E16ZAD-R Price, Reseller, Stock

VoIP Stainless Steel Emergency Phone, Flush Mount with Included Rough-In Box or Surface Mount with an Optional VE-5x5 with Enhanced Weather Protection

1 : $604.58

E-1600-60A

Cooper Interconnect

ADA Compliant Handsfree Emergency Phone w/ 5 Number Dialer and Voice Announcer, Blue w/ Police Verbiage

1 : $330.58

WSE16I-24162100A00

SICK AG

Small PE Sensor, Thru-beam, Rectang, R: 45m, 850nm, 10-30VDC, PNP/NPN, M12M 4p Conn

1 : $879.99

Pasternack Enterprises US

PE1610

Pasternack Enterprises

Key Specifications, RF Port Connector Series: 2.4mm, DC Port Connector Series: SMA, Minimum Frequency: 0.05 MHz, Maximum Frequency: 50 GHz, RF Port Maximum VSWR: 1.8:1, Maximum Voltage: 25 Volts, Maximum DC Current: 150 mA. 50 kHz to 50 GHz 2.4mm Bias Tee Rated to 150 mA and 25 Volts DC. PE1610 bias tee (also called bias T) has an 2.4mm connector RF port that is female gender. This Pasternack female 2.4mm bias tee design is rated for a minimum frequency of 0.05 MHz and a maximum frequency of 50 GHz. Our RF coaxial bias tee has a sma DC port connector with a female gender. This 2.4mm bias tee / T is rated for a max. DC voltage of 25 Volts and a max. current of 150 mA. The PE1610 bias T with 2.4mm connector series for RF port is designed with a maximum VSWR of 1.8:1 and a RF to bias isolation typical of 50 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial 2.4mm bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts.

1 : $2,640.0
5 : $2,534.4
10 : $2,428.8

PE1604

Pasternack Enterprises

Key Specifications, RF Port Connector Series: SMA, DC Port Connector Series: Solder Pin, Minimum Frequency: 100 MHz, Maximum Frequency: 6 GHz, RF Port Maximum VSWR: 1.5:1, Maximum Voltage: 50 Volts, Maximum DC Current: 500 mA. 100 MHz to 6 GHz SMA Bias Tee Rated to 500 mA and 50 Volts DC. PE1604 bias tee (also called bias T) has an SMA connector RF port that is female gender. This Pasternack female SMA bias tee design is rated for a minimum frequency of 100 MHz and a maximum frequency of 6 GHz. Our RF coaxial bias tee has a solder pin DC port connector with a female gender. This SMA bias tee / T is rated for a max. DC voltage of 50 Volts and a max. current of 500 mA. The PE1604 bias T with SMA connector series for RF port is designed with a maximum VSWR of 1.5:1 and a RF to bias isolation typical of 25 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial SMA bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts.

1 : $715.0
10 : $686.4
25 : $657.8

PE1621

Pasternack Enterprises

Key Specifications, RF Port Connector Series: 2.92mm, DC Port Connector Series: Pin, Minimum Frequency: 10 MHz, Maximum Frequency: 40 GHz, RF Port Maximum VSWR: 2:1, Maximum Voltage: 16 Volts, Maximum DC Current: 250 mA. 10 MHz to 40 GHz 2.92mm Bias Tee Rated to 250 mA and 16 Volts DC. PE1621 bias tee (also called bias T) has an 2.92mm connector RF port that is female gender. This Pasternack female 2.92mm bias tee design is rated for a minimum frequency of 10 MHz and a maximum frequency of 40 GHz. Our RF coaxial bias tee has a pin DC port connector with a female gender. This 2.92mm bias tee / T is rated for a max. DC voltage of 16 Volts and a max. current of 250 mA. The PE1621 bias T with 2.92mm connector series for RF port is designed with a maximum VSWR of 2:1. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial 2.92mm bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts.

1 : $2,170.0
5 : $2,126.6
10 : $2,083.2

PE1622

Pasternack Enterprises

Key Specifications, RF Port Connector Series: 2.92mm, DC Port Connector Series: Pin, Minimum Frequency: 500 MHz, Maximum Frequency: 40 GHz, RF Port Maximum VSWR: 2:1, Maximum Voltage: 50 Volts, Maximum DC Current: 1,000 mA. 500 MHz to 40 GHz 2.92mm Bias Tee Rated to 1000 mA and 50 Volts DC. PE1622 bias tee (also called bias T) has an 2.92mm connector RF port that is female gender. This Pasternack female 2.92mm bias tee design is rated for a minimum frequency of 500 MHz and a maximum frequency of 40 GHz. Our RF coaxial bias tee has a pin DC port connector with a female gender. This 2.92mm bias tee / T is rated for a max. DC voltage of 50 Volts and a max. current of 1,000 mA. The PE1622 bias T with 2.92mm connector series for RF port is designed with a maximum VSWR of 2:1. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial 2.92mm bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts.

1 : $2,480.0
5 : $2,430.4
10 : $2,380.8

PE1606A

Pasternack Enterprises

Key Specifications, RF Port Connector Series: SMA, DC Port Connector Series: Solder Pin, Minimum Frequency: 0.1 MHz, Maximum Frequency: 12.4 GHz, RF Port Maximum VSWR: 1.6:1, Maximum Voltage: 24 Volts, Maximum DC Current: 750 mA. 0.1 MHz to 12.4 GHz SMA Bias Tee Rated to 750 mA And 24 Volts DC. PE1606A bias tee (also called bias T) has an SMA connector RF port that is female gender. This Pasternack female SMA bias tee design is rated for a minimum frequency of 0.1 MHz and a maximum frequency of 12.4 GHz. Our RF coaxial bias tee has a solder pin DC port connector with a female gender. This SMA bias tee / T is rated for a max. DC voltage of 24 Volts and a max. current of 750 mA. The PE1606A bias T with SMA connector series for RF port is designed with a maximum VSWR of 1.6:1 and a RF to bias isolation maximum of 30 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial SMA bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts.

1 : $1,020.0
5 : $979.2
10 : $938.4

PE1660

Pasternack Enterprises

Key Specifications, RF Port Connector Series: 1.0mm, DC Port Connector Series: SMC, Minimum Frequency: 100 MHz, Maximum Frequency: 110 GHz, Maximum Voltage: 16 Volts, Maximum DC Current: 0.4 Amps. 100 MHz to 110 GHz Ultra-Wide Band Bias Tee 1.0mm(m) input, 1.0mm(f) output, SMC(m) bias Rated to 0.4 Amps and 16 Volts DC. PE1660 bias tee (also called bias T) has an 1.0mm connector RF port that is male gender. This Pasternack male 1.0mm bias tee design is rated for a minimum frequency of 100 MHz and a maximum frequency of 110 GHz. Our RF coaxial bias tee has a smc DC port connector with a male gender. This 1.0mm bias tee / T is rated for a max. DC voltage of 16 Volts and a max. current of 0.4 Amps. The PE1660 bias T with 1.0mm connector series for RF port is designed with a maximum VSWR of. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial 1.0mm bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts.

1 : $16,050.0
5 : $15,408.0
10 : $14,766.0
25 : $14,124.0

PE1647

Pasternack Enterprises

Key Specifications, RF Port Connector Series: F, DC Port Connector Series: BNC, Minimum Frequency: 10 MHz, Maximum Frequency: 3 GHz, RF Port Maximum VSWR: 1.8:1, Maximum Voltage: 100 Volts, Maximum DC Current: 2,500 mA. 10 MHz to 3 GHz, Type F 75 Ohm Bias Tee, Rated 2.5 Amps and 100 Volts, DC BNC Connector. PE1647 bias tee (also called bias T) has a type F connector RF port that is male gender. This broadband bias tee is available with 75 Ohm RF/DC port connector impedance. This Pasternack male type F bias tee design is rated for a minimum frequency of 10 MHz and a maximum frequency of 3 GHz. Our RF coaxial bias tee has a type F DC port connector with a male gender. This type F bias tee / T is rated for a max. DC voltage of 100 Volts and a max. current of 2,500 mA. The PE1647 bias T with type F connector series for RF port is designed with a maximum VSWR of 1.8:1 and a RF to bias isolation typical of 45 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial F type bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts. The Pasternack's PE1647 bias tee, a three-port network, is used to adjust the DC bias point of some electrical components without affecting other components. The Pasternack's PE1647 broadband bias tee from Pasternack operates at temperature ranging from -55°C to 105°C. Our F type high-reliability bias tee is generally used to insert DC power into an AC signal to power remote antenna amplifiers or other devices. The PE1647 F type bias tee has typical and maximum insertion loss of 1 dB and 3 dB respectively. Our coaxial broadband bias tee is just part of more than one million RF, microwave and millimeter wave components we carry in-stock. This bias tee with type F RF port is ready to buy and be shipped worldwide. For further information on similar products, our expert technical support and trained sales team can get you to the perfect bias tee as per your requirement.

1 : $1,020.0
5 : $979.2
10 : $938.4
25 : $897.6

PE1624

Pasternack Enterprises

Key Specifications, RF Port Connector Series: SMA, DC Port Connector Series: SMA, Minimum Frequency: 10 MHz, Maximum Frequency: 2.5 GHz, RF Port Maximum VSWR: 1.5:1, Maximum Voltage: 100 Volts, Maximum DC Current: 2,500 mA. 10 MHz to 2.5 GHz SMA Broadband Bias Tee, Male Input, Rated to 2.5 Amps and 100 Volts, DC SMA connector. PE1624 bias tee (also called bias T) has a SMA connector RF port that is male gender. This broadband bias tee is available with 50 Ohm RF/DC port connector impedance. This Pasternack male SMA bias tee design is rated for a minimum frequency of 10 MHz and a maximum frequency of 2.5 GHz. Our RF coaxial bias tee has a SMA DC port connector with a male gender. This SMA bias tee / T is rated for a max. DC voltage of 100 Volts and a max. current of 2,500 mA. The PE1624 bias T with SMA connector series for RF port is designed with a maximum VSWR of 1.5:1 and a RF to bias isolation typical of 50 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial SMA bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts. The Pasternack's PE1624 bias tee, a three-port network, is used to adjust the DC bias point of some electrical components without affecting other components. The Pasternack's PE1624 broadband bias tee from Pasternack operates at temperature ranging from -55°C to 105°C. Our SMA high-reliability bias tee is generally used to insert DC power into an AC signal to power remote antenna amplifiers or other devices. The PE1624 SMA bias tee has typical and maximum insertion loss of 0.3 dB and 1 dB respectively. Our coaxial broadband bias tee is just part of more than one million RF, microwave and millimeter wave components we carry in-stock. This bias tee with SMA RF port is ready to buy and be shipped worldwide. For further information on similar products, our expert technical support and trained sales team can get you to the perfect bias tee as per your requirement.

1 : $1,260.0
5 : $1,209.6
10 : $1,159.2
25 : $1,108.8

PE1640

Pasternack Enterprises

Key Specifications, RF Port Connector Series: 2.92mm, DC Port Connector Series: SMA, Minimum Frequency: 0.012 MHz, Maximum Frequency: 40 GHz, RF Port Maximum VSWR: 2.5:1, Maximum Voltage: 16 Volts, Maximum DC Current: 150 mA. 12 KHz to 40 GHz 2.92mm Broadband Bias Tee, Male Input, Rated to 150 mA and 16 Volts, DC SMA Connector. PE1640 bias tee (also called bias T) has a 2.92mm connector RF port that is male gender. This broadband bias tee is available with 50 Ohm RF/DC port connector impedance. This Pasternack male 2.92mm bias tee design is rated for a minimum frequency of 0.012 MHz and a maximum frequency of 40 GHz. Our RF coaxial bias tee has a 2.92mm DC port connector with a male gender. This 2.92mm bias tee / T is rated for a max. DC voltage of 16 Volts and a max. current of 150 mA. The PE1640 bias T with 2.92mm connector series for RF port is designed with a maximum VSWR of 2.5:1 and a RF to bias isolation typical of 50 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial 2.92mm bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts. The Pasternack's PE1640 bias tee, a three-port network, is used to adjust the DC bias point of some electrical components without affecting other components. The Pasternack's PE1640 broadband bias tee from Pasternack operates at temperature ranging from 15°C to 30°C. Our 2.92mm high-reliability bias tee is generally used to insert DC power into an AC signal to power remote antenna amplifiers or other devices. The PE1640 2.92mm bias tee has typical and maximum insertion loss of 1.5 dB and 3 dB respectively. Our coaxial broadband bias tee is just part of more than one million RF, microwave and millimeter wave components we carry in-stock. This bias tee with 2.92mm RF port is ready to buy and be shipped worldwide. For further information on similar products, our expert technical support and trained sales team can get you to the perfect bias tee as per your requirement.

1 : $3,390.0
5 : $3,254.4
10 : $3,118.8
25 : $2,983.2

PE1629

Pasternack Enterprises

Key Specifications, RF Port Connector Series: SMA, DC Port Connector Series: BNC, Minimum Frequency: 10 MHz, Maximum Frequency: 12 GHz, RF Port Maximum VSWR: 1.5:1, Maximum Voltage: 100 Volts, Maximum DC Current: 2,500 mA. 10 MHz to 12 GHz SMA Broadband Bias Tee, Male Input, Rated to 2.5 Amps and 100 Volts, DC BNC Connector. PE1629 bias tee (also called bias T) has a SMA connector RF port that is male gender. This broadband bias tee is available with 50 Ohm RF/DC port connector impedance. This Pasternack male SMA bias tee design is rated for a minimum frequency of 10 MHz and a maximum frequency of 12 GHz. Our RF coaxial bias tee has a SMA DC port connector with a male gender. This SMA bias tee / T is rated for a max. DC voltage of 100 Volts and a max. current of 2,500 mA. The PE1629 bias T with SMA connector series for RF port is designed with a maximum VSWR of 1.5:1 and a RF to bias isolation typical of 50 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial SMA bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts. The Pasternack's PE1629 bias tee, a three-port network, is used to adjust the DC bias point of some electrical components without affecting other components. The Pasternack's PE1629 broadband bias tee from Pasternack operates at temperature ranging from -55°C to 105°C. Our SMA high-reliability bias tee is generally used to insert DC power into an AC signal to power remote antenna amplifiers or other devices. The PE1629 SMA bias tee has typical and maximum insertion loss of 0.8 dB and 3 dB respectively. Our coaxial broadband bias tee is just part of more than one million RF, microwave and millimeter wave components we carry in-stock. This bias tee with SMA RF port is ready to buy and be shipped worldwide. For further information on similar products, our expert technical support and trained sales team can get you to the perfect bias tee as per your requirement.

1 : $1,380.0
5 : $1,324.8
10 : $1,269.6
25 : $1,214.4

PE1658

Pasternack Enterprises

Key Specifications, RF Port Connector Series: N, DC Port Connector Series: SMA, Minimum Frequency: 500 MHz, Maximum Frequency: 2 GHz, RF Port Maximum VSWR: 1.4:1, Maximum Voltage: 100 Volts, Maximum DC Current: 7,000 mA. 0.5 GHz to 2 GHz N Type High Current Bias Tee, Rated 7 Amps and 100 Volts, DC SMA Connector. PE1658 bias tee (also called bias T) has a type N connector RF port that is male gender. This broadband bias tee is available with 50 Ohm RF/DC port connector impedance. This Pasternack male type N bias tee design is rated for a minimum frequency of 500 MHz and a maximum frequency of 2 GHz. Our RF coaxial bias tee has a type N DC port connector with a male gender. This N type bias tee / T is rated for a max. DC voltage of 100 Volts and a max. current of 7,000 mA. The PE1658 bias T with type N connector series for RF port is designed with a maximum VSWR of 1.4:1 and a RF to bias isolation typical of 30 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial type N bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts. The Pasternack's PE1658 bias tee, a three-port network, is used to adjust the DC bias point of some electrical components without affecting other components. The Pasternack's PE1658 broadband bias tee from Pasternack operates at temperature ranging from -55°C to 105°C. Our type N high-reliability bias tee is generally used to insert DC power into an AC signal to power remote antenna amplifiers or other devices. The PE1658 type N bias tee has typical and maximum insertion loss of 0.2 dB and 0.5 dB respectively. Our coaxial broadband bias tee is just part of more than one million RF, microwave and millimeter wave components we carry in-stock. This bias tee with type N RF port is ready to buy and be shipped worldwide. For further information on similar products, our expert technical support and trained sales team can get you to the perfect bias tee as per your requirement.

1 : $1,260.0
5 : $1,209.6
10 : $1,159.2
25 : $1,108.8

PE1656

Pasternack Enterprises

Key Specifications, RF Port Connector Series: SMA, DC Port Connector Series: DC, Minimum Frequency: 1 GHz, Maximum Frequency: 6 GHz, RF Port Maximum VSWR: 1.5:1, Maximum Voltage: 100 Volts, Maximum DC Current: 7,000 mA. 1 GHz to 6 GHz SMA High Current Bias Tee, Rated 7 Amps and 100 Volts, DC Pin. PE1656 bias tee (also called bias T) has a SMA connector RF port that is male gender. This broadband bias tee is available with 50 Ohm RF/DC port connector impedance. This Pasternack male SMA bias tee design is rated for a minimum frequency of 1 GHz and a maximum frequency of 6 GHz. Our RF coaxial bias tee has a SMA DC port connector with a male gender. This SMA bias tee / T is rated for a max. DC voltage of 100 Volts and a max. current of 7,000 mA. The PE1656 bias T with SMA connector series for RF port is designed with a maximum VSWR of 1.5:1 and a RF to bias isolation typical of 25 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial SMA bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts. The Pasternack's PE1656 bias tee, a three-port network, is used to adjust the DC bias point of some electrical components without affecting other components. The Pasternack's PE1656 broadband bias tee from Pasternack operates at temperature ranging from -55°C to 105°C. Our SMA high-reliability bias tee is generally used to insert DC power into an AC signal to power remote antenna amplifiers or other devices. The PE1656 SMA bias tee has typical and maximum insertion loss of 0.5 dB and 1 dB respectively. Our coaxial broadband bias tee is just part of more than one million RF, microwave and millimeter wave components we carry in-stock. This bias tee with SMA RF port is ready to buy and be shipped worldwide. For further information on similar products, our expert technical support and trained sales team can get you to the perfect bias tee as per your requirement.

1 : $1,260.0
5 : $1,209.6
10 : $1,159.2
25 : $1,108.8

PE1657

Pasternack Enterprises

Key Specifications, RF Port Connector Series: N, DC Port Connector Series: DC, Minimum Frequency: 500 MHz, Maximum Frequency: 2 GHz, RF Port Maximum VSWR: 1.4:1, Maximum Voltage: 100 Volts, Maximum DC Current: 7,000 mA. 0.5 GHz to 2 GHz, N Type High Currnet Bias Tee, Rated 7 Amps and 100 Volts, DC Pin. PE1657 bias tee (also called bias T) has a type N connector RF port that is male gender. This broadband bias tee is available with 50 Ohm RF/DC port connector impedance. This Pasternack male type N bias tee design is rated for a minimum frequency of 500 MHz and a maximum frequency of 2 GHz. Our RF coaxial bias tee has a type N DC port connector with a male gender. This type N bias tee / T is rated for a max. DC voltage of 100 Volts and a max. current of 7,000 mA. The PE1657 bias T with type N connector series for RF port is designed with a maximum VSWR of 1.4:1 and a RF to bias isolation typical of 30 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial N type bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts. The Pasternack's PE1657 bias tee, a three-port network, is used to adjust the DC bias point of some electrical components without affecting other components. The Pasternack's PE1657 broadband bias tee from Pasternack operates at temperature ranging from -55°C to 105°C. Our N type high-reliability bias tee is generally used to insert DC power into an AC signal to power remote antenna amplifiers or other devices. The PE1657 N type bias tee has typical and maximum insertion loss of 0.2 dB and 0.5 dB respectively. Our coaxial broadband bias tee is just part of more than one million RF, microwave and millimeter wave components we carry in-stock. This bias tee with N type RF port is ready to buy and be shipped worldwide. For further information on similar products, our expert technical support and trained sales team can get you to the perfect bias tee as per your requirement.

1 : $1,260.0
5 : $1,209.6
10 : $1,159.2
25 : $1,108.8

PE1619

Pasternack Enterprises

Key Specifications, RF Port Connector Series: 1.85mm, DC Port Connector Series: SMA, Minimum Frequency: 0.03 MHz, Maximum Frequency: 70 GHz, RF Port Maximum VSWR: 2:1, Maximum Voltage: 25 Volts, Maximum DC Current: 500 mA. 0.03 MHz to 70 GHz 1.85mm Bias Tee Rated to 500 mA and 25 Volts DC. PE1619 bias tee (also called bias T) has an 1.85mm connector RF port that is female gender. This Pasternack female 1.85mm bias tee design is rated for a minimum frequency of 0.03 MHz and a maximum frequency of 70 GHz. Our RF coaxial bias tee has a sma DC port connector with a female gender. This 1.85mm bias tee / T is rated for a max. DC voltage of 25 Volts and a max. current of 500 mA. The PE1619 bias T with 1.85mm connector series for RF port is designed with a maximum VSWR of 2:1 and a RF to bias isolation minimum of 30 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial 1.85mm bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts.

1 : $2,800.0
5 : $2,744.0
10 : $2,688.0

PE1628

Pasternack Enterprises

Key Specifications, RF Port Connector Series: N, DC Port Connector Series: BNC, Minimum Frequency: 10 MHz, Maximum Frequency: 6 GHz, RF Port Maximum VSWR: 1.5:1, Maximum Voltage: 100 Volts, Maximum DC Current: 2,500 mA. 10 MHz to 6 GHz N Broadband Bias Tee, Male Output, Rated to 2.5 Amps and 100 Volts, DC BNC Connector. PE1628 bias tee (also called bias T) has a type N connector RF port that is female gender. This broadband bias tee is available with 50 Ohm RF/DC port connector impedance. This Pasternack female type N bias tee design is rated for a minimum frequency of 10 MHz and a maximum frequency of 6 GHz. Our RF coaxial bias tee has a type N DC port connector with a female gender. This type N bias tee / T is rated for a max. DC voltage of 100 Volts and a max. current of 2,500 mA. The PE1628 bias T with type N connector series for RF port is designed with a maximum VSWR of 1.5:1 and a RF to bias isolation typical of 40 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial N type bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts. The Pasternack's PE1628 bias tee, a three-port network, is used to adjust the DC bias point of some electrical components without affecting other components. The Pasternack's PE1628 broadband bias tee from Pasternack operates at temperature ranging from -55°C to 105°C. Our N type high-reliability bias tee is generally used to insert DC power into an AC signal to power remote antenna amplifiers or other devices. The PE1628 N type bias tee has typical and maximum insertion loss of 0.8 dB and 1.25 dB respectively. Our coaxial broadband bias tee is just part of more than one million RF, microwave and millimeter wave components we carry in-stock. This bias tee with type N RF port is ready to buy and be shipped worldwide. For further information on similar products, our expert technical support and trained sales team can get you to the perfect bias tee as per your requirement.

1 : $1,330.0
5 : $1,276.8
10 : $1,223.6
25 : $1,170.4

Sager

FLE-160-01-G-DV-A

Samtec Inc

Board to Board & Mezzanine Connectors Cost Effective Surface Mount Socket, 0.050 Pitch
RoHS : Compliant

1 : $15.51
10 : $14.85
25 : $13.97
50 : $13.13
100 : $11.78
250 : $9.98

6KPE16AH

Eaton Bussmann

ESD Suppressors / TVS Diodes AUTO TVS DIODE, 6KPE FAMILY, 16Vdc, Uni-

50,100 : $1.01

FLE-160-01-G-DV-P-TR

Samtec Inc

Board to Board & Mezzanine Connectors
RoHS : Compliant

EFDKA45J606E164DH

Eaton Bussmann

CAP EFDKA 450VDC 60UF J 4LEADS

210 : $9.38

EFDKA45K656E164DHT

Eaton Bussmann

CAP EFDKA-T 450VDC 65UF K 4LEADS 125C

210 : $7.81

EFDKA90K186E164DHT

Eaton Bussmann

CAP EFDKA-T 900VDC 18UF K 4LEADS 125C

210 : $5.14
280 : $5.0

EFDKS1AJ186E164DH

Eaton Bussmann

CAP EFDKS 1000VDC 18UF J 4LEADS

210 : $5.1
280 : $4.96

E16D12M

Panduit Corp

ES2P MI PDU, 30 (24) AMP, (16)5-20R, NEMA L5-30P 3W, BLACK

1 : $1,404.67
4 : $1,387.54

91PCE16G02B

Honeywell Sensing and Control / MICRO SWITCH

Limit Switches Industrial Limit Switches

10 : $136.39
20 : $132.9

CRE16R0TL0S

C&K Switches

Coded Rotary Switches

CRE16R0TL0SR

C&K Switches

Coded Rotary Switches

CRE16RRDM1S

C&K Switches

Coded Rotary Switches SWITCH DIP ROTARY
RoHS : Compliant

3,000 : $2.9

CRE16RRDM1SR

C&K Switches

Coded Rotary Switches 10 mm DIP Coded Rotary Switches
RoHS : Compliant

7,200 : $3.74

CLE-160-01-G-DV-A-P

Samtec Inc

Headers & Wire Housings 0.80 mm Tiger Beam Cost-effective Single Beam Socket Strip
RoHS : Compliant

1 : $23.16
10 : $21.93
25 : $21.1
50 : $20.59
100 : $14.91
250 : $13.02

CLE-160-01-G-DV-TR

Samtec Inc

Headers & Wire Housings
RoHS : Compliant

TE Connectivity

RP73PF1E162KBTD

TE Connectivity

RP 1E 0.1W 162K 0.1% 25PPM 5K RL Resistance Value: 162K Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 162K Ω Thin Film Precision Resistor .1 % | Part Number: RP73PF1E162KBTD | Internal Number: 2176308-9 | TE Connectivity
RoHS : Compliant

2,500 : $0.21
1,000 : $0.22
500 : $0.23
250 : $0.23
100 : $0.24
50 : $0.24
25 : $0.25
10 : $0.26
1 : $0.26

70,159

RP73PF1E169KBTD

TE Connectivity

RP 1E 0.1W 169K 0.1% 25PPM 5K RL Resistance Value: 169K Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 169K Ω Thin Film Precision Resistor .1 % | Part Number: RP73PF1E169KBTD | Internal Number: 1-2176308-1 | TE Connectivity
RoHS : Compliant

2,500 : $0.21
1,000 : $0.22
500 : $0.23
250 : $0.23
100 : $0.24
50 : $0.24
25 : $0.25
10 : $0.26
1 : $0.26

60,580

RQ73C1E162RBTD

TE Connectivity

RQ 0402 162R 0.1% 10PPM 5K RL Resistance Value: 162 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 162 Ω Thin Film Precision Resistor .1 % | Part Number: RQ73C1E162RBTD | Internal Number: 5-2176362-9 | TE Connectivity
RoHS : Compliant

2,500 : $0.73
1,000 : $0.75
500 : $0.77
250 : $0.79
100 : $0.81
50 : $0.83
25 : $0.85
10 : $0.87
1 : $0.89

19,188

RQ73C1E169RBTD

TE Connectivity

RQ 0402 169R 0.1% 10PPM 5K RL Resistance Value: 169 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 169 Ω Thin Film Precision Resistor .1 % | Part Number: RQ73C1E169RBTD | Internal Number: 6-2176362-1 | TE Connectivity
RoHS : Compliant

2,500 : $0.73
1,000 : $0.75
500 : $0.77
250 : $0.79
100 : $0.81
50 : $0.83
25 : $0.85
10 : $0.87
1 : $0.89

13,194

RQ73C1E16K9BTD

TE Connectivity

RQ 0402 16K9 0.1% 10PPM 5K RL Resistance Value: 16.9K Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 16.9K Ω Thin Film Precision Resistor .1 % | Part Number: RQ73C1E16K9BTD | Internal Number: 5-2176364-5 | TE Connectivity
RoHS : Compliant

2,500 : $0.73
1,000 : $0.75
500 : $0.77
250 : $0.79
100 : $0.81
50 : $0.83
25 : $0.85
10 : $0.87
1 : $0.89

7,066

RP73PF1E165RBTD

TE Connectivity

RP 1E 0.1W 165R 0.1% 25PPM 5K RL Resistance Value: 165 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 165 Ω Thin Film Precision Resistor .1 % | Part Number: RP73PF1E165RBTD | Internal Number: 1-2176305-9 | TE Connectivity
RoHS : Compliant

2,500 : $0.21
1,000 : $0.22
500 : $0.23
250 : $0.23
100 : $0.24
50 : $0.24
25 : $0.25
10 : $0.26
1 : $0.26

3,116

DT06-2S-EE16

TE Connectivity

PLG, 2P, GRN, E, CAP Nominal Voltage Architecture: 48 V 12 V 24 V Number of Positions: 2 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 1.59 mm Deutsch Dt Color Connector | 48 V 2 | Part Number: DT06-2S-EE16 | Internal Number: 3-2448100-2 | 1.59 mm | TE Connectivity
RoHS : Compliant

1 : $1.56

2,994

RP73PF1E16K2BTD

TE Connectivity

RP 1E 0.1W 16K2 0.1% 25PPM 5K RL Resistance Value: 16.2K Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 16.2K Ω Thin Film Precision Resistor .1 % | Part Number: RP73PF1E16K2BTD | Internal Number: 1-2176307-2 | TE Connectivity
RoHS : Compliant

2,500 : $0.21
1,000 : $0.22
500 : $0.23
250 : $0.23
100 : $0.24
50 : $0.24
25 : $0.25
10 : $0.26
1 : $0.26

135

AVH22LSSFE16241604

TE Connectivity

AVH22 FLT SS LK R+P GRN 24V16A Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: On On 1 NO & 1 NC Configuration (Pole-Throw): Single Pole - Double Throw Number of Actuators: Single Anti-Vandal Switch With On On Single Pole - Double Throw | Pushbutton Switch | Part Number: AVH22LSSFE16241604 | Internal Number: 1-2364688-6 | TE Connectivity
RoHS : Compliant

50 : $49.73
25 : $52.65
10 : $55.58
1 : $58.5

AVH19MSFE16122604

TE Connectivity

AVH19 FLT SS MT R+P GRN 12V26A Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: 1 NO & 1 NC Momentary Configuration (Pole-Throw): Single Pole - Double Throw Number of Actuators: Single Anti-Vandal Switch With 1 & 1 NC Single Pole - Double Throw | Pushbutton Switch | Part Number: AVH19MSFE16122604 | Internal Number: 1-2364573-3 | TE Connectivity
RoHS : Compliant

50 : $55.5
25 : $58.76
10 : $62.03
1 : $65.29

AVH25MSSFE16242604

TE Connectivity

AVH25 FLT SS MT R+P GRN 24V26A Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: 1 NO & 1 NC Momentary Configuration (Pole-Throw): Single Pole - Double Throw Number of Actuators: Single Anti-Vandal Switch With 1 & 1 NC Single Pole - Double Throw | Pushbutton Switch | Part Number: AVH25MSSFE16242604 | Internal Number: 1-2364703-5 | TE Connectivity
RoHS : Compliant

50 : $69.99
25 : $74.11
10 : $78.23
1 : $82.34

AVH25LSSFE16122604

TE Connectivity

AVH25 FLT SS LK R+P GRN 12V26A Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: 1 NO & 1 NC On On Configuration (Pole-Throw): Single Pole - Double Throw Number of Actuators: Single Anti-Vandal Switch With 1 & 1 NC Single Pole - Double Throw | Pushbutton Switch | Part Number: AVH25LSSFE16122604 | Internal Number: 1-2364703-4 | TE Connectivity
RoHS : Compliant

50 : $69.99
25 : $74.11
10 : $78.23
1 : $82.34

AVH25MSSFE16241604

TE Connectivity

AVH25 FLT SS MT R+P GRN 24V16A Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: 1 NO & 1 NC Momentary Configuration (Pole-Throw): Single Pole - Double Throw Number of Actuators: Single Anti-Vandal Switch With 1 & 1 NC Single Pole - Double Throw | Pushbutton Switch | Part Number: AVH25MSSFE16241604 | Internal Number: 1-2364702-5 | TE Connectivity
RoHS : Compliant

50 : $57.18
25 : $60.55
10 : $63.91
1 : $67.27

AVH22MSSFE16121604

TE Connectivity

AVH22 FLT SS MT R+P GRN 12V16A Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: 1 NO & 1 NC Momentary Configuration (Pole-Throw): Single Pole - Double Throw Number of Actuators: Single Anti-Vandal Switch With 1 & 1 NC Single Pole - Double Throw | Pushbutton Switch | Part Number: AVH22MSSFE16121604 | Internal Number: 1-2364688-3 | TE Connectivity
RoHS : Compliant

50 : $49.73
25 : $52.65
10 : $55.58
1 : $58.5

AVH19MSFE16121604

TE Connectivity

AVH19 FLT SS MT R+P GRN 12V16A Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: 1 NO & 1 NC Momentary Configuration (Pole-Throw): Single Pole - Double Throw Number of Actuators: Single Anti-Vandal Switch With 1 & 1 NC Single Pole - Double Throw | Pushbutton Switch | Part Number: AVH19MSFE16121604 | Internal Number: 1-2364572-3 | TE Connectivity
RoHS : Compliant

50 : $44.05
25 : $46.64
10 : $49.23
1 : $51.82