40 mF

10 F

1 k

10 k

100

REF20xx

EN

GND

2-Pole High-pass

4-Pole Low-pass

0.1 Hz to 10 Hz Filter

To scope

0.1 F

Time (1 s/div)

C028

Time (1 s/div)

C029

15

REF2025, REF2030, REF2033, REF2041

www.ti.com

SBOS600C – MAY 2014 – REVISED JANUARY 2017

Product Folder Links: REF2025 REF2030 REF2033 REF2041

Submit Documentation Feedback

Copyright © 2014–2017, Texas Instruments Incorporated

8.3 Noise Performance

Typical 0.1-Hz to 10-Hz voltage noise can be seen in Figure 45 and Figure 46. Device noise increases with

output voltage and operating temperature. Additional filtering can be used to improve output noise levels,

although care should be taken to ensure the output impedance does not degrade ac performance. Peak-to-peak

noise measurement setup is shown in Figure 47.

Figure 47. 0.1-Hz to 10-Hz Noise Measurement Setup