SynchronizationSystem datasheet(2/4 Pages) IDT

2 / 4 page

April 5, 2017

82P33914-1 Datasheet

DESCRIPTION

IEEE 1588-2008 Precision Time Protocol (PTP) is a packet-based syn-

chronization mechanism used in packet-switched networks. PTP synchro-

nizes the clocks of different devices with the most accurate clock on the

network – usually a precise, grandmaster clock, such as one using a Pri-

mary Reference Time Clock (PRTC) time signal. The 82P33914-1 is a soft-

ware and hardware system that can operate as a PTP slave or PTP

master. As a PTP slave the 82P33914-1 recovers accurate and stable

electrical synchronization signals from a packet based reference gener-

ated by a PTP master. As a PTP master the 82P33914-1 can lock to a sta-

ble electrical clock source and generate packet based PTP references for

downstream PTP slaves

The 82P33914-1 is available with several software and hardware options.

The software options are outlined in Table 1 by root part number. The

hardware options depend on the choice of Synchronization Management

Unit (SMU) hardware; the SMU hardware documentation is listed in

Table 3 by root part number.

System Component Documentation

The detailed characteristics of the 82P33914-1 software and hardware

components are described in other documents as shown in Table 2 and

Table 3.

Table 1: Software Options by Root Part Number

Root Part Number

Included Software

82P33914

IDT clock recovery servo software

82P33914-1

IDT clock recovery servo software

IEEE 1588 Protocol Stack

Table 2: Software Documentation

Software System Component

Software Documentation

82P33914-1 IEEE 1588 software

Please contact IDT

Table 3: SMU Hardware Documentation

Root Part Number

Documentation

82P33914

82P33914-1

82P338

14 datasheet

SynchronizationSystem Datasheet(PDF) 2 Page - Integrated Device Technology

SynchronizationSystem Datasheet(HTML) 2 Page - Integrated Device Technology

Html Pages

1 2 3 4

Datasheet Descarga

Enlace URL