136

Outside shield

Jacket

Drain wire

Drain wire

Signal wires

Conductive tape

Wire

Center terminal

Insulator

GT17V-10DS-HU Harness Finish

Outer terminal

Shield Cover

Housing

Retainer

*Crimp height setting tables are available for each cable type. Please contact your nearest Hirose Electric account representative.

Different cables will require different crimp height settings.

Strip the Jacket.

1

Cut the shield and intermediate material to

expose the wire and braid.

2

Bend back the drain wire over the Jacket.

3

Wrap with conductive tape.

4

Strip the wire leads.

5

Crimp the center terminals.

6

Insert the center terminals into the insulator.

7

Insert the insulator into the Outer terminal.

8

Insert the Shield Cover.

9

Fold back the Outer terminal.

10

Crimp the Outer terminal.

11

Insert the Outer terminal into the housing.

12

Insert the retainer.

13

Completion

14

BWiring Method