C31L-AF5-R Price, Reseller, Stock

1 : $18.563
5 : $18.563
10 : $18.563
25 : $18.563
50 : $18.563
100 : $18.563
250 : $18.563
500 : $15.798
1,000 : $13.5
2,500 : $13.026
10,000 : $12.585

Maritex

AM26C31IPWR

Texas Instruments

RS-485/RS-422 Transceivers; AM26C31IPWR; TEXAS INSTRUMENTS; 4.5 V; 10 Mbps; Transceiver; 100 �A
RoHS : Compliant

1,000 : $0.291
500 : $0.321
100 : $0.374
30 : $0.473
10 : $0.559
1 : $0.777

40,121

TLV320ADC3101IRGER

Texas Instruments

Special-Purpose ADC/DAC; TLV320ADC3101IRGER; TEXAS INSTRUMENTS; 24; 2 B; Analog, Digital; I2C
RoHS : Compliant

1,000 : $0.592
500 : $0.645
100 : $0.759
30 : $0.921
10 : $1.093
1 : $1.47

28,840

ST26C31BTR

STMicroelectronics

Other Interface ICs; ST26C31BTR; STMICROELECTRONICS; 16; 5.5 V; TSSOP; 4.5 V
RoHS : Compliant

2,500 : $0.203
1 : $0.273

12,782

ESP-C3-12F-C3FN4

AI-Thinker

Module; Wi-Fi/Bluetooth; transceiver; 2400-2483.5MHz; +18dBm; -96dBm; UART/GPIO/I2C/I2S/PWM/ADC/SPI; ESP32-C3; 4Mb flash; built-in antenna; 3.0-3.6V; SMD; 24x16x3.1mm

100 : $1.819
25 : $2.163
1 : $2.328

7,375

C310003614S

Amphenol Corporation

Rectangular Connector Housings; C310003614S; AMPHENOL

1,000 : $0.201
500 : $0.249
100 : $0.291
10 : $0.44
1 : $0.688

4,651

TLV320AIC3104IRHBR

Texas Instruments

Audio Interface ICs; TLV320AIC3104IRHBR; TEXAS INSTRUMENTS; 32; 1.1 V; 3.6 V; 1 mm
RoHS : Compliant

1,000 : $1.032
500 : $1.131
100 : $1.27
30 : $1.349
10 : $1.771
1 : $2.037

1,188

R79GC3100Z340J

KEMET Corporation

Film Capacitors; R79GC3100Z340J; KEMET; Radial; 7.2 mm; 100 nF; 160 V
RoHS : Compliant

100 : $0.123
30 : $0.141
10 : $0.161
1 : $0.192

669

TLV320AIC3104IRHBT

Texas Instruments

Audio Interface ICs; TLV320AIC3104IRHBT; TEXAS INSTRUMENTS; 32; 3.6 V; 1 mm; VQFN
RoHS : Compliant

750 : $1.662
250 : $2.199
1 : $6.874

250

TLV320ADC3100IRGER

Texas Instruments

Special-Purpose ADC/DAC; TLV320ADC3100IRGER; TEXAS INSTRUMENTS; 24
RoHS : Compliant

1 : $0.756

Pasternack Enterprises US

PE3C3113-120

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 120 inches. N Male to N Female Bulkhead Low Loss Cable 120 Inch Length Using LMR-400-UF Coax., Radio frequency assembly N male to N female bulkhead low loss cable 120 inch length using LMR-400-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N female bulkhead low loss cable 120 inch length using LMR-400-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and N type bulkhead cable connection on the other. Our low loss type N to type N cable assemblies have a male gender on end 1 and female on end 2. PE3C3113-120 can also be known as a low loss type N plug to N type jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3C3113-120 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3113-120 can also be used in the other direction and will be type N female bulkhead to N type male cable assembly if the opposite connectivity is required. Low loss type N plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female bulkhead low loss cable 120 inch length using LMR-400-UF coax.

1 : $147.99
25 : $140.59
50 : $133.19
100 : $127.27

132

PE3C3197-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male Right Angle to SMA Male Right Angle Low Loss Cable 24 Inch Length Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly SMA male right angle to SMA male right angle low loss cable 24 inch length using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to SMA male right angle low loss cable 24 inch length using LMR-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C3197-24 can also be known as a low loss right angle SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C3197-24 is built with LMR-240 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMA right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male right angle low loss cable 24 inch length using LMR-240 coax with Times Microwave components.

1 : $111.99
25 : $106.39
50 : $100.79
100 : $96.31

PE3C3115-24

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm, Length: 24 inches. N Male Right Angle to N Female Low Loss Test Cable 24 Inch Length Using PE-P300LL Coax, LF Solder., Radio frequency assembly N male right angle to N female low loss test cable 24 inch length using PE-P300LL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male right angle to N female low loss test cable 24 inch length using PE-P300LL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss test cable assembly is built with right angle type N cable connection on one end and type N cable connection on the other. Our low loss test right angle N type to type N cable assemblies have a male gender on end 1 and female on end 2. This N type to type N cable is a male to female coax assembly, PE3C3115-24, can also be known as a low loss test right angle type N plug to N type jack cable assembly and will be shipped same-day as it is purchased. Type N plug to type N jack cable assembly PE3C3115-24 is built with PE-P300LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency N type right angle male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3115-24 can also be used in the other direction and will be type N female to right angle N type male cable assembly if the opposite connectivity is required. Low loss test N type right angle plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to N female low loss test cable 24 inch length using PE-P300LL coax, LF solder.

1 : $604.99
25 : $574.74
50 : $544.49

PE3C3136

Pasternack Enterprises

Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: Straight Cut Lead, Connector Gender 2: Sexless, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 0, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50. 1.85mm Male to Straight Cut Lead Cable Using RG405 Coax. PE3C3136 is a 1.85mm male to Straight Cut Lead sexless cable using RG405 coax. This Pasternack 1.85mm male to Straight Cut Lead sexless cable assembly uses a 50 Ohm 1.85mm for connector 1 and a Straight Cut Lead for connector 2. Our male 1.85mm to sexless Straight Cut Lead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3C3136 1.85mm male to Straight Cut Lead sexless cable assembly is constructed with RG405 coax.

PE3C3156LF

Pasternack Enterprises

Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Water Blue FAKRA Jack to FAKRA Jack Low Loss Cable Using LMR-100 Coax, LF Solder., Radio frequency assembly water blue FAKRA jack to FAKRA jack low loss cable using LMR-100 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Water blue FAKRA jack to FAKRA jack low loss cable using LMR-100 coax, LF solder, FAKRA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with FAKRA cable connection on one end and FAKRA cable connection on the other. Our low loss FAKRA to FAKRA cable assemblies have a jack gender on end 1 and jack on end 2. PE3C3156LF can also be known as a low loss FAKRA female to FAKRA female cable assembly and will be shipped same-day as it is purchased. FAKRA female to FAKRA female cable assembly PE3C3156LF is built with LMR-100A which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to FAKRA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency FAKRA jack to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss FAKRA female to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to FAKRA cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this water blue FAKRA jack to FAKRA jack low loss cable using LMR-100 coax, LF solder.

PE3C3181

Pasternack Enterprises

Key Specifications, Connector Series 1: LC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: C, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50. LC Male to C Male Cable Using RG393 Coax. PE3C3181 is a LC male to C type male cable using RG393 coax. This Pasternack LC male to type C male cable assembly uses a 50 Ohm LC for connector 1 and a 50 Ohm type C for connector 2. Our male LC to male type C cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3181 LC male to C type male cable assembly is constructed with RG393 coax.

PE3C3102

Pasternack Enterprises

Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: Straight Cut Lead, Connector Gender 2: Sexless, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 0, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50. Mini SMP Female to Straight Cut Lead Cable Using PE-047SR Coax. PE3C3102 is a Mini SMP female to Straight Cut Lead sexless cable using PE-047SR coax. This Pasternack Mini SMP female to Straight Cut Lead sexless cable assembly uses a 50 Ohm Mini SMP for connector 1 and a Straight Cut Lead for connector 2. Our female Mini SMP to sexless Straight Cut Lead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3C3102 Mini SMP female to Straight Cut Lead sexless cable assembly is constructed with PE-047SR coax.

PE3C3111-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: UHF, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tin/Nickel, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. UHF Male to UHF Male Low Loss Cable 12 Inch Length Using LMR-600-DB Coax with Times Microwave Components., Radio frequency assembly UHF male to UHF male low loss cable 12 inch length using LMR-600-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The UHF male to UHF male low loss cable 12 inch length using LMR-600-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom UHF to UHF cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a UHF cable connection on one end and a UHF cable connection on the other. Our low loss a UHF to a UHF cable assembly has male gender on end 1 and male on end 2. PE3C3111-12 can also be known as a low loss UHF plug to UHF plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3111-12 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. UHF plug to UHF plug cable assembly PE3C3111-12 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible UHF cable assembly is manufactured with UHF to UHF cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tin/nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss UHF plug to UHF plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality UHF to UHF cable assembly for quick shipment worldwide. Variations of UHF cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal UHF to UHF low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $252.99
25 : $240.34
50 : $227.69
100 : $217.57

PE3C3113/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50. N Male to N Female Bulkhead Cable Using LMR-400-UF Coax. PE3C3113/HS is a N type male to N type female bulkhead cable using LMR-400-UF coax. This Pasternack type N male to type N female bulkhead cable assembly uses a 50 Ohm type N for connector 1 and a 50 Ohm N type for connector 2. Our male type N to female type N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3113/HS type N male to type N female bulkhead cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C3139

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50. 2.92mm Male to SMP Female Cable Using PE-SR405FLJ Coax. PE3C3139 is a 2.92mm male to SMP female cable using PE-SR405FLJ coax. This Pasternack 2.92mm male to SMP female cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm SMP for connector 2. Our male 2.92mm to female SMP cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3C3139 2.92mm male to SMP female cable assembly is constructed with PE-SR405FLJ coax.

PE3C3184

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: SSMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50. SMA Male to SSMA Male Cable Using PE-SR405AL Coax. PE3C3184 is a SMA male to SSMA male cable using PE-SR405AL coax. This Pasternack SMA male to SSMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SSMA for connector 2. Our male SMA to male SSMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3C3184 SMA male to SSMA male cable assembly is constructed with PE-SR405AL coax.

PE3C3111

Pasternack Enterprises

Key Specifications, Connector 1 Series: UHF, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tin/Nickel, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm. UHF Male to UHF Male Low Loss Cable Using LMR-600-DB Coax with Times Microwave Components., Radio frequency assembly UHF male to UHF male low loss cable using LMR-600-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The UHF male to UHF male low loss cable using LMR-600-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom UHF to UHF cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a UHF cable connection on one end and a UHF cable connection on the other. Our low loss a UHF to a UHF cable assembly has male gender on end 1 and male on end 2. PE3C3111 can also be known as a low loss UHF plug to UHF plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3111 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. UHF plug to UHF plug cable assembly PE3C3111 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible UHF cable assembly is manufactured with UHF to UHF cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tin/nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss UHF plug to UHF plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality UHF to UHF cable assembly for quick shipment worldwide. Variations of UHF cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal UHF to UHF low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

PE3C3115-36

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Male Right Angle to N Female Low Loss Test Cable 36 Inch Length Using PE-P300LL Coax, LF Solder., Radio frequency assembly N male right angle to N female low loss test cable 36 inch length using PE-P300LL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male right angle to N female low loss test cable 36 inch length using PE-P300LL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss test cable assembly is built with right angle type N cable connection on one end and type N cable connection on the other. Our low loss test right angle type N to N type cable assemblies have a male gender on end 1 and female on end 2. This N type to type N cable is a male to female coax assembly, PE3C3115-36, can also be known as a low loss test right angle type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3C3115-36 is built with PE-P300LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to N type cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency type N right angle male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3115-36 can also be used in the other direction and will be type N female to right angle N type male cable assembly if the opposite connectivity is required. Low loss test type N right angle plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to N female low loss test cable 36 inch length using PE-P300LL coax, LF solder.

1 : $500.99
25 : $475.94
50 : $450.89

PE3C3122/HS

Pasternack Enterprises

PE3C3122LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. SMA Female to SMA Female Cable Using LMR-400 Coax, LF Solder. PE3C3122LF is a SMA female to SMA female cable using LMR-400 coax. This Pasternack SMA female to SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3122LF SMA female to SMA female cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems.

Relay Specialties

MSC-3.15A

OptiFuse

Glass Fuse; 3.15 A; Med Lag 5x20mm; UL 248-14; 250 VAC cULus/cURus

1 : $1.35
10 : $1.2
25 : $1.08
50 : $0.98
100 : $0.94

5,433

TSC-3.15A

OptiFuse

Glass Fuse; 3.15 A; Time-Delay 5x20mm; UL 248-14; 250 VAC cULus/cURus

1 : $0.84
10 : $0.75
25 : $0.67
50 : $0.61
100 : $0.58

1,014

BK/GDC-3.15A

Eaton Bussmann

Glass Body Fuses, 250 V/35A Holder, Slow Blow, 3.15 A 5mm x 20mm

1 : $1.54
5 : $1.48
10 : $1.38
25 : $1.29
50 : $1.21

100

1090C3-12V

Visual Communications Company

CML NEON & INCANDESCENT INDICA
RoHS : Compliant

1 : $6.45
10 : $6.23
25 : $6.02
50 : $5.82
100 : $5.63

TE Connectivity

IL13PS-C14-DUAL-LOCK-UC-3100-200

TE Connectivity

IL13PS-C14-DUAL-LOCK-UC-3100-200 Operating Voltage (Max): 250 VAC Current Rating (Max): 10 A Product Length: 200 mm Product Length: 7.87 in IP Rating: IP20 Il13P | 250 VAC 10 A 200 mm 7.87" | Part Number: IL13PS-C14-DUAL-LOCK-UC-3100-200 | Internal Number: 823428-SF | TE Connectivity
RoHS : Compliant

25 : $47.08
10 : $50.7
1 : $54.33

IL13PS-C14-DUAL-LOCK-UC-3100-300

TE Connectivity

IL13PS-C14-DUAL-LOCK-UC-3100-300 Operating Voltage (Max): 250 VAC Current Rating (Max): 10 A Product Length: 300 mm Product Length: 11.81 in IP Rating: IP20 Il13P | 250 VAC 10 A 300 mm 11.81" | Part Number: IL13PS-C14-DUAL-LOCK-UC-3100-300 | Internal Number: 823430-SF | TE Connectivity
RoHS : Compliant

25 : $55.29
10 : $59.55
1 : $63.81

HC-3/12VDC

TE Connectivity

HC-3/12VDC=RELAY, VACUUM, SPDT Relay & Contactor Type: High Voltage Relay Current Type: DC Contact Arrangement: 1 Form C SPDT-CO Contact Current Rating: 18 A Coil Voltage Rating: 12 VDC High Voltage Relay DC 1 Form C SPDT-CO 18 A | Electromechanical Relay | Part Number: HC-3/12VDC | Internal Number: 3-1618274-8 | TE Connectivity
RoHS : Compliant

1 : $971.88

Venkel Ltd.

HPTF0805-TC-3163CT

VENKEL LTD

High Power Thin Film CR;0805;1/4W;�50PPM;316K ;�0.25%
RoHS : Compliant

HPTF0805-TC-31R6BT

VENKEL LTD

High Power Thin Film CR;0805;1/4W;�50PPM;31.6R;�0.1%
RoHS : Compliant

HPTF1210-UC-31R6FT

VENKEL LTD

High Power Thin Film CR;1210;1/3W;�50PPM;31.6R;�1%
RoHS : Compliant

MEHF0204-ZC-31R6GT

VENKEL LTD

High Frequency MELF;0204;2/5W;�50PPM;31.6R�2%
RoHS : Not Compliant

MELFC0207-VC-3160CT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�50PPM;316R;�0.25%
RoHS : Compliant

HPTF0603-SC-3163CT

VENKEL LTD

High Power Thin Film CR;0603;1/6W;�50PPM;316K ;�0.25%
RoHS : Compliant

HPTF0603-SC-31R6BT

VENKEL LTD

High Power Thin Film CR;0603;1/6W;�50PPM;31.6R;�0.1%
RoHS : Compliant

MELFC0204-TC-3160FT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�50PPM;316R;�1%
RoHS : Compliant

MELFC0204-ZC-3160DT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�50PPM;316R;�0.5%
RoHS : Compliant

MELFC0207-VC-3161FT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�50PPM;3.16K;�1%
RoHS : Compliant

MELFM0207-VC-3160CT

VENKEL LTD

MELF Molded Thin Film CR;0207;1/2W;�50PPM;316R;�0.25%
RoHS : Not Compliant

MELFC0102-UC-31R6FT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/5W;�50PPM;31.6R;�1%
RoHS : Compliant

MELFC0102-YC-3162FT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/3W;�50PPM;31.6K;�1%
RoHS : Compliant

TFCR0402-16W-C-3121CT-1K

VENKEL LTD

Thin Film CR;0402;1/16W;�50PPM;3.12K;�0.25%
RoHS : Compliant

TFCR0402-16W-C-3161FT

VENKEL LTD

Thin Film CR;0402;1/16W;�50PPM;3.16K;�1%
RoHS : Compliant

Vyrian

REC3-1215DRW/H4/A/CTRL

RECOM Power GmbH

DC-DC Regulated Power Supply Module, 2 Output, 3W, Hybrid
RoHS : Compliant

15,743

D4N-6C31

OMRON Corporation

Snap Acting/Limit Switch, 3PST, Momentary, 2.5A, 250VDC, 6mm, Screw Terminal, Top Plunger Actuator, Panel Mount
RoHS : Compliant

13,377

ADM6319C31ARJZ-R7

Analog Devices Inc

Power Supply Support Circuit, Fixed, 1 Channel, +3.1VV, PDSO5
RoHS : Compliant

12,043

LTC3115EDHD-2#PBF

Analog Devices Inc

Switching Regulator, Voltage-mode, 2A, 2000kHz Switching Freq-Max, CMOS, PDSO16
RoHS : Compliant

11,792

LTC3115IFE-1#PBF

Analog Devices Inc

Switching Regulator, Voltage-mode, 2000kHz Switching Freq-Max, CMOS, PDSO20
RoHS : Compliant

11,563

DAC3174IRGCR

Texas Instruments

D/A Converter, 1 Func, Parallel, Word Input Loading, 0.011us Settling Time, PQCC64
RoHS : Compliant

8,683

LTC3111IDE#TRPBF

Analog Devices Inc

Switching Regulator, Voltage-mode, 1500kHz Switching Freq-Max, CMOS, PDSO14
RoHS : Compliant

7,492

LTC3108EGN-PBF

Analog Devices Inc

6,388

LTC3118HFE#TRPBF

Analog Devices Inc

Switching Regulator, Current-mode, 1200kHz Switching Freq-Max, CMOS, PDSO28
RoHS : Compliant

6,171

MT58LC128K18E1S27BDC3-10

Micron Technology Inc

Standard SRAM, 128KX18, CMOS

5,616

LTC3107EDD-PBF

Analog Devices Inc

5,447

AM26C31CDBLE

Texas Instruments

Line Driver, 4 Func, 4 Driver, BICMOS, PDSO16
RoHS : Not Compliant

3,863

LDC3114QPWTQ1

Texas Instruments

Inductive Sensor, 0.36-1.44V, Rectangular, Surface Mount
RoHS : Compliant

3,606

KGM100X72C3/128

Kingston Technology Company

2,400

DS26C31TMDC

National Semiconductor Corporation

Line Driver, 4 Func, 4 Driver, CMOS
RoHS : Compliant

454

Waytek, Inc.

22AAWC310400

Essentra Components

.39" Bundle Adjustable Clamp Black, wire, Adhesive Backed WIDTH 3/4 " MIN BUNDLE .311"

20 : $0.2518
200 : $0.2387
500 : $0.2209
1,000 : $0.2126

11,421

RT40R0C3 115-06200

HellermannTyton

HellermannTyton RT40R0C2 releasable cable tie is an 8.5" reusable self-locking tie built for temporary or serviceable wire and cable bundling. Its releasable head design allows adjustment or removal without cutting, making it useful for maintenance, testing, and rework applications.

100 : $0.1877
200 : $0.1769
500 : $0.1635
1,000 : $0.1573

2,300

PC792A-1C-C3-12S-RNX

Picker Components

Mini ISO Relay 12V, SPDT 40A NO, 30A NC, Resistor

1 : $5.2722
50 : $4.167
100 : $3.8333
500 : $3.6147
1,000 : $3.4651

2,252

PC792A-1C-C3-12S-DNX

Picker Components

Mini ISO Relay, 12V, SPDT 40A NO, 30A NC, Diode Skirted, Repl#75633|Sub#75615

1 : $4.9337
50 : $3.9188
100 : $3.5944
500 : $3.3853
1,000 : $3.2387

C31L-AF5-R Reseller

Enlace URL