| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
ESR-25VD-H-R Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
![]() TME | ESR10EZPF5600 | ROHM Semiconductor | Resistor: thick film; 560Ω; 0805; 500mW; ±1%; 2x1.25x0.55mm RoHS : Compliant |
| 10,000 | |
| ESR01MZPJ164 | ROHM Semiconductor | Resistor: thick film; 160kΩ; 0402; 200mW; ±5%; 1x0.5x0.35mm RoHS : Compliant |
| 10,000 | ||
| ESR01MZPJ182 | ROHM Semiconductor | Resistor: thick film; 1.8kΩ; 0402; 200mW; ±5%; 1x0.5x0.35mm RoHS : Compliant |
| 9,850 | ||
| ESR03EZPF43R0 | ROHM Semiconductor | Resistor: thick film; 43Ω; 0603; 250mW,330mW,333mW; ±1%; -55÷155°C RoHS : Compliant |
| 9,830 | ||
| ESR03EZPF16R0 | ROHM Semiconductor | Resistor: thick film; 16Ω; 0603; 250mW,330mW,333mW; ±1%; -55÷155°C RoHS : Compliant |
| 9,707 | ||
| ESR01MZPJ470 | ROHM Semiconductor | Resistor: thick film; 47Ω; 0402; 200mW; ±5%; 1x0.5x0.35mm RoHS : Compliant |
| 9,325 | ||
| ESR01MZPJ100 | ROHM Semiconductor | Resistor: thick film; 10Ω; SMD; 0402; 200mW; ±5%; 1x0.5x0.35mm RoHS : Compliant |
| 9,150 | ||
| ESR25JZPF6R80 | ROHM Semiconductor | Resistor: thick film; 6.8Ω; 1210; 1W; ±1%; -55÷155°C RoHS : Compliant |
| 4,000 | ||
| ESR25JZPJ3R3 | ROHM Semiconductor | Resistor: thick film; 3.3Ω; 1210; 660mW,1W; ±5%; 3.2x2.5x0.55mm RoHS : Compliant |
| 4,000 | ||
| PE4105C1ES_R1_00001 | PanJit Semiconductor | Diode: TVS array; 6÷7.5V; 13A; unidirectional; ESD; SOD523; Ch: 1 RoHS : Compliant |
| 2,280 | ||
| ESR5-NV3-30 | Eaton Corporation | Automation module: safety relay; 24VDC; IN: 4; ESR5; -20÷55°C; IP20 |
| 4 | ||
| PZS116V2BES_R1_00001 | PanJit Semiconductor | Diode: Zener; 150mW; 6.2V; SMD; SOD523; single diode; reel,tape RoHS : Compliant |
| 0 | ||
| PE4320ES_R1_00701 | PanJit Semiconductor | Diode: TVS; 22V; 5.8A; unidirectional; SOD523; Ch: 1 |
| 0 | ||
| PZS117V5BES_R1_00001 | PanJit Semiconductor | Diode: Zener; 150mW; 7.5V; SMD; SOD523; single diode; reel,tape RoHS : Compliant |
| 0 | ||
| PZS119V1BES_R1_00001 | PanJit Semiconductor | Diode: Zener; 150mW; 9.1V; SMD; SOD523; single diode; reel,tape RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | ESR10EZPJ121 | ROHM Semiconductor | AVAILABLE EU RoHS : Compliant | 3,278 | ||
| ESR18EZPF1002 | ROHM Semiconductor | AVAILABLE EU RoHS : Compliant | 380 | |||
| ESRG500ELL471ML15S | United Chemi-Con Inc | AVAILABLE EU | 300 | |||
| ESR01MZPF1801 | AVAILABLE EU | 7,180 | ||||
| ESR10EZPJ152 | ROHM Semiconductor | AVAILABLE EU RoHS : Compliant | 37,500 | |||
| ESR10EZPF1000 | ROHM Semiconductor | AVAILABLE EU RoHS : Compliant | 48 | |||
![]() NexGen Digital | ESR01MZPF10R0 | ROHM Semiconductor | RoHS : Compliant | 20,000 | ||
| ESR03EZPF7R68 | ROHM Semiconductor | RoHS : Compliant | 15,000 | |||
| ESR18EZPF1003 | ROHM Semiconductor | RoHS : Compliant | 5,000 | |||
| ESR10EZPJ331 | ROHM Semiconductor | RoHS : Compliant | 3,000 | |||
| ESR03EZPF75R0 | ROHM Semiconductor | RoHS : Compliant | 2,710 | |||
| ESR03EZPJ510 | ROHM Semiconductor | RoHS : Compliant | 750 | |||
![]() PEI Genesis | GTC030FW40-BES-RDS-025 | Amphenol Corporation |
| 0 | ||
| GA801GG16A4ESR | SOURIAU-SUNBANK |
| 0 | |||
| 89074GBESR | ITT Interconnect Solutions |
| 0 | |||
| 85048GBESR | Amphenol Positronic |
| 0 | |||
| GA801GG20R4ESR | SOURIAU-SUNBANK |
| 0 | |||
| 85045GBESR | Amphenol Positronic |
| 0 | |||
| AT16-18PE-SR02 | Amphenol Sine Systems |
| 0 | |||
| 85044GBESR | Amphenol Positronic | RoHS : Not Compliant |
| 0 | ||
| 85040GBESR | Amphenol Positronic |
| 0 | |||
| AT16-18SE-SR02 | Amphenol Sine Systems |
| 0 | |||
| 89074GBESR REV D | ITT Interconnect Solutions |
| 0 | |||
![]() Powell Electronics | 85048GBESR | Amphenol Positronic | Connector |
| 2 | |
| ESRF-HF-1000NL-01-02-01-02 | ES Systems | Inline Gas Flow Sensor |
| 1 | ||
| GTC06AF40-JES(RDS)(SP) | Amphenol Corporation | Connector |
| 1 | ||
![]() Richardson RFPD | NL-SW-LTE-SRC7611-4NG-B | NIMBEL_DKY | 4G/LTE CELULAR MODEM RoHS : Compliant | 0 | ||
![]() Chip 1 Exchange | ESR03EZPF1R00 | ROHM Semiconductor | INSTOCK RoHS : Compliant | 120,000 | ||
| ESR18EZPF2201 | ROHM Semiconductor | INSTOCK RoHS : Compliant | 55,156 | |||
| CMT2210LH-ESR | INSTOCK | 6,775 | ||||
| ESR10EZPF2200 | ROHM Semiconductor | INSTOCK RoHS : Compliant | 5,916 | |||
| ESR25JZPF6R20 | ROHM Semiconductor | INSTOCK RoHS : Compliant | 5,280 | |||
| ESR18EZPF68R0 | ROHM Semiconductor | INSTOCK RoHS : Compliant | 5,210 | |||
| ESR10EZPF2000 | ROHM Semiconductor | INSTOCK RoHS : Compliant | 4,693 | |||
| ESRD330M08R | INSTOCK | 3,353 | ||||
| LESR 25-NP | LEM Holdings SSA | INSTOCK | 3,034 | |||
| R1LP0108ESR5SIS0 | Renesas Electronics Corporation | INSTOCK | 2,192 | |||
| WS-012E+SR-403 | WELL | INSTOCK | 766 | |||
| ESR10EZPF4R22 | ROHM Semiconductor | INSTOCK RoHS : Compliant | 292 | |||
| ESR25JZPF1500 | ROHM Semiconductor | INSTOCK RoHS : Compliant | 70 | |||
| ESR10EZPF10R0 | INSTOCK | 26 | ||||
| OP184ESREEL7 | INSTOCK | 23 | ||||
![]() Avnet Asia | ESR10EZPJ5R1 | ROHM Semiconductor | SMD Chip Resistor, 5.1 Ohm, ? 5%, 500 mW, 0805 [2012 Metric], Thick Film, Anti-Surge, ESR Series (Alt: ESR10EZPJ5R1) RoHS : Compliant |
| 25,000 | |
| ESR03EZPF1000 | ROHM Semiconductor | SMD Chip Resistor, 100 Ohm, ? 1%, 333 mW, 0603 [1608 Metric], Thick Film, Anti-Surge, ESR Series (Alt: ESR03EZPF1000) RoHS : Compliant |
| 25,000 | ||
| ESR01MZPJ100 | ROHM Semiconductor | SMD Chip Resistor, 10 Ohm, ? 5%, 250 mW, 0402 [1005 Metric], Thick Film, Anti-Surge, ESR Series (Alt: ESR01MZPJ100) RoHS : Compliant | 0 | |||
| ESR10EZPJ151 | ROHM Semiconductor | SMD Chip Resistor, 150 Ohm, ? 5%, 500 mW, 0805 [2012 Metric], Thick Film, Anti-Surge, ESR Series (Alt: ESR10EZPJ151) RoHS : Compliant | 0 | |||
| ESR18EZPF1800 | ROHM Semiconductor | SMD Chip Resistor, 180 Ohm, ? 1%, 750 mW, 1206 [3216 Metric], Thick Film, Anti-Surge, ESR Series (Alt: ESR18EZPF1800) RoHS : Compliant | 0 | |||
| ESR18EZPJ102 | ROHM Semiconductor | SMD Chip Resistor, 1 kOhm, ? 5%, 500 mW, 1206 [3216 Metric], Thick Film, Anti-Surge, ESR Series (Alt: ESR18EZPJ102) RoHS : Compliant | 0 | |||
| ESR18EZPJ472 | ROHM Semiconductor | SMD Chip Resistor, 4.7 kOhm, ? 5%, 500 mW, 1206 [3216 Metric], Thick Film, Anti-Surge, ESR Series (Alt: ESR18EZPJ472) RoHS : Compliant | 0 | |||
| ESR03EZPD1001 | ROHM Semiconductor | SMD Chip Resistor, 1 kOhm, ? 0.5%, 333 mW, 0603 [1608 Metric], Thick Film, Anti-Surge, ESR Series (Alt: ESR03EZPD1001) RoHS : Compliant | 0 | |||
| ESR03PZPZJ100 | ROHM Semiconductor | CHIP RESISTOR 0603 2K OHM (Alt: ESR03PZPZJ100) RoHS : Compliant | 0 | |||
| ESR10EZPF2701 | ROHM Semiconductor | SMD Chip Resistor, 2.7 kOhm, ? 1%, 400 mW, 0805 [2012 Metric], Thick Film, Anti-Surge, ESR Series (Alt: ESR10EZPF2701) RoHS : Compliant |
| 0 | ||
| ESR10EZPF5R10 | ROHM Semiconductor | SMD Chip Resistor, 5.1 Ohm, ? 1%, 500 mW, 0805 [2012 Metric], Thick Film, Anti-Surge, ESR Series (Alt: ESR10EZPF5R10) RoHS : Compliant | 0 | |||
| ESR18EZPJ101 | ROHM Semiconductor | SMD Chip Resistor, 100 Ohm, ? 5%, 750 mW, 1206 [3216 Metric], Thick Film, Anti-Surge, ESR Series (Alt: ESR18EZPJ101) RoHS : Compliant | 0 | |||
| ESR03EZPJ272 | ROHM Semiconductor | SMD Chip Resistor, 2.7 kOhm, ? 5%, 333 mW, 0603 [1608 Metric], Thick Film, Anti-Surge, ESR Series (Alt: ESR03EZPJ272) RoHS : Compliant | 0 | |||
ESR10EZPF6490![]() | ROHM Semiconductor | SMD Chip Resistor, 649 Ohm, ? 1%, 500 mW, 0805 [2012 Metric], Thick Film, Anti-Surge, ESR Series (Alt: ESR10EZPF6490) RoHS : Compliant | 0 | |||
| ESR10EZPJ104 | ROHM Semiconductor | SMD Chip Resistor, 100 kOhm, ? 5%, 400 mW, 0805 [2012 Metric], Thick Film, Anti-Surge, ESR Series (Alt: ESR10EZPJ104) RoHS : Compliant | 0 | |||
![]() Avnet Silica | MVR5510AMDA0ESR2 | NXP Semiconductors | (Alt: MVR5510AMDA0ESR2) RoHS : Compliant | 16,000 | ||
| ESR10EZPJ | ROHM Semiconductor | ANTI SURGE CHIP RESISTOR 0805 CASE SIZE 5 (Alt: ESR10EZPJ) RoHS : Compliant | 0 | |||
| FXLS60322AESR2 | STMicroelectronics | ACCELEROMETER (Alt: FXLS60322AESR2) RoHS : Compliant | 0 | |||
| FXLS93422AESR2 | STMicroelectronics | ACCELEROMETER (Alt: FXLS93422AESR2) RoHS : Compliant | 0 | |||
| MC34VR500V6ESR2 | NXP Semiconductors | Conv DCDC Quad Step Down 28V to 45V 56Pin QFN EP TR (Alt: MC34VR500V6ESR2) RoHS : Compliant | 0 | |||
| MC34PF4210A0ESR2 | NXP Semiconductors | Step DownStep Up Converter and LDO Regulator 24OUT 56Pin QFN TR (Alt: MC34PF4210A0ESR2) RoHS : Compliant | 0 | |||
| MC33FS5502Y1ESR2 | NXP Semiconductors | (Alt: MC33FS5502Y1ESR2) RoHS : Compliant | 0 | |||
| MC33PF8200A0ESR2 | NXP Semiconductors | (Alt: MC33PF8200A0ESR2) RoHS : Compliant | 0 | |||
| MC33VR5500V1ESR2 | NXP Semiconductors | (Alt: MC33VR5500V1ESR2) RoHS : Compliant | 0 | |||
| MMPF0200NPAZESR2 | NXP Semiconductors | 12 Channel Configurable Power Management IC 56Pin QFN TR (Alt: MMPF0200NPAZESR2) RoHS : Compliant | 0 | |||
| MC33FS8410G6ESR2 | NXP Semiconductors | FailSafe System Basis Chip with Multiple SMPS and LDO 56Pin HVQFN TR (Alt: MC33FS8410G6ESR2) RoHS : Compliant | 0 | |||
| MFS2400AVMA0ESR2 | NXP Semiconductors | (Alt: MFS2400AVMA0ESR2) RoHS : Compliant | 0 | |||
| MC33PF8100FJESR2 | NXP Semiconductors | (Alt: MC33PF8100FJESR2) RoHS : Compliant | 0 | |||
| PE4105C1ES_R1_00001 | PanJit Semiconductor | (Alt: PE4105C1ES_R1_00001) RoHS : Compliant | 0 | |||
| PZS1136BES_R1_00001 | PanJit Semiconductor | Diode Zener Single 36V 150mW 2Pin SOD523 TR (Alt: PZS1136BES_R1_00001) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | NL-SW-LTE-SRC7611-4 | Airgain Inc | Skywire Cellular Modem, LTE CAT 4 Verizon firmware for North America, GPS, Skywire form factor |
| 0 | |
| NL-SW-LTE-SRC7611-4NG-B | Airgain Inc | Skywire Cellular Modem, LTE CAT 4 AT&T firmware for North America, no GPS, Skywire form factor |
| 0 | ||
| NL-SW-LTE-SRC7611-4NG | Airgain Inc | Skywire Cellular Modem, LTE CAT 4 AT&T firmware for North America, no GPS, Skywire form factor |
| 0 | ||
![]() DB Roberts | ESR-2031-200 | Sugatsune Kogyo Co Ltd |
| 1 | ||
| ESR-DC4513-22 | Sugatsune Kogyo Co Ltd |
| 1 | |||
| ESR-10-26 | Sugatsune Kogyo Co Ltd | 0 | ||||
| ESR-2031-300 | Sugatsune Kogyo Co Ltd | 0 | ||||
| ESR-3-26 | Sugatsune Kogyo Co Ltd | 0 | ||||
| ESR-13-14 | Sugatsune Kogyo Co Ltd | 0 | ||||
| ESR-6-14 | Sugatsune Kogyo Co Ltd | 0 | ||||
| ESR-9-20 | Sugatsune Kogyo Co Ltd | SS DRAWER SLIDE | 0 | |||
| ESR-SC4513-24 | Sugatsune Kogyo Co Ltd | 0 | ||||
| ESR-1-18 | Sugatsune Kogyo Co Ltd | 0 | ||||
| ESR-3813-12 | Sugatsune Kogyo Co Ltd | 0 | ||||
| ESR-10-24 | Sugatsune Kogyo Co Ltd | 0 | ||||
| ESR-9-28 | Sugatsune Kogyo Co Ltd | SS DRAWER SLIDE | 0 | |||
| ESR-2-24 | Sugatsune Kogyo Co Ltd | SS DRAWER SLIDE | 0 | |||
| ESR-1-12 | Sugatsune Kogyo Co Ltd | 0 | ||||
![]() Flip Electronics | FXLS93220AESR2 | NXP Semiconductors | Stock RoHS : Compliant | 360,000 | ||
| MCT2ESR2VM | onsemi | Stock, Ship Today RoHS : Compliant | 9,000 | |||
| MMPF0200NPAZESR2 | NXP Semiconductors | Stock RoHS : Compliant | 8,000 | |||
| MMPF0100F0AZESR2 | NXP Semiconductors | Stock RoHS : Compliant | 4,960 | |||
![]() Maritex | ESR03EZPJ221 | ROHM Semiconductor | Surface Mount Resistors; ESR03EZPJ221; ROHM; 220 ?; 5 %; Surface Mount; Yes RoHS : Compliant |
| 150,476 | |
| TP8485E-SR | 3peak Incorporated | RS-485/RS-422 Transceivers; TP8485E-SR; 3PEAK; 1; 1 RoHS : Compliant |
| 29,341 | ||
| ESR10EZPF1001 | ROHM Semiconductor | Surface Mount Resistors; ESR10EZPF1001; ROHM; 1 k?; 1 %; Surface Mount; Yes RoHS : Compliant |
| 18,396 | ||
| CMT2119AW-ESR | Hope Microelectronics Co Ltd | Chip; RF; transmitter; 868.35MHz; +13dBm; 2-wire; EEPROM; FSK/GFSK/OOK; 1.8-3.6V; 27.6mA; SOT23 6-pin |
| 3,000 | ||
| CMT2110AW-ESR | Hope Microelectronics Co Ltd | Chip; RF; transmitter; 240-480MHz; +13dBm; 2-wire; EEPROM; OOK; 1.8-3.6V; 13.4mA; SOT23 6-pin |
| 2,995 | ||
| CMT2210LH-ESR | Hope Microelectronics Co Ltd | Chip; RF; receiver; 300-960MHz; -109dBm; EEPROM; OOK; 2-5.5V; 4.5mA; SOP 8-pin |
| 2,958 | ||
| CMT2220LY-ESR | Hope Microelectronics Co Ltd | Chip; RF; receiver; 300-480MHz; -109dBm; Serial Data; OOK; 5.3mA; SOP 8-pin |
| 1,939 | ||
| KESQ2145MESR | Khatod Optoelectronic Srl | Lens for LED high power; angle: 25 degrees ; Number of LEDs: 1; Dimensions: 21.6x21.6mm; Height: 12.86mm; material: PC; silicone; Fastening: tape |
| 49 | ||
| ESR3D24A20200Z | ECE | Solid State Relay; contact rating current 2A; coil voltage 24VDC; input voltage 18-32VDC; output voltage 12-280VAC; assembly: THT |
| 19 | ||
| CMT2117AW-ESR | Hope Microelectronics Co Ltd | Chip; RF; transmitter; 240-960MHz; +13dBm; 2-wire; EEPROM; OOK; 1.8-3.6V; 15.5mA; SOT23 6-pin |
| 10 | ||
| ESR18EZPF1R30 | ROHM Semiconductor | Chip Resistor; SMD; 1206; 1R3; 1%; 1/2W; Anti-Surge RoHS : Compliant |
| 10 | ||
| INTEL REAL SENSE SR300 MODULE | Intel Corporation | Image Sensors; INTEL REAL SENSE SR300 MODULE; INTEL |
| 1 | ||
![]() Pasternack Enterprises US | PE-SR405FLJ | Pasternack Enterprises | Key Specifications, Generic Name: 086 Semi-rigid, Flex Type: Formable, Impedance: 50 Ohm, Dielectric Type: PTFE, Velocity of Propagation: 69.5 %, Jacket Diameter: 0.105 in, Jacket Material: FEP, No. of Shields: 1, Attenuation at 1 Ghz.: 19.5 dB, Power, Max at 1 Ghz.: 121.5 Watts, RF Shielding: 100 dB, Frequency, Max: 20 GHz, Max Operating Temperature: 125 deg C, Center Conductor Type: Solid, Inner Conductor, Number of Strands: 1, Minimum Bend Radius, One Time: 0.5 in, Minimum Bend Radius, Repeated: 0.787 in, Coax Type: Coax. Formable PE-SR405FLJ Coax Cable with Outer Conductor and Black FEP Jacket. The PE-SR405FLJ part number from Pasternack is a 086 Semi-rigid coax cable that is formable. Pasternack formable coax RF cable has an impedance of 50 Ohm and a PTFE dielectric. Our PE-SR405FLJ coax cable is constructed with a 0.105-inch jacket made of FEP. This black-colored coax cable has a nominal capacitance of 29 pF/Ft. This PE-SR405FLJ formable RF cable has a shield count of 1 and RF shielding of 100 dB. Our coax cable from Pasternack has a maximum frequency of 20 GHz. This PE-SR405FLJ 086 Semi-rigid cable has an attenuation of 19.5 dB/100ft at 1 GHz. Additional specifications for this PE-SR405FLJ single-shielded RF coaxial cable are on our downloadable PDF datasheet above. This RF cable has a one-time minimum bend radius of 0.5 inch and a repeat minimum bend radius of 0.787 inch. Our PE-SR405FLJ coax cable can operate at temperatures ranging from -55 to +125 degrees C. The black-colored coax cable has a typical insertion loss/attenuation of 15, 22.5, 54.9, 81.2 and 120 dB/100ft at frequency of 500 MHz, 1 GHz, 5 GHz, 10 GHz and 20 GHz respectively. The PE-SR405FLJ formable RF cable has a solid copper clad steel center conductor with silver conductor plating. Pasternack 086 Semi-rigid coax cables are part of our RF, microwave, and millimeter wave components. These formable cables and our other RF parts are available for same-day shipping worldwide. Custom RF cable assemblies using PE-SR405FLJ or other coax can be built and shipped the same business day as well. |
| 13,555 | |
| PE-SR405FL-BULK | Pasternack Enterprises | Key Specifications, Generic Name: 086 Semi-rigid, Flex Type: Formable, Impedance: 50 Ohm, Dielectric Type: PTFE, Velocity of Propagation: 69.5 %, No. of Shields: 1, Attenuation at 1 Ghz.: 22.5 dB, Power, Max at 1 Ghz.: 105 Watts, Frequency, Max: 20 GHz, Center Conductor Type: Solid, Inner Conductor, Number of Strands: 1, Minimum Bend Radius, Repeated: 0.78 in, Coax Type: Coax. Formable 086 Semi-rigid Coax Cable with Tinned Copper Braid Outer Conductor. PE-SR405FL-BULK part number from Pasternack is a 086 Semi-rigid coax cable that is formable. Pasternack PE-SR405FL formable coax cable is 50 Ohm and has a PTFE dielectric. PE-SR405FL coax has a shield count of 1 and the maximum frequency for this Pasternack cable is 20 GHz. PE-SR405FL coax cable has an attenuation at 1 GHz of 22.5 dB and a maximum power of 105 watts at 1 GHz. Pasternack 086 Semi-rigid coax cables are part of over 40,000 RF, microwave and millimeter wave components. PE-SR405FL cables and our other RF parts are available for same day shipping worldwide. Custom RF cable assemblies using PE-SR405FL or other coax can be built and shipped same day as well. |
| 3,704 | ||
| PE-SR402FLJ | Pasternack Enterprises | Key Specifications, Generic Name: 141 Semi-rigid, Flex Type: Formable, Impedance: 50 Ohm, Dielectric Type: PTFE, Velocity of Propagation: 70 %, Jacket Diameter: 0.161 in, Jacket Material: FEP, No. of Shields: 1, Attenuation at 1 Ghz.: 11.89 dB, Power, Max at 1 Ghz.: 303.4 Watts, RF Shielding: 100 dB, Frequency, Max: 34 GHz, Max Operating Temperature: 150 deg C, Center Conductor Type: Solid, Inner Conductor, Number of Strands: 1, Minimum Bend Radius, One Time: 0.315 in, Minimum Bend Radius, Repeated: 1.575 in, Coax Type: Coax. Formable PE-SR402FLJ Coax Cable with Tinned Copper Braid Outer Conductor and Black FEP Jacket. PE-SR402FLJ part number from Pasternack is a 141 Semi-rigid coax cable that is formable. Pasternack PE-SR402FLJ formable coax cable is 50 Ohm and has a PTFE dielectric. Our PE-SR402FLJ coax is constructed with a 0.161 jacket made of FEP. PE-SR402FLJ coax has a shield count of 1, a RF shielding of 100 dB and the maximum frequency for this Pasternack cable is 34 GHz. PE-SR402FLJ coax cable has an attenuation at 1 GHz of 11.89 dB and a maximum power of 303.4 watts at 1 GHz. Pasternack 141 Semi-rigid coax cables are part of over 40,000 RF, microwave and millimeter wave components. PE-SR402FLJ cables and our other RF parts are available for same day shipping worldwide. Custom RF cable assemblies using PE-SR402FLJ or other coax can be built and shipped same day as well. |
| 2,774 | ||
| PE-SR402-75-STRAIGHT | Pasternack Enterprises | Key Specifications, Generic Name: 141 Semi-rigid, Flex Type: Semi-Rigid, Impedance: 75 Ohm, Dielectric Type: PTFE, No. of Shields: 1, Attenuation at 1 Ghz.: 12.5 dB, Frequency, Max: 36 GHz, Max Operating Temperature: 200 deg C, Center Conductor Type: Solid, Inner Conductor, Number of Strands: 1, Coax Type: Coax. 75 Ohm 141 Semi-rigid Coax Cable with Copper. PE-SR402-75-STRAIGHT part number from Pasternack is a 141 Semi-rigid coax cable that is semi-rigid. Pasternack PE-SR402-75 semi-rigid coax cable is 75 Ohm and has a PTFE dielectric.PE-SR402-75 coax has a shield count of 1 and the maximum frequency for this Pasternack cable is 36 GHz. PE-SR402-75 coax cable has an attenuation at 1 GHz of 12.5 dB. Pasternack 141 Semi-rigid coax cables are part of over 40,000 RF, microwave and millimeter wave components. PE-SR402-75 cables and our other RF parts are available for same day shipping worldwide. Custom RF cable assemblies using PE-SR402-75 or other coax can be built and shipped same day as well. |
| 870 | ||
| PE-SR402AL | Pasternack Enterprises | Key Specifications, Generic Name: 141 Semi-rigid, Flex Type: Semi-Rigid, Impedance: 50 Ohm, Dielectric Type: PTFE, No. of Shields: 1, Attenuation at 1 Ghz.: 13 dB, Power, Max at 1 Ghz.: 450 Watts, Frequency, Max: 36 GHz, Max Operating Temperature: 125 deg C, Center Conductor Type: Solid, Inner Conductor, Number of Strands: 1, Minimum Bend Radius, Repeated: 0.15 in, Coax Type: Coax. 141 Semi-rigid Coax Cable with Tinned Aluminum. PE-SR402AL part number from Pasternack is a 141 Semi-rigid coax cable that is semi-rigid. Pasternack PE-SR402AL semi-rigid coax cable is 50 Ohm and has a PTFE dielectric.PE-SR402AL coax has a shield count of 1 and the maximum frequency for this Pasternack cable is 36 GHz. PE-SR402AL coax cable has an attenuation at 1 GHz of 13 dB and a maximum power of 450 watts at 1 GHz. Pasternack 141 Semi-rigid coax cables are part of over 40,000 RF, microwave and millimeter wave components. PE-SR402AL cables and our other RF parts are available for same day shipping worldwide. Custom RF cable assemblies using PE-SR402AL or other coax can be built and shipped same day as well. |
| 654 | ||
| PE-SR401FL | Pasternack Enterprises | Key Specifications, Generic Name: 250 Semi-rigid, Flex Type: Formable, Impedance: 50 Ohm, Dielectric Type: PTFE, Velocity of Propagation: 69.5 %, No. of Shields: 1, Attenuation at 1 Ghz.: 6.8 dB, Power, Max at 1 Ghz.: 279 Watts, RF Shielding: 100 dB, Frequency, Max: 18 GHz, Max Operating Temperature: 125 deg C, Center Conductor Type: Solid, Inner Conductor, Number of Strands: 1, Minimum Bend Radius, One Time: 0.75 in, Coax Type: Coax. Formable 250 Semi-rigid Coax Cable with Tinned Copper Braid Outer Conductor. PE-SR401FL part number from Pasternack is a 250 Semi-rigid coax cable that is formable. Pasternack PE-SR401FL formable coax cable is 50 Ohm and has a PTFE dielectric.PE-SR401FL coax has a shield count of 1, a RF shielding of 100 dB and the maximum frequency for this Pasternack cable is 18 GHz. PE-SR401FL coax cable has an attenuation at 1 GHz of 6.8 dB and a maximum power of 279 watts at 1 GHz. Pasternack 250 Semi-rigid coax cables are part of over 40,000 RF, microwave and millimeter wave components. PE-SR401FL cables and our other RF parts are available for same day shipping worldwide. Custom RF cable assemblies using PE-SR401FL or other coax can be built and shipped same day as well. |
| 622 | ||
| PE-SR047FL-BULK | Pasternack Enterprises | Key Specifications, Generic Name: 047 Semi-rigid, Flex Type: Formable, Impedance: 50 Ohm, Dielectric Type: PTFE, Velocity of Propagation: 69.5 %, No. of Shields: 1, Attenuation at 1 Ghz.: 36 dB, Power, Max at 1 Ghz.: 32 Watts, Frequency, Max: 20 GHz, Max Operating Temperature: 100 deg C, Center Conductor Type: Solid, Inner Conductor, Number of Strands: 1, Coax Type: Coax. Formable 047 Semi-rigid Coax Cable with Tinned Copper Braid Outer Conductor. PE-SR047FL-BULK part number from Pasternack is a 047 Semi-rigid coax cable that is formable. Pasternack PE-SR047FL formable coax cable is 50 Ohm and has a PTFE dielectric. PE-SR047FL coax has a shield count of 1 and the maximum frequency for this Pasternack cable is 20 GHz. PE-SR047FL coax cable has an attenuation at 1 GHz of 36 dB and a maximum power of 32 watts at 1 GHz. Pasternack 047 Semi-rigid coax cables are part of over 40,000 RF, microwave and millimeter wave components. PE-SR047FL cables and our other RF parts are available for same day shipping worldwide. Custom RF cable assemblies using PE-SR047FL or other coax can be built and shipped same day as well. |
| 480 | ||
| PE-SR402FL-BULK | Pasternack Enterprises | Key Specifications, Generic Name: 141 Semi-rigid, Flex Type: Formable, Impedance: 50 Ohm, Dielectric Type: PTFE, Velocity of Propagation: 69.5 %, Attenuation at 1 Ghz.: 12 dB, Power, Max at 1 Ghz.: 400 Watts, RF Shielding: 110 dB, Frequency, Max: 20 GHz, Max Operating Temperature: 125 deg C, Center Conductor Type: Solid, Inner Conductor, Number of Strands: 1, Minimum Bend Radius, Repeated: 0.625 in, Coax Type: Coax. Formable 141 Semi-rigid Coax Cable with Tinned Copper Braid Outer Conductor. PE-SR402FL-BULK part number from Pasternack is a 141 Semi-rigid coax cable that is formable. Pasternack PE-SR402FL formable coax cable is 50 Ohm and has a PTFE dielectric. PE-SR402FL coax has a shield count of, a RF shielding of 110 dB and the maximum frequency for this Pasternack cable is 20 GHz. PE-SR402FL coax cable has an attenuation at 1 GHz of 12 dB and a maximum power of 400 watts at 1 GHz. Pasternack 141 Semi-rigid coax cables are part of over 40,000 RF, microwave and millimeter wave components. PE-SR402FL cables and our other RF parts are available for same day shipping worldwide. Custom RF cable assemblies using PE-SR402FL or other coax can be built and shipped same day as well. |
| 356 | ||
| PE-SR405AL-BULK | Pasternack Enterprises | Key Specifications, Generic Name: 086 Semi-rigid, Flex Type: Semi-Rigid, Impedance: 50 Ohm, Dielectric Type: PTFE, No. of Shields: 1, Attenuation at 1 Ghz.: 23 dB, Power, Max at 1 Ghz.: 130 Watts, Frequency, Max: 40 GHz, Max Operating Temperature: 125 deg C, Center Conductor Type: Solid, Inner Conductor, Number of Strands: 1, Minimum Bend Radius, One Time: 0.05 in, Coax Type: Coax. 086 Semi-rigid Coax Cable with Tinned Aluminum Outer Conductor. PE-SR405AL-BULK part number from Pasternack is a 086 Semi-rigid coax cable that is semi-rigid. Pasternack PE-SR405AL semi-rigid coax cable is 50 Ohm and has a PTFE dielectric. PE-SR405AL coax has a shield count of 1 and the maximum frequency for this Pasternack cable is 40 GHz. PE-SR405AL coax cable has an attenuation at 1 GHz of 23 dB and a maximum power of 130 watts at 1 GHz. Pasternack 086 Semi-rigid coax cables are part of over 40,000 RF, microwave and millimeter wave components. PE-SR405AL cables and our other RF parts are available for same day shipping worldwide. Custom RF cable assemblies using PE-SR405AL or other coax can be built and shipped same day as well. |
| 219 | ||
| PE-SR047AL | Pasternack Enterprises | Key Specifications, Generic Name: 047 Semi-rigid, Flex Type: Semi-Rigid, Impedance: 50 Ohm, Dielectric Type: PTFE, Velocity of Propagation: 69.5 %, No. of Shields: 1, Attenuation at 1 Ghz.: 41 dB, Power, Max at 1 Ghz.: 32 Watts, RF Shielding: 90 dB, Frequency, Max: 20 GHz, Max Operating Temperature: 100 deg C, Center Conductor Type: Solid, Inner Conductor, Number of Strands: 1, Minimum Bend Radius, Repeated: 0.05 in, Coax Type: Coax. 047 Semi-rigid Coax Cable with Tinned Aluminum Outer Conductor. PE-SR047AL part number from Pasternack is a 047 Semi-rigid coax cable that is semi-rigid. Pasternack PE-SR047AL semi-rigid coax cable is 50 Ohm and has a PTFE dielectric.PE-SR047AL coax has a shield count of 1, a RF shielding of 90 dB and the maximum frequency for this Pasternack cable is 20 GHz. PE-SR047AL coax cable has an attenuation at 1 GHz of 41 dB and a maximum power of 32 watts at 1 GHz. Pasternack 047 Semi-rigid coax cables are part of over 40,000 RF, microwave and millimeter wave components. PE-SR047AL cables and our other RF parts are available for same day shipping worldwide. Custom RF cable assemblies using PE-SR047AL or other coax can be built and shipped same day as well. |
| 82 | ||
| PE-SR047-NM-BULK | Pasternack Enterprises | Key Specifications, Generic Name: 047 Semi-rigid, Flex Type: Semi-Rigid, Impedance: 50 Ohm, Dielectric Type: PTFE, Velocity of Propagation: 69.5 %, RF Shielding: 165 dB, Frequency, Max: 109 GHz, Max Operating Temperature: 100 deg C, Center Conductor Type: Solid, Inner Conductor, Number of Strands: 1, Minimum Bend Radius, One Time: 0.05 in, Coax Type: Coax. 0.047 Semi Rigid Non-Magnetic Cable with Silver Plated Copper Conductor. The PE-SR047-NM-BULK part number from Pasternack is a non-magnetic coax cable that is semi-rigid. Pasternack semi-rigid coax RF cable has an impedance of 50 Ohm and a PTFE dielectric. This RF coaxial cable is ideal for general purpose test, custom cable assemblies, medical, military and aerospace and quantum computing applications. This PE-SR047-NM semi-rigid RF cable has a minimum RF shielding of 165 dB. Our coax cable from Pasternack has a maximum frequency of 109 GHz. Additional specifications for this PE-SR047-NM-BULK RF coaxial cable are on our downloadable PDF datasheet above. This semi-rigid coax RF cable has a one-time minimum bend radius of 0.05 inch. Our PE-SR047-NM coax cable can operate at temperatures ranging from -55 to +100 degrees C. The PE-SR047-NM-BULK semi-rigid RF cable has a solid copper center conductor with silver plating. This non-magnetic RF coaxial cable has an outer diameter of 0.047 inches. Pasternack non-magnetic coax cables are part of our RF, microwave, and millimeter wave components. These semi-rigid cables and our other RF parts are available for same-day shipping worldwide. Custom RF cable assemblies using PE-SR047-NM or other coax can be built and shipped the same business day as well. |
| 73 | ||
| PE-SR402TN-STRAIGHT | Pasternack Enterprises | Key Specifications, Generic Name: RG402 Tinned, Flex Type: Semi-Rigid, Impedance: 50 Ohm, Dielectric Type: PTFE, No. of Shields: 1, Attenuation at 1 Ghz.: 12 dB, Frequency, Max: 36 GHz, Max Operating Temperature: 125 deg C, Center Conductor Type: Solid, Minimum Bend Radius, One Time: 1 in, Coax Type: Coax. RG402 Tinned Coax Cable with Tinned Copper Outer Conductor. PE-SR402TN-STRAIGHT part number from Pasternack is a RG402 Tinned coax cable that is semi-rigid. Pasternack RG402 Tinned semi-rigid coax cable is 50 Ohm and has a PTFE dielectric.RG402 Tinned coax has a shield count of 1 and the maximum frequency for this Pasternack cable is 36 GHz. RG402 Tinned coax cable has an attenuation at 1 GHz of 12 dB. Pasternack RG402 Tinned coax cables are part of over 40,000 RF, microwave and millimeter wave components. RG402 Tinned cables and our other RF parts are available for same day shipping worldwide. Custom RF cable assemblies using RG402 Tinned or other coax can be built and shipped same day as well. |
| 72 | ||
| PE-SR047AL-BULK | Pasternack Enterprises | Key Specifications, Generic Name: 047 Semi-rigid, Flex Type: Semi-Rigid, Impedance: 50 Ohm, Dielectric Type: PTFE, Velocity of Propagation: 69.5 %, No. of Shields: 1, Attenuation at 1 Ghz.: 41 dB, Power, Max at 1 Ghz.: 32 Watts, RF Shielding: 90 dB, Frequency, Max: 20 GHz, Max Operating Temperature: 100 deg C, Center Conductor Type: Solid, Inner Conductor, Number of Strands: 1, Minimum Bend Radius, Repeated: 0.05 in, Coax Type: Coax. 047 Semi-rigid Coax Cable with Tinned Aluminum Outer Conductor. PE-SR047AL-BULK part number from Pasternack is a 047 Semi-rigid coax cable that is semi-rigid. Pasternack PE-SR047AL semi-rigid coax cable is 50 Ohm and has a PTFE dielectric. PE-SR047AL coax has a shield count of 1, a RF shielding of 90 dB and the maximum frequency for this Pasternack cable is 20 GHz. PE-SR047AL coax cable has an attenuation at 1 GHz of 41 dB and a maximum power of 32 watts at 1 GHz. Pasternack 047 Semi-rigid coax cables are part of over 40,000 RF, microwave and millimeter wave components. PE-SR047AL cables and our other RF parts are available for same day shipping worldwide. Custom RF cable assemblies using PE-SR047AL or other coax can be built and shipped same day as well. |
| 35 | ||
| PE-SR405AL-STRAIGHT | Pasternack Enterprises | Key Specifications, Generic Name: 086 Semi-rigid, Flex Type: Semi-Rigid, Impedance: 50 Ohm, Dielectric Type: PTFE, No. of Shields: 1, Attenuation at 1 Ghz.: 23 dB, Frequency, Max: 40 GHz, Max Operating Temperature: 125 deg C, Center Conductor Type: Solid, Inner Conductor, Number of Strands: 1, Minimum Bend Radius, One Time: 0.05 in, Coax Type: Coax. 086 Semi-rigid Coax Cable with Tinned Aluminum Outer Conductor. PE-SR405AL-STRAIGHT part number from Pasternack is a 086 Semi-rigid coax cable that is semi-rigid. Pasternack PE-SR405AL semi-rigid coax cable is 50 Ohm and has a PTFE dielectric.PE-SR405AL coax has a shield count of 1 and the maximum frequency for this Pasternack cable is 40 GHz. PE-SR405AL coax cable has an attenuation at 1 GHz of 23 dB. Pasternack 086 Semi-rigid coax cables are part of over 40,000 RF, microwave and millimeter wave components. PE-SR405AL cables and our other RF parts are available for same day shipping worldwide. Custom RF cable assemblies using PE-SR405AL or other coax can be built and shipped same day as well. |
| 0 | ||
| PE-SR402TN-STR-BULK | Pasternack Enterprises | Key Specifications, Generic Name: RG402 Tinned, Flex Type: Semi-Rigid, Impedance: 50 Ohm, Dielectric Type: PTFE, Velocity of Propagation: 69.5 %, Attenuation at 1 Ghz.: 12 dB, Frequency, Max: 36 GHz, Max Operating Temperature: 125 deg C, Center Conductor Type: Solid, Minimum Bend Radius, One Time: 1 in, Coax Type: Coax. RG402 Tinned Coax Cable (by foot) with Tinned Copper Outer Conductor. PE-SR402TN-STR-BULK part number from Pasternack is a RG402 Tinned coax cable that is semi-rigid. Pasternack RG402 Tinned semi-rigid coax cable is 50 Ohm and has a PTFE dielectric. RG402 Tinned coax has a shield count of and the maximum frequency for this Pasternack cable is 36 GHz. RG402 Tinned coax cable has an attenuation at 1 GHz of 12 dB. Pasternack RG402 Tinned coax cables are part of over 40,000 RF, microwave and millimeter wave components. RG402 Tinned cables and our other RF parts are available for same day shipping worldwide. Custom RF cable assemblies using RG402 Tinned or other coax can be built and shipped same day as well. |
| 0 | ||
![]() TE Connectivity | 6ESRM-3 | TE Connectivity | 6ESRM-3=F6920 Current Rating: 15 A Filter Connector Type: IEC 60320-1 C-14 Filter Connector Style: Male Receptacle Output Termination Type: 1/4" Faston Iec Unfiltered Inlets & Corcom Sr Series | 15 A IEC 60320-1 C-14 Male Receptacle 1/4" Faston | Part Number: 6ESRM-3 | Internal Number: 1609133-3 | TE Connectivity RoHS : Compliant |
| 1,675 | |
| 6ESRFC3 | TE Connectivity | 6ESRFC3=F6987 Current Rating: 15 A Filter Connector Type: IEC 60320-1 C-13 Filter Connector Style: Female Receptacle Output Termination Type: 1/4" Faston Iec Unfiltered Inlets & Corcom Sr Series | 15 A IEC 60320-1 C-13 Female Receptacle 1/4" Faston | Part Number: 6ESRFC3 | Internal Number: 1609133-2 | TE Connectivity RoHS : Compliant |
| 1,576 | ||
| 6ESRM-P | TE Connectivity | 6ESRM-P=F6990 Current Rating: 15 A Filter Connector Type: IEC 60320-1 C-14 Filter Connector Style: Male Receptacle Output Termination Type: PCB Mount Iec Unfiltered Inlets & Corcom Sr Series | 15 A IEC 60320-1 C-14 Male Receptacle PCB Mount | Part Number: 6ESRM-P | Internal Number: 1609078-1 | TE Connectivity RoHS : Compliant |
| 1,123 | ||
| 6ESRMC2 | TE Connectivity | 6ESRMC2=F6989 Current Rating: 15 A Filter Connector Type: IEC 60320-1 C-14 Filter Connector Style: Male Receptacle Output Termination Type: 3/16" Faston Iec Unfiltered Inlets & Corcom Sr Series | 15 A IEC 60320-1 C-14 Male Receptacle 3/16" Faston | Part Number: 6ESRMC2 | Internal Number: 1609133-4 | TE Connectivity RoHS : Compliant |
| 485 | ||
![]() Vyrian | MC33PF8200ETESR2 | NXP Semiconductors | Power Supply Management Circuit, Adjustable, 12 Channel, +2.8V, PQCC56 RoHS : Compliant | 11,805 | ||
REF195ES-REEL![]() | Analog Devices Inc | Three Terminal Voltage Reference, 1 Output, 5V, CMOS, PDSO8 RoHS : Not Compliant | 11,757 | |||
| MC33PF3000A5ESR2 | NXP Semiconductors | Power Supply Support Circuit, Adjustable, 12 Channel, MOS RoHS : Compliant | 10,621 | |||
| MFS8610BMBA0ESR2 | NXP Semiconductors | Power Supply Management Circuit, Fixed, 1 Channel RoHS : Compliant | 10,337 | |||
| MC33PF8200A0ESR2 | NXP Semiconductors | Power Supply Management Circuit, Adjustable, 12 Channel, +2.8V, PQCC56 RoHS : Compliant | 9,786 | |||
OP213ES-REEL7![]() | Analog Devices Inc | Operational Amplifier, 2 Func, 150uV Offset-Max, BIPolar, PDSO8 RoHS : Not Compliant | 8,217 | |||
ESR18EZPF1430![]() | ROHM Semiconductor | Fixed Resistor, Metal Glaze/thick Film, 0.33W, 143ohm, 200V, 1% +/-Tol, 100ppm/Cel, 1206 RoHS : Compliant | 7,915 | |||
| MVR5510AMDANESR2 | NXP Semiconductors | Power Supply Management Circuit, Adjustable, 9 Channel, +7.5V, PQCC56 RoHS : Compliant | 7,729 | |||
| MMPF0100FCANESR2 | NXP Semiconductors | Power Supply Support Circuit, Adjustable, 14 Channel RoHS : Compliant | 6,956 | |||
| MC33FS8410G6ESR2 | NXP Semiconductors | Power Supply Management Circuit, Fixed, 6 Channel, +7.5V, PQCC56 RoHS : Compliant | 5,686 | |||
| MPF7100BVBA3ESR2 | NXP Semiconductors | Power Supply Management Circuit, Adjustable, 7 Channel, +2.8V, PQCC48 RoHS : Compliant | 4,994 | |||
| MFS8612BMDA0ESR2 | NXP Semiconductors | Power Supply Management Circuit, Fixed, 1 Channel RoHS : Compliant | 4,783 | |||
| MC34PF4210A0ESR2 | NXP Semiconductors | Power Supply Support Circuit, Adjustable, 14 Channel, +2.4V, PQCC56 RoHS : Compliant | 4,767 | |||
| MVR5510AMBAHESR2 | NXP Semiconductors | Power Supply Management Circuit, Adjustable, 9 Channel, +7.5V, PQCC56 RoHS : Compliant | 4,651 | |||
| CM7V-T1ALOWESR32.768KHZ12.5PF+/-20PPMTAQC | Micro Crystal Ag | Parallel - Fundamental Quartz Crystal, 0.032768MHz Nom | 310 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |