ISL6294 datasheet(2/9 Pages) RENESAS

2 / 9 page

ISL6294

FN9174 Rev 4.00

Page 2 of 9

Jul 9, 2007

Absolute Maximum Ratings (Reference to GND)

Thermal Information

VIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to 30V

IMIN, IREF, BAT, CHG, EN, PPR . . . . . . . . . . . . . . . . . . . -0.3V to 7V

ESD Rating

Human Body Model (Per EIA JESD22 Method A114-B) . . . . .7kV

Machine Model (Per EIA JED-4701 Method C-111). . . . . . . .450V

Recommended Operating Conditions

Ambient Temperature Range . . . . . . . . . . . . . . . . . . .-40°C to +85°C

Maximum Supply Voltage (VIN Pin). . . . . . . . . . . . . . . . . . . . . . 28V

Operating Supply Voltage (VIN Pin). . . . . . . . . . . . . . . . 4.5V to 6.5V

Programmed Charge Current (DFN) . . . . . . . . . . . 100mA to 900mA

Programmed Charge Current (SOIC) . . . . . . . . . . 100mA to 600mA

Thermal Resistance

JA (°C/W) JC (°C/W)

DFN Package (Notes 1, 2) . . . . . . . . . .

4.5

SOIC Package (Notes 1, 2) . . . . . . . . .

Maximum Junction Temperature (Plastic Package) . . . . . . . +150°C

Maximum Storage Temperature Range . . . . . . . . . .-65°C to +150°C

Pb-free reflow profile . . . . . . . . . . . . . . . . . . . . . . . . . .see link below

http://www.intersil.com/pbfree/Pb-FreeReflow.asp

CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and

result in failures not covered by warranty.

NOTES:

JA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See

Tech Brief TB379.

2. For

JC, the “case temp” location is the center of the exposed metal pad on the package underside.

Electrical Specifications

Typical Values Are Tested at VIN = 5V and the Ambient Temperature at +25°C. All Maximum and Minimum

Values Are Guaranteed Under the Recommended Operating Supply Voltage Range and Ambient Temperature

Range, Unless Otherwise Noted.

PARAMETER

SYMBOL

TEST CONDITIONS

MIN

TYP

MAX

UNITS

POWER-ON RESET

Rising POR Threshold

VPOR

VBAT = 3.0V, use PPR to indicate the

comparator output.

3.3

3.9

4.3

Falling POR Threshold

VPOR

3.1

3.6

4.15

VIN-BAT OFFSET VOLTAGE

Rising Edge

VOS

VBAT = 4.0V, use CHG pin to indicate the

comparator output (Note 3)

150

Falling Edge

VOS

OVERVOLTAGE PROTECTION

Overvoltage Protection Threshold

VOVP

(Note 4)

Use PPR to indicate the comparator output

6.5

6.8

7.1

OVP Threshold Hysteresis

100

240

400

STANDBY CURRENT

BAT Pin Sink Current

ISTANDBY Charger disabled or the input is floating

1.0

µA

VIN Pin Supply Current

IVIN

Charger disabled

300

400

µA

VIN Pin Supply Current

IVIN

Charger enabled

400

600

µA

VOLTAGE REGULATION

Output Voltage

VCH

4.3V < VIN < 6.5V, charge current = 20mA

4.158

4.20

4.242

PMOS On Resistance

rDS(ON)

VBAT = 3.8V, charge current = 0.5A

0.6



CHARGE CURRENT (Note 5)

IREF Pin Output Voltage

IIREF

VBAT = 3.8V

1.18

1.22

1.26

Constant Charge Current

ICHG

RIREF = 24.3k, VBAT = 2.8V to 4.0V

450

500

550

Trickle Charge Current

ITRK

RIREF = 24.3k, VBAT = 2.4V

130

End-of-Charge Current

IMIN

RIMIN = 243k

EOC Rising Threshold

RIMIN = 243k

325

380

415

PRECONDITIONING CHARGE THRESHOLD

Preconditioning Charge Threshold Voltage

VMIN

2.45

2.55

2.65

Preconditioning Voltage Hysteresis

VMINHYS

100

150

ISL6294 Datasheet(PDF) 2 Page - Renesas Technology Corp

ISL6294 Datasheet(HTML) 2 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9

Datasheet Descarga

Enlace URL