SST12LP22 datasheet(5/17 Pages) MICROCHIP

5 / 17 page

 2014 Microchip Technology Inc.

Preliminary

DS70005206A-page 5

SST12LP22

4.0

ELECTRICAL SPECIFICATIONS

The DC and RF specifications for the power amplifier

are specified below. Refer to Table 4-2 for the DC volt-

age and current specifications.

Absolute Maximum Stress Ratings (Applied conditions greater than those listed under “Absolute Maxi-

mum Stress Ratings” may cause permanent damage to the device. This is a stress rating only and func-

tional operation of the device at these conditions or conditions greater than those defined in the operational

sections of this data sheet is not implied. Exposure to absolute maximum stress rating conditions may

affect device reliability.)

Input power to pin 1 (PIN)1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +12 dBm

1. Maximum input power for VCC = 5V with 50% duty cycle, 802.11g 54 Mbps, with maximum output VSWR = 10:1. At VCC = 5V,

a 10

Ω resistor must be included on V

CC1, as shown in Figures 5-8 and 5-9.

Supply voltage at pins 4, 10, 11, 13 and 15 (VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +4.2 V

Reference voltage to pin 2 (VREF1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +3.2 V

DC supply current (ICC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180 mA

Operating Temperature (TA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40ºC to +85ºC

Storage Temperature (TSTG) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40ºC to +120ºC

Maximum Junction Temperature (TJ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +150ºC

Surface Mount Solder Reflow Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C for 10 seconds

TABLE 4-1:

OPERATING RANGE

Range

Ambient Temp

VCC

Industrial

-40°C to +85°C

3.3V

TABLE 4-2:

DC ELECTRICAL CHARACTERISTICS AT 25ºC

Symbol

Parameter

Min.

Typ

Max.

Unit

VCC

Supply Voltage

3.0

3.3

3.6

ICC

DC Current for 802.11g, 22 dBm

135

ICQ

Idle Current

VREG

Reference Voltage see Figure 5-8 on page 10

2.9

2.95

3.2

IREG

Reference Current

3mA

SST12LP22 Datasheet(PDF) 5 Page - Microchip Technology

SST12LP22 Datasheet(HTML) 5 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Datasheet Descarga

Enlace URL