 |
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
|
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
D300-2920-R Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
 Avnet Americas | MCS0402MD3003BE000 | Vishay Intertechnologies | SMD Chip Resistor, 300 kohm, ? 0.1%, 100 mW, 0402 [1005 Metric], Thin Film - Tape and Reel (Alt: MCS0402MD3003BE000) RoHS : Compliant |
| 40,000 | |
| VJ1111D300FXRQT | Vishay Intertechnologies | SMD Multilayer Ceramic Capacitor, 30 pF, 1.5 kV, 1111 [2828 Metric], ? 1%, C0G / NP0 - Tape and Reel (Alt: VJ1111D300FXRQT) RoHS : Compliant |
| 5,000 | ||
| RN60D3002FB14 | Vishay Intertechnologies | - Bulk (Alt: RN60D3002FB14) RoHS : Not Compliant |
| 1,000 | ||
| RN55D3001FRE6 | Vishay Intertechnologies | - Tape and Reel (Alt: RN55D3001FRE6) RoHS : Not Compliant |
| 1,000 | ||
| RN60D3000FB14 | Vishay Intertechnologies | - Bulk (Alt: RN60D3000FB14) RoHS : Not Compliant |
| 1,000 | ||
| ZW-16-15-H-D-300-100 | Samtec Inc | - Bulk (Alt: ZW-16-15-H-D-300-100) RoHS : Compliant |
| 602 | ||
| HW-20-09-H-D-300-185 | Samtec Inc | - Bulk (Alt: HW-20-09-H-D-300-185) RoHS : Compliant |
| 222 | ||
| HW-25-09-H-D-300-185 | Samtec Inc | - Bulk (Alt: HW-25-09-H-D-300-185) RoHS : Compliant |
| 183 | ||
| 2ED300C17STROHSBPSA1 | Infineon Technologies AG | Development Board, EiceDriver Safe IGBT Gate Driver, 2-Channel, Half Bridge - Trays (Alt: 2ED300C17STROHSBPSA1) RoHS : Compliant |
| 120 | ||
| TW-25-06-H-D-300-140 | Samtec Inc | - Bulk (Alt: TW-25-06-H-D-300-140) RoHS : Compliant |
| 47 | ||
| D-300-01 | TE Connectivity | - Boxed Product (Development Kits) (Alt: 610004-000) RoHS : Compliant |
| 45 | ||
| HW-14-09-S-D-300-SM | Samtec Inc | - Rail/Tube (Alt: HW-14-09-S-D-300-SM) RoHS : Compliant |
| 14 | ||
| TW-20-10-H-D-300-155 | Samtec Inc | - Bulk (Alt: TW-20-10-H-D-300-155) RoHS : Compliant |
| 12 | ||
| DW-14-09-H-D-300 | Samtec Inc | - Bulk (Alt: DW-14-09-H-D-300) RoHS : Compliant |
| 7 | ||
| 9123-C7D3-002 | Esterline Power Systems | Contactor 3PST-NO 115VAC 3-Pole - Bulk (Alt: 9123-C7D3-002) RoHS : Not Compliant |
| 2 | ||
 Newark | RK73H1JTTD3002F | KOA Speer Electronics Inc | Res, 30K, 1%, 0.1W, 0603, Thick Film; |Koa RK73H1JTTD3002F RoHS : Compliant |
| 203,702 | |
| RK73H1JTTD3002F | KOA Speer Electronics Inc | Res, 30K, 1%, 0.1W, 0603, Thick Film; |Koa RK73H1JTTD3002F RoHS : Compliant |
| 203,702 | ||
| MTSW-103-08-G-D-300 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 6Pos; |Samtec, Inc. MTSW-103-08-G-D-300 RoHS : Compliant |
| 2,197 | ||
| MTMM-103-14-G-D-300 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 6Pos; |Samtec, Inc. MTMM-103-14-G-D-300 RoHS : Compliant |
| 1,236 | ||
| MTMM-104-07-S-D-300 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 8Pos; |Samtec, Inc. MTMM-104-07-S-D-300 RoHS : Compliant |
| 967 | ||
| MTMM-105-07-G-D-300 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 10Pos; |Samtec, Inc. MTMM-105-07-G-D-300 RoHS : Compliant |
| 823 | ||
| MTMM-105-08-T-D-300 | Samtec Inc | Pin Header, Mtmm-105-08-T-D-300; |Samtec, Inc. MTMM-105-08-T-D-300 RoHS : Compliant |
| 823 | ||
| HW-05-09-L-D-300-333 | Samtec Inc | Conn Stack Brd, 2.54Mm, 10Pos, Hdr; |Samtec, Inc. HW-05-09-L-D-300-333 RoHS : Compliant |
| 674 | ||
| MTMM-107-05-S-D-300 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 14Pos; |Samtec, Inc. MTMM-107-05-S-D-300 RoHS : Compliant |
| 595 | ||
SMD300F/15-2 | Littelfuse Inc | Fuse, Resettable Ptc, 15Vdc, 3A, Smd; |Littelfuse SMD300F/15-2 RoHS : Compliant |
| 591 | ||
| MTSW-116-08-G-D-300 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 32Pos; |Samtec, Inc. MTSW-116-08-G-D-300 RoHS : Compliant |
| 533 | ||
| MTLW-107-24-G-D-300 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 14Pos; |Samtec, Inc. MTLW-107-24-G-D-300 RoHS : Compliant |
| 491 | ||
| HW-15-15-G-D-300-SM | Samtec Inc | Conn Stack Brd, 2.54Mm, 30Pos, Hdr; |Samtec, Inc. HW-15-15-G-D-300-SM RoHS : Compliant |
| 100 | ||
| HDWM-20-57-S-D-300 | Samtec Inc | ".050" X .100" Flex Stack; |Samtec, Inc. HDWM-20-57-S-D-300 RoHS : Compliant |
| 76 | ||
| LDD-300LW | Mean Well | Dc-Dc Converter, Analog/Pwm, 9.6W, Panel; |Mean Well LDD-300LW RoHS : Compliant |
| 48 | ||
 RS | RN55D3002FB14 | Vishay Dale | RESISTOR, METAL FILM,30 KILOOHMS,0.125 W,+/-1%,200 V, AXIAL,100 PPM/C,450 VAC RoHS : Not Compliant |
| 4,484 | |
| RN60D3002FB14 | Vishay Dale | RESISTOR, METAL FILM,30 KILOOHMS,0.25 W,+/-1%,300 V, AXIAL,100 PPM/C,500 VAC RoHS : Unknown |
| 1,900 | ||
| FLLD3007AMHT3 (LLD3007AMHT3) | KEMET Corporation | 3-PHASE EMC FILTER CHASSIS MOUNT 530/305VAC 7A TERMINAL BLOCK |
| 60 | ||
| ISR3SAD300 | APEM Inc | SWITCH, P/B, SEALED, SPST-NO, OFF-MOM, NON-ILLUM, ROUND, GREEN ACT,0.4A,32VAC, SOLDER RoHS : Compliant |
| 58 | ||
| V2D1S00B-BZCAD-300 (RCV-00106940 | V2D1S00B-BZCAD-300 | V2D1S00BBZCAD300) | Carling Technologies | ROCKER SWITCH, SEALED, CONTURA, V-SERIES |
| 24 | ||
| IN5327 (IND3004DBPKG/US-100-DPV) | ifm efector inc | INDUCTIVE SENSOR, 4MM NONFLUSH RANGE, 3WIRE DC PNP, 2 XN.O, M12 QD |
| 5 | ||
| RSD-300C-12 | Mean Well | DC-DC CONVERTER,12V,25A,33.6-62.4V IN, ENCLOSED, PANEL MOUNT, RSD SERIES RoHS : Compliant |
| 3 | ||
| ZX1-LD300A61 5M (ZX1LD300A615M) | OMRON Industrial Automation | 300MM NPN 5M CABLE |
| 2 | ||
| D300199 | Mersen Electrical Power | FUSE, SQUARE BODY, FAST ACTING, SIZE 32, AR, TYPE KI BLADES, 200KA, 690VAC, 630A RoHS : Compliant |
| 1 | ||
| 0JTD300.XXID | Littelfuse Inc | FUSE, TIME-DELAY, CLASS J, 600V AC/500V DC, 300A, IND., JTD_ID SERIES |
| 1 | ||
| A4D300-AT04-01 | ebm-papst | FAN, AXIAL,230/400VAC,1200CFM,90W,0.29A,1530RPM, DIA,300X84.5MM, BB |
| 1 | ||
| NJ-PD3001 (NJPD3001) | OMRON Industrial Automation | POWER SUPPLY, AC-DC, SYSMAC NJ POWER SUPPLY DC, NJ-PA SERIES |
| 1 | ||
| D300 | Gates | V-BELT, D SECTION, SINGLE SECTION, HI-POWER II SERIES |
| 0 | ||
| D300 | OPTIBELT GmbH | OPTIBELT VB, D' BELT SECTION, 1-1/4" WIDTH, 305" OUTSIDE LENGTH |
| 0 | ||
| D300 | Goodyear Belts | CLASSICAL V-BELT, 1 BAND, D' SECTION |
| 0 | ||
 Microchip Technology Inc | MD-300-YDE-OCXO-10M0000000 | Microchip Technology Inc | MD-300-YDE-OCXO-10M0000000, Projected EOL: 2050-12-05 - Contact for Pricing | 0 | ||
| MD-300-WDE-TCXO-10M0000000 | Microchip Technology Inc | MD-300-WDE-TCXO-10M0000000, Projected EOL: 2050-12-05 - Contact for Pricing | 0 | |||
 Bisco Industries | D-300-01 | TE Connectivity | RoHS : Compliant | 390 | ||
| D3005 | Stimpson Company | 50 | ||||
| D3005 STEEL NICKEL | Stimpson Company | 33 | ||||
| EW-08-09-G-D-300 | Samtec Inc | RoHS : Compliant | 11 | |||
| HMTSW-110-08-G-D-300 | Samtec Inc | RoHS : Compliant | 10 | |||
| M1503-D-3005-B-16 | RAF Electronic Hardware | 9 | ||||
| M1522-D-3005-B-16 | RAF Electronic Hardware | 5 | ||||
| SHD3003 | MISC. FITTINGS/ELBOWS | 2 | ||||
| AK24D300-SOIC | MISC. INDUSTRIAL CONNECTORS | 2 | ||||
 Rochester Electronics | MC33GD3000EPR2 | NXP Semiconductors | Motor Driver ICs Controller - Commutation, Direction Management 2.5A 56-QFN T/R RoHS : Compliant |
| 1,520 | |
| A2T09VD300NR1 | NXP Semiconductors | RF MOSFET LDMOS 105V 960MHz 1.2A 6L-FLG T/R RoHS : Compliant |
| 2,500 | ||
| MC34GD3000EPR2 | NXP Semiconductors | Motor Driver ICs Controller - Current Management 2.5A 56-QFN T/R RoHS : Compliant |
| 45,950 | ||
| MC34GD3000EP | NXP Semiconductors | Motor Driver ICs Controller - Current Management 2.5A 56-QFN Tray RoHS : Compliant |
| 188 | ||
PMD3001D,115 | Nexperia | Special Purpose Transistor NPN, PNP 1A 40V SOT-23-6 T/R RoHS : Compliant |
| 15,339 | ||
| NCP140AMXD300TCG | onsemi | IC VOLT REG Fixed 1 REG 3V 150mA 4-SON T/R RoHS : Compliant |
| 654,601 | ||
FD300R06KE3HOSA1 | Infineon Technologies AG | IGBT MOD 600V 400A 940W Tray RoHS : Compliant |
| 229 | ||
| FD300R12KS4HOSA1 | Infineon Technologies AG | IGBT MOD 1.2kV 370A 1.95kW Module Tray RoHS : Compliant |
| 556 | ||
| FD300R07PE4B6BOSA1 | Infineon Technologies AG | IGBT MOD 650V 300A 940W Tray RoHS : Compliant |
| 222 | ||
| FD300R17KE4HPSA1 | Infineon Technologies AG | IGBT MOD 1.7kV 300A Tray RoHS : Compliant |
| 50 | ||
| FD300R12KE3HOSA1 | Infineon Technologies AG | IGBT MOD 1.2kV 480A 1.47kW Module Tray RoHS : Compliant |
| 5 | ||
| FD300R12KS4B5HOSA1 | Infineon Technologies AG | IGBT MOD 1.2kV 370A 1.95kW Tray RoHS : Compliant |
| 683 | ||
| FD300R17KE4PHOSA1 | Infineon Technologies AG | IGBT MOD 1.7kV 300A Module Tray RoHS : Compliant |
| 24 | ||
| FOD817D300 | Fairchild Semiconductor Corporation | Opto-coupler 5kVrms Transistor 4-DIP Box RoHS : Compliant |
| 6,573 | ||
| BMD-300-A-R-10 | u-blox AG | Stand-alone Bluetooth low energy module RoHS : Compliant |
| 4,970 | ||
 Sager | MTMM-103-14-G-D-300 | Samtec Inc | Headers & Wire Housings Variable Post Height Header Strips, 2.00 mm Pitch RoHS : Compliant |
| 1,236 | |
| MTMM-105-07-G-D-300 | Samtec Inc | Headers & Wire Housings Variable Post Height Header Strips, 2.00 mm Pitch RoHS : Compliant |
| 823 | ||
| MTMM-105-08-T-D-300 | Samtec Inc | Headers & Wire Housings Variable Post Height Header Strips, 2.00 mm Pitch RoHS : Compliant |
| 823 | ||
| MTMM-107-05-S-D-300 | Samtec Inc | Headers & Wire Housings Variable Post Height Header Strips, 2.00 mm Pitch RoHS : Compliant |
| 595 | ||
| MTLW-107-24-G-D-300 | Samtec Inc | Headers & Wire Housings .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 491 | ||
| 56BD30-01-1-AJN | Grayhill Inc | Rotary Switches ElectricalSwitch Rotary NotOver5Amp RoHS : Compliant |
| 0 | ||
| 44D30-03-3-AJS | Grayhill Inc | Rotary Switches Rotary Switch, Standard, adjustable stops, 30°, 3 deck, 3 pole/deck, shorting RoHS : Compliant | 0 | |||
| 44D30-07-2-AJN | Grayhill Inc | Rotary Switches Rotary Switch, Standard, adjustable stops, 30°, 7 deck, 2 pole/deck, non-shorting RoHS : Compliant | 0 | |||
| ASD300-2 | IDEC Corporation | Switch Actuators Operator |
| 0 | ||
| MTMM-104-07-F-D-300 | Samtec Inc | Headers & Wire Housings Variable Post Height Header Strips, 2.00 mm Pitch RoHS : Compliant |
| 0 | ||
| ZLTMM-105-02-G-D-300 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| ZLTMM-105-62-S-D-300 | Samtec Inc | Headers & Wire Housings 2.00 mm Shrouded Variable Stack Height Terminal Strip RoHS : Compliant |
| 0 | ||
| ZLTMM-115-73-L-D-300 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| ZLTMM-118-62-S-D-300 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| WHA-D-300 | Eaton Bussmann | Specialty Fuses BUSS OPEN LINK FUSE | 0 | |||
 TME | UALSN8D300JB00 | YAGEO Corporation | Inductor: wire; THT; 45uH; 2A; R: 70mΩ; 18.5x15.5x18mm; Pitch: 14mm |
| 182 | |
| TSZSWD 30/004M | Intel Corporation | Transformer: mains; 30VA; 230VAC; 14V; 2.14A; Leads: terminal block |
| 8 | ||
| TSZZBD 30/004M | Intel Corporation | Transformer: mains; 30VA; 230VAC; 14V; 2.14A; Leads: terminal block |
| 3 | ||
| TC0610D3001T5J | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thin film; 3kΩ; SMD; 1206; 250mW; ±0.5%; TC; 200V; 10ppm/°C |
| 0 | ||
| TC0550D3002T5F | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thin film; 30kΩ; SMD; 0805; 125mW; ±0.5%; TC; 150V |
| 0 | ||
| TFR0805BFD3003NR | Littelfuse Inc | Resistor: thin film; 300kΩ; precise; SMD; 0805; 125mW; ±0.1%; TFR |
| 0 | ||
| TFR0805BHD3001NR | Littelfuse Inc | Resistor: thin film; 3kΩ; precise; SMD; 0805; 125mW; ±0.1%; TFR |
| 0 | ||
| TFR0805AFD3000NR | Littelfuse Inc | Resistor: thin film; 300Ω; precise; SMD; 0805; 125mW; ±0.05%; TFR |
| 0 | ||
| TFR0805EHD3001NR | Littelfuse Inc | Resistor: thin film; 3kΩ; precise; SMD; 0805; 125mW; ±0.01%; TFR |
| 0 | ||
| VS-SD300C28C | Vishay Intertechnologies | Diode: hockey-puck rectifying; 2.8kV; 540A; 995A; A-PUK,DO200AA RoHS : Compliant |
| 0 | ||
| WDD30-05D2U | Chinfa Electronics Ind Co Ltd | Converter: DC/DC; 25W; Uin: 18÷36VDC; Uout: 5VDC; Uout2: -5VDC; OUT: 2 |
| 0 | ||
| VS-SD3000C10K | Vishay Intertechnologies | Diode: hockey-puck rectifying; 1kV; 3.8kA; 6230A; DO200AC,K-PUK RoHS : Compliant |
| 0 | ||
| WDD30-05S1U | Chinfa Electronics Ind Co Ltd | Converter: DC/DC; 25W; Uin: 9÷18VDC; Uout: 5VDC; Iout: 5A; WDD30U |
| 0 | ||
| TFR0805BFD3000NR | Littelfuse Inc | Resistor: thin film; 300Ω; precise; SMD; 0805; 125mW; ±0.1%; TFR |
| 0 | ||
| XL3D-300/5A-0.2 | TE Connectivity | Transformer: current; Iin: 300A; Iout: 5A; 0.2@max1.5VA; Øint: 31mm |
| 0 | ||
 Ameya Holding Limited | MCR006YLPD3002 | ROHM Semiconductor | 方形贴片电阻器 (MCR系列) <车载品 *对应AEC-Q200> RoHS : Compliant |
| 15,000 | |
| ESR10EZPD3001 | ROHM Semiconductor | Anti-surge Chip Resistors RoHS : Compliant |
| 10,000 | ||
| ESR18EZPD3001 | ROHM Semiconductor | Anti-surge Chip Resistors RoHS : Compliant |
| 10,000 | ||
| ESR10EZPD3003 | ROHM Semiconductor | Anti-surge Chip Resistors RoHS : Compliant |
| 10,000 | ||
| ESR10EZPD3000 | ROHM Semiconductor | Anti-surge Chip Resistors RoHS : Compliant |
| 10,000 | ||
| ESR03EZPD3002 | ROHM Semiconductor | Anti-surge Chip Resistors RoHS : Compliant |
| 10,000 | ||
| SDR10EZPD3002 | ROHM Semiconductor | 抗浪涌贴片电阻器 RoHS : Compliant |
| 10,000 | ||
| SDR10EZPD3001 | ROHM Semiconductor | 抗浪涌贴片电阻器 RoHS : Compliant |
| 10,000 | ||
| SDR03EZPD3002 | ROHM Semiconductor | 抗浪涌贴片电阻器 RoHS : Compliant |
| 10,000 | ||
| BD9D300MUV-E2 | ROHM Semiconductor | 4.0V～17V 3A 内置MOSFET 1ch同步整流降压DC/DC转换器 RoHS : Compliant |
| 6,300 | ||
| SDR03EZPD3003 | ROHM Semiconductor | 抗浪涌贴片电阻器 RoHS : Compliant |
| 5,000 | ||
| SDR03EZPD3001 | ROHM Semiconductor | 抗浪涌贴片电阻器 RoHS : Compliant |
| 5,000 | ||
| ZXGD3009E6TA | Diodes Incorporated | SOT26/40V 2A GATE DRIVER RoHS : Compliant | 2,011 | |||
| DHVSD3004S3-7 | Diodes Incorporated | RoHS : Compliant | 1,313 | |||
| BD9D300MUV-EVK-001 | ROHM Semiconductor |
| 2 | |||
 ComSIT USA | NHSW146ATB00CD300CD360CD430 | ITO-ELEC | AVAILABLE EU | 16,268 | ||
| RK73H2BTTD3001F | KOA Speer Electronics Inc | AVAILABLE EU RoHS : Compliant | 375,000 | |||
| WK73R2BTTD3001F | KOA Speer Electronics Inc | AVAILABLE EU RoHS : Compliant | 393,750 | |||
ComSIT USA | VC120614D300RP | Kyocera AVX Components | MULTILAYER CERAMIC TRANSIENT VOLTAGE SUPPRESSOR Varistor, 0.4J, Surface Mount RoHS : Compliant | 44,000 | ||
| RK73H1JTTD3002F | KOA Speer Electronics Inc | THICK FILM CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.1W, 30000ohm, 75V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0603 RoHS : Not Compliant | 20,000 | |||
| BLM15PD300SN1D | Murata Manufacturing Co Ltd | CHIP FERRITE BEAD Ferrite Chip, 1 Function(s), 1.4A, 2 Pin(s) RoHS : Compliant | 20,000 | |||
| MMBD3004CCRF | TSC Electronics Ltd | 225 MILLIAMPERE, 350 VOLT SMD SWITCHING DIODE Rectifier Diode, 2 Element, 0.225A, 350V V(RRM), Silicon RoHS : Compliant | 12,000 | |||
| SMM02040D3009BB300 | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.25W, 30ohm, 200V, 0.1% +/-Tol, 25ppm/Cel, Surface Mount, 1406 RoHS : Compliant | 9,000 | |||
| CMLD3003DOGTR | Central Semiconductor Corp | Rectifier Diode, 2 Element, 0.2A, 180V V(RRM), Silicon RoHS : Compliant | 6,000 | |||
| SG73P2BTTD300J | KOA Speer Electronics Inc | Fixed Resistor, Metal Glaze/thick Film, 0.75W, 30ohm, 200V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 5,000 | |||
| SMM02040D3003BB300 | Vishay Intertechnologies | THIN FILM MINI- MELF RESISTOR Fixed Resistor, Thin Film, 0.25W, 300000ohm, 200V, 0.1% +/-Tol, 25ppm/Cel, Surface Mount, 1406 RoHS : Compliant | 3,000 | |||
| CMPD3003TR | Central Semiconductor Corp | LOW LEAKAGE SINGLE DIODE IN A SOT-23 Rectifier Diode, 1 Phase, 1 Element, 0.6A, 200V V(RRM), Silicon RoHS : Compliant | 2,045 | |||
| FOD817D300W | Fairchild Semiconductor Corporation | Phototransistor Optocoupler Transistor Output Optocoupler, 1-Element, 5000V Isolation RoHS : Compliant | 2,000 | |||
ZXGD3005E6TA | Diodes Incorporated | Buffer or Inverter Based IGBT/MOSFET Driver, 4A, PDSO6 RoHS : Compliant | 535 | |||
| ISR3SAD300 | APEM Inc | SEALED PUSHBUTTON SWITCH Pushbutton Switch, SPST, Momentary, 0.1A, 48VDC, Solder Terminal, Panel Mount-threaded RoHS : Compliant | 89 | |||
| 2SD300C17A1 | Concept Green Energy Solutions Inc | DUAL-CHANNEL HIGH-QUALITY AND SCALE -2 DRIVER CORE Analog Circuit RoHS : Not Compliant | 34 | |||
| D3003 | Intel Corporation | Electronic Component RoHS : Not Compliant | 14 | |||
| D3002 | Intel Corporation | Bit-Slice Processor, MOS, CDIP28 RoHS : Not Compliant | 1 | |||
 Interstate Connecting Components | ISR3SAD300 | APEM Inc | RoHS : Compliant |
| 74 | |
| D-300-03CS1108 | TE Connectivity |
| 0 | |||
| JT00C-12-3PD(300) | Amphenol Aerospace | RECEPT 72-269062-03Y | 0 | |||
| JT06A-12-98PD(300) | Amphenol Aerospace | PLUG 72-287612-98Y | 0 | |||
| JT07A-18-28PD(300) | Amphenol Aerospace | RECEPT 72-287718-28Y | 0 | |||
| JT07C-10-5SD(300) | Amphenol Aerospace | RECEPT 72-269760-05Z | 0 | |||
| JT00C-18-30SD(300) | Amphenol Aerospace | RECEPT 72-269068-30Z | 0 | |||
| JT06A-22-55SD(300) | Amphenol Aerospace | PLUG 72-287622-55Z | 0 | |||
| JT07A-12-8SD(300) | Amphenol Aerospace | RECEPT 72-287712-08Z | 0 | |||
| JT07A-16-55SD(300) | Amphenol Aerospace | RECEPT 72-287716-55Z | 0 | |||
| JT07A-18-66SD(300) | Amphenol Aerospace | RECEPT 72-287718-66Z | 0 | |||
| JT07A-20-41SD(300) | Amphenol Aerospace | RECEPT 72-287720-41Z | 0 | |||
| JT07C-18-66SD(300) | Amphenol Aerospace | RECEPT 72-269768-66Z | 0 | |||
| JT07C-20-41SD(300) | Amphenol Aerospace | RECEPT 72-269770-41Z | 0 | |||
| JT00A-18-30SD(300) | Amphenol Aerospace | RECEPT 72-287018-30Z | 0 | |||
 PEI Genesis | LMD-3003-S | Amphenol Corporation |
| 0 | ||
| LMD-3003-P | Amphenol Corporation |
| 0 | |||
| LMD-3001-P | Amphenol Corporation |
| 0 | |||
| D300UB20 | Amphenol Alden Products Company |
| 0 | |||
| D300FY72 | Amphenol Alden Products Company |
| 0 | |||
| LMD-3001-S | Amphenol Corporation | RoHS : Compliant |
| 0 | ||
| LMD-3004-S | Amphenol Corporation |
| 0 | |||
| LMD-3005-S | Amphenol Corporation |
| 0 | |||
| LMD-3004-P | Amphenol Corporation |
| 0 | |||
 Powell Electronics | MTSW-103-08-G-D-300 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 1,450 | |
| MTMM-103-14-G-D-300 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 816 | ||
| MTMM-104-07-S-D-300 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 638 | ||
| MTMM-105-07-G-D-300 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 543 | ||
| MTMM-105-08-T-D-300 | Samtec Inc | Connector Header RoHS : Compliant |
| 543 | ||
| HW-05-09-L-D-300-333 | Samtec Inc | High Temperature Flexible Board Stacking RoHS : Compliant |
| 445 | ||
| MTMM-107-05-S-D-300 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 393 | ||
| MTSW-116-08-G-D-300 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 352 | ||
| MTLW-107-24-G-D-300 | Samtec Inc | .100" Low Profile Variable Post Height T RoHS : Compliant |
| 324 | ||
| MTSW-125-22-G-D-300 | Samtec Inc | .100 Variable Post Height Terminal Strip RoHS : Compliant |
| 244 | ||
| MTSW-103-09-L-D-300-RA | Samtec Inc | PCB Header, 2.54mm Pitch, SMT, Male, Wid RoHS : Compliant |
| 215 | ||
| HW-15-15-G-D-300-SM | Samtec Inc | High Temperature Flexible Board Stacking RoHS : Compliant |
| 66 | ||
| HDWM-20-57-S-D-300 | Samtec Inc | .050" X .100" Flex Stack, High-Temp Micr RoHS : Compliant |
| 50 | ||
| ZW-26-09-G-D-300-330 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 50 | ||
| FW-04-05-L-D-300-200 | Samtec Inc | Cable Assembly, Wire-to-Board, Female RoHS : Compliant |
| 46 | ||
 Richardson RFPD | CRD300DA12E-XM3 | Wolfspeed | Gate and Power Driver Development Tool RoHS : Compliant |
| 1 | |
| RMOD300-80-12.2SUW/CTRL/MO | RECOM Power GmbH | Module DC-DC 1-OUT 12.2V 24A 300W Box RoHS : Compliant |
| 0 | ||
| E6D30065A | Wolfspeed | Diode Schottky SiC 650V 92.5A 2-Pin(2+Tab) TO-220 RoHS : Compliant | 0 | |||
| CP0603D3000AWTR | Kyocera AVX Components | THIN-FILM DIRECTIONAL COUPLERS CP0603 SMD TYPE |
| 0 | ||
| CDS10ED300JO3 | Knowles CDE | Cap Mica 30pF 500V 5% (7.9 X 3 X 6.6mm) Radial 3.6 RoHS : Not Compliant |
| 0 | ||
| E6D30065D | Wolfspeed | Diode Schottky SiC 650V 100A 3-Pin(3+Tab) TO-247 T RoHS : Compliant | 0 | |||
| RMOD300-80-13.7SUW/MO | RECOM Power GmbH | 300W DC/DC-Converter 'PLUG & PLAY' 7.48""x2.99"" I RoHS : Compliant |
| 0 | ||
| E6D30065G | Wolfspeed | Diode Schottky SiC 650V 95A 3-Pin(2+Tab) TO-263 Tu RoHS : Compliant | 0 | |||
| 590BD300M000DG | Skyworks Solutions Inc | Oscillator XO 300MHz ±20ppm LVDS 55% 3.3V 6-Pin SM RoHS : Compliant |
| 0 | ||
| 590BD300M000DGR | Skyworks Solutions Inc | Oscillator XO 300MHz ±20ppm LVDS 55% 3.3V 6-Pin SM RoHS : Compliant |
| 0 | ||
| 2SD300C17A1 | Power Integrations | Power Supply RoHS : Not Compliant | 0 | |||
| MCM01-001DD300A-F | Knowles CDE | MICA CAPACITOR RoHS : Compliant | 0 | |||
| CDS10ED300JO3F | Knowles CDE | MICA CAPACITORS MINIATURE DIPPED RoHS : Compliant |
| 0 | ||
| CDS10ED300GO3 | Knowles CDE | Radial-Leaded Dipped Mica Capacitors RoHS : Not Compliant |
| 0 | ||
| BMD-300-EVAL | u-blox AG | BMD-300 Bluetooth Evaluation Kit RoHS : Compliant |
| 0 | ||
 Rutronik | MCS04020D3002BE000 | Vishay Intertechnologies | TF0402 30K 0,1% 0,063W TK25 RoHS : Compliant |
| 80,000 | |
| MCT06030D3003BP500 | Vishay Intertechnologies | TF0603 300K 0,1% 0,1W TK25 RoHS : Compliant |
| 50,000 | ||
| MCT06030D3001BP500 | Vishay Intertechnologies | TF0603 3K 0,1% 0,1W TK25 RoHS : Compliant |
| 40,000 | ||
| MCU08050D3001BP500 | Vishay Intertechnologies | TF0805 3K 0,1% 0,125W TK25 RoHS : Compliant |
| 40,000 | ||
| RK73H1JTTD3000F | KOA Speer Electronics Inc | RC0603 300R 1% 0,125W TK100 RoHS : Compliant |
| 10,000 | ||
| BL SMD 30-005 TRU | MPE-Garry GmbH | 05P Female Header 2.54mm SMD TR RoHS : Compliant |
| 1,300 | ||
| S3001-D300 | EnOcean GmbH | STM 300 TRX 868MHz EO RoHS : Compliant |
| 83 | ||
 Chip 1 Exchange | MMA02040D3000FB300 | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 170,300 | ||
| BR-S12PD/3000TR | INSTOCK | 10,000 | ||||
| D300002B | INSTOCK | 5,350 | ||||
| ERA3YHD300V | INSTOCK | 5,000 | ||||
| TDQD3-002A | Alps Alpine Co Ltd | INSTOCK | 4,643 | |||
| RK73H1JTTD3002F | KOA Speer Electronics Inc | INSTOCK RoHS : Compliant | 3,805 | |||
| RK73H1JTTD3002F | INSTOCK | 3,805 | ||||
| ZXGD3006E6Q | Diodes Incorporated | INSTOCK | 3,000 | |||
| VC120614D300RP | Avago Technologies | INSTOCK | 1,924 | |||
| FP2 D3001 | TE Connectivity | INSTOCK | 1,724 | |||
| D3002 | Intel Corporation | INSTOCK | 362 | |||
| D3002 | INSTOCK | 101 | ||||
| ZXGD3002E6TA | Diodes Incorporated | INSTOCK RoHS : Compliant | 70 | |||
| VC120614D300DP | Kyocera AVX Components | INSTOCK RoHS : Compliant | 48 | |||
| ISD-300A1 | Cypress Semiconductor | INSTOCK | 22 | |||
 Avnet Abacus | VC120614D300DP | Kyocera AVX Components | TVS Varistor 10 V 14 V TransGuard 32 V 1206 3216 Metric Multilayer Varistor MLV (Alt: VC120614D300DP) RoHS : Compliant | 162,000 | ||
| RK73H1JTTD3001F | KOA Speer Electronics Inc | Res Precision Thick Film 0603 3k Ohm 1 110W 100ppmC Molded Paper TR - Tape and Reel (Alt: RK73H1JTTD3001F) RoHS : Compliant | 105,000 | |||
| RN73H1JTTD3001B50 | KOA Speer Electronics Inc | - Tape and Reel (Alt: RN73H1JTTD3001B50) RoHS : Compliant | 55,000 | |||
| MCS04020D3002BE000 | Vishay Intertechnologies | - Tape and Reel (Alt: MCS04020D3002BE000) RoHS : Compliant | 50,000 | |||
| MCS04020D3001BE000 | Vishay Intertechnologies | - Tape and Reel (Alt: MCS04020D3001BE000) RoHS : Compliant | 50,000 | |||
| MCT06030D3000BP500 | Vishay Intertechnologies | - Tape and Reel (Alt: MCT06030D3000BP500) RoHS : Compliant | 45,000 | |||
| VC120614D300RP | Kyocera AVX Components | (Alt: VC120614D300RP) RoHS : Compliant | 32,000 | |||
| RK73H1JTTD3002F | KOA Speer Electronics Inc | SMD Chip Resistor 30 kohm 1 100 mW 0603 1608 Metric Thick Film Precision - Tape and Reel (Alt: RK73H1JTTD3002F) RoHS : Compliant | 25,000 | |||
| MCT06030D3001BP500 | Vishay Intertechnologies | - Tape and Reel (Alt: MCT06030D3001BP500) RoHS : Compliant | 25,000 | |||
| B72500D300H60 | TDK Corporation | TVS Varistor TVS 30 V 120 V 0603 1608 Metric Multilayer Varistor MLV (Alt: B72500D0300H060) RoHS : Compliant | 12,000 | |||
| BLM15PD300SN1D | Murata Manufacturing Co Ltd | (Alt: BLM15PD300SN1D) RoHS : Compliant | 10,000 | |||
| FW-25-03-L-D-300-085-A-P-TR | Samtec Inc | Board Stackers Spacers Pin Header 762 mm 50 Contacts Solder 2 Rows 127 mm FW Series (Alt: FW-25-03-L-D-300-085-A-P-TR) RoHS : Compliant | 150 | |||
| FW-09-03-L-D-300-075-ES-A-P-TR | Samtec Inc | Flex Stack Micro Board Stacker 127 mm Pitch (Alt: FW-09-03-L-D-300-075-ES-A-P-TR) RoHS : Compliant | 105 | |||
| 71BD30-01-1-AJN | Grayhill Inc | Switch Rotary SP Flatted Shaft Solder Lug 03A 115VAC 30VDC (Alt: 71BD30-01-1-AJN) RoHS : Compliant | 75 | |||
| IFL12-200ND300X200 | TDK Corporation | Noise Suppression Sheet 02mm Thickness 300x200mm (Alt: IFL12-200ND300X200) RoHS : Not Compliant | 30 | |||
Avnet Asia | RK73H1JTTD3002F | KOA Speer Electronics Inc | SMD Chip Resistor, 30 kohm, ? 1%, 100 mW, 0603 [1608 Metric], Thick Film, Precision (Alt: RK73H1JTTD3002F) RoHS : Compliant | 0 | ||
| VC120614D300RP | Kyocera AVX Components | (Alt: VC120614D300RP) RoHS : Compliant | 0 | |||
| MMBD3004CA RFG | Taiwan Semiconductor | (Alt: MMBD3004CA RFG) RoHS : Compliant | 0 | |||
| MCT06030D3001BP500 | Vishay Intertechnologies | (Alt: MCT06030D3001BP500) RoHS : Compliant | 0 | |||
| TS16GUSD300S | Transcend Information Inc | (Alt: TS16GUSD300S) RoHS : Compliant | 0 | |||
| ZXGD3005E6TA | Diodes Incorporated | (Alt: ZXGD3005E6TA) RoHS : Compliant | 0 | |||
| ZXGD3006E6QTA | Diodes Incorporated | (Alt: ZXGD3006E6QTA) RoHS : Compliant | 0 | |||
| MMA02040D3001BB100 | Vishay Intertechnologies | MMA 0204-25 0.1% B1 3K0 (Alt: MMA02040D3001BB100) RoHS : Compliant |
| 0 | ||
| ZXGD3003E6TA | Diodes Incorporated | (Alt: ZXGD3003E6TA) RoHS : Compliant | 0 | |||
| REBC325D-3001CBUB | TE Connectivity | (Alt: REBC325D-3001CBUB) RoHS : Compliant | 0 | |||
| ZXGD3009E6TA | Diodes Incorporated | MOSFET DRVR 3A 1-OUT High Speed Non-Inv6-Pin SOT-26 T/R (Alt: ZXGD3009E6TA) RoHS : Compliant |
| 0 | ||
| RK73H2ETTD3004F | KOA Speer Electronics Inc | THICK FILM RESISTORS 3 MOHMS 1% (Alt: RK73H2ETTD3004F) RoHS : Compliant | 0 | |||
| MMB02070D3003CB100 | Vishay Intertechnologies | Res Precision Thin Film 2309 300k Ohm 0.25% 2/5W ?25ppm/?C Conformal Melf T/R (Alt: MMB02070D3003CB100) RoHS : Compliant | 0 | |||
| HW-03-15-L-D-300-SM | Samtec Inc | (Alt: HW-03-15-L-D-300-SM) RoHS : Compliant | 0 | |||
| TS64GUSD300S | Transcend Information Inc | (Alt: TS64GUSD300S) RoHS : Compliant | 0 | |||
 Avnet Silica | MMBD3004C_R1_00001 | PanJit Semiconductor | (Alt: MMBD3004C_R1_00001) RoHS : Compliant | 18,000 | ||
| FOD817D300W | onsemi | 4Pin DIP Phototransistor Optocouplers ONSSPCISTNJZ8E4V (Alt: FOD817D300W) RoHS : Compliant | 2,000 | |||
| ZXGD3005E6TA | Diodes Incorporated | HighSpeed NonInverting Single Gate Driver 10A Out 20ns Delay SOT266 (Alt: ZXGD3005E6TA) RoHS : Compliant | 0 | |||
| ZXGD3001E6QTA | Diodes Incorporated | (Alt: ZXGD3001E6QTA) RoHS : Compliant | 0 | |||
| ZXGD3006E6QTA | Diodes Incorporated | MOSFET Driver Low Side Up to 40V Supply 10A Out 16ns Delay SOT266 (Alt: ZXGD3006E6QTA) RoHS : Compliant | 0 | |||
| DHVSD3004S3-7 | Diodes Incorporated | (Alt: DHVSD3004S3-7) RoHS : Compliant | 0 | |||
| MC33GD3000EPR2 | NXP Semiconductors | 3Phase Brushless DC Motor Controller 8V to 40V 56Pin QFN EP TR (Alt: MC33GD3000EPR2) RoHS : Compliant | 0 | |||
GS8342TT19BD-300 | GSI Technology | SRAM Chip Sync Single 18V 36MBit 2M x 18 045ns 165Pin FBGA (Alt: GS8342TT19BD-300) RoHS : Not Compliant | 0 | |||
| GS8662Q18BD-300M | GSI Technology | SRAM Chip Sync 18V 72MBit 4M x 18 165Pin FBGA (Alt: GS8662Q18BD-300M) RoHS : Not Compliant | 0 | |||
| GS8662D36BGD-300 | GSI Technology | SRAM Chip Sync Dual 18V 72MBit 2M x 36 045ns 165Pin FBGA Bulk (Alt: GS8662D36BGD-300) RoHS : Compliant | 0 | |||
| GS8342D36BGD-300I | GSI Technology | SRAM Chip Sync Dual 18V 36MBit 1M x 36 045ns 165Pin FBGA (Alt: GS8342D36BGD-300I) RoHS : Compliant | 0 | |||
| GS8342TT19BGD-300 | GSI Technology | SRAM Chip Sync Single 18V 36MBit 2M x 18 045ns 165Pin FBGA (Alt: GS8342TT19BGD-300) RoHS : Compliant | 0 | |||
| MMBD3004BRM_R2_00001 | PanJit Semiconductor | (Alt: MMBD3004BRM_R2_00001) RoHS : Compliant | 0 | |||
| SMJD-3005033G-BLE101A82GE38ALL | Seoul Semiconductor | DC boardMin Flux Lm 780CCT 3000K CRI80 (Alt: SMJD-3005033G-BLE101A82GE38ALL) RoHS : Compliant | 0 | |||
| 2J7A50BGFD-300LL195-C91GRST_300LL100 | 2J USA | 2J7A50BGFd1 Black Screw Mount LTE (Alt: SI311106736) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | BMD-300-EVAL | u-blox AG | EVK for BMD-300 with open CPU Stand-alone Bluetooth Low Energy Internal antenna |
| 0 | |
| SD-300-US | Silex Technology America Inc | SD-300 Serial Device Server, 10/100 Ethernet, RS-232 serial DB9M, US Power Supply |
| 0 | ||
| BMD-300-A-R | u-blox AG | Bluetooth Low Energy Module stand-alone, PCB antenna, open CPU 9.8x14.0 mm, 1000 pcs/reel RoHS : Compliant |
| 0 | ||
 Component Electronics, Inc | RK73H1JTTD3000F | KOA Speer Electronics Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 3,500 | |
| VC120614D300DP | Kyocera AVX Components | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,480 | ||
| K1D-3004001-E06 | Vishay Electro-Films | IN STOCK SHIP TODAY | 300 | |||
| DD-300 | Knowles CDE | IN STOCK SHIP TODAY |
| 250 | ||
| CMPD3003C-TR | Circuit Systems Company Inc | IN STOCK SHIP TODAY |
| 200 | ||
| AK08SOIC-D300 | Accutek Microcircuit Corporation | IN STOCK SHIP TODAY |
| 55 | ||
| MTSW-108-08-G-D-300 | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 48 | ||
| SMD300-2 | TE Connectivity | IN STOCK SHIP TODAY |
| 25 | ||
| CD15ED300JO3 | Knowles CDE | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 21 | ||
| U36D300LG582M63X130HP | United Chemi-Con Inc | IN STOCK SHIP TODAY |
| 15 | ||
| ZW-50-11-T-D-300-060 | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 9 | ||
| M87164A01ED300G | IN STOCK SHIP TODAY | 5 | ||||
| DND-3005-A | Skynet Electronics | IN STOCK SHIP TODAY |
| 4 | ||
| DND-3005 | Skynet Electronics | IN STOCK SHIP TODAY |
| 1 | ||
| 44D30-02-4-AJS | Grayhill Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 1 | ||
 DB Roberts | M1522-D-3005-B-16 | RAF Electronic Hardware | STANDARD BRASS SMOOTH SHANK SWAGE MOUNT STANDOFF | 0 | ||
| SDR-A84D-3000 | Sugatsune Kogyo Co Ltd | UPPER TRACK FOR SDR-A84D 3000 | 0 | |||
| M1975-D-3005-A | RAF Electronic Hardware | 0 | ||||
| RFD300-1/2A | Essentra Components | FLANGE PROTECTION DISCHDPE BLA | 0 | |||
| M1696-D-3005-S-12 | RAF Electronic Hardware | 0 | ||||
| FRD3000A | Essentra Components | ROUND FERRULE CAPLDPE BLACK | 0 | |||
| M1522-D-3005-B | RAF Electronic Hardware | 0 | ||||
| M1502-D-3005-B-12 | RAF Electronic Hardware | 0 | ||||
| M1502-D-3005-B | RAF Electronic Hardware | 0 | ||||
| M1655-D-3005-A | RAF Electronic Hardware | 0 | ||||
| M1536-D-3005-B | RAF Electronic Hardware | 0 | ||||
| RSSD-300 | Essentra Components | 0 | ||||
| M1508-D-3005-B-12 | RAF Electronic Hardware | 0 | ||||
| M1695-D-3005-S-12 | RAF Electronic Hardware | 0 | ||||
| M1985-D-3005-A | RAF Electronic Hardware | 0 | ||||
 EBV Elektronik | FOD817D300W | onsemi | 4Pin DIP Phototransistor Optocouplers ONSSPCISTNJZ8E4V (Alt: FOD817D300W) RoHS : Compliant | 6,000 | ||
| MC33GD3000EP | NXP Semiconductors | Motor DriverController DC Brushless 8 V to 40 V 6 Outputs 25 A 56 Pins HVQFNEP (Alt: MC33GD3000EP) RoHS : Compliant | 1,040 | |||
| 2ED300C17STROHSBPSA1 | Infineon Technologies AG | Development Board EiceDriver Safe IGBT Gate Driver 2Channel Half Bridge (Alt: SP000359188) RoHS : Compliant | 156 | |||
| VS-VS5HD300CW60 | Vishay Intertechnologies | Modules Rectifiers TO244 FRED (Alt: VS-VS5HD300CW60) RoHS : Compliant | 10 | |||
| FOD817D300 | onsemi | 4Pin DIP Phototransistor Optocouplers ONSSPCISTNJZ8E4V (Alt: FOD817D300) RoHS : Compliant | 0 | |||
| 2SD300C17A4 | Power Integrations | Dual Channel IGBT Driver Core 14V to 16V 15V15V Through Hole (Alt: 2SD300C17A4) RoHS : Compliant | 0 | |||
| 2SD300C17A1 | Power Integrations | MOSFET DRVR 30A 2OUT NonInv (Alt: 2SD300C17A1) RoHS : Not Compliant | 0 | |||
| 2ED300C17-ST | Infineon Technologies AG | (Alt: SP000100682) RoHS : Not Compliant | 0 | |||
| MMBD3004SE RFG | Taiwan Semiconductor | (Alt: MMBD3004SE RFG) RoHS : Compliant | 0 | |||
| MC33GD3000EPR2 | NXP Semiconductors | 3Phase Brushless DC Motor Controller 8V to 40V 56Pin QFN EP TR (Alt: MC33GD3000EPR2) RoHS : Compliant | 0 | |||
| FD300R06KE3HOSA1 | Infineon Technologies AG | (Alt: SP000393519) RoHS : Compliant | 0 | |||
| FD300R12KS4HOSA1 | Infineon Technologies AG | (Alt: SP000396766) RoHS : Compliant | 0 | |||
| FD300R07PE4B6BOSA1 | Infineon Technologies AG | (Alt: SP000873426) RoHS : Compliant | 0 | |||
| 2ED300C17SROHSBPSA1 | Infineon Technologies AG | Development Board EiceDriver Safe IGBT Gate Driver Galvanic Isolated 2Channel (Alt: SP000359184) RoHS : Compliant | 0 | |||
| ELSW-J21M3-0LPGS-D3000/EU | Everlight Electronics Co Ltd | High Power LEDs (Alt: H110004515) RoHS : Compliant | 0 | |||
 Flip Electronics | NCP140AMXD300TCG | onsemi | Stock, Ship Today RoHS : Compliant |
| 140,578 | |
| FOD817D300 | onsemi | Stock, Ship Today RoHS : Compliant |
| 41,994 | ||
| FOD817D300W | onsemi | Stock, Ship Today RoHS : Compliant |
| 5,780 | ||
| MC34GD3000EP | NXP Semiconductors | Stock RoHS : Compliant | 260 | |||
 Maritex | LDD-300L | Mean Well | Converter DC/DC; LED; 10W; 2-32VDC; 300mA; 9-36VDC RoHS : Compliant |
| 253 | |
| RSD-300B-24 | Mean Well | Converter DC/DC; 271.2W; 24V; 11.3A; 16.8-31.2VDC RoHS : Compliant |
| 124 | ||
| RSD-300F-24 | Mean Well | DC/DC converter; 300W; 24V; 12.5A; 50.4-93.6VDC RoHS : Compliant |
| 60 | ||
| RSD-300B-12 | Mean Well | Converter DC/DC; 270W; 12V; 22.5A; 16.8-31.2VDC RoHS : Compliant |
| 41 | ||
| RSD-300C-24 | Mean Well | Converter DC/DC; 300W; 24V; 12.5A; 33.6-62.4VDC RoHS : Compliant |
| 24 | ||
| RSD-300D-24 | Mean Well | Converter DC/DC; 300W; 24V; 12.5A; 67.2-143VDC RoHS : Compliant |
| 16 | ||
| RSD-300D-48 | Mean Well | Converter DC/DC; 302.4W; 48V; 6.3A; 67.2-143VDC RoHS : Compliant |
| 11 | ||
| RSD-300E-48 | Mean Well | Converter DC/DC; 302.4W; 48V; 6.3A; 25.2-46.8VDC RoHS : Compliant |
| 9 | ||
| RSD-300E-5 | Mean Well | Converter DC/DC; 210W; 5V; 42A; 25.2-46.8VDC RoHS : Compliant |
| 4 | ||
| RSD-300F-5 | Mean Well | DC/DC converter; 210W; 5V; 42A; 50-93.6VDC RoHS : Compliant |
| 4 | ||
| RSD-300E-12 | Mean Well | Converter DC/DC; 300W; 12V; 25A; 25.2-46.8VDC RoHS : Compliant |
| 3 | ||
| RSD-300C-48 | Mean Well | Converter DC/DC; 302.4W; 48V; 6.3A; 33.6-62.4VDC RoHS : Compliant |
| 2 | ||
| WD300-A, 0-10V, 1500MMM CABLE | senTec Elektronik GmbH | Wind direction sensor; Range: 360deg.; Supply Voltage: 12-24VDC, Resolution:0.1deg.; Output: 0-10V; Main material: aluminum; Ingress protection: IP65, Cable lenght: 1500mm |
| 1 | ||
| RSD-300C-5 | Mean Well | Converter DC/DC; 210W; 5V; 42A; 33.6-62.4VDC RoHS : Compliant |
| 1 | ||
 Master Electronics | 56BD30-01-1-AJN | Grayhill Inc | Switch Rotary SP Screwdriver Shaft Solder Lug 0.2A 115VAC 30VDC RoHS : Compliant |
| 0 | |
| MTLW-106-08-F-D-300 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTLW-107-08-G-D-300 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTLW-107-24-G-D-300 | Samtec Inc | .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTMM-103-14-G-D-300 | Samtec Inc | 2.00 mm Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTMM-103-15-T-D-300 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-104-07-F-D-300 | Samtec Inc | 2.00 mm Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTMM-105-07-G-D-300 | Samtec Inc | 2.00 mm Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTMM-105-08-T-D-300 | Samtec Inc | 2.00 mm Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTMM-107-05-S-D-300 | Samtec Inc | 2.00 mm Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| ZLTMM-105-02-G-D-300 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ZLTMM-105-62-S-D-300 | Samtec Inc | Conn Elevated Shrouded Header HDR 10 POS 2mm Solder ST Thru-Hole T/R RoHS : Compliant |
| 0 | ||
| ZLTMM-110-74-F-D-300 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ZLTMM-115-73-L-D-300 | Samtec Inc | Conn Board Stacker HDR 30 POS 7.62mm Stack Height 2mm Solder ST Through Hole Bulk RoHS : Compliant |
| 0 | ||
| ZLTMM-118-62-S-D-300 | Samtec Inc | Headers & Wire Housings RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3C8741/RD-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-RD, RF Cable Type: Belden 4694R-RD, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 12G SDI Cable 300 Inch Length Using 75 Ohm 4694R-RD Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 300 inch length using 75 Ohm 4694R-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 300 inch length using 75 Ohm 4694R-RD coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 12G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8741/RD-300, can also be known as a 12G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8741/RD-300 is built with belden 4694R-RD which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 300 inch length using 75 Ohm 4694R-RD coax. |
| 76 | |
| PE3C8743/RD-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-RD, RF Cable Type: Belden 4694R-RD, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 300 Inch Length Using 75 Ohm 4694R-RD Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4694R-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4694R-RD coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8743/RD-300, can also be known as a 12G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8743/RD-300 is built with belden 4694R-RD which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8743/RD-300 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 12G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4694R-RD coax. |
| 76 | ||
| PE3C8874/RD-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-RD, RF Cable Type: Belden 1855A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1855A-RD Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1855A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1855A-RD coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/RD-300, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/RD-300 is built with Belden 1855A-RD which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/RD-300 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1855A-RD coax. |
| 67 | ||
| PE3C8875/RD-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-RD, RF Cable Type: Belden 1855A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1855A-RD Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-RD coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/RD-300, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/RD-300 is built with Belden 1855A-RD which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-RD coax. |
| 51 | ||
| PE3C8749/RD-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-RD, RF Cable Type: Belden 4855R-RD, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 300 Inch Length Using 75 Ohm 4855R-RD Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4855R-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4855R-RD coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8749/RD-300, can also be known as a 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8749/RD-300 is built with belden 4855R-RD which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4855R-RD coax. |
| 51 | ||
| PE3C8747/RD-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-RD, RF Cable Type: Belden 4855R-RD, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 12G SDI Cable 300 Inch Length Using 75 Ohm 4855R-RD Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 300 inch length using 75 Ohm 4855R-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 300 inch length using 75 Ohm 4855R-RD coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 12G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8747/RD-300, can also be known as a 12G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8747/RD-300 is built with belden 4855R-RD which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 300 inch length using 75 Ohm 4855R-RD coax. |
| 44 | ||
| PE3C8815/RD-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-RD coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8815/RD-300, can also be known as a 6G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8815/RD-300 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8815/RD-300 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-RD coax. |
| 20 | ||
| PE3C8813/RD-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-RD coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8813/RD-300, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8813/RD-300 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-RD coax. |
| 20 | ||
| PE3C8818/RD-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-RD coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/RD-300, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/RD-300 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-RD coax. |
| 20 | ||
| PE3C8745/RD-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-RD, RF Cable Type: Belden 4694R-RD, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 300 Inch Length Using 75 Ohm 4694R-RD Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4694R-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4694R-RD coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8745/RD-300, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8745/RD-300 is built with belden 4694R-RD which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8745/RD-300 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4694R-RD coax. |
| 0 | ||
| PE3C8816/RD-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-RD coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8816/RD-300, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8816/RD-300 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-RD coax. |
| 0 | ||
| PE3C8814/RD-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-RD coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to HD-BNC cable is a male to male coax assembly, PE3C8814/RD-300, can also be known as a 6G SDI BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to HD-BNC plug cable assembly PE3C8814/RD-300 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8814/RD-300 can also be used in the other direction and will be HD-BNC male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-RD coax. |
| 0 | ||
| PE3C8742/RD-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-RD, RF Cable Type: Belden 4694R-RD, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm BNC Male to 75 Ohm HD-BNC Male 12G SDI Cable 300 Inch Length Using 75 Ohm 4694R-RD Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm HD-BNC male 12G SDI cable 300 inch length using 75 Ohm 4694R-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm HD-BNC male 12G SDI cable 300 inch length using 75 Ohm 4694R-RD coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and HD-BNC cable connection on the other. Our 12G SDI BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to HD-BNC cable is a male to male coax assembly, PE3C8742/RD-300, can also be known as a 12G SDI BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to HD-BNC plug cable assembly PE3C8742/RD-300 is built with belden 4694R-RD which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8742/RD-300 can also be used in the other direction and will be HD-BNC male to BNC male cable assembly if the opposite connectivity is required. 12G SDI BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm HD-BNC male 12G SDI cable 300 inch length using 75 Ohm 4694R-RD coax. |
| 0 | ||
| PE3C8817/RD-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-RD coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8817/RD-300, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8817/RD-300 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8817/RD-300 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-RD coax. |
| 0 | ||
| PE3C8744/RD-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-RD, RF Cable Type: Belden 4694R-RD, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 12G SDI Cable 300 Inch Length Using 75 Ohm 4694R-RD Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 300 inch length using 75 Ohm 4694R-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 300 inch length using 75 Ohm 4694R-RD coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 12G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8744/RD-300, can also be known as a 12G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8744/RD-300 is built with belden 4694R-RD which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 300 inch length using 75 Ohm 4694R-RD coax. |
| 0 | ||
 Venkel Ltd. | MMBD3004S-EVL | VENKEL LTD | Rectifier Array;SOT-23;240V;225mA RoHS : Not Compliant | 0 | ||
 Vyrian | 44UD30-06-1-AJN | Grayhill Inc | Rotary Switch, 12 Positions, SP12T, Latched, 1A, 28VDC, Screw Terminal, Single Shaft Type Actuator, Panel Mount RoHS : Compliant | 17,223 | ||
| 71BD30-01-2-AJN | Grayhill Inc | Rotary Switch, 6 Positions, DP6T, Latched, 0.25A, 28VDC, Solder Terminal, Adjustable Stop Type Actuator, Panel Mount-threaded RoHS : Compliant | 12,790 | |||
| FD300R06KE3HOSA1 | Infineon Technologies AG | Insulated Gate Bipolar Transistor, 400A I(C), 600V V(BR)CES, N-Channel RoHS : Compliant | 12,032 | |||
| MMBD3004CQ-7-F | Diodes Incorporated | Rectifier Diode, 2 Element, 0.225A, 350V V(RRM), Silicon | 10,184 | |||
| FD300R12KS4HOSA1 | Infineon Technologies AG | Insulated Gate Bipolar Transistor, 370A I(C), 1200V V(BR)CES, N-Channel RoHS : Compliant | 8,894 | |||
| TNETD3000REVM | Texas Instruments | 6,807 | ||||
| 86BSD300PA-3ASRL | TE Connectivity | Piezoresistive Sensor, Absolute, 0Psi Min, 299.86Psi Max, 0.25%, Round RoHS : Compliant | 6,261 | |||
| IKD300M/128GB | Kingston Technology Company | 5,986 | ||||
| IKD300SM/64GB | Kingston Technology Company | 5,527 | ||||
| IKD300M/64GB | Kingston Technology Company | 5,213 | ||||
| IKD300/16GB | Kingston Technology Company | 5,076 | ||||
| IKD300/32GB | Kingston Technology Company | 4,771 | ||||
| TNETD3000R | Texas Instruments | 4,395 | ||||
| TNETD3000RHDK | Texas Instruments | 4,111 | ||||
| ZX1-LD300A815M | OMRON Corporation | Displacement Sensor RoHS : Compliant | 485 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Spanish ▼ 
English
Chinese
German
Japanese
Russian
Korean
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand