P100SLASH2528SLASHB Price, Reseller, Stock

Key Specifications, Antenna Type: Log Periodic, Polarization: Vertical, Minimum Frequency: 790 MHz, Maximum Frequency: 2.7 GHz, Connector 1 Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm, Nominal Gain: 10 dBi, Maximum Input VSWR: 1.7:1. 10-10.5-11 dBi Log Periodic Antenna 790-960 MHz, 1.71-2.17 GHz, 2.3-2.7 GHz, N Type Female, V-pol, 1.7:1 Max VSWR., Pasternack’s PEANLP1006 directional log periodic, is in stock at our production facility certified to ISO 9001:2015 that ship same day internationally. The 10-10.5-11 dBi log periodic Antenna operates within a range of 790 MHz-2.7 GHz and comes with N Type female Connector which is ideal for boosting 5G, LTE, CMDA, LoRA, IoT and WIFI. Manufactured to the highest international standards, our commercial grade, vertical polarized log periodic antenna with heavy duty steel mast mounting brackets and a lightweight abs radome is ideally suited for all weather operation. The directional antenna with band 1 frequency range of 790 MHz to 960 MHz, gain of 10, VSWR max of 1.7:1 at F1; and band 2 with a frequency range of 1.71 GHz to 2.17 GHz, gain of 10.5 and VSWR max of 1.5:1 at F2, eliminates the need for different antennas and enable using the same antenna for a wide array of telecommunication applications where wide coverage is desired. Pasternack's type N connectorized PEANLP1006 antenna has a F1 HPBW Vertical Elevation of 47 Degrees, F2 HPBW Vertical Elevation of 46 Degrees and a HPBW Horizontal Azimuth of 58 Degrees with 100 Watts max input power. The multi band directional antenna has a type N female standard polarity threaded connector, gain nominal of 10-10.5-11 dBi gain and can be used to boost cellular LTE signals. The model PEANLP1006 designed specifically for the outdoors has an operational temperature between -40° to 65° deg C, and can withstand a wind velocity of up to 130.5 MPH. Ideal for boosting existing cellular signals to reach further distances, the antenna has an impedance of 50 Ohms and max input power of 100 Watts. Built tough, this Type N connector has an overall length of 17.4in, width of 2.5in, and weighs 2.4lbs. The mounting pole diameter is between in - in, and operates on the 700 MHz, 800 MHz, 900 MHz, 1.7 GHz, 1.9 GHz, 2 GHz, 2.7 GHz cellular band. Pasternack’s PEANLP1006 with white colored abs Radome has passed through a rigorous Quality Management System (QMS) and comes from a facility certified to ISO 9001:2015. The part number PEANLP1006 is a directional series antenna with a multi band type and has a 10-10.5-11 dBi gain nominal. The included mounting bracket and hardware for this multi band log periodic antenna with abs radome, makes it very easy to install. The directional 700 MHz, 800 MHz, 900 MHz, 1.7 GHz, 1.9 GHz, 2 GHz, 2.7 GHz band antenna with vertical polarization eliminates the need to purchase different antennas for each frequency. Pasternack's experts on high performance 5G / LTE outdoor antennas are on hand to assist you with any inquiries on 10-10.5-11 dBi directional 790 MHz-2.7 GHz N Type female connector antennas. Order our LTE outdoor directional antenna PEANLP1006, 7 days a week, 24 hours a day using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping via UPS or FedEx.

1 : $80.29
25 : $76.28
50 : $72.26
100 : $69.05

866

PE7AP1002-0

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 6 GHz, Impedance: 50 Ohm, Power Maximum: 1 Watt, Attenuation: 0 dB, Connector Series 1: QMA, Connector Gender 1: Male, Connector Series 2: QMA, Connector Gender 2: Female, Body Material: Brass, Body Plating: Tri-Metal. 0 dB Fixed Attenuator, QMA Male to QMA Female Brass Tri-Metal Body Rated to 1 Watt Up to 6 GHz. PE7AP1002-0 is a fixed 0 dB attenuator from Pasternack. This 0dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This QMA attenuator has a male gender on side 1 and a QMA female connector on side 2. The Pasternack PE7AP1002-0 0 dB attenuator is rated for up to 6 GHz. Our microwave attenuator is rated to 1 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP1002-0 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 0dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $90.99
25 : $86.44
50 : $81.89
100 : $78.25

PE7AP1001-20

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 6 GHz, Impedance: 50 Ohm, Power Maximum: 15 Watt, VSWR Maximum: 1.15:1, Attenuation: 20 dB, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Series 2: 4.3-10, Connector Gender 2: Female, Body Material: Aluminum. 20 dB Fixed Attenuator, 4.3-10 Male to 4.3-10 Female Aluminum Body Rated to 15 Watts Up to 6 GHz. PE7AP1001-20 is a fixed 20 dB attenuator from Pasternack. This 20dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 4.3-10 attenuator has a male gender on side 1 and a 4.3-10 female connector on side 2. The Pasternack PE7AP1001-20 20 dB attenuator is rated for up to 6 GHz. Our microwave attenuator is rated to 15 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP1001-20 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 20dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $511.99
10 : $491.51
25 : $471.03

PE51MP1002

Pasternack Enterprises

Key Specifications, Antenna Type: Vehicular, Polarization: Linear, Vertical, Minimum Frequency: 132 MHz, Maximum Frequency: 174 MHz, Connector Series: NMO Mount, Impedance: 50 Ohm, Maximum Input VSWR: 2:1.

1 : $121.99
10 : $112.23
25 : $102.47
100 : $92.71

PEWCP1009

Pasternack Enterprises

1 : $1,450.0
5 : $1,392.0
10 : $1,334.0

PE80P1003

Pasternack Enterprises

Key Specifications, Biased Detector or Zero Biased Detector: Power, Layout: Positive Output Slope, Minimum Frequency: 10 MHz, Maximum Frequency: 18 GHz, Detector Polarity: Positive, Voltage Sensitivity, Typ: 0.5 mV/mW, Tangential Sensitivity, Max: -35 dBm, Power, Max Input: 23 Watts, VSWR, Typ: 1.5:1, VSWR, Max: 1.8:1, Connector In Series: Field Replaceable SMA, Connector-In Group (Threaded, Bayonet): Threaded, Connector In Gender: Male, Connector Out Series: Field Replaceable SMA, Connector-Out Group (Threaded, Bayonet): Threaded, Connector Out Gender: Female, Body Material: Aluminum, Min Operating Temperature: -40 deg C, Max Operating Temperature: 85 deg C. 10 MHz to 18 GHz Power Detector, Positive Output Slope, +23 dBm Max Pin, SMA. The Pasternack power detector PE80P1003 is part of our extensive in-stock RF, microwave and millimeter wave components specifically stocked to be readily available for same-day shipment. The Pasternack radio frequency detector is available in a positive output slope power design. This positive RF power detector is manufactured with threaded Field Replaceable SMA male to Field Replaceable SMA female connectors. The Pasternack power detector with Field Replaceable SMA type connector has a typical voltage sensitivity of 0.5 mV/mW and maximum tangential sensitivity of -35 dBm. This Field Replaceable SMA male to Field Replaceable SMA female detector comes with a maximum VSWR of 1.8:1. Our positive output slope RF power detector has an aluminum body. The PE80P1003 Field Replaceable SMA power detector has a minimum frequency of 10 MHz and a maximum frequency of 18 GHz. This Field Replaceable SMA coaxial RF power detector has a maximum input power of 23 dBm. Our positive output slope RF power detector is designed to operate at temperatures ranging between -40 to +85 deg C. PE80P1003 coaxial Field Replaceable SMA detector is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. Our RF, microwave and millimeter wave products are part of the broadest selection in the industry. This coaxial power Field Replaceable SMA detector is ready to buy and be shipped worldwide. Our power detector can be bought and shipped worldwide on the same-day as Pasternack's other in-stock RF parts.

1 : $2,010.0
5 : $1,929.6
10 : $1,849.2
25 : $1,768.8

PE51LP1002

Pasternack Enterprises

Key Specifications, Antenna Type: Log Periodic, Polarization: Vertical, Connector 1 Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm, Maximum Input VSWR: 1.5:1.

1 : $188.99
10 : $173.87
25 : $158.75
100 : $143.63

PEWCP1008

Pasternack Enterprises

1 : $1,770.0
5 : $1,699.2
10 : $1,628.4

PEWGP1004

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-159, Frequency, Min: 4.64 GHz, Frequency, Max: 7.05 GHz, Insertion Loss, Max: 0.2 dB, VSWR, Max: 1.25:1, Input Power (CW): 1,000 Watts, Body Material: Aluminum, Body Finish: Chromate. WR-159 waveguide pressure window 4.64 GHz to 7.05 GHz frequency, 1000 watts (CW) input power, 1.25:1 max VSWR and aluminum body., Part number PEWGP1004 waveguide vacuum window with 1.25:1 max VSWR by Pasternack is a high-grade product that satisfies demanding customers, meets stringent regulatory requirements, and ships the same day. Waveguide pressure window size WR-159 effectively seals out contaminants and other pollutants when the waveguide is pressurized. This WR-159 waveguide pressure window with 1.25:1 max VSWR is one of many dependable waveguide products that Pasternack has been providing since 1972. The aluminum chromate RF waveguide window, isolates pressurized sections from non-pressurized sections in the waveguide system and provides exceptional RF performance. Pasternack WR 159, PEWGP1004 waveguide vacuum window's tight seal prevents impurities like dust, dirt and condensation from penetrating the pressurized waveguide system. As a trusted supplier to global engineers, we at Pasternack Enterprises promises that our aluminum chromate waveguide pressure window is a safe and reliable product that meets or exceeds your microwave engineering needs. Built tough, WR159 pressure window comes in aluminum body, chromate finish and is used in satellite communication, radar, wireless communications, test instrumentation, and other high power applications. Pasternack's expert RF and Microwave Technical Support Team is available to help you with any inquiries on aluminum chromate, WR-159, 4.64 GHz to 7.05 GHz waveguide frequency range, waveguide pressure window. The well-built, PEWGP1004 WR 159 by Pasternack, is ideally suited for applications in the most challenging conditions. Pasternack Enterprises Inc's vacuum window has an operating frequency between 4.64 GHz and 7.05 GHz and an insertion loss of 0.2 dB Max. Manufactured to the highest international standards, our pressure window with, 1,000 watts (CW) input power and 1.25:1 VSWR (Max) has passed through a rigorous Quality Management System (QMS) and comes from an ISO 9001:2015 certified facility. Our waveguide pressure window with max power handling of 1,000 watts (CW) is used in RF testing and research institutes. Contact our waveguide technical experts or download the PEWGP1004 product data sheet for specifications, dimensions, and CAD drawing on the 1.25:1 Max VSWR WR 159 waveguide pressure window. With a maximum insertion loss of 0.2dB and frequency range of 4.64 GHz-7.05 GHz, the waveguide window comes in a length of 0in, Width of 0in, Height of 0in and Weighs 0.99lbs. Order your WR-159 Size, aluminum chromate 4.64 GHz to 7.05 GHz Frequency, waveguide pressure window, 7 days a week, 24 hours a day using our on-line ordering system with no MOQs (minimum order quantity). We will ship your WR-159 size 0.2dB maximum Insertion loss waveguide pressure window and all your Waveguide accessories same-day via UPS or FedEx.

1 : $631.99
5 : $606.71
10 : $581.43
25 : $556.15

PEWGP1005

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-137, Frequency, Min: 5.38 GHz, Frequency, Max: 8.17 GHz, Insertion Loss, Max: 0.2 dB, VSWR, Max: 1.25:1, Input Power (CW): 1,000 Watts, Body Material: Copper Brass, Body Finish: Passivation. WR-137 waveguide pressure window 5.38 GHz to 8.17 GHz frequency, 1000 watts (CW) input power, 1.25:1 max VSWR and copper brass body., Part number PEWGP1005 waveguide vacuum window with 1.25:1 max VSWR by Pasternack is a high-grade product that satisfies demanding customers, meets stringent regulatory requirements, and ships the same day. Waveguide pressure window size WR-137 effectively seals out contaminants and other pollutants when the waveguide is pressurized. This WR-137 waveguide pressure window with 1.25:1 max VSWR is one of many dependable waveguide products that Pasternack has been providing since 1972. The copper brass passivation RF waveguide window, isolates pressurized sections from non-pressurized sections in the waveguide system and provides exceptional RF performance. Pasternack WR 137, PEWGP1005 waveguide vacuum window's tight seal prevents impurities like dust, dirt and condensation from penetrating the pressurized waveguide system. As a trusted supplier to global engineers, we at Pasternack Enterprises promises that our copper brass passivation waveguide pressure window is a safe and reliable product that meets or exceeds your microwave engineering needs. Built tough, WR137 pressure window comes in copper brass body, passivation finish and is used in satellite communication, radar, wireless communications, test instrumentation, and other high power applications. Pasternack's expert RF and Microwave Technical Support Team is available to help you with any inquiries on copper brass passivation, WR-137, 5.38 GHz to 8.17 GHz waveguide frequency range, waveguide pressure window. The well-built, PEWGP1005 WR 137 by Pasternack, is ideally suited for applications in the most challenging conditions. Pasternack Enterprises Inc's vacuum window has an operating frequency between 5.38 GHz and 8.17 GHz and an insertion loss of 0.2 dB Max. Manufactured to the highest international standards, our pressure window with, 1,000 watts (CW) input power and 1.25:1 VSWR (Max) has passed through a rigorous Quality Management System (QMS) and comes from an ISO 9001:2015 certified facility. Our waveguide pressure window with max power handling of 1,000 watts (CW) is used in RF testing and research institutes. Contact our waveguide technical experts or download the PEWGP1005 product data sheet for specifications, dimensions, and CAD drawing on the 1.25:1 Max VSWR WR 137 waveguide pressure window. With a maximum insertion loss of 0.2dB and frequency range of 5.38 GHz-8.17 GHz, the waveguide window comes in a length of 0in, Width of 0in, Height of 0in and Weighs 0.902lbs. Order your WR-137 Size, copper brass passivation 5.38 GHz to 8.17 GHz Frequency, waveguide pressure window, 7 days a week, 24 hours a day using our on-line ordering system with no MOQs (minimum order quantity). We will ship your WR-137 size 0.2dB maximum Insertion loss waveguide pressure window and all your Waveguide accessories same-day via UPS or FedEx.

1 : $631.99
5 : $606.71
10 : $581.43
25 : $556.15

PE51MP1001

Pasternack Enterprises

1 : $101.99
25 : $96.89
50 : $91.79
100 : $87.71

PE2CP1000

Pasternack Enterprises

Key Specifications, Directionality: Dual Directional, Connector Series: N, Connector Gender: Female, Design: Coupler, Minimum Frequency: 2 MHz, Maximum Frequency: 30 MHz, Maximum Input Power: 2,500 Watt, Coupling Value: 50 dB. Dual Directional 50 dB N Coupler From 2 MHz to 30 MHz Rated To 2500 Watts. RF coupler part number PE2CP1000 from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is dual directional and is manufactured with N ports. Our dual directional coupler design uses N ports that are female gender and 50 Ohm impedance. The Pasternack dual directional coupler design is rated for a minimum frequency of 2 MHz and a maximum frequency of 30 MHz. Dual directional coupler part # PE2CP1000 is constructed with a coupling value of 50 dB and a coupler directivity of 22 dB. This female N dual directional coupler is built with a maximum insertion loss of 0.15 dB and a maximum input power of 2500 watts. Our dual directional coupler design with N connector is rated for a maximum insertion loss of 0.15 dB and a maximum VSWR of 1.25. Additional female N coupler specs for this RF component can be found on its radio frequency dual directional coupler PDF specifications datasheet above. PE2CP1000 dual directional 50 dB N coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts.

1 : $3,760.0
5 : $3,609.6
10 : $3,459.2

PEWSP1007

Pasternack Enterprises

Key Specifications, Waveguide Size 1: WR-90, Flange Size 1: UG-39/U, Waveguide Size 2: WR-90, Flange Size 2: UG-39/U, Length: 4.25 inches, Frequency, Min: 8.2 GHz, Frequency, Max: 12.4 GHz. WR-90 Waveguide Pressurizing Section 4.25 Inch Length, UG-39/U Square Cover Flange from 8.2 GHz to 12.4 GHz. PEWSP1007 90 waveguide section is straight and is 4.25 inches long. This 4.25 inch 90 straight waveguide section from Pasternack is standard and has a UG-39/U flange. Our straight 90 waveguide section with UG-39/U flange has a minimum frequency of 8.2 GHz and a maximum frequency of 12.4 GHz. 90 waveguide section PEWSP1007 is part of over 40,000 RF, microwave and millimeter wave components. Our standard 90 straight waveguide section will ship same the day as it is purchased worldwide as with our other RF parts.

1 : $765.99
5 : $735.35
10 : $704.71

PE3C1074/SP-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. MMCX Plug Right Angle to MMCX Plug Right Angle Low Loss Cable 100 CM Length Using LMR-100 Coax with HeatShrink and 90 Deg. Clock., Radio frequency assembly MMCX plug right angle to MMCX plug right angle low loss cable 100 cm length using LMR-100 coax with heatshrink and 90 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MMCX plug right angle to MMCX plug right angle low loss cable 100 cm length using LMR-100 coax with heatshrink and 90 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MMCX to MMCX cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle MMCX cable connection on one end and a right angle MMCX cable connection on the other. Our low loss right angle MMCX to right angle MMCX cable assembly has a plug gender on end 1 and a plug on end 2. PE3C1074/SP-100CM can also be known as a low loss right angle MMCX male to right angle MMCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1074/SP-100CM RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle MMCX plug to right angle MMCX plug cable has a maximum VSWR of 1.4:1. MMCX male to MMCX male cable assembly PE3C1074/SP-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with right angle MMCX to right angle MMCX cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss MMCX right angle male to MMCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MMCX to MMCX cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MMCX to MMCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $69.59
25 : $66.11
50 : $62.63
100 : $59.85

PE7AP1002-15

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 6 GHz, Impedance: 50 Ohm, Power Maximum: 1 Watt, Attenuation: 15 dB, Connector Series 1: QMA, Connector Gender 1: Male, Connector Series 2: QMA, Connector Gender 2: Female, Body Material: Brass, Body Plating: Tri-Metal. 15 dB Fixed Attenuator, QMA Male to QMA Female Brass Tri-Metal Body Rated to 1 Watt Up to 6 GHz. PE7AP1002-15 is a fixed 15 dB attenuator from Pasternack. This 15dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This QMA attenuator has a male gender on side 1 and a QMA female connector on side 2. The Pasternack PE7AP1002-15 15 dB attenuator is rated for up to 6 GHz. Our microwave attenuator is rated to 1 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP1002-15 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 15dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $95.29
25 : $90.53
50 : $85.76
100 : $81.95

Relay Specialties

C-106-P100

Custom Connector Corporation

Din-Rail Steel, Zinc Plated; Special

1 : $0.67
5 : $0.58
10 : $0.57
25 : $0.56
50 : $0.55

P1004-17

Littelfuse Inc

SSAC VERSA POTENTIOMETER, 500K

1 : $56.82
5 : $54.98
10 : $53.26
25 : $51.65
50 : $42.61

P1004-95

Littelfuse Inc

SSAC* POTENTIOMETER 100K 10% T

1 : $12.79
5 : $12.38
10 : $11.99
25 : $11.63
50 : $9.59

TE Connectivity

CJP1000J3R9J

TE Connectivity

CJP 1000W 3R9 5% Lead Resistance Value: 3.9 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Through-Hole Resistor | 3.9 Ω Wire Wound 5 % Power Resistor | TE Connectivity
RoHS : Compliant

1 : $248.45

CJP1000J120RJ

TE Connectivity

CJP 1000W 120R 5% Lead Resistance Value: 120 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Through-Hole Resistor | 120 Ω Wire Wound 5 % Power Resistor | TE Connectivity
RoHS : Compliant

1 : $248.45

CJP1000J220RJ

TE Connectivity

CJP 1000W 220R 5% Lead Resistance Value: 220 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Through-Hole Resistor | 220 Ω Wire Wound 5 % Power Resistor | TE Connectivity
RoHS : Compliant

1 : $248.45

CJP1000J150RJ

TE Connectivity

CJP 1000W 150R 5% Lead Resistance Value: 150 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Through-Hole Resistor | 150 Ω Wire Wound 5 % Power Resistor | TE Connectivity
RoHS : Compliant

1 : $248.45

CJP1000J18RJ

TE Connectivity

CJP 1000W 18R 5% Lead Resistance Value: 18 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Through-Hole Resistor | 18 Ω Wire Wound 5 % Power Resistor | TE Connectivity
RoHS : Compliant

1 : $238.99

CJP1000J1K5J

TE Connectivity

CJP 1000W 1K5 5% Lead Resistance Value: 1.5K Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: 1kΩ – 1MΩ Through-Hole Resistor | 1.5K Ω Wire Wound 5 % Power Resistor | TE Connectivity
RoHS : Compliant

1 : $248.45

CJP1000J1K8J

TE Connectivity

CJP 1000W 1K8 5% Lead Resistance Value: 1.8K Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: 1kΩ – 1MΩ Through-Hole Resistor | 1.8K Ω Wire Wound 5 % Power Resistor | TE Connectivity
RoHS : Compliant

1 : $248.45

CJP1000J270RJ

TE Connectivity

CJP 1000W 270R 5% Lead Resistance Value: 270 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Through-Hole Resistor | 270 Ω Wire Wound 5 % Power Resistor | TE Connectivity
RoHS : Compliant

1 : $248.45

CJP1000J470RJ

TE Connectivity

CJP 1000W 470R 5% Lead Resistance Value: 470 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Through-Hole Resistor | 470 Ω Wire Wound 5 % Power Resistor | TE Connectivity
RoHS : Compliant

1 : $248.45

CJP1000J1K2J

TE Connectivity

CJP 1000W 1K2 5% Lead Resistance Value: 1.2K Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: 1kΩ – 1MΩ Through-Hole Resistor | 1.2K Ω Wire Wound 5 % Power Resistor | TE Connectivity
RoHS : Compliant

1 : $248.45

CJP1000J4R7J

TE Connectivity

CJP 1000W 4R7 5% Lead Resistance Value: 4.7 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Through-Hole Resistor | 4.7 Ω Wire Wound 5 % Power Resistor | TE Connectivity
RoHS : Compliant

1 : $248.45

CJP1000J1K0J

TE Connectivity

CJP 1000W 1K0 5% Lead Resistance Value: 1K Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: 1kΩ – 1MΩ Through-Hole Resistor | 1K Ω Wire Wound 5 % Power Resistor | TE Connectivity
RoHS : Compliant

1 : $248.45

CJP1000J47RJ

TE Connectivity

CJP 1000W 47R 5% Lead Resistance Value: 47 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Through-Hole Resistor | 47 Ω Wire Wound 5 % Power Resistor | TE Connectivity
RoHS : Compliant

1 : $238.99

CJP1000J15RJ

TE Connectivity

CJP 1000W 15R 5% Lead Resistance Value: 15 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Through-Hole Resistor | 15 Ω Wire Wound 5 % Power Resistor | TE Connectivity
RoHS : Compliant

1 : $238.99

CJP1000J180RJ

TE Connectivity

CJP 1000W 180R 5% Lead Resistance Value: 180 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Through-Hole Resistor | 180 Ω Wire Wound 5 % Power Resistor | TE Connectivity
RoHS : Compliant

1 : $248.45

Teledyne HiRel

CY37064P100-125AXC

Teledyne HiRel

PLD, 64 MACROCELL, ELECTRICALLY ALTERABLE, 150 MHZ TOGGLE SPEED

Venkel Ltd.

UPTF0603-16W-P-1002CT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�5PPM;10K;�0.25%
RoHS : Compliant

UPTF0603-16W-P-1002DT

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�5PPM;10K;�0.5%
RoHS : Compliant

UPTF2512-2W-P-1001CT

VENKEL LTD

Ultra Precision Thin Film CR;2512;1/2W;�5PPM;1K;�0.25%
RoHS : Compliant

UPTF0603-16W-P-1000UT

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�5PPM;100R;�0.01%
RoHS : Compliant

UPTF0805-10W-P-1000CT

VENKEL LTD

Ultra Precision Thin Film CR;0805;1/10W;�5PPM;100R;�0.25%
RoHS : Compliant

UPTF0805-10W-P-1001CT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0805;1/10W;�5PPM;1K;�0.25%
RoHS : Compliant

UPTF2010-2W-P-1002DT

VENKEL LTD

Ultra Precision Thin Film CR;2010;1/2W;�5PPM;10K;�0.5%
RoHS : Compliant

MELFC0204-ZP-1001BT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�5PPM;1K;�0.1%
RoHS : Compliant

MELFC0207-XP-1003CT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�5PPM;100K;�0.25%
RoHS : Compliant

HPTF0805-RP-1000UT

VENKEL LTD

High Power Thin Film CR;0805;1/8W;�5PPM;100R;�0.01%
RoHS : Compliant

HPTF1206-TP-1001BT

VENKEL LTD

High Power Thin Film CR;1206;1/4W;�5PPM;1K;�0.1%
RoHS : Compliant

HPTF1206-TP-1002UT

VENKEL LTD

High Power Thin Film CR;1206;1/4W;�5PPM;10K;�0.01%
RoHS : Compliant

MELFC0204-TP-1002BT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�5PPM;10K;�0.1%
RoHS : Compliant

MELFC0207-VP-1003BT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�5PPM;100K;�0.1%
RoHS : Compliant

UPTF0402-16W-P-1000AT

VENKEL LTD

Ultra Precision Thin Film CR;0402;1/16W;�5PPM;100R;�0.05%
RoHS : Compliant

Waytek, Inc.

AL-MP-1000-9-C-5M

Advanced Cable Ties Inc

ACT AL-MP-1000-9-C-5M cable tie mounting base is a natural nylon mount designed to anchor cable ties to panels and flat surfaces. It features a square base, four-way tie entry, and a screw-mount style for organized wire routing and harness support in general-purpose installations.

50 : $0.2754
200 : $0.2552
500 : $0.2313
1,000 : $0.2142
5,000 : $0.2038

26,168

AL-MP-1000-0-C-5M

Advanced Cable Ties Inc

ACT AL-MP-1000-0-C-5M cable tie mounting base is a black 1" mount designed to anchor cable ties to panels and flat surfaces. It features a square base, four-way tie entry, and rubber adhesive backing for organized wire routing and harness support in general-purpose installations.

100 : $0.24
200 : $0.2218
500 : $0.2016
1,000 : $0.1865
5,000 : $0.1777

18,000

99502-P1000

FTZ Industries

1-1/2" Battery Terminal Bolt 5/16"-18 Zinc Plated

10 : $0.5759
2 : $0.5446
5 : $0.5258
10 : $0.5039
20 : $0.4852

Win Source Electronics

RK73H1ETTP1001F

KOA Speer Electronics Inc

RES 1K OHM 1% 1/10W 0402
RoHS : Compliant

157,895 : $0.0019
119,050 : $0.0021
90,910 : $0.0022
65,220 : $0.0023
43,480 : $0.0023
17,860 : $0.0028

990,000

20SVP100M

Panasonic Electronic Components

CAP ALUM POLY 100UF 20% 20V SMD
RoHS : Compliant

440 : $0.6844
330 : $0.7633
255 : $0.7896
185 : $0.816
120 : $0.8423
50 : $1.0265

100,000

SMP100LC-65

STMicroelectronics

TRISIL 100A 65V BIDIRECT SMB
RoHS : Compliant

540 : $0.5591
430 : $0.5819
335 : $0.6046
235 : $0.65
150 : $0.6728
70 : $0.7182

39,970

RP100K281B5-TR

Nisshinbo Micro Devices

IC REG LIN 2.85V 200MA DFN1612-4
RoHS : Compliant

700 : $0.5544
565 : $0.5775
435 : $0.6007
300 : $0.6468
195 : $0.6699
95 : $0.716

35,240

TMP100NA/3K

Texas Instruments

Temp Sensor Digital Serial (2-Wire, I2C, SMBus) 6-Pin SOT-23 T/R / SENSOR TEMP I2C/SMBUS SOT23-6
RoHS : Compliant

390 : $0.7753
310 : $0.8068
240 : $0.8384
170 : $0.9014
110 : $0.9329
55 : $0.9959

33,430

MCP100T-315I/TT

Microchip Technology Inc

Processor Supervisor 3.075V 1 Active Low/Push-Pull Automotive 3-Pin SOT-23 T/R / IC SUPERVISOR ACTIVE LOW SOT23-3
RoHS : Compliant

620 : $0.5433
465 : $0.606
360 : $0.627
260 : $0.6478
170 : $0.6688
70 : $0.815

10,600

DMP1009UFDFQ-7

Diodes Incorporated

MOSFET P-CH 12V 11A 6UDFN / P-Channel 12 V 11A (Ta) 2W (Ta) Surface Mount U-DFN2020-6 (Type F)
RoHS : Compliant

44 : $6.8422
33 : $7.6316
26 : $7.8948
19 : $8.1579
12 : $8.4211
5 : $10.2632

8,696

MCP100T-300I/TT

Microchip Technology Inc

Processor Supervisor 2.925V 1 Active Low/Push-Pull Automotive 3-Pin SOT-23 T/R / IC SUPERVISOR ACTIVE LOW SOT23-3
RoHS : Compliant

505 : $0.5955
380 : $0.6642
295 : $0.6871
215 : $0.71
140 : $0.7329
60 : $0.8932

4,310

A3P1000-FGG484I

Microsemi Corporation (now Microchip)

FPGA ProASIC®3 Family 1M Gates 231MHz 130nm Technology 1.5V 484-Pin FBGA Tray | IC FPGA 300 I/O 484FBGA
RoHS : Compliant

4 : $111.3412
3 : $124.1883
2 : $128.4706
1 : $132.7529

3,076

EFM32GG380F1024G-E-QFP100

Silicon Laboratories Inc

IC MCU 32BIT 1MB FLASH 100LQFP / ARM® Cortex®-M3 series Microcontroller IC 32-Bit Single-Core 48MHz 1MB (1M x 8) FLASH 100-LQFP (14x14)
RoHS : Compliant

61 : $5.5385
46 : $6.1776
36 : $6.3906
26 : $6.6036
17 : $6.8167
7 : $8.3078

1,800

A3P1000-1FGG144M

Microsemi Corporation (now Microchip)

Military ProASIC3/EL Low-Power Flash FPGAs | IC FPGA 97 I/O 144FBGA
RoHS : Compliant

3 : $141.2538
2 : $157.5523
1 : $162.9851

1,660

A3P1000-FGG256

Microchip Technology Inc

IC FPGA 177 I/O 256FBGA
RoHS : Compliant

3 : $120.2256
2 : $125.1128
1 : $130.0

1,500