F-11P3-R Price, Reseller, Stock

Key Specifications. Antenna Type Stamped Metal Polarization Linear Minimum Frequency 2.4 GHz Maximum Frequency 5.825 GHz Impedance 50 Ohm Maximum Input VSWR 2:1. 2400-2500/ 4900-5825 MHz, 3.5/5 dBi, Stamped Metal AP/Router Embedded Antenna., Linear polarized antenna PESMA1001 from Pasternack is part of our extensive in-stock omni directional antennas that ship the same day from our ISO 9001:2015 certified facility. The stamped metal antenna has a maximum frequency of 5825 MHz and a minimum frequency of 2400 MHz. This stamped metal antenna has a maximum input VSWR of 2:1. This stamped metal antenna has an overall length of 2.16 inches and a width of 0.7 inches. Pasternack’s PESMA1001 is a dual band antenna operating from 2400 to 2500 MHz with 3.5 dBi gain and 4900 to 5825 MHz with 5 dBi gain. Our high-quality omni directional antenna has an impedance of 50 Ohms. Pasternack's experts are on hand to assist you with any inquiries. Order this PESMA1001 stamped metal antenna 7 days a week, 24 hours a day, using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping. Our knowledgeable sales team and ability in the global availability market allow us to lead the industry in supplying RF products like these omni directional antennas.

1 : $3.79
25 : $3.6
50 : $3.41
100 : $3.26

7,000

TC-240-TM-RA-D

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: TNC, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Right Angle, Attachment Method: Crimp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: LMR-240, Interface Type 2: PE-C240, Interface Type 3: RG8X. TNC Male Right Angle For LMR-240, PE-C240, RG8X. TC-240-TM-RA-D TNC male right angle coaxial connector has an interface type of TNC male LMR-240, PE-C240, and RG8X and a 50 Ohm impedance. Pasternack's TNC male connector uses crimp/solder as an attachment method. Our male TNC right angle coaxial connector provides a maximum frequency of 6 GHz. The Pasternack right angle TNC male coaxial connector has a PTFE dielectric type and a VSWR of 1.35:1. Pasternack's TNC coaxial connector has a brass body with tri-metal plating. Our TC-240-TM-RA-D TNC right angle connector uses a gold-plated brass contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector is made from brass material and has a contact life of 500 cycles or more. Our high-quality TC-240-TM-RA-D features an 80 µin body plating specification. The Pasternack TC-240-TM-RA-D TNC connector operates at a temperature range of -40 to 125 deg C. This threaded male coaxial RF connector has a maximum insertion loss of 0.25 dB. The Pasternack TNC male connector has a maximum operating voltage of 500 Vrms and a dielectric withstanding voltage of 1,000 Vrms. This Pasternack right angle male TNC connector will ship the same business day as purchased. Our TNC right angle male connector is part of over 40,000 RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements, *LMR™ is a Trademark of Times Microwave.

1 : $18.08
25 : $17.36
50 : $16.81
100 : $16.45

2,228

PEPRMARM

Pasternack Enterprises

Key Specifications.Material: Galvanized SteelPlating: Powder Coat. Non-Penetrating Antenna Peak Roof Mount 34-inch Pole Only. The Pasternack’s PEPRMARM non-penetrating antenna peak roof mount pole is available for antenna installations and it is easy to transport. This 34-inch non-penetrating antenna mount pole has a strong and rugged design made up of galvanized steel. Our peak roof mount is designed for telecom installers, DIY installers, and satellite dish installers, This peak roof mount pole has a powder coating to withstand harsh climates and corrosion. The non-penetrating antenna peak roof mount has operating windspeeds up to 50 Km/h or 31 MPH and survives at windspeeds up to 100 Km/h or 62 MPH. Our non-penetrating roof mount is used for peak roofs and is available with easy assembly instructions, The non-penetrating peak roof mount is suitable for wireless internet providers, crypto enterprises, and commercial building owners that can be mounted on roofs. Ballast material (i.e, cinder blocks, concrete blocks, etc.) are used in these non-drill roof mounts to anchor them to the roof. This non-penetrating antenna peak roof mount pole doesn’t need screws or anchors, which minimizes damage to the roofs, Pasternack has one of the largest in-stock selection of non-penetrating antenna peak roof mount pole for international and domestic orders. Make your online purchase right now to take advantage of our same-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect 34-inch non-penetrating antenna roof mount pole for your requirements, Note: Ballast data should be determined by a local professional engineer. Adequate ballast material must be determined and provided by others.

1 : $121.99
25 : $115.89
50 : $109.79
100 : $104.91

103

PEMSY00002

Pasternack Enterprises

Key Specifications, Impedance: 78 Ohm, Maximum Frequency: 500 MHz, Minimum Frequency: DC, Body Material: Brass, Connector Series: TRB 3-Slot, Connector Gender: Plug, Temperature, Max Operating: 200 deg C, Temperature, Min Operating: -55 deg C. LF 3-SLOT TRB PLUG 78 OHM TERMINATOR W 6" CHAIN. Pasternack’s PEMSY00002 MIL-STD-1553 Bus termination has a TRB 3-Slot plug connector. This Pasternack TRB 3-Slot plug load/termination is rated for a maximum frequency of 500 MHz. Our TRB 3-Slot plug termination load is a MIL-STD-1553 termination with a 78 Ohm impedance. This TRB 3-Slot termination is manufactured with a brass body. This MIL-STD-1553 RF termination is commonly used to terminate devices such as bus couplers and bus relays. Our 78 Ohm RF termination has gasket made from rubber. Additional dimensions and specifications for this RF load termination are on our downloadable PDF datasheet above. Pasternack's PEMSY00002 termination has a TRB 3-Slot connector and is designed to withstand temperatures between -55 to +200 deg C. Our RF load/termination is an indispensable component in many RF, microwave and millimeter wave systems where signal reflection from unused ports can potentially damage the device or reduce signal integrity. This RF termination has a heatsink body that is designed to provide adequate heat dissipation within its full frequency of operation. Our RF termination has bronze inner conductor material with gold 30 micro inches plating. Our radio frequency termination is suitable for TRB PLUG applications. Pasternack is where to buy a 500 MHz RF load/termination for quick shipment worldwide because this is only one of more than a million RF parts/components we have available. Our TRB 3-Slot plug load termination is one of over 40,000 RF, microwave, and millimeter wave components in-stock at Pasternack. Our RF load termination will ship worldwide the same business day as purchased.

1 : $89.99
25 : $85.49
50 : $80.99
100 : $77.39

TC-375-716F-LP

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: 7/16 DIN, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: SPP-375-LLPL, Interface Type 2: SPO-375, Interface Type 3: SPF-375. 7/16 DIN Female Low PIM Connector Solder Attachment for SPP-375-LLPL, SPO-375, SPF-375. TC-375-716F-LP 7/16 DIN female coaxial connector has an interface type of 7/16 DIN female SPP-375-LLPL, SPO-375, SPF-375 and a 50 Ohm impedance. Pasternack 7/16 DIN female connector uses shield/contact solder/solder as an attachment method. Our female 7/16 DIN coaxial connector provides a minimum frequency of DC and a maximum frequency of 6 GHz. The Pasternack 7/16 DIN female coaxial connector has a PTFE dielectric type and a VSWR of 1.3. The Pasternack 7/16 DIN coaxial connector has a brass body with tri-metal plating. Our TC-375-716F-LP 7/16 DIN connector uses phosphor bronze contact and a tri-metal plating material. This 7/16 DIN female coaxial RF connector is RoHS and REACH compliant. This Pasternack female 7/16 DIN connector will ship the same day as purchased. Our 7/16 DIN female connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom 7/16 DIN connector cable assemblies that will ship the same day as well.

1 : $21.99
25 : $21.11
50 : $20.45
100 : $20.01

EZ-240-FM-75-X

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: F, Connector Gender: Male, Impedance: 75 Ohm, Body Style: Straight, Attachment Method: Crimp/Non-Solder Contact, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 1 GHz, Interface Type 1: LMR-240-75, Interface Type 2: LMR-240-75-DB, Interface Type 3: LMR-240-75-FR. 75 Ohm F Male Connector Crimp/Non-Solder Contact Attachment for LMR-240-75, LMR-240-75-DB, LMR-240-75-FR. EZ-240-FM-75-X Type F male coaxial connector has an interface type of Type F male which is compatible with LMR-240-75, LMR-240-75-DB and LMR-240-75-FR cables and has an impedance of 75 Ohms. Pasternack's Type F male connector uses crimp/non-solder contact as an attachment method. Our male Type F coaxial connector provides a maximum frequency of 1 GHz. This Type F male RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online Cable Creator. The Pasternack Type F male coaxial connector has a PTFE dielectric type and a VSWR of 1.3:1. Pasternack's Type F coaxial connector has a brass body with tri-metal plating. Our EZ-240-FM-75-X Type F connector uses a gold-plated beryllium copper contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from brass material has a contact life of 500 cycles or more. Our high-quality EZ-240-FM-75-X features a 80 µin minimum body plating specification. The EZ-240-FM-75-X Type F connector operates at a temperature range of -40 to 125 deg C. This push-on male Type F coaxial RF connector has a maximum insertion loss of 1 dB. This Type F connector has a gold inner contact plating. The Pasternack Type F male connector has a dielectric withstanding voltage of 750 Vrms. This coaxial RF connector comes with a minimum insulation resistance of 5,000 MOhms. Our Type F male connector has a length of 0.56 inches, a width of 0.56 inches, and a weight of 0.016 lbs. This Pasternack male Type F connector will ship the same business day as purchased. Our Type F male connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements, *LMR® is a registered trademark of Times Microwave Systems.

1 : $16.53

EZ-600-NMH-75

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: N, Connector Gender: Male, Impedance: 75 Ohm, Body Style: Straight, Attachment Method: Crimp/Non-Solder Contact, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 2 GHz, Interface Type 1: LMR-600-75, Interface Type 2: LMR-600-75-DB, Interface Type 3: LMR-600-75-FR. 75 Ohm N Male Connector Crimp/Non-Solder Contact Attachment for LMR-600-75, LMR-600-75-DB, LMR-600-75-FR. EZ-600-NMH-75 Type N male coaxial connector has an interface type of Type N male which is compatible with LMR-600-75, LMR-600-75-DB and LMR-600-75-FR cables and has an impedance of 75 Ohms. Pasternack's Type N male connector uses crimp/non-solder contact as an attachment method. Our male Type N coaxial connector provides a maximum frequency of 2 GHz. This Type N male RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online Cable Creator. The Pasternack Type N male coaxial connector has a PTFE dielectric type. Pasternack's Type N coaxial connector has a nickel body with gold plating. Our EZ-600-NMH-75 Type N connector uses a gold-plated beryllium copper contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. This Type N connector has a gold inner contact plating. The Pasternack Type N male connector has a dielectric withstanding voltage of 2,500 Vrms. Our Type N male connector has a length of 0.87 inches, a width of 0.87 inches, and a weight of 0.166 lbs. This Pasternack male Type N connector will ship the same business day as purchased. Our Type N male connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements, *LMR® is a registered trademark of Times Microwave Systems.

1 : $60.5

PEWAN062-10NM

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-62, Gain Min: 10, Beam Width, 3dB V: 51.6, Beam Width, 3dB H: 52.1, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz. WR-62 Standard Gain Horn with 10 dBi gain, N Male connector. The PEWAN062-10NM standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-62 input and a waveguide to coaxial transition adapter. Our WR-62 waveguide antenna features a type N male connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-62 standard gain horn antenna with a type N male input has a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. Pasternack’s PEWAN062-10NM waveguide horn antenna has a typical gain of 10 dBi. Our waveguide antenna has a typical vertical beam width of 51.6 degrees and a horizontal beam width of 52.1 degrees at 3 dB. This antenna has a length of 2.58 inches, a width of 1.31 inches, and a weight of 0.2 lbs. This WR-62 waveguide horn antenna with 10 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a type N male interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $1,630.0
5 : $1,564.8
10 : $1,499.6
25 : $1,434.4

PETP1006

Pasternack Enterprises

1 : $165.99
10 : $159.35
25 : $152.71

FMSW6382

Pasternack Enterprises

1 : $2,410.0
5 : $2,313.6
10 : $2,217.2
25 : $2,120.8

EZ-400-FM-75-X

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: F, Connector Gender: Male, Impedance: 75 Ohm, Attachment Method: Crimp/Non-Solder Contact, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 1 GHz, Interface Type 1: LMR-400-75, Interface Type 2: LMR-400-75-DB. 75 Ohm F Male Connector Crimp/Non-Solder Contact Attachment for LMR-400-75, LMR-400-75-DB. EZ-400-FM-75-X type F male coaxial connector has an interface type of type F male which is compatible with LMR-400-75 and LMR-400-75-DB cables and has an impedance of 75 Ohms. Pasternack’s type F male connector uses crimp/non-solder contact as an attachment method. Our male type F coaxial connector provides a maximum frequency of 1 GHz. This type F male RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online cable creator. The Pasternack type F male coaxial connector has a PTFE dielectric type and a VSWR of 1.3:1. Pasternack’s type F coaxial connector has a brass body with tri-metal plating. Our EZ-400-FM-75-X type F connector uses a gold-plated beryllium copper contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from brass material has a contact life of 500 cycles or more. Our high-quality EZ-400-FM-75-X features a 100 µin body plating specification. The EZ-400-FM-75-X type F connector operates at a temperature range of -40 to 125 deg C. This male type F coaxial RF connector has a maximum insertion loss of 0.1 dB. This type F connector has a gold inner contact plating. The Pasternack Type Fmale connector has a dielectric withstanding voltage of 750 Vrms. This coaxial RF connector comes with a minimum insulation resistance of 5,000 MOhms. Our type F male connector has a length of 1.457 inches, a width of 0.433 inches, and a weight of 0.068 lbs. This Pasternack male type F connector will ship the same business day as purchased. Our Type Fmale connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements. * LMR® is a registered trademark of Times Microwave Systems.

1 : $17.84
5 : $17.13
10 : $16.41
25 : $15.7

TC-240-SM-RA-SS-X

Pasternack Enterprises

Key Specifications (Click on Data Sheet Above for Additional Details) .PolarityStandardConnector SeriesSMAConnector GenderMaleImpedance50 OhmBody StyleRight AngleAttachment MethodCrimp/SolderMount MethodNoneMinimum FrequencyErrorMaximum Frequency3 GHz. Standard SMA Male Right Angle Connector Crimp/Solder Attachment for LMR-240, PE-C240. TC-240-SM-RA-SS-X SMA male right angle coaxial connector has an interface type of LMR-240, PE-C240 and a 50 Ohm impedance. Pasternack SMA male connector uses shield/contact crimp/solder as an attachment method. Our male SMA right angle coaxial connector provides a maximum frequency of 3 GHz. The Pasternack right angle SMA male coaxial connector has a teflon dielectric type and a VSWR of 1.35. The Pasternack SMA coaxial connector has a stainless steel body. Our TC-240-SM-RA-SS-X SMAright angle connector uses beryllium copper contact. This SMA male right angle coaxial RF connector is RoHS and REACH compliant. This Pasternack right angle male SMA connector will ship the same day as purchased. Our SMA right angle male connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom SMA connector cable assemblies that will ship the same day as well.*LMR™ is a Trademark of Times Microwave.

1 : $20.99

TC-400-SM

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: SMA, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Crimp/Solder, Mount Method: None, Interface Type 1: LMR-400, Interface Type 2: PE-C400. SMA Male Connector Crimp/Solder Attachment For LMR-400, PE-C400. TC-400-SM SMA male coaxial connector has an interface type of LMR-400, PE-C400 and a 50 Ohm impedance. Pasternack SMA male connector uses shield/contact crimp/solder as an attachment method. The Pasternack SMA male coaxial connector has a teflon dielectric type. The Pasternack SMA coaxial connector has a brass body with nickel plating. Our TC-400-SM SMA connector uses beryllium copper contact. This SMA male coaxial RF connector is RoHS and REACH compliant. This Pasternack male SMA connector will ship the same day as purchased. Our SMA male connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom SMA connector cable assemblies that will ship the same day as well, *LMR™ is a Trademark of Times Microwave.

1 : $27.99
25 : $26.87
50 : $26.03
100 : $25.47

PEW28CP005-30

Pasternack Enterprises

Key Specifications. Flange Type UG Cover Flange Flange Group Standard Minimum Frequency 26.5 GHz Maximum Frequency 40 GHz Maximum VSWR 1.5:1 Maximum Insertion Loss 0.3 dB Coupling 30 dB. WR-28 Waveguide 30 dB Broadwall Coupler, UG Cover Flange,2.92mm Female Coupled Port, 26.5 GHz to 40 GHz, Copper. The PEW28CP005-30 is a WR-28 Directional Broadwall waveguide coupler with 2.92mm female coupled port that operates inthe frequency range of 26.5 to 40 GHz. This Waveguide component has a maximum VSWR of 1.5:1. These designs are madeof painted copper alloy and incorporate a broad wall configuration that result in a mid-band nominal coupling value of 10, 20,30, 40 or 50 dB. Common applications for this component would be where power measurements are required within a systemfor measuring/sampling power or frequency monitoring with minimal signal loss to the main transmission line. Pasternackoffers a complete family of waveguide Crossguide and Broadwall couplers that are in-stock and ship same day.

1 : $3,050.0
5 : $2,989.0
10 : $2,928.0
25 : $2,867.0

PEWAD5008

Pasternack Enterprises

1 : $1,220.0
5 : $1,171.2
10 : $1,122.4

Teledyne HiRel

54ACTQ574DMQB

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS

54F158ADMQB

Teledyne HiRel

QUAD 2-INPUT MULTIPLEXER

54F38FMQB

Teledyne HiRel

QUAD 2-INPUT NAND BUFFER (OPEN COLLECTOR)

5962-8606311QXA

Teledyne HiRel

PROM, UV ERASABLE, 32K X 8, 200 NS ACCESS TIME
RoHS : Not Compliant

5962-8606312XA

Teledyne HiRel

PROM, UV ERASABLE, 32K X 8, 250 NS ACCESS TIME
RoHS : Not Compliant

5962-8680508QA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 16, 70 NS ACCESS TIME
RoHS : Not Compliant

5962-8751503KA

Teledyne HiRel

PROM, UV ERASABLE, 8K X 8, 70 NS ACCESS TIME
RoHS : Not Compliant

5962-87515073A

Teledyne HiRel

PROM, UV ERASABLE, 8K X 8, 35 NS ACCESS TIME
RoHS : Not Compliant

5962-8751511LA

Teledyne HiRel

PROM, UV ERASABLE, 8K X 8, 25 NS ACCESS TIME
RoHS : Not Compliant

5962-8761201CA

Teledyne HiRel

NOR GATE, QUAD 2-INPUT
RoHS : Not Compliant

5962-87628012A

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH NONINVERTING 3-STATE OUTPUTS, TTL-COMP. INPUTS
RoHS : Not Compliant

5962-8765101JA

Teledyne HiRel

PROM, 1K X 8, WITH 3-STATE OUTPUTS, 45 NS
RoHS : Not Compliant

5962-88518073A

Teledyne HiRel

PROM, 512 X 8, REGISTERED, 25 NS ACCESS TIME
RoHS : Not Compliant

5962-8855211XA

Teledyne HiRel

STATIC RAM, 32K X 8, LOW-POWER, 17 NS ACCESS TIME
RoHS : Not Compliant

5962-8865702FA

Teledyne HiRel

BINARY COUNTER, 4-BIT SYNCHRONOUS, PRESETTABLE, TLL-COMPATIBLE INPUTS
RoHS : Not Compliant

Waytek, Inc.

50230N

Hillsdale Terminal & Tool Inc

Nylon Ring Terminal 12-10 Gauge #10 Stud

100 : $0.1282
200 : $0.1163
500 : $0.1039
1,000 : $0.0942
5,000 : $0.0898

13,964

19043-0011

Molex

Auto-Blade Type Fuse Clip .250 Push-On
RoHS : Compliant

100 : $0.2551
200 : $0.236
500 : $0.2148
1,000 : $0.1985
5,000 : $0.1889

3,605

ELF5-16

NSPA

Solder Splice Connector 20-18 GA. Red

10 : $1.0617
50 : $0.9454
100 : $0.8581
200 : $0.829
500 : $0.8036
1,000 : $0.7708

1,795

6420180CLE5R2

ShawCor Ltd

DSG-Canusa 6420180CLE5R2 clear adhesive-lined heat shrink tubing is tubing sized for splice sealing and environmental protection of inline electrical connections. Its adhesive-lined construction supports moisture resistance, abrasion protection, and durable insulation in harness repair applications.

100 : $3.9349
500 : $3.5553

500

5550375BK00R3

ShawCor Ltd

DSG-Canusa 5550375BK00R3 CPA-300 heat shrink tubing is black adhesive-lined tubing with a .375" size for sealing and protecting cables, splices, and terminations. Its heavy-duty adhesive-lined construction supports strong moisture resistance, abrasion protection, and durable environmental sealing.

200 : $1.5789
1,000 : $1.4456

400

192210249

Molex

2/0 Copper Eyelet 1/4" Stud
RoHS : Compliant

10 : $2.8712
50 : $2.5613
100 : $2.3243
200 : $2.2423
500 : $2.1694
1,000 : $2.0873

382

4901-557F

QuickCable Corporation

1 GA Battery Lug Terminal 3/8" Stud Stackable Tinned Locking Anti-Rotation Teeth

1 : $8.21
10 : $7.39
50 : $6.79
100 : $6.58
200 : $6.38
500 : $6.21

179

409-1AH-V1-R1 12VDC

Song Chuan Precision Company

High Power 200A Auto Relay SPNO Sealed w/Resistor 12V (Waytek DISC)

1 : $65.93
5 : $62.13
10 : $60.23
50 : $57.24
100 : $54.53

169

67001-3

Grote Industries Inc

Clearance/ Marker LED Pigtail For 10 15 & 30 Series (Waytek Disco'd)

4 : $2.9326
50 : $2.4398
100 : $2.1193
200 : $1.9962
500 : $1.9099

133

2709

Blue Sea Systems

Dualbus 100A Busbar Cover Use w/78246 **RETAIL** **RETAIL**

1 : $16.32
10 : $16.32

FMS-25

Eaton Electronics

The Eaton Bussmann Series FMS-25 is a 25 amp, 32V automotive fuse designed for compact, high-density circuit protection in modern electrical systems. Featuring a slotted micro female Maxi (FMS) design, it fits space-constrained fuse holders while delivering reliable performance. Constructed with PA6T nylon housing and tin-plated copper terminals, it offers slow-blow protection, a 1,000A interrupt rating, and operates from -40C to +125C.

5 : $4.3983
50 : $3.8457
100 : $3.6039
200 : $3.3851
500 : $3.2469

672-P01-120-04

67 Series Red Battery Disconnect w/Integrated Manual disc way, no repl

1 : $72.47
5 : $71.25
10 : $70.05
50 : $68.84
100 : $67.64

7000030833

3M 7000030833 Diamond Grade Conspicuity Tape Roll is a 2" x 150' Series 983 reflective tape roll with an 11" red and 7" white pattern. It is DOT-2 certified, non-corroding, and up to six times brighter than conventional markings for high-visibility truck and trailer safety marking.

1 : $144.49
5 : $138.23
10 : $132.76
25 : $122.61

624 773 3 02

Rennsteig Tools Inc

Crimp Die Set Tyco Super Seal Terminals 1.5

1 : $294.82
10 : $277.92

19070-0143

Molex

12-10 GA #6 Ring Terminal Insulated Yellow Vinyl
RoHS : Compliant

50 : $0.2402
200 : $0.2276
500 : $0.2117
1,000 : $0.2033