 |
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
|
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
HS2260D-R4 Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
 TME | HS25 18R F | Arcol | Resistor: wire-wound; 18Ω; with heatsink; screw; 25W; ±1%; 550V |
| 706 | |
| 57HS22-01-2-04S | Grayhill Inc | Switch: rotary; Pos: 4; Leads: for soldering; Rcont max: 50mΩ RoHS : Compliant |
| 84 | ||
| 57HS22-01-2-08S | Grayhill Inc | Switch: rotary RoHS : Compliant |
| 10 | ||
| HS200 16R F | Arcol | Resistor: wire-wound; 16Ω; screw; 200W; ±1%; 1.9kV; 100ppm/°C |
| 5 | ||
| 4HS26 | Honeywell Sensing and Control | Microswitch SNAP ACTION; SPDT; ON-(ON); HS; Leads: cables; 6.12N |
| 2 | ||
LQG15HS27NH02D.jpg) | Murata Manufacturing Co Ltd | Inductor: air coil; SMD; 0402; 27nH; 350mA; R: 0.46Ω; ±3%; LQG; 180mm RoHS : Compliant |
| 0 | ||
| LQG15HS2N7B02J | Murata Manufacturing Co Ltd | Inductor: air coil; SMD; 0402; 2.7nH; 800mA; R: 0.12Ω; LQG; 330mm RoHS : Compliant |
| 0 | ||
| R88M-GP20030H-S2 | OMRON Corporation | Motor: servo motor; with incremental encoder; 200W; 200VAC; G |
| 0 | ||
| NFG0QHB372HS2D | Murata Manufacturing Co Ltd | Filter: anti-interference; 9Ω; SMD; 12.5VDC; 100mA; 025020; 100MHz RoHS : Compliant |
| 0 | ||
| R88M-G10030H-S2 | OMRON Corporation | Motor: servo motor; with incremental encoder; 100W; 200VAC; R88M |
| 0 | ||
| HF115F-H/012-1HS2A | Xiamen Hongfa Electroacoustic Co.,Ltd. | Relay: electromagnetic; Ucoil: 12VDC; SPST-NO; 10A; 10A/250VAC; THT RoHS : Compliant |
| 0 | ||
| HF32FA/005-HS2 | Xiamen Hongfa Electroacoustic Co.,Ltd. | Relay: electromagnetic; Ucoil: 5VDC; SPST-NO; 5A; 5A/250VAC; THT RoHS : Compliant |
| 0 | ||
| HS200 5K F | Arcol | Resistor: wire-wound; 5kΩ; screw; 200W; ±1%; 1.9kV; 100ppm/°C |
| 0 | ||
| HS200 8R F | Arcol | Resistor: wire-wound; 8Ω; screw; 200W; ±1%; 1.9kV; 89.7x72.5x41.8mm |
| 0 | ||
| HS25 100R F | Arcol | Resistor: wire-wound; 100Ω; screw; 25W; ±1%; 550V; 27.3x28x14.6mm |
| 0 | ||
 Ameya Holding Limited | TMUXHS221LVNKGT | Texas Instruments | RoHS : Compliant | 145,203 | ||
| PESD5V0HS2-SFYL | Nexperia | 108,000 | ||||
| PESD3V3HS2-SFYL | Nexperia | RoHS : Compliant | 99,000 | |||
| NFG0QHB242HS2D | Murata Manufacturing Co Ltd | RoHS : Compliant | 15,000 | |||
| FBMJ1608HS220NT8 | TAIYO YUDEN | RoHS : Compliant | 4,000 | |||
| FBMJ1608HS280NT8 | TAIYO YUDEN | RoHS : Compliant | 4,000 | |||
 ComSIT USA | FHS2G221MKSA | DAEWOO Electronic Components | AVAILABLE EU | 62 | ||
| CHS2411QDG2120094241 | UMS | AVAILABLE EU | 12,089 | |||
| LQG15HS27NJ02D | Murata Manufacturing Co Ltd | AVAILABLE EU RoHS : Compliant | 2,748 | |||
| LQG15HS27NJ02D | Murata Manufacturing Co Ltd | AVAILABLE EU RoHS : Compliant | 6,431 | |||
 Interstate Connecting Components | HS2L7F26C | Switchcraft Conxall | CONN,PUSH-PULL,CAB MT RECEP FEM, 7POS |
| 6 | |
| HS202DR | Crydom Inc | HEAT SINK, DIN RAIL MOUNT, 2.0 C/W, 1 OR 2 SSRS RoHS : Compliant |
| 5 | ||
| JN1041HS25-06 | Glenair Inc | CIRC. EMI NON-ENV. BACKSHELL | 0 | |||
| HS2800810000G | Amphenol Anytek | HS-5.0- 47P GREY SOLDER PINS | 0 | |||
| 319HS201XB17 | Glenair Inc | Glenair RoHS : Compliant | 0 | |||
| 447HS233NF2511-6P | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| 447HS250M0903 | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| 319HS201XB09 | Glenair Inc | Glenair RoHS : Compliant | 0 | |||
| HS2050800000G | Amphenol Anytek | HS-7.62- 45P GREY SOLDER PIN | 0 | |||
| 712HS277NF2532-31 | Glenair Inc | GROUND RING SYSTEM STRAIGHT BS AND TERMINI RoHS : Not Compliant | 0 | |||
| 327HS283XM0913 | Glenair Inc | 0 | ||||
| 712HS277NF1724-31 | Glenair Inc | GROUND RING SYSTEM STRAIGHT BS AND TERMINI RoHS : Not Compliant | 0 | |||
| 712HS277NF1110-31 | Glenair Inc | GROUND RING SYSTEM STRAIGHT BS AND TERMINI RoHS : Not Compliant | 0 | |||
| 712HS277NF1516-31 | Glenair Inc | GROUND RING SYSTEM STRAIGHT BS AND TERMINI RoHS : Not Compliant | 0 | |||
| 447HS233NF1711-6P | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
 NexGen Digital | LQG15HS27NJ02D | Murata Manufacturing Co Ltd | RoHS : Compliant | 875 | ||
 Rutronik | LQG15HS27NJ02D | Murata Manufacturing Co Ltd | LQG15HS 27nH 300mA 5% MLT RoHS : Compliant |
| 1,670,000 | |
| LQG15HS2N0S02D | Murata Manufacturing Co Ltd | LQG15HS 2nH 300mA 0,3nH MLT RoHS : Compliant |
| 370,000 | ||
| LQG15HS2N7S02D | Murata Manufacturing Co Ltd | LQG15HS 0,0027uH 0,3A 0,3nH MLT RoHS : Compliant |
| 120,000 | ||
| V0603MHS22NR | Littelfuse Inc | VC 0603 DC=9V CL=30V RoHS : Compliant |
| 44,000 | ||
| LQG15HS2N4S02D | Murata Manufacturing Co Ltd | LQG15HS 0,0024uH 0,3A 0,3nH MLT RoHS : Compliant |
| 10,000 | ||
 Chip 1 Exchange | LQG15HS22NJ02D | INSTOCK | 36,524 | |||
| V0603MHS22NH | Littelfuse Inc | INSTOCK RoHS : Compliant | 8,313 | |||
| FHS200V224J420 | INSTOCK | 8,000 | ||||
| FBMJ2125HS250NT | TAIYO YUDEN | INSTOCK RoHS : Compliant | 6,623 | |||
| FBMJ1608HS280NT | INSTOCK | 3,876 | ||||
| FHS 200V 244J 420 | INSTOCK | 3,550 | ||||
| FBMJ1608HS280NTR | TAIYO YUDEN | INSTOCK RoHS : Compliant | 3,469 | |||
| RHS25561F | Dubilier | INSTOCK | 3,000 | |||
| 1008HS-221TJBC | Coilcraft Inc | INSTOCK RoHS : Not Compliant | 2,083 | |||
| 1008HS-221TJBC | Coilcraft Inc | INSTOCK RoHS : Not Compliant | 1,950 | |||
| 1008HS-221TJBC | INSTOCK | 1,950 | ||||
| HS25 560R J | Arcol | INSTOCK | 1,495 | |||
| HS25 10R J | Arcol | INSTOCK | 1,453 | |||
| HS25 15K J | Arcol | INSTOCK | 1,319 | |||
| HS206F | INSTOCK | 39 | ||||
 Avnet Asia | HS2J | Taiwan Semiconductor | Diode Fast Switching Rectifier 600V 2A 2-Pin DO-214AA T/R (Alt: HS2J) RoHS : Compliant |
| 27,000 | |
| KR DDLM32.23-GQHS-25-D1G2-100-R18 | ams OSRAM Group | OOSKR DDLM32.23-GQHS-25-D1G2-100-R18 Q65 (Alt: KR DDLM32.23-GQHS-25-D1G2-100-R18) RoHS : Compliant | 0 | |||
| HS2M-05 | Taiwan Semiconductor | (Alt: HS2M-05) RoHS : Compliant | 0 | |||
| CUHS20F30,H3F(B | Toshiba America Electronic Components | Small Signal Schottky Diode, Single, 30 V, 2 A, 470 mV, 10 A, 150 ?C, SOD-323HE, 2 Pins (Alt: CUHS20F30,H3F(B) RoHS : Compliant | 0 | |||
| LQG15HS2N7S02D | Murata Manufacturing Co Ltd | (Alt: LQG15HS2N7S02D) RoHS : Compliant | 0 | |||
| LQG15HS22NJ02D | Murata Manufacturing Co Ltd | (Alt: LQG15HS22NJ02D) RoHS : Compliant |
| 0 | ||
| HS2M | Taiwan Semiconductor | (Alt: HS2M) RoHS : Compliant | 0 | |||
| LQG15HS2N2C02D | Murata Manufacturing Co Ltd | (Alt: LQG15HS2N2C02D) RoHS : Compliant | 0 | |||
| MMD-06AHS2R2M-X2-IS | Pulse Electronics Corporation | PULMMD-06AHS2R2M-X2-IS CHILISIN INDUCTOR (Alt: MMD-06AHS2R2M-X2-IS) RoHS : Compliant | 0 | |||
| LQG15HS22NG02D | Murata Manufacturing Co Ltd | (Alt: LQG15HS22NG02D) RoHS : Compliant | 0 | |||
| HS2M-T | Taiwan Semiconductor | 75ns, 2A, 1000V, High Efficient Recovery Rectifier (Alt: HS2M-T) RoHS : Compliant | 0 | |||
| FBMJ1608HS220NTW | TAIYO YUDEN | (Alt: FBMJ1608HS220NTW) RoHS : Compliant | 0 | |||
| LQG15HS2N0B02D | Murata Manufacturing Co Ltd | (Alt: LQG15HS2N0B02D) RoHS : Compliant |
| 0 | ||
| NFG0QHB372HS2D | Murata Manufacturing Co Ltd | Choke, Common Mode, 9 ohm, 100 mA, 0202 [0605 Metric] (Alt: NFG0QHB372HS2D) RoHS : Compliant | 0 | |||
| LQG15HS2N7B02D | Murata Manufacturing Co Ltd | (Alt: LQG15HS2N7B02D) RoHS : Compliant |
| 0 | ||
 DB Roberts | PHS256X9/16-PH-SS-NYPA | PAN HEAD MACHINE SC | Pan Head Machine Screw |
| 35,590 | |
| PHS256X3/8-PH-STL-ZI | PAN HEAD MACHINE SC | Pan Head Machine Screw |
| 6,649 | ||
| PHS256X3/4-PH-STL-ZI | PAN HEAD MACHINE SC | Pan Head Machine Screw |
| 6,144 | ||
| FHS256X5/16-PH-SS | FLAT HEAD MACHINE S | Flat Head Machine Screw |
| 5,314 | ||
| PHS256X1/2-PH-SS-NYPA | PAN HEAD MACHINE SC | Pan Head Machine Screw |
| 2,451 | ||
| PHS256X3/16-PH-SS-BO | PAN HEAD MACHINE SC | Pan Head Machine Screw |
| 1,982 | ||
| SHS256X1/4-SS-NYTP | SOCKET HEAD SET SCR | Socket Head Set Screw |
| 281 | ||
| SHS256X1/2-SS-CP | SOCKET HEAD SET SCR | Socket Head Set Screw |
| 270 | ||
| FHS256X3/8-PH-SS | FLAT HEAD MACHINE S | Flat Head Machine Screw |
| 187 | ||
| PHS256X1/2-PH-STL-ZI | PAN HEAD MACHINE SC | Pan Head Machine Screw |
| 40 | ||
| FHS-207-16 | PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly | 0 | |||
| FHS-207-5 | PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly | 0 | |||
| FHS-215-16 | PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly | 0 | |||
| FHS-207-14 | PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly | 0 | |||
| FHS-223-24 | PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly | 0 | |||
 Flip Electronics | NL3HS2222MUTBG | onsemi | Stock RoHS : Compliant | 18,000 | ||
| S35HS256TFANHI210 | Infineon Technologies AG | Stock | 16,900 | |||
| S35HS256TFANHI213 | Infineon Technologies AG | Stock | 15,000 | |||
 Maritex | PHS-2Y | JINDA | Crimp terminal housing; pitch 2.00mm; 2-contacts; applicable wire AWG#22-30; 125V/2A |
| 7,055 | |
| PHS-2AW | JINDA | Header for PCB; pitch 2.00mm; 2-contacts; THT; male; side entry; 125V/2A |
| 3,660 | ||
| PHS-2A | JINDA | Header for PCB; pitch 2.00mm; 2-contacts; THT; male; top entry; 125V/2A |
| 3,055 | ||
| 9C20000015 ROHS 20MHZ 32PF 30PPM ROHS | TXC Corporation | Quartz crystal; 20.00MHz; HC49SMD; 30ppm; 30pF |
| 995 | ||
 Pasternack Enterprises US | PE3W01361/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. TNC Male Right Angle to TNC Male Low Loss Cable 24 Inch Length Using LMR-240 Coax with HeatShrink., Radio frequency assembly TNC male right angle to TNC male low loss cable 24 inch length using LMR-240 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to TNC male low loss cable 24 inch length using LMR-240 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle TNC cable connection on one end and a TNC cable connection on the other. Our low loss right angle TNC to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3W01361/HS-24 can also be known as a low loss right angle TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01361/HS-24 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our right angle TNC male to TNC male cable has a maximum VSWR of 1.4:1. TNC plug to TNC plug cable assembly PE3W01361/HS-24 is built with LMR-240 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01361/HS-24 can also be used in the other direction and will be a TNC male to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 3,111 | |
| PE3C1934/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. BNC Male to N Male Low Loss Cable 24 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly BNC male to N male low loss cable 24 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to N male low loss cable 24 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and N type cable connection on the other. Our low loss BNC to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C1934/HS-24 can also be known as a low loss BNC plug to type N plug cable assembly and will be shipped same-day as it is purchased. BNC plug to type N plug cable assembly PE3C1934/HS-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1934/HS-24 can also be used in the other direction and will be N type male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to N type cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to N male low loss cable 24 inch length using LMR-195 coax with heatshrink. |
| 2,206 | ||
| PE3994/HS-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. BNC Female Bulkhead to BNC Male Right Angle Cable 200 cm Length Using RG188 Coax with HeatShrink., Radio frequency assembly BNC female bulkhead to BNC male right angle cable 200 cm length using RG188 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC female bulkhead to BNC male right angle cable 200 cm length using RG188 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC bulkhead cable connection on one end and right angle BNC cable connection on the other. Our BNC to right angle BNC cable assemblies have a female gender on end 1 and male on end 2. This BNC to BNC cable is a female to male coax assembly, PE3994/HS-200CM, can also be known as a BNC jack to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. BNC jack to BNC plug cable assembly PE3994/HS-200CM is built with RG188 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 2 GHz maximum frequency BNC female bulkhead to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3994/HS-200CM can also be used in the other direction and will be right angle BNC male to BNC female bulkhead cable assembly if the opposite connectivity is required. BNC jack bulkhead to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC female bulkhead to BNC male right angle cable 200 cm length using RG188 coax with heatshrink. |
| 209 | ||
| PE34594/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Female Bulkhead to MCX Plug Right Angle Cable 24 Inch Length Using RG178 Coax with HeatShrink., Radio frequency assembly SMA female bulkhead to MCX plug right angle cable 24 inch length using RG178 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to MCX plug right angle cable 24 inch length using RG178 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and right angle MCX cable connection on the other. Our SMA to right angle MCX cable assemblies have a female gender on end 1 and plug on end 2. PE34594/HS-24 can also be known as a SMA jack to right angle MCX male cable assembly and will be shipped same-day as it is purchased. SMA jack to MCX male cable assembly PE34594/HS-24 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA female bulkhead to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34594/HS-24 can also be used in the other direction and will be right angle MCX plug to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to MCX plug right angle cable 24 inch length using RG178 coax with heatshrink. |
| 2 | ||
| PE3205LF/HS2 | Pasternack Enterprises | 0 | ||||
| PE34316/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. TNC Male to TNC Male Cable 24 Inch Length Using RG316-DS Coax with HeatShrink., Radio frequency assembly TNC male to TNC male cable 24 inch length using RG316-DS coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to TNC male cable 24 inch length using RG316-DS coax with heatshrink, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. PE34316/HS-24 can also be known as a TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE34316/HS-24 is built with RG316-DS which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 2 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male cable 24 inch length using RG316-DS coax with heatshrink. |
| 0 | ||
| PE35568/HS2-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SMB Jack Cable 24 Inch Length Using RG316-DS Coax with Double HeatShrink., Radio frequency assembly SMA male to SMB jack cable 24 inch length using RG316-DS coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMB jack cable 24 inch length using RG316-DS coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMB cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMB cable connection on the other. Our SMA to SMB cable assembly has male gender on end 1 and jack on end 2. PE35568/HS2-24 can also be known as a SMA plug to SMB female cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA plug to SMB female cable assembly PE35568/HS2-24 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMB cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE35568/HS2-24 RF cable are available on our downloadable PDF datasheet.PE35568/HS2-24 can also be used in the other direction and will be SMB jack to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE36613/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to TNC Female Cable 24 Inch Length Using RG316 Coax with HeatShrink., Radio frequency assembly SMA male to TNC female cable 24 inch length using RG316 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to TNC female cable 24 inch length using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and TNC cable connection on the other. Our SMA to TNC cable assembly has male gender on end 1 and female on end 2. PE36613/HS-24 can also be known as a SMA plug to TNC jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA plug to TNC jack cable assembly PE36613/HS-24 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE36613/HS-24 RF cable are available on our downloadable PDF datasheet.PE36613/HS-24 can also be used in the other direction and will be TNC female to SMA male cable assembly if the opposite connectivity is required. SMA plug to TNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE39423/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SMA Male Cable 24 Inch Length Using PE-SR402FL Coax with HeatShrink., Radio frequency assembly SMA male to SMA male cable 24 inch length using PE-SR402FL coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable 24 inch length using PE-SR402FL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE39423/HS-24 can also be known as a SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE39423/HS-24 is built with PE-SR402FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a brass body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10163/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SSMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMC, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SSMA Male to SSMC Plug Low Loss Cable 200 CM Length Using LMR-100A-UF Coax with HeatShrink., Radio frequency assembly SSMA male to SSMC plug low loss cable 200 cm length using LMR-100A-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SSMA male to SSMC plug low loss cable 200 cm length using LMR-100A-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SSMA to SSMC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SSMA cable connection on one end and a SSMC cable connection on the other. Our low loss SSMA to SSMC cable assembly has a male gender on end 1 and a plug on end 2. PE3C10163/HS-200CM can also be known as a low loss SSMA plug to SSMC male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10163/HS-200CM RF cable has a TPE jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SSMA male to SSMC plug cable has a maximum VSWR of 1.4:1. SSMA plug to SSMC male cable assembly PE3C10163/HS-200CM is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible SSMA cable assembly is manufactured with SSMA to SSMC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10163/HS-200CM can also be used in the other direction and will be a SSMC plug to SSMA male cable assembly if the opposite connectivity is required. Low loss SSMA plug to SSMC male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SSMA to SSMC cable assembly for quick shipment worldwide. Variations of SSMA and SSMC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SSMA to SSMC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C1909/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male Right Angle to SMA Male Right Angle Low Loss Cable 24 Inch Length Using PE-P195 Coax with HeatShrink., Radio frequency assembly SMA male right angle to SMA male right angle low loss cable 24 inch length using PE-P195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to SMA male right angle low loss cable 24 inch length using PE-P195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a right angle SMA cable connection on the other. Our low loss right angle SMA to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C1909/HS-24 can also be known as a low loss right angle SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1909/HS-24 RF cable has a FEP jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our right angle SMA male to right angle SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3C1909/HS-24 is built with PE-P195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA right angle plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3C2478/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. BNC Male to SMA Male Low Loss Cable 200 cm Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly BNC male to SMA male low loss cable 200 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to SMA male low loss cable 200 cm length using LMR-100 coax with heatshrink, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and SMA cable connection on the other. Our low loss BNC to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C2478/HS-200CM can also be known as a low loss BNC plug to SMA plug cable assembly and will be shipped same-day as it is purchased. BNC plug to SMA plug cable assembly PE3C2478/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this BNC male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2478/HS-200CM can also be used in the other direction and will be SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to SMA male low loss cable 200 cm length using LMR-100 coax with heatshrink. |
| 0 | ||
| PE3C7620/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. HN Male to UHF Male Cable 24 Inch Length Using RG58 Coax with HeatShrink., Radio frequency assembly HN male to UHF male cable 24 inch length using RG58 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The HN male to UHF male cable 24 inch length using RG58 coax with heatshrink, HN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HN to UHF cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with HN cable connection on one end and UHF cable connection on the other. Our HN to UHF cable assemblies have a male gender on end 1 and male on end 2. PE3C7620/HS-24 can also be known as a HN plug to UHF plug cable assembly and will be shipped same-day as it is purchased. HN plug to UHF plug cable assembly PE3C7620/HS-24 is built with RG58 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to UHF cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this HN male to UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7620/HS-24 can also be used in the other direction and will be UHF male to HN male cable assembly if the opposite connectivity is required. HN plug to UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HN to UHF cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this HN male to UHF male cable 24 inch length using RG58 coax with heatshrink. |
| 0 | ||
| PE3C8634LF/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SMA Male to SMA Male Low Loss Cable 200 CM Length Using LMR-100A-UF Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to SMA male low loss cable 200 cm length using LMR-100A-UF coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male low loss cable 200 cm length using LMR-100A-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C8634LF/HS-200CM can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C8634LF/HS-200CM RF cable has a TPE jacket of 0.110-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3C8634LF/HS-200CM is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W00029/HS2-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Female Bulkhead to N Female Bulkhead Low Loss Cable 48 Inch Length Using LMR-400 Coax with Double HeatShrink., Radio frequency assembly N female bulkhead to N female bulkhead low loss cable 48 inch length using LMR-400 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female bulkhead to N female bulkhead low loss cable 48 inch length using LMR-400 coax with double heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type bulkhead cable connection on one end and type N bulkhead cable connection on the other. Our low loss N type to type N cable assemblies have a female gender on end 1 and female on end 2. PE3W00029/HS2-48 can also be known as a low loss type N jack to type N jack cable assembly and will be shipped same-day as it is purchased. N type jack to N type jack cable assembly PE3W00029/HS2-48 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency N type female bulkhead to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type jack bulkhead to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to N female bulkhead low loss cable 48 inch length using LMR-400 coax with double heatshrink. |
| 0 | ||
 Sager | BC4LH-S25-L | Panduit Corp | Cable Tie Mounts Clamp Tie Metal Barb 15.5L (394mm) L |
| 400 | |
| B907HS20EG | ABB Group | Wire Ducting & Raceways |
| 0 | ||
| CFPHS2EI-L | Panduit Corp | Electrical Enclosure Accessories Faceplate 2 Port Single Gang Sloped H | 0 | |||
| CHS250B | ABB Group | Thomas & Betts | 0 | |||
| CHS2IG-X | Panduit Corp | Wire Ducting & Raceways Insert 2 Port Sloped Intl Gray | 0 | |||
| HW-06-08-H-S-290-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HW-07-10-H-S-290-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HW-09-09-H-S-290-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HW-10-10-H-S-290-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HW-12-09-H-S-290-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HW-13-11-H-S-290-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HW-16-12-H-S-290-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HS2C8F26A | Switchcraft Conxall | Circular Push Pull Connectors Cable End 8 Pos Female Cable Size A |
| 0 | ||
| HS2P7F26-BP | Switchcraft Conxall | Circular Push Pull Connectors Front Panel Mount PC Contact, 7-26 F RoHS : Compliant |
| 0 | ||
| HS2X3BL6NM | Panduit Corp | Wire Ducting & Raceways |
| 0 | ||
 TE Connectivity | THS2510RJ | TE Connectivity | THS25 10R 5% Resistance Value: 10 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistor: Aluminum Housed & 75 Watt | 10 Ω Wire Wound 5 % Power Resistor | Part Number: THS2510RJ | Internal Number: 2-1879075-4 | TE Connectivity RoHS : Compliant |
| 167 | |
| THS254K7J | TE Connectivity | THS25 4K7 5% Resistance Value: 4.7K Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: 1kΩ – 1MΩ Power Resistor: Aluminum Housed & 75 Watt | 4.7K Ω Wire Wound 5 % Power Resistor | Part Number: THS254K7J | Internal Number: 5-1879075-2 | TE Connectivity RoHS : Compliant |
| 163 | ||
| THS2515RJ | TE Connectivity | THS25 15R 5% Resistance Value: 15 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistor: Aluminum Housed & 75 Watt | 15 Ω Wire Wound 5 % Power Resistor | Part Number: THS2515RJ | Internal Number: 2-1879075-6 | TE Connectivity RoHS : Compliant |
| 155 | ||
| THS25560RJ | TE Connectivity | THS25 560R 5% Resistance Value: 560 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistor: Aluminum Housed & 75 Watt | 560 Ω Wire Wound 5 % Power Resistor | Part Number: THS25560RJ | Internal Number: 4-1879075-6 | TE Connectivity RoHS : Compliant |
| 147 | ||
| THS2582RJ | TE Connectivity | THS25 82R 5% Resistance Value: 82 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistor: Aluminum Housed & 75 Watt | 82 Ω Wire Wound 5 % Power Resistor | Part Number: THS2582RJ | Internal Number: 3-1879075-7 | TE Connectivity RoHS : Compliant |
| 132 | ||
| THS25R50J | TE Connectivity | THS25 R50 5% Resistance Value: .5 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ 0.5 Ω Wire Wound 5 % Power Resistor | Power Resistor: Aluminum Housed & 75 Watt | Part Number: THS25R50J | Internal Number: 1-1879075-0 | TE Connectivity RoHS : Compliant |
| 121 | ||
| THS256K8J | TE Connectivity | THS25 6K8 5% Resistance Value: 6.8K Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: 1kΩ – 1MΩ Power Resistor: Aluminum Housed & 75 Watt | 6.8K Ω Wire Wound 5 % Power Resistor | Part Number: THS256K8J | Internal Number: 5-1879075-4 | TE Connectivity RoHS : Compliant |
| 115 | ||
| THS25R82J | TE Connectivity | THS25 R82 5% Resistance Value: .82 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ 0.82 Ω Wire Wound 5 % Power Resistor | Power Resistor: Aluminum Housed & 75 Watt | Part Number: THS25R82J | Internal Number: 1-1879075-2 | TE Connectivity RoHS : Compliant |
| 114 | ||
| THS2522KJ | TE Connectivity | THS25 22K 5% Resistance Value: 22K Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: 1kΩ – 1MΩ Power Resistor: Aluminum Housed & 75 Watt | 22K Ω Wire Wound 5 % Power Resistor | Part Number: THS2522KJ | Internal Number: 5-1879075-6 | TE Connectivity RoHS : Compliant |
| 92 | ||
| THS2510KJ | TE Connectivity | THS25 10K 5% Resistance Value: 10K Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: 1kΩ – 1MΩ Power Resistor: Aluminum Housed & 75 Watt | 10K Ω Wire Wound 5 % Power Resistor | Part Number: THS2510KJ | Internal Number: 5-1879075-5 | TE Connectivity RoHS : Compliant |
| 87 | ||
| PB6B2HS2M1CAL00S500 | TE Connectivity | PB OFF/ON HC BLK M1 TERM IP68 500MM L Push Button Switch Product Type: General Purpose Push Button Switch Illuminated: Without Operating Function: Momentary Configuration (Pole-Throw): Single Pole - Single Throw Number of Actuators: Single General Purpose Push Button Switch Without Momentary Single Pole - Single Throw | Pushbutton Switch | Part Number: PB6B2HS2M1CAL00S500 | Internal Number: 2329358-1 | TE Connectivity RoHS : Compliant |
| 63 | ||
| THS2547RJ | TE Connectivity | THS25 47R 5% Resistance Value: 47 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistor: Aluminum Housed & 75 Watt | 47 Ω Wire Wound 5 % Power Resistor | Part Number: THS2547RJ | Internal Number: 3-1879075-2 | TE Connectivity RoHS : Compliant |
| 50 | ||
| THS25R05J | TE Connectivity | THS25 R05 5% Resistance Value: .05 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ 0.05 Ω Wire Wound 5 % Power Resistor | Power Resistor: Aluminum Housed & 75 Watt | Part Number: THS25R05J | Internal Number: 1879075-3 | TE Connectivity RoHS : Compliant |
| 40 | ||
| THS25R22J | TE Connectivity | THS25 R22 5% Resistance Value: .22 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ 0.22 Ω Wire Wound 5 % Power Resistor | Power Resistor: Aluminum Housed & 75 Watt | Part Number: THS25R22J | Internal Number: 1879075-6 | TE Connectivity RoHS : Compliant |
| 39 | ||
| THS25680RJ | TE Connectivity | THS25 680R 5% Resistance Value: 680 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistor: Aluminum Housed & 75 Watt | 680 Ω Wire Wound 5 % Power Resistor | Part Number: THS25680RJ | Internal Number: 4-1879075-7 | TE Connectivity RoHS : Compliant |
| 29 | ||
 Vyrian | STHS2375AM6F | STMicroelectronics | Power Supply Support Circuit, Adjustable, 1 Channel, PDSO8 RoHS : Compliant | 11,529 | ||
| THS2550RJ | TE Connectivity | Fixed Resistor, Wire Wound, 25W, 50ohm, 550V, 5% +/-Tol, 50ppm/Cel, Chassis Mount RoHS : Compliant | 10,972 | |||
| LTC2864HS-2#PBF | Analog Devices Inc | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO14 RoHS : Compliant | 9,617 | |||
| PHS230A6 | Littelfuse Inc | Relays/Accessories | 8,456 | |||
| THS25R50J | TE Connectivity | Fixed Resistor, Wire Wound, 25W, 0.5ohm, 550V, 5% +/-Tol, 50ppm/Cel, Chassis Mount RoHS : Compliant | 7,105 | |||
| LTC2864HS-2#TRPBF | Analog Devices Inc | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO14 RoHS : Compliant | 6,429 | |||
| FCR-HS2MMC/SD | Kingston Technology Company | 5,267 | ||||
| MT41J1G4THS-25ES:D | Micron Technology Inc | 5,100 | ||||
| PTMUXHS221NKGR | Texas Instruments | Differential Multiplexer, 1 Func, 2 Channel, PQCC10 RoHS : Not Compliant | 3,716 | |||
| HS271DR-HD6025 | Crydom Inc | Trigger Output SSR, 1-Channel, 4000V Isolation RoHS : Compliant | 894 | |||
| HS200R82F | Arcol Uk | Fixed Resistor, Wire Wound, 200W, 0.82ohm, 1900V, 1% +/-Tol, 100ppm/Cel, Chassis Mount | 817 | |||
| BKP1005HS221-T8 | TAIYO YUDEN | Ferrite Chip, 1 Function(s), 0.8A, 2 Pin(s) RoHS : Compliant | 711 | |||
| HS2501R5F | Arcol Uk | Fixed Resistor, Wire Wound, 250W, 1.5ohm, 2200V, 1% +/-Tol, 100ppm/Cel, Chassis Mount | 560 | |||
| HS202DR-HD6050 | Crydom Inc | Trigger Output SSR, 1-Channel, 4000V Isolation RoHS : Compliant | 415 | |||
| HS202DR | Crydom Inc | Heat Sink RoHS : Compliant | 394 | |||
 Waytek, Inc. | A171AHS24VDC.96R | CIT Relay & Switch | 280 Relay, 30A, SPST, 24VDC |
| 841 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Spanish ▼ 
English
Chinese
German
Japanese
Russian
Korean
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand