MP6513 datasheet(3/11 Pages) MPS

3 / 11 page

MP6513 – 2.5V - 21V, 0.8A, H-BRIDGE MOTOR DRIVER IN A TSOT23-6

MP6513 Rev. 1.0

www.MonolithicPower.com

3/23/2016

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

ABSOLUTE MAXIMUM RATINGS

(1)

Supply voltage (VCC) .....................-0.3V to +23V

VOUTx ....................................-0.3V to VCC + 0.3V

All other pins ...................................-0.3V to +6V

Continuous power dissipation (TA = +25°C)

(2)

................................................................. 1.14W

Junction temperature ................................150°C

Lead temperature .....................................260°C

Storage temperature.................. -60°C to 150°C

Recommended Operating Conditions

(3)

Supply voltage (VCC) ........................2.5V to 21V

Operating junction temp. (TJ) ... -40°C to +125°C

Thermal Resistance

(4)

θJA

θJC

TSOT23-6………………..…..110……55....°C/W

NOTES:

1) Exceeding these ratings may damage the device.

2) The maximum allowable power dissipation is a function of the

maximum junction temperature TJ (MAX), the junction-to-

ambient thermal resistance θJA, and the ambient temperature

TA. The maximum allowable continuous power dissipation at

any ambient temperature is calculated by PD (MAX) = (TJ

(MAX)-TA)/θJA. Exceeding the maximum allowable power

dissipation produces an excessive die temperature, causing

the regulator to go into thermal shutdown. Internal thermal

shutdown circuitry protects the device from permanent

damage.

3) The device is not guaranteed to function outside of its

operating conditions.

4) Measured on JESD51-7, 4-layer PCB.

MP6513 Datasheet(PDF) 3 Page - Monolithic Power Systems