S30-R68 Price, Reseller, Stock

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. TNC Male to N Male Low Loss Cable 300 Inch Length Using LMR-400-UF Coax with HeatShrink., Radio frequency assembly TNC male to N male low loss cable 300 inch length using LMR-400-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to N male low loss cable 300 inch length using LMR-400-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and N type cable connection on the other. Our low loss TNC to type N cable assemblies have a male gender on end 1 and male on end 2. PE3W00633/HS-300 can also be known as a low loss TNC plug to N type plug cable assembly and will be shipped same-day as it is purchased. TNC plug to type N plug cable assembly PE3W00633/HS-300 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00633/HS-300 can also be used in the other direction and will be N type male to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to N type cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to N male low loss cable 300 inch length using LMR-400-UF coax with heatshrink.

1 : $222.99
25 : $211.84
50 : $200.69
100 : $191.77

639

PE3C2279LF/HS-300

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-200-UF, RF Cable Type: LMR-200-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. N Male to SMA Male Low Loss Cable 300 Inch Length Using LMR-200-UF Coax with Times Microwave Components with HeatShrink, LF Solder., Radio frequency assembly N male to SMA male low loss cable 300 inch length using LMR-200-UF coax with Times Microwave components with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to SMA male low loss cable 300 inch length using LMR-200-UF coax with Times Microwave components with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a SMA cable connection on the other. Our low loss type N to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C2279LF/HS-300 can also be known as a low loss type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2279LF/HS-300 RF cable has a TPE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Type N plug to SMA plug cable assembly PE3C2279LF/HS-300 is built with LMR-200-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2279LF/HS-300 can also be used in the other direction and will be a SMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $190.99
10 : $187.17
25 : $183.35
100 : $179.53

426

PE3W13835/HS-300

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FME, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. N Male to FME Plug Low Loss Cable 300 Inch Length Using LMR-195-UF Coax with HeatShrink., Radio frequency assembly N male to FME plug low loss cable 300 inch length using LMR-195-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to FME plug low loss cable 300 inch length using LMR-195-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to FME cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a FME cable connection on the other. Our low loss type N to FME cable assembly has a male gender on end 1 and a plug on end 2. PE3W13835/HS-300 can also be known as a low loss type N plug to FME male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W13835/HS-300 RF cable has a TPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. Type N plug to FME male cable assembly PE3W13835/HS-300 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to FME cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W13835/HS-300 can also be used in the other direction and will be a FME plug to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to FME male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to FME cable assembly for quick shipment worldwide. Variations of type N and FME cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to FME low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $209.99
10 : $205.79
25 : $201.59
100 : $197.39

373

PE3W05647LF/HS-300

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. N Male Right Angle to N Male Low Loss Cable 300 Inch Length Using LMR-400-UF Coax with HeatShrink, LF Solder., Radio frequency assembly N male right angle to N male low loss cable 300 inch length using LMR-400-UF coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to N male low loss cable 300 inch length using LMR-400-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a type N cable connection on the other. Our low loss right angle type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W05647LF/HS-300 can also be known as a low loss right angle type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05647LF/HS-300 RF cable has a TPE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Type N plug to type N plug cable assembly PE3W05647LF/HS-300 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with tri-metal plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W05647LF/HS-300 can also be used in the other direction and will be a type N male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $233.99
10 : $229.31
25 : $224.63
100 : $219.95

313

PE3C6723/HS-300

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. TNC Male to BNC Male Low Loss Cable 300 Inch Length Using LMR-400-UF Coax with Times Microwave Components with HeatShrink., Radio frequency assembly TNC male to BNC male low loss cable 300 inch length using LMR-400-UF coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to BNC male low loss cable 300 inch length using LMR-400-UF coax with Times Microwave components with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and BNC cable connection on the other. Our low loss TNC to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C6723/HS-300 can also be known as a low loss TNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to BNC plug cable assembly PE3C6723/HS-300 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6723/HS-300 can also be used in the other direction and will be BNC male to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to BNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to BNC male low loss cable 300 inch length using LMR-400-UF coax with Times Microwave components with heatshrink.

1 : $201.99
25 : $191.89
50 : $181.79
100 : $173.71

303

PE3C3036/HS-300

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. N Male to TNC Male Low Loss Cable 300 Inch Length Using LMR-400-UF Coax With Times Microwave Components with HeatShrink., Radio frequency assembly N male to TNC male low loss cable 300 inch length using LMR-400-UF coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male low loss cable 300 inch length using LMR-400-UF coax with Times Microwave components with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and TNC cable connection on the other. Our low loss type N to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C3036/HS-300 can also be known as a low loss type N plug to TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3C3036/HS-300 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3036/HS-300 can also be used in the other direction and will be TNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male low loss cable 300 inch length using LMR-400-UF coax with Times Microwave components with heatshrink.

1 : $218.99
25 : $208.04
50 : $197.09
100 : $188.33

303

PE3C1489/HS-300

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. TNC Male to TNC Male Right Angle Low Loss Cable 300 Inch Length Using LMR-240-UF Coax with HeatShrink., Radio frequency assembly TNC male to TNC male right angle low loss cable 300 inch length using LMR-240-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male right angle low loss cable 300 inch length using LMR-240-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and right angle TNC cable connection on the other. Our low loss TNC to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C1489/HS-300 can also be known as a low loss TNC plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3C1489/HS-300 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1489/HS-300 can also be used in the other direction and will be right angle TNC male to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male right angle low loss cable 300 inch length using LMR-240-UF coax with heatshrink.

1 : $173.99
25 : $165.29
50 : $156.59
100 : $149.63

248

PE3C4529/HS-300

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. N Male to N Female Low Loss Cable 300 Inch Length Using LMR-240-UF Coax with HeatShrink., Radio frequency assembly N male to N female low loss cable 300 inch length using LMR-240-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N female low loss cable 300 inch length using LMR-240-UF coax with heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and N type cable connection on the other. Our low loss type N to type N cable assemblies have a male gender on end 1 and female on end 2. This N type to type N cable is a male to female coax assembly, PE3C4529/HS-300, can also be known as a low loss type N plug to N type jack cable assembly and will be shipped same-day as it is purchased. Type N plug to type N jack cable assembly PE3C4529/HS-300 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4529/HS-300 can also be used in the other direction and will be N type female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to N type jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female low loss cable 300 inch length using LMR-240-UF coax with heatshrink.

1 : $173.99
25 : $165.29
50 : $156.59
100 : $149.63

248

PE3C0987/HS-300

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. BNC Male to BNC Male Low Loss Cable 300 Inch Length Using LMR-240-UF Coax with HeatShrink., Radio frequency assembly BNC male to BNC male low loss cable 300 inch length using LMR-240-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable 300 inch length using LMR-240-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C0987/HS-300 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3C0987/HS-300 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male low loss cable 300 inch length using LMR-240-UF coax with heatshrink.

1 : $156.99
25 : $149.14
50 : $141.29
100 : $135.01

248

PE3C1359/HS-300

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. N Male Right Angle to N Male Right Angle Low Loss Cable 300 Inch Length Using LMR-240-UF Coax with HeatShrink., Radio frequency assembly N male right angle to N male right angle low loss cable 300 inch length using LMR-240-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to N male right angle low loss cable 300 inch length using LMR-240-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a right angle type N cable connection on the other. Our low loss right angle type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C1359/HS-300 can also be known as a low loss right angle type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1359/HS-300 RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our right angle type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C1359/HS-300 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N right angle plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $267.99
10 : $262.63
25 : $257.27
100 : $251.91

141

PE3W12537/HS-300

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. Reverse Polarity SMA Male Right Angle to N Male Right Angle Low Loss Cable 300 Inch Length Using LMR-195-UF Coax with HeatShrink., Radio frequency assembly reverse polarity SMA male right angle to N male right angle low loss cable 300 inch length using LMR-195-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The reverse polarity SMA male right angle to N male right angle low loss cable 300 inch length using LMR-195-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle reverse polarity SMA cable connection on one end and a right angle type N cable connection on the other. Our low loss right angle reverse polarity SMA to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3W12537/HS-300 can also be known as a low loss right angle reverse polarity SMA plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W12537/HS-300 RF cable has a TPE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. Our right angle SMA male to right angle type N male cable has a maximum VSWR of 1.4:1. Reverse polarity SMA plug to type N plug cable assembly PE3W12537/HS-300 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with right angle SMA to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W12537/HS-300 can also be used in the other direction and will be a right angle type N male to right angle reverse polarity SMA male cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity right angle plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $303.99
10 : $297.91
25 : $291.83
100 : $285.75

118

PE3C8936/HS-300

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. BNC Male to BNC Male Low Loss Cable 300 Inch Length Using LMR-195-UF Coax with HeatShrink., Radio frequency assembly BNC male to BNC male low loss cable 300 inch length using LMR-195-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable 300 inch length using LMR-195-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss BNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3C8936/HS-300 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C8936/HS-300 RF cable has a TPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. Our BNC male to BNC male cable has a maximum VSWR of 1.5:1. BNC plug to BNC plug cable assembly PE3C8936/HS-300 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $175.99
10 : $172.47
25 : $168.95
100 : $165.43

PE3W07119/HS-300

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. SMA Male to TNC Male Right Angle Low loss Cable 300 Inch Length Using LMR-400-UF Coax with Times Microwave Components with HeatShrink., Radio frequency assembly SMA male to TNC male right angle low loss cable 300 inch length using LMR-400-UF coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male right angle low loss cable 300 inch length using LMR-400-UF coax with Times Microwave components with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a right angle TNC cable connection on the other. Our low loss SMA to right angle TNC cable assembly has a male gender on end 1 and a male on end 2. PE3W07119/HS-300 can also be known as a low loss SMA plug to right angle TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W07119/HS-300 RF cable has a TPE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our SMA male to right angle TNC male cable has a maximum VSWR of 1.4:1. SMA plug to TNC plug cable assembly PE3W07119/HS-300 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W07119/HS-300 can also be used in the other direction and will be a right angle TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $160.99
10 : $157.77
25 : $154.55
100 : $151.33

PE3W07119LF/HS-300

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. TNC Male Right Angle to SMA Male Low Loss Cable 300 Inch Length Using LMR-400-UF Coax Times Microwave Components with HeatShrink, LF Solder., Radio frequency assembly TNC male right angle to SMA male low loss cable 300 inch length using LMR-400-UF coax Times Microwave components with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to SMA male low loss cable 300 inch length using LMR-400-UF coax Times Microwave components with heatshrink, LF solder, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and SMA cable connection on the other. Our low loss right angle TNC to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W07119LF/HS-300 can also be known as a low loss right angle TNC plug to SMA plug cable assembly and will be shipped same-day as it is purchased. TNC plug to SMA plug cable assembly PE3W07119LF/HS-300 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC right angle male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07119LF/HS-300 can also be used in the other direction and will be SMA male to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to SMA male low loss cable 300 inch length using LMR-400-UF coax Times Microwave components with heatshrink, LF solder.

1 : $233.99
25 : $222.29
50 : $210.59
100 : $201.23

PE3C10058/HS-300

Pasternack Enterprises

Key Specifications, Connector 1 Series: Mini UHF, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini UHF, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. Mini UHF Male to Mini UHF Female Low Loss Cable 300 Inch Length Using LMR-195-UF Coax with HeatShrink., Radio frequency assembly mini UHF male to mini UHF female low loss cable 300 inch length using LMR-195-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The mini UHF male to mini UHF female low loss cable 300 inch length using LMR-195-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini UHF to mini UHF cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a mini UHF cable connection on one end and a mini UHF cable connection on the other. Our low loss mini UHF to mini UHF cable assembly has a male gender on end 1 and a female on end 2. PE3C10058/HS-300 can also be known as a low loss mini UHF plug to mini UHF jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10058/HS-300 RF cable has a TPE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. Mini UHF plug to mini UHF jack cable assembly PE3C10058/HS-300 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible Mini UHF cable assembly is manufactured with mini UHF to mini UHF cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10058/HS-300 can also be used in the other direction and will be a mini UHF female to mini UHF male cable assembly if the opposite connectivity is required. Low loss mini UHF plug to mini UHF jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini UHF to mini UHF cable assembly for quick shipment worldwide. Variations of mini UHF cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal Mini UHF to Mini UHF low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $192.99
10 : $189.13
25 : $185.27
100 : $181.41

Teledyne HiRel

DM54LS30E/883

Teledyne HiRel

NAND GATE, 8-INPUT

AM26LS30BFA

Teledyne HiRel

LINE DRIVER, DUAL DIFFERENTIAL RS-422 PARTY LINE/QUAD SINGLE ENDED RS-423

AM26LS30BEA

Teledyne HiRel

LINE DRIVER, DUAL DIFFERENTIAL RS-422 PARTY LINE/QUAD SINGLE ENDED RS-423

AM26LS30B2A

Teledyne HiRel

LINE DRIVER, DUAL DIFFERENTIAL RS-422 PARTY LINE/QUAD SINGLE ENDED RS-423

Vyrian

MCP1826S-3002E/EB

Microchip Technology Inc

Fixed Positive LDO Regulator, 3V, 0.4V Dropout, CMOS, PSSO3
RoHS : Compliant

14,700

MAX16072RS30D1+

Analog Devices Inc

9,250

XS6W-6LSZH8SS300CM-B

OMRON Corporation

Cable Assembly
RoHS : Compliant

7,000

MAX16073RS30D2+T

Analog Devices Inc

5,700

XS6W-6LSZH8SS30CM-Y

OMRON Corporation

Cable Assembly, 8 Conductor(s), 27AWG
RoHS : Compliant

5,350

MAX6389XS30D1+T

Analog Devices Inc

Power Supply Support Circuit, Fixed, 1 Channel, +3V, BICMOS, PDSO4
RoHS : Compliant

1,600

MAX6384XS30D5

Analog Devices Inc

1,200

MAX6385XS30D6-T

Analog Devices Inc

1,150

MAX6385XS30D7+

Analog Devices Inc

Power Management Circuit, Adjustable, 1 Channel, +3V, BICMOS, PDSO4
RoHS : Compliant

680

MAX6386XS30D5+

Analog Devices Inc

410

XCS30-3PQG208I

AMD Xilinx

Field Programmable Gate Array, 576 CLBs, 10000 Gates, 125MHz, CMOS, PQFP208
RoHS : Compliant

380

MAX6387XS30D3+

Analog Devices Inc

Power Management Circuit, Adjustable, 1 Channel, +3V, BICMOS, PDSO4
RoHS : Compliant

320

MAX6388XS30D2

Analog Devices Inc

170

XCS300E-6PQ208I

AMD Xilinx

Field Programmable Gate Array, 357MHz, 6912-Cell, CMOS, PQFP208
RoHS : Not Compliant

XCS30XL-5TQG144C

AMD Xilinx

Field Programmable Gate Array, 576 CLBs, 10000 Gates, 250MHz, 1368-Cell, CMOS, PQFP144
RoHS : Compliant

Win Source Electronics

RB520S-30-TP

Micro Commercial Components

DIODE SCHOTTKY 30V 200MA SOD523
RoHS : Compliant

10,140 : $0.0296
7,580 : $0.033
5,870 : $0.0341
4,250 : $0.0353
2,750 : $0.0364
1,130 : $0.0444

990,000

RB521CS-30 T2R

ROHM Semiconductor

8,155 : $0.0412
6,530 : $0.0429
5,030 : $0.0446
3,515 : $0.0478
2,265 : $0.0495
1,060 : $0.0529

144,850

NSVRB521S30T1G

onsemi

DIODE SCHOTTKY 30V 200MA SOD523
RoHS : Compliant

4,540 : $0.074
3,635 : $0.0771
2,800 : $0.0801
1,955 : $0.0861
1,260 : $0.0892
590 : $0.0951

100,000

PBSS303PZ

Nexperia

30 V, 5.3 A PNP low VCEsat (BISS) transistor
RoHS : Compliant

82 : $4.1123
66 : $4.2794
51 : $4.4466
36 : $4.7809
23 : $4.9482
11 : $5.2825

92,000

IPD80N04S3-06

Infineon Technologies AG

MOSFET N-CH 40V 90A TO252-3
RoHS : Compliant

152 : $1.9862
113 : $2.2154
88 : $2.2918
64 : $2.3682
41 : $2.4446
17 : $2.9793

88,888

RB520CS-30T2R

ROHM Semiconductor

DIODE SCHOTTKY 30V 100MAVMN2
RoHS : Compliant

8,000 : $0.0375
5,985 : $0.0418
4,620 : $0.0433
3,360 : $0.0447
2,165 : $0.0462
890 : $0.0562

68,153

ESDS304DBV

Texas Instruments

TVS Diode 4-Channel 5.5V SOT-23-6

1,515 : $0.1985
1,130 : $0.2214
875 : $0.2291
635 : $0.2367
410 : $0.2443
170 : $0.2978

66,000

STS30-DIS

Sensirion

STS30-DIS Sensirion Board Mount Temperature Sensors Calibrated Digital Temperature Sensor datasheet, inventory, & pricing.

240 : $1.4125
180 : $1.5756
140 : $1.6299
100 : $1.6843
65 : $1.7386
30 : $2.1188

41,125

BAS3010B-03W

Infineon Technologies AG

Medium Power AF Schottky Diode
RoHS : Compliant

320 : $0.939
260 : $0.9771
200 : $1.0153
140 : $1.0917
90 : $1.1298
45 : $1.2062

35,186

1PS302

Nexperia

High-speed double diode
RoHS : Compliant

6,440 : $0.0466
5,155 : $0.0485
3,970 : $0.0504
2,770 : $0.0542
1,785 : $0.0561
835 : $0.0599

27,000

VS-30BQ040-M3/9AT

Vishay Huntington

DIODE SCHOTTKY 3.0A SMC

1,910 : $0.1573
1,530 : $0.1637
1,180 : $0.17
825 : $0.1828
530 : $0.1892
250 : $0.202

25,460

AFE44S30YZR

Texas Instruments

AFE4430 WITH SPI / Channel AFE Bit 30-DSBGA
RoHS : Compliant

202 : $1.4886
151 : $1.6604
117 : $1.7176
85 : $1.7749
55 : $1.8321
23 : $2.2329

9,190

STPS3045CG-TR

STMicroelectronics

DIODE ARRAY SCHOTTKY 45V D2PAK
RoHS : Compliant

425 : $0.7082
320 : $0.7899
245 : $0.8171
180 : $0.8444
115 : $0.8716
50 : $1.0623

6,000

MAX6315US30D4+T

Maxim Integrated Products

IC RESET CIRCUIT 3.00V SOT143-4
RoHS : Compliant

415 : $0.8146
310 : $0.9085
240 : $0.9399
175 : $0.9713
115 : $1.0025
50 : $1.2218

3,500

STPS30150CFP

STMicroelectronics

Rectifier Diode Schottky 150V 30A 3-Pin(3+Tab) TO-220FPAB Tube / DIODE ARRAY SCHOTTKY 150V TO220F
RoHS : Compliant

153 : $1.9697
114 : $2.197
88 : $2.2728
64 : $2.3485
42 : $2.4243
17 : $2.9546

1,000

Wuhan P&S

VS-30BQ040-M3/9AT

Vishay Intertechnologies

3A, 40V, High Performance Schottky Rectifier
RoHS : Compliant

1 : $0.85
100 : $0.34
500 : $0.32
1,000 : $0.31

31,500

VS-30CPQ100-N3

Vishay Intertechnologies

Schottky Rectifier, 2x15A, 100V
RoHS : Compliant

1 : $11.4
100 : $4.56
500 : $4.22
1,000 : $4.11

4,500

VS-30CPQ060PBF

Vishay Intertechnologies

60V,2 x 15A,Schottky Rectifier
RoHS : Compliant

1 : $2.72
100 : $0.98
500 : $0.71
1,000 : $0.66

500

S30-R68 Reseller

Enlace URL