light exposure causes degradation of polarizer and color filter.

9-4. Precautions for strong light exposure

When storing modules as spares for a long time, the following precautions are necessary.

(1) Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep

the temperature between 5°C and 35°C at normal humidity.

(2) The polarizer surface should not come in contact with any other object.

It is recommended that they be stored in the container in which they were shipped.

9-5. Storage

9-6. Handling precautions for protection film

When the protection film is peeled off, static electricity is generated between

the film and polarizer. This should be peeled off slowly and carefully by people who are

electrically grounded and with well ion-blown equipment or in such a condition, etc.

(2) When the module with protection film attached is stored for a long time,

sometimes there remains a very small amount of glue still on the bezel

after the protection film is peeled off.

(3) You can remove the glue easily. When the glue remains on the bezel surface or

its vestige is recognized, please wipe them off with absorbent cotton waste or

other soft material like chamois soaked with normal-hexane.

PDF created with pdfFactory Pro trial version www.pdffactory.com