 |
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
|
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
C208-DS02-R Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
 TME | MDC-208 | Ninigi | Connector: DIN mini; socket; female; audio video; PIN: 8; THT |
| 478 | |
| C.2080 | Pawbol Sp zoo | Stopper; ABS; W: 52mm; L: 219mm; for enclosures; white |
| 141 | ||
| A9C20867 | Schneider Electric | Contactor: 4-pole installation; 63A; 230÷240VAC; NC x4; IP20; ICT RoHS : Compliant |
| 2 | ||
| A9C20847 | Schneider Electric | Contactor: 4-pole installation; 40A; 230÷240VAC; NC x4; IP20; ICT RoHS : Compliant |
| 1 | ||
| DF40C(2.0)-80DS-0.4V(51) | Hirose Electric Co Ltd | Connector: PCB to PCB; socket; female; data; PIN: 80; DF40; vertical RoHS : Compliant |
| 0 | ||
| MCT06030C2082DP500 | Vishay Intertechnologies | Resistor: thin film; 20.8kΩ; SMD; 0603; 0.125W; ±0.5%; MCT0603; 0 RoHS : Compliant |
| 0 | ||
| MCT06030C2083DPW00 | Vishay Intertechnologies | Resistor: thin film; 208kΩ; SMD; 0603; 0.125W; ±0.5%; MCT0603; 0; 75V RoHS : Compliant |
| 0 | ||
| MCT06030C2081DP500 | Vishay Intertechnologies | Resistor: thin film; 2.08kΩ; SMD; 0603; 0.125W; ±0.5%; MCT0603; 0 RoHS : Compliant |
| 0 | ||
| MCT06030C2082DPW00 | Vishay Intertechnologies | Resistor: thin film; 20.8kΩ; SMD; 0603; 0.125W; ±0.5%; MCT0603; 0 RoHS : Compliant |
| 0 | ||
| CIPR-GA50C2082ABAA-BAAASA | Yaskawa Controls Co Ltd | Automation module: vector inverter; 18.5/22kW; 3x230VAC; 0÷590Hz |
| 0 | ||
| CIPR-GA70C2082BBAA-BAAAAA | Yaskawa Controls Co Ltd | Automation module: vector inverter; 18.5/22kW; 3x230VAC; 0÷590Hz |
| 0 | ||
| MCT06030C2083DP500 | Vishay Intertechnologies | Resistor: thin film; 208kΩ; SMD; 0603; 0.125W; ±0.5%; MCT0603; 0; 75V RoHS : Compliant |
| 0 | ||
| IC3-IDC20-IDC20-800 | WIRFA | Cable; Cores: 20; 800mm; IDC,both sides |
| 0 | ||
| MCT06030C2081DPW00 | Vishay Intertechnologies | Resistor: thin film; 2.08kΩ; SMD; 0603; 0.125W; ±0.5%; MCT0603; 0 RoHS : Compliant |
| 0 | ||
| EVC208 | ifm efector inc | Cable: for sensors; automatics |
| 0 | ||
 Avnet Americas | DALC208SC6 | STMicroelectronics | ESD Protection Device, Array, SOT-23, 6 Pins, 1.2 V, DALC2 - Tape and Reel (Alt: DALC208SC6) RoHS : Compliant |
| 408,000 | |
| HLMP-C208-S0000 | Broadcom Limited | - Bulk (Alt: HLMP-C208-S0000) RoHS : Compliant |
| 7,000 | ||
| NK-2C2-085-125-TH00 | Molex | I/O Connector, Plug, Nano-D Subminiature Connector, 85 Contacts, Gold, Beryllium Copper, Right Angle - Tape and Reel (Alt: NK-2C2-085-125-TH00) RoHS : Not Compliant |
| 10 | ||
AMPMDGC-2.0800 | Abracon Corporation | MEMS Oscillator, 2.08 MHz, SMD, 2.5mm x 2mm, 50 ppm, 3.3 V, AMPM - Bulk (Alt: AMPMDGC-2.0800) RoHS : Compliant | 0 | |||
| AMPMGFC-2.0800 | Abracon Corporation | MEMS Oscillator, 2.08 MHz, SMD, 1.6mm x 1.2mm, 25 ppm, 3.3 V, AMPM - Bulk (Alt: AMPMGFC-2.0800) RoHS : Compliant | 0 | |||
| RNR60C2080DSBSL1 | Vishay Intertechnologies | - Bulk (Alt: RNR60C2080DSBSL1) RoHS : Not Compliant |
| 0 | ||
| RNR60C2083DSBSL | Vishay Intertechnologies | - Bulk (Alt: RNR60C2083DSBSL) RoHS : Not Compliant |
| 0 | ||
| SP02C-20-8P(362) | Amphenol Corporation | - Bulk (Alt: SP02C-20-8P(362)) RoHS : Not Compliant |
| 0 | ||
| SP07C-20-8S(014) | Amphenol Corporation | - Bulk (Alt: SP07C-20-8S(014)) RoHS : Not Compliant |
| 0 | ||
| 801-069-26M11-31PC208 | Glenair Inc | Circular Connector, Mighty Mouse 801 Series, Right Angle Plug, 31 Contacts, Crimp Pin, Threaded - Bulk (Alt: 801-069-26M11-31PC208) RoHS : Not Compliant |
| 0 | ||
| 801-069-26NF11-31SC208 | Glenair Inc | Circular Connector, Mighty Mouse 801 Series, Right Angle Plug, 31 Contacts, Crimp Socket, Threaded - Bulk (Alt: 801-069-26NF11-31SC208) RoHS : Not Compliant |
| 0 | ||
| 801-069-26NF19-100BC208 | Glenair Inc | Circular Connector, Mighty Mouse 801 Series, Right Angle Plug, 100 Contacts - Bulk (Alt: 801-069-26NF19-100BC208) RoHS : Not Compliant |
| 0 | ||
ATS-01C-208-C1-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HO - Trays (Alt: ATS-01C-208-C1-R0) RoHS : Compliant |
| 0 | ||
| ATS-14C-208-C1-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HO - Trays (Alt: ATS-14C-208-C1-R0) RoHS : Compliant |
| 0 | ||
| AMPMAEC-2.0800T3 | Abracon Corporation | MEMS Oscillator, 2.08 MHz, SMD, 2mm x 1.6mm, 50 ppm, 3.3 V, AMPM - Tape and Reel (Alt: AMPMAEC-2.0800T3) RoHS : Compliant | 0 | |||
 Newark | CBR06C208B5GACAUTO | KEMET Corporation | Rf Capacitor, 0.2Pf, 50V, 125Deg C, 0603; |Kemet CBR06C208B5GACAUTO RoHS : Compliant |
| 10,190 | |
| CBR06C208B5GACAUTO | KEMET Corporation | Cap, Rf, 0.2Pf, 50V, ±0.1Pf; |Kemet CBR06C208B5GACAUTO RoHS : Compliant |
| 1,141 | ||
| CBR06C208B5GACAUTO | KEMET Corporation | Cap, Rf, 0.2Pf, 50V, ±0.1Pf; |Kemet CBR06C208B5GACAUTO RoHS : Compliant |
| 1,141 | ||
| CSEC208-0802A001C1AC | Greenconn Corp | Connector, Rcpt, 16Pos, 2Row, 1.27Mm; Available Until Stocks Are Exhausted |Greenconn CSEC208-0802A001C1AC RoHS : Compliant |
| 1,046 | ||
| CSEC208-1002A001C1AC | Greenconn Corp | Connector, Rcpt, 20Pos, 2Row, 1.27Mm; Available Until Stocks Are Exhausted |Greenconn CSEC208-1002A001C1AC RoHS : Compliant |
| 997 | ||
| CSEC208-0502A001C1AC | Greenconn Corp | Connector, Rcpt, 10Pos, 2Row, 1.27Mm; Available Until Stocks Are Exhausted |Greenconn CSEC208-0502A001C1AC RoHS : Compliant |
| 540 | ||
| MC20805B6W-FPTLW-V2 | Midas Displays | Display, Alphanumeric, 8X2, White; |Midas Displays MC20805B6W-FPTLW-V2 RoHS : Compliant |
| 294 | ||
| MC20805A12W-VNMLW | Midas Displays | Lcd, Alpha-Num, 8 X 2, White; |Midas Displays MC20805A12W-VNMLW RoHS : Compliant |
| 156 | ||
| MEC2-08-01-L-DV-WT | Samtec Inc | Card Edge Conn, Dual Side, 16Pos, Smd; |Samtec, Inc. MEC2-08-01-L-DV-WT RoHS : Compliant |
| 64 | ||
| ATS-TEC20-84-054 | Advanced Thermal Solutions Inc | Tec Module, 20X20X4.2; |Advanced Thermal Solutions ATS-TEC20-84-054 RoHS : Compliant |
| 50 | ||
| MC20805A6W-GPTLY-V2 | Midas Displays | Display, Alphanumeric, 8X2, Yellow/Grn; |Midas Displays MC20805A6W-GPTLY-V2 RoHS : Compliant |
| 49 | ||
| SC2087 | Fairview Microwave Inc | |Fairview Microwave SC2087 RoHS : Compliant |
| 35 | ||
| MC20805A6W-FPTLWI-V2 | Midas Displays | Lcd Disp Alphan 8 X 2 Black On White 5V; |Midas Displays MC20805A6W-FPTLWI-V2 RoHS : Compliant |
| 7 | ||
| DC2086A | Analog Devices Inc | Powered Programming Adapter, Psm Product; |Analog Devices, Inc. DC2086A RoHS : Compliant |
| 2 | ||
| MPAC208 PRO KIT | Megger Group Limited | Acoustic Camera Pro Kit, Acoustic Camera; |Megger MPAC208 PRO KIT RoHS : Not Compliant |
| 1 | ||
 Analog Devices Inc | DC2084A | Analog Devices Inc | LTC3884EUK/LTC3874EUFD Demo Bo |
| 74 | |
| DC208A-B | Analog Devices Inc | LTC1559CS8-5 - SINGLE CELL BAC |
| 49 | ||
| DC2081A-A | Analog Devices Inc | LTM4630EV Demo Board - High Ef RoHS : Compliant |
| 38 | ||
| DC2081A-B | Analog Devices Inc | LTM4630EY-1 Demo Board - Dual RoHS : Compliant |
| 33 | ||
| DC2088A | Analog Devices Inc | LTC3880EUJ Demo Board - 7V ? V RoHS : Compliant |
| 24 | ||
| DC2086A | Analog Devices Inc | Powered Programming Adapter fo RoHS : Compliant |
| 22 | ||
| DC2089A-B | Analog Devices Inc | LTC3880EUJ/LTC3870EUFD DCR SEN RoHS : Compliant |
| 16 | ||
| DC2085A-D | Analog Devices Inc | LTC2000A-16 Demo Board (HSMC) |
| 15 | ||
| DC2089A-A | Analog Devices Inc | LTC3880EUJ/LTC3870EUFD RSENSE RoHS : Compliant |
| 14 | ||
| DC2085A-A | Analog Devices Inc | LTC2000-16 Demo Board (HSMC) - |
| 11 | ||
| DC2085A-F | Analog Devices Inc | LTC2000A-11 Demo Board (HSMC) |
| 6 | ||
 RS | 831860C2.0 (83186001) | Crouzet | SWITCH SNAP ACTION SUBMINIATURE, 83180 SERIES |
| 1,732 | |
| C2080 | Heyco | HOLE PLUG, NYLON 66/TPE, BLACK, HOLE SIZE 1.375 IN, LTBP SERIES RoHS : Compliant |
| 498 | ||
| C20820400 | Norgren | FITTING, UNION PARALLEL Y 1/4" |
| 47 | ||
| C20820200 | Norgren | FITTING, UNION Y 5/32" |
| 10 | ||
| C20820600 | Norgren | FITTING, UNION Y 3/8 |
| 6 | ||
| TC208 | Weller Hand Tools GmbH | WELLER, HEATING ELEMENT FOR SOLDERING PENCIL ON WTCP SERIES SOLDERING STATIONS |
| 2 | ||
| JC20-8-125 | SMC Corporation of America | LIGHT WEIGHT FLOATING JOINT, M8 X 1.25 PORT SIZE, ALUMINUM, JC SERIES |
| 1 | ||
| C208 | Goodyear Belts | CLASSICAL V-BELT, 1 BAND, C' SECTION |
| 0 | ||
| JC2-08/J (JC2-08-J) | Eaton Electronics | JUMPER/CONTACT |
| 0 | ||
| 01C208EX (COP.01 C 208 EX) | SKF Cooper | COOPER SPLIT BEARING |
| 0 | ||
| UC208-24-TRL (PER.UC208-24T) | PEER Bearing Company | PEER AGRICULTURE (AG) |
| 0 | ||
| HC208-24-TRL (PER.HC208-24XT) | PEER Bearing Company | PEER AGRICULTURE (AG) |
| 0 | ||
| 01EBC208GRAT (COP.01EBC208GRAT) | SKF Cooper | COOPER BEARING AND CARTRIDGE ASSEMBLY, BORE DIA. 2-1/2 IN |
| 0 | ||
| HC208-24-AP-TRL (PER.HC208-24ATN) | PEER Bearing Company | PEER AGRICULTURE (AG) |
| 0 | ||
| UC208-24-CUTTER (PER.UC208-24-CUTTER) | PEER Bearing Company | PEER MOUNTED INSERT (MI) |
| 0 | ||
 STMicroelectronics | DALC208SC6Y | STMicroelectronics | Automotive low capacitance diode array for ESD protection RoHS : Compliant |
| 2,614 | |
| DALC208SC6 | STMicroelectronics | LOW CAPACITANCE DIODE ARRAY RoHS : Compliant |
| 31 | ||
 Microchip Technology Inc | DSPIC33AK256MC208-I/PT | Microchip Technology Inc | 200MHz, 256KB Flash, FuSa-Compliant, HS-Analog, HS-PWMs, Touch, TQFP, Projected EOL: 2051-05-27 RoHS : Compliant |
| 119 | |
| DSPIC33AK512MC208-I/PT | Microchip Technology Inc | 200MHz, 512KB Flash, FuSa-Compliant, HS-Analog, HS-PWMs, Touch, TQFP, Projected EOL: 2051-05-27 RoHS : Compliant |
| 19 | ||
| TSC 2080 | Microchip Technology Inc | MD LC03721 10-25 DUAL 1X4 RF SWITCH, Projected EOL: 2035-01-12 - Contact for Pricing RoHS : Compliant | 0 | |||
| MIC2085-JYQS | Microchip Technology Inc | Single-Channel Low Voltage Hot Swap Controller, VFAST = 100 mV, QSOP, Projected EOL: 2036-03-29 - Contact for Pricing RoHS : Compliant | 0 | |||
| MIC2085-JYQS-TR | Microchip Technology Inc | Single-Channel Low Voltage Hot Swap Controller, VFAST = 100 mV, QSOP, Projected EOL: 2036-06-16 - Contact for Pricing RoHS : Compliant | 0 | |||
| DSPIC33AK256MC208-E/PT | Microchip Technology Inc | 200MHz, 256KB Flash, FuSa-Compliant, HS-Analog, HS-PWMs, Touch, TQFP, Projected EOL: 2051-01-28 RoHS : Compliant |
| 0 | ||
| DSPIC33AK256MC208-H/PT | Microchip Technology Inc | 200MHz, 256KB Flash, FuSa-Compliant, HS-Analog, HS-PWMs, Touch, TQFP, Projected EOL: 2051-01-28 RoHS : Compliant |
| 0 | ||
| DSPIC33AK512MC208-H/PT | Microchip Technology Inc | 200MHz, 512KB Flash, FuSa-Compliant, HS-Analog, HS-PWMs, Touch, TQFP, Projected EOL: 2051-01-28 RoHS : Compliant |
| 0 | ||
| DSPIC33AK512MC208-E/PT | Microchip Technology Inc | 200MHz, 512KB Flash, FuSa-Compliant, HS-Analog, HS-PWMs, Touch, TQFP, Projected EOL: 2051-01-28 RoHS : Compliant |
| 0 | ||
| DSPIC33AK512MC208T-E/PT | Microchip Technology Inc | 200MHz, 512KB Flash, FuSa-Compliant, HS-Analog, HS-PWMs, Touch, TQFP, Projected EOL: 2051-01-28 RoHS : Compliant |
| 0 | ||
| DSPIC33AK256MC208T-E/PT | Microchip Technology Inc | 200MHz, 256KB Flash, FuSa-Compliant, HS-Analog, HS-PWMs, Touch, TQFP, Projected EOL: 2051-01-28 RoHS : Compliant |
| 0 | ||
| DSPIC33AK256MC208T-I/PT | Microchip Technology Inc | 200MHz, 256KB Flash, ISO 26262-Compliant, HS-Analog, HS-PWMs, Touch, TQFP, Projected EOL: 2051-05-27 RoHS : Compliant |
| 0 | ||
| DSPIC33AK512MC208T-I/PT | Microchip Technology Inc | 200MHz, 512KB Flash, ISO 26262-Compliant, HS-Analog, HS-PWMs, Touch, TQFP, Projected EOL: 2051-05-27 RoHS : Compliant |
| 0 | ||
 Bisco Industries | MS24693-C208 | North East Fasteners Corporation | 9,072 | |||
| C2082 | Heyco | RoHS : Compliant | 49 | |||
| C20883-2 | MISC. INDUSTRIAL CONNECTORS | 25 | ||||
| 17P1C2088-503 | SPRINGS | 20 | ||||
| 20097-12C-208 | Unbrako Group | 4 | ||||
| 79NC2-0832 | Greer Stop Nut Inc | 3 | ||||
| MC-C20883-2 | MISC. INDUSTRIAL CONNECTORS | 1 | ||||
| C20858-1 | MISC. INDUSTRIAL CONNECTORS | 1 | ||||
 Rochester Electronics | CAT24C208WI-GT3 | onsemi | EEPROM 8kbit 1k x 8 2.5V - 5.5V I²C 400kHz 900ns 5ms 8-SOIC T/R RoHS : Compliant |
| 0 | |
| CDC208DBR | Texas Instruments | Bus Driver, 2-Func, 4-Bit, True Output, CMOS, PDSO20 RoHS : Not Compliant |
| 1,077 | ||
EPF10K100EQC208-2X | Altera Corporation | FPGAs FLEX 10KE 49152b 2.375V 147 I/O 208-QFP Tray RoHS : Not Compliant |
| 300 | ||
| EPF10K50SQC208-1 | Altera Corporation | FPGAs FLEX 10KE 40960b 2.375V 147 I/O 208-QFP Tray RoHS : Not Compliant |
| 3 | ||
| EPM7256AQC208-12 | Altera Corporation | CPLD EE PLD 256 Macrocell 3V - 3.6V 208-QFP RoHS : Not Compliant |
| 294 | ||
| EP20K200RC208-3V | Altera Corporation | FPGAs APEX-20K 106496b 1.71V 144 I/O 208-QFP Tray RoHS : Compliant |
| 89 | ||
| EP1K10QC208-2N | Altera Corporation | FPGAs ACEX-1K 12288b 2.375V 120 I/O 208-QFP Tray RoHS : Compliant |
| 1 | ||
| EP20K200EQC208-1X | Altera Corporation | FPGAs APEX-20KE 106496b 1.71V 136 I/O 208-QFP Tray RoHS : Not Compliant |
| 48 | ||
| EPF10K100EQC208-1 | Altera Corporation | FPGAs FLEX 10KE 49152b 2.375V 147 I/O 208-QFP Tray RoHS : Not Compliant |
| 65 | ||
| EPF10K50SQC208-3N | Altera Corporation | FPGAs FLEX 10KE 40960b 2.375V 147 I/O 208-QFP Tray RoHS : Compliant |
| 158 | ||
| EP1K10QC208-2 | Altera Corporation | FPGAs ACEX-1K 12288b 2.375V 120 I/O 208-QFP Tray RoHS : Not Compliant |
| 870 | ||
| EPF10K100EQC208-1X | Altera Corporation | FPGAs FLEX 10KE 49152b 2.375V 147 I/O 208-QFP Tray RoHS : Not Compliant |
| 197 | ||
| EPM7256AQC208-7 | Altera Corporation | CPLD EE PLD 256 Macrocell 3V - 3.6V 208-QFP RoHS : Not Compliant |
| 783 | ||
| EPM7256ERC208-20 | Altera Corporation | CPLD EE PLD 256 Macrocell 4.75V - 5.25V 208-QFP Tray RoHS : Not Compliant |
| 1,074 | ||
| EPM7512BQC208-10 | Altera Corporation | CPLD EE PLD 512 Macrocell 2.375V - 2.625V 208-QFP Tray RoHS : Not Compliant |
| 271 | ||
 Sager | EC2085-000 | TE Connectivity | TE Connectivity | 0 | ||
| ATS-01C-208-C1-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,NO TIM |
| 0 | ||
| ATS-14C-208-C1-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,NO TIM |
| 0 | ||
| MEC2-08-02-L-DV-NP-WT-K-FR | Samtec Inc | Standard Card Edge Connectors | 0 | |||
| MEC2-08-02-L-DV-NP-WT | Samtec Inc | Standard Card Edge Connectors 2.00 mm Mini Edge Card Connector, Vertical RoHS : Compliant |
| 0 | ||
| ATS-21C-208-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T766 RoHS : Compliant |
| 0 | ||
| MEC2-08-01-L-DV-K-TR | Samtec Inc | Standard Card Edge Connectors 2.00 mm Mini Edge Card Connector, Vertical RoHS : Compliant |
| 0 | ||
| ATS-17C-208-C3-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T412 |
| 0 | ||
| ATS-04C-208-C3-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T412 RoHS : Compliant |
| 0 | ||
| MEC2-08-01-L-DV-FR | Samtec Inc | Standard Card Edge Connectors 2.00 mm Mini Edge Card Connector, Vertical RoHS : Compliant |
| 0 | ||
| MEC2-08-02-L-DV-NP-WT-FR | Samtec Inc | Standard Card Edge Connectors | 0 | |||
| ATS-18C-208-C1-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,NO TIM |
| 0 | ||
| ATS-05C-208-C1-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,NO TIM RoHS : Compliant |
| 0 | ||
| MEC2-08-01-L-TH1-NP-WT | Samtec Inc | Standard Card Edge Connectors 2.00 mm Mini Edge Card Connector, Vertical RoHS : Compliant |
| 0 | ||
| ATS-20C-208-C3-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T412 RoHS : Compliant |
| 0 | ||
 Ameya Holding Limited | PI6C20800BAEX | Diodes Incorporated | 3.3V, 100MHz Differential HCSL Clock Buffer RoHS : Compliant | 2,946 | ||
| DALC208SC6 | STMicroelectronics | DALC208 Series 4 Channel Bi-Directional Diode Array SMT - SOT-23-6 RoHS : Compliant | 23 | |||
 ComSIT USA | EPF10K30AQC2082 | Altera Corporation | EMBEDDED PROGRAMMABLE LOGIC DEVICE FAMILY Loadable PLD, 0.7ns, CMOS, PQFP208 RoHS : Not Compliant | 626 | ||
| EPF10K30AQC2083N | Altera Corporation | EMBEDDED PROGRAMMABLE LOGIC DEVICE FAMILY Loadable PLD, 0.9ns, CMOS, PQFP208 RoHS : Compliant | 53 | |||
| EPF8820AQC2083 | Altera Corporation | PROGRAMMABLE LOGIC DEVICE Loadable PLD, CMOS, PQFP208 RoHS : Not Compliant | 45 | |||
| EP1K100QC2083 | Intel Corporation | FPGAs ACEX-1K 49152b 2.375V 147 I/O 208-QFP RoHS : Not Compliant | 42 | |||
| EPM7512AEQC20812N | Altera Corporation | PROGRAMMABLE LOGIC DEVICE EE PLD, 12ns, 512-Cell, CMOS, PQFP208 RoHS : Compliant | 24 | |||
| EPF10K50SQC2083N | Altera Corporation | EMBEDDED PROGRAMMABLE LOGIC DEVICE Loadable PLD, 0.5ns, CMOS, PQFP208 RoHS : Compliant | 24 | |||
| EPF8636AQC2082 | Altera Corporation | PROGRAMMABLE LOGIC DEVICE Loadable PLD, CMOS, PQFP208 RoHS : Not Compliant | 20 | |||
| EPM7256AEQC20810N | Altera Corporation | PROGRAMMABLE LOGIC DEVICE EE PLD, 10ns, 256-Cell, CMOS, PQFP208 RoHS : Compliant | 14 | |||
| EP20K160EQC2082 | Altera Corporation | PROGRAMMABLE LOGIC DEVICE Loadable PLD, 1.93ns, CMOS, PQFP208 RoHS : Not Compliant | 6 | |||
| EPF10K40RC2083 | Altera Corporation | EMBEDDED PROGRAMMABLE LOGIC DEVICE FAMILY Loadable PLD, 0.6ns, CMOS, PQFP208 RoHS : Not Compliant | 5 | |||
| EPM7256SRC20810N | Altera Corporation | PROGRAMMABLE LOGIC DEVICE EE PLD, 10ns, 256-Cell, CMOS, PQFP208 RoHS : Compliant | 4 | |||
| EPM7256SRC20815 | Altera Corporation | PROGRAMMABLE LOGIC DEVICE EE PLD, 15ns, 256-Cell, CMOS, PQFP208 RoHS : Not Compliant | 4 | |||
| EPM3256AQC20810N | Altera Corporation | PROGRAMMABLE LOGIC DEVICE EE PLD, 10ns, 256-Cell, CMOS, PQFP208 RoHS : Compliant | 3 | |||
| EPF10K30AQC2082N | Altera Corporation | EMBEDDED PROGRAMMABLE LOGIC DEVICE FAMILY Loadable PLD, 0.7ns, CMOS, PQFP208 RoHS : Compliant | 3 | |||
| EPF10K20RC2083N | Altera Corporation | EMBEDDED PROGRAMMABLE LOGIC DEVICE FAMILY Loadable PLD, 0.5ns, CMOS, PQFP208 RoHS : Compliant | 2 | |||
 Interstate Connecting Components | SP02C-20-8P(362) | Amphenol Aerospace | RECEPT 79-184220-08P | 0 | ||
| SP07C-20-8S(014) | Amphenol Aerospace | RECEPT 88-285722-08S | 0 | |||
| 801-069-26M11-31PC208 | Glenair Inc | RoHS : Compliant | 0 | |||
| 801-069-26NF11-31SC208 | Glenair Inc | RoHS : Not Compliant | 0 | |||
| 804-066-06M14-55SC208 | Glenair Inc | RoHS : Compliant | 0 | |||
| PC02C-20-8P(101) | Amphenol Aerospace | RECEPT 10-151220-08P | 0 | |||
| C20856-P | Glenair Inc | 0 | ||||
| PT00C-20-8S(025) | Amphenol Industrial Operations | RECEPTACLE | 0 | |||
| PT00C-20-8S(476) | Amphenol Industrial Operations | RECEPTACLE | 0 | |||
| SP07C-20-8P(013) | Amphenol Aerospace | RECEPT 87-285722-08P | 0 | |||
| 801-069-26M16-55AC208 | Glenair Inc | RoHS : Compliant | 0 | |||
| 801-069-26NF10-26BC208 | Glenair Inc | 0 | ||||
| PC00C-20-8P(101) | Amphenol Aerospace | RECEPT 10-151020-08P | 0 | |||
| 801-069-26M19-100AC208 | Glenair Inc | RoHS : Compliant | 0 | |||
| 804-066-06M12-37AC208 | Glenair Inc | RoHS : Compliant | 0 | |||
 NexGen Digital | HMC208MS8E | Hittite Microwave Corp | RoHS : Compliant | 661 | ||
| EPF8820ARC208-3 | Altera Corporation | RoHS : Not Compliant | 226 | |||
| EPF8820ARC208-4 | Altera Corporation | RoHS : Not Compliant | 9 | |||
| EPF8820RC208-3 | Altera Corporation | RoHS : Not Compliant | 8 | |||
 PEI Genesis | AIB6FC20-8PC | Amphenol Corporation |
| 0 | ||
| CB6LC20-8SS | ITT Interconnect Solutions |
| 0 | |||
| HE8C208 | Amphenol Socapex |
| 0 | |||
| CB1LC20-8PS | ITT Interconnect Solutions |
| 0 | |||
| CB6FC20-8SS | ITT Interconnect Solutions |
| 0 | |||
| CB6TC20-8SC | ITT Interconnect Solutions |
| 0 | |||
| CB6LC20-8SC | ITT Interconnect Solutions |
| 0 | |||
 Powell Electronics | C2082 | Heyco | LTBP 1500-250 BLACK RoHS : Compliant |
| 19,640 | |
| C2080 | Heyco | LTBP 1375-250 BLACK RoHS : Compliant |
| 11,550 | ||
| SMC-2-08-1-GT | Adam Technologies Inc | MACHINE PIN SOCKET 8P 2.54MM PIT RoHS : Compliant |
| 5,940 | ||
| C2082JJ | Heyco | LTBP 1500-250 LT GRAY 00050047PI |
| 330 | ||
| ALR-LC-208-277 | TE Connectivity | Connectors |
| 176 | ||
| C20821-26WJ37SD | Amphenol Corporation | CONNECTOR |
| 48 | ||
| MEC2-08-01-L-DV-TR | Samtec Inc | BOARD CONNECTOR 8POS 2ROW VERT RoHS : Compliant |
| 33 | ||
| MEC2-08-01-L-DV | Samtec Inc | BOARD CONNECTOR 8POS 2ROW VERT RoHS : Compliant |
| 24 | ||
| 3SBC2087A2 | CII Guardian | MIL/AERO RELAY 3SBC2087A2 |
| 5 | ||
| C20821-20WJ37PN | Amphenol Corporation | CONNECTOR |
| 5 | ||
| MS3102C20-8P | Amphenol Corporation | CONNECTOR |
| 1 | ||
| NK-2C2-085-125-TH00 | AirBorn a molex company | Right Angle SurNace Mount PCB Connector RoHS : Not Compliant |
| 1 | ||
| MC-65A-AC208V | Altech Corporation | Contactor, 3 Pole, 65A |
| 1 | ||
| C20821-26WJ37SA | Amphenol Corporation | CONNECTOR |
| 1 | ||
| C20849-1P | Glenair Inc | CONNECTOR ACCESSORIES |
| 1 | ||
 Richardson RFPD | V23990-P587-C208-PM | Vincotech | Power IGBT Modules RoHS : Compliant | 0 | ||
| DC2085A-E | Analog Devices Inc | LTC2000 DAC Demonstration Circuit RoHS : Compliant |
| 0 | ||
| V23990-P586-C208-PM | Vincotech | POWERIGBT TRANSISTOR RoHS : Compliant | 0 | |||
| 101830-HMC208AMS8 | Analog Devices Inc | HMC208AMS8/HMC208AMS8E Up-Down Converter and Mixer RoHS : Compliant | 0 | |||
| DC2081A-A | Analog Devices Inc | LTM4630EV Demonstration circuit RoHS : Compliant |
| 0 | ||
| DC2089A-A | Analog Devices Inc | LTC3880EUJ DC to DC Controller 0.8VDC to 1.8VDC Ou RoHS : Compliant |
| 0 | ||
| DC2086A | Analog Devices Inc | Powered Programming Adapter Board for Digital Powe RoHS : Compliant |
| 0 | ||
| DC208A-B | Analog Devices Inc | LTC1559CS8-5 Battery Management Demonstration Circ RoHS : Compliant |
| 0 | ||
| DC2081A-B | Analog Devices Inc | LTM4630EY-1 DC to DC Converter and Switching Regul RoHS : Compliant |
| 0 | ||
| DC2085A-F | Analog Devices Inc | LTC2000 DAC Demonstration Circuit RoHS : Compliant |
| 0 | ||
| DC2085A-D | Analog Devices Inc | LTC2000 DAC Demonstration Circuit RoHS : Compliant |
| 0 | ||
| DC2085A-A | Analog Devices Inc | LTC2000-16 DAC Demonstration Circuit 2.5GSPS RoHS : Compliant |
| 0 | ||
| DC2088A | Analog Devices Inc | LTC3880 DC to DC Controller 0.8VDC to 1.8VDC Outpu RoHS : Compliant |
| 0 | ||
| DC2084A | Analog Devices Inc | LTC3884EUK DC to DC Controller 1VDC Output Demonst RoHS : Compliant |
| 0 | ||
| DC2089A-B | Analog Devices Inc | LTC3870EUFD DC to DC Controller 0.8VDC to 1.8VDC O RoHS : Compliant |
| 0 | ||
 Rutronik | ESDALC208 | Diotec Semiconductor AG | ESD ARRAY 6A 9V SOT-26 RoHS : Compliant |
| 24,000 | |
 Chip 1 Exchange | EP20K160EQC208-3 | Altera Corporation | INSTOCK RoHS : Not Compliant | 4,483 | ||
| DALC208SC6 | STMicroelectronics | INSTOCK RoHS : Compliant | 3,242 | |||
| EPF10K50SQC2083 | Altera Corporation | INSTOCK | 288 | |||
| EPM7256AQC208-7 | Altera Corporation | INSTOCK RoHS : Not Compliant | 233 | |||
| EPM3256AQC208-10 | INSTOCK | 168 | ||||
| EPF10K10AQC208-3 | Altera Corporation | INSTOCK RoHS : Not Compliant | 109 | |||
| EPF10K110AQC208 | Altera Corporation | INSTOCK | 72 | |||
| EPF6016AQC2083 | INSTOCK | 36 | ||||
| EPM3256AQC208-7N | Altera Corporation | INSTOCK RoHS : Compliant | 30 | |||
| EPF8636ARC208-4 | INSTOCK | 22 | ||||
| DC208 | INSTOCK | 15 | ||||
| EPF10K20RC2084 | Altera Corporation | INSTOCK | 11 | |||
| 42C2088 | IBM | INSTOCK | 10 | |||
CDC208DW | Texas Instruments | INSTOCK RoHS : Compliant | 5 | |||
| EPF10K100EQC2081 | INSTOCK | 2 | ||||
 Avnet Abacus | AMPMDGC-2.0800 | Abracon Corporation | (Alt: AMPMDGC-2.0800) RoHS : Compliant | 0 | ||
| AMPMGFC-2.0800 | Abracon Corporation | (Alt: AMPMGFC-2.0800) RoHS : Compliant | 0 | |||
| AMPMAGC-2.0800 | Abracon Corporation | (Alt: AMPMAGC-2.0800) RoHS : Compliant | 0 | |||
CBR04C208A3GAC | KEMET Corporation | SMD Multilayer Ceramic Capacitor 02 pF 25 V 0402 1005 Metric 005pF C0G NP0 - Tape and Reel (Alt: CBR04C208A3GAC) RoHS : Compliant | 0 | |||
| AMPMAEC-2.0800 | Abracon Corporation | (Alt: AMPMAEC-2.0800) RoHS : Compliant | 0 | |||
| AMPMEFC-2.0800T | Abracon Corporation | (Alt: AMPMEFC-2.0800T) RoHS : Compliant | 0 | |||
| AMPMDFC-2.0800T | Abracon Corporation | (Alt: AMPMDFC-2.0800T) RoHS : Compliant | 0 | |||
| AMPMAEC-2.0800T3 | Abracon Corporation | (Alt: AMPMAEC-2.0800T3) RoHS : Compliant | 0 | |||
| AMPMADC-2.0800T3 | Abracon Corporation | (Alt: AMPMADC-2.0800T3) RoHS : Compliant | 0 | |||
| AMPMGDC-2.0800T3 | Abracon Corporation | (Alt: AMPMGDC-2.0800T3) RoHS : Compliant | 0 | |||
| AMPMAFC-2.0800T3 | Abracon Corporation | (Alt: AMPMAFC-2.0800T3) RoHS : Compliant | 0 | |||
| CBR06C208B5GACAUTO | KEMET Corporation | (Alt: CBR06C208B5GACAUTO) RoHS : Compliant | 0 | |||
| MEC2-08-01-L-DV-FR | Samtec Inc | (Alt: MEC2-08-01-L-DV-FR) RoHS : Compliant | 0 | |||
| GPHC208-0305A010B1BC | Greenconn Corp | header 2x3pos pitch 254mm SMD (Alt: GPHC208-0305A010B1BC) RoHS : Compliant | 0 | |||
| MEC2-08-01-L-DV-K-TR | Samtec Inc | (Alt: MEC2-08-01-L-DV-K-TR) RoHS : Compliant | 0 | |||
Avnet Asia | PI6C20800SAEX | Diodes Incorporated | Clock Buffer, PCIe Fanout, 95 MHz to 400 MHz, 8 Outputs, 3.135 V to 3.465 V, 48 Pins, TSSOP (Alt: PI6C20800SAEX) RoHS : Compliant | 0 | ||
| CSEC208-0802A001C1AD | Greenconn Corp | Conn Socket Strip RCP 16 POS 1.27mm Solder RA SMD (Alt: CSEC208-0802A001C1AD) RoHS : Compliant | 0 | |||
| GPEC208-0802A110C1ZF | Greenconn Corp | GCTGPEC208-0802A110C1ZF CONNECTOR 1.27 P (Alt: GPEC208-0802A110C1ZF) RoHS : Compliant | 0 | |||
| CSEC208-0302A004C1AH | Greenconn Corp | GCTCSEC208-0302A004C1AH 1.27MM PITCH DAU (Alt: CSEC208-0302A004C1AH) RoHS : Compliant | 0 | |||
 Avnet Silica | DALC208SC6Y | STMicroelectronics | ESD Protection Device SOT23 6 Pins (Alt: DALC208SC6Y) RoHS : Compliant | 21,000 | ||
| PI6C20800SVEX | Diodes Incorporated | Clock Buffer LowOutput Skew 95 MHz to 400 MHz 8 Outputs 3135 V to 3465 V 48 Pins SSOP (Alt: PI6C20800SVEX) RoHS : Compliant | 0 | |||
| PI6C20800SAEX | Diodes Incorporated | Clock Buffer PCIe Fanout 95 MHz to 400 MHz 8 Outputs 3135 V to 3465 V 48 Pins TSSOP (Alt: PI6C20800SAEX) RoHS : Compliant | 0 | |||
| PI6C20800BAEX | Diodes Incorporated | Clock Buffer PCIe Fanout 95 MHz to 400 MHz 8 Outputs 3135 V to 3465 V 48 Pins TSSOP (Alt: PI6C20800BAEX) RoHS : Compliant | 0 | |||
| PI6C20800SIAEX | Diodes Incorporated | Clock Buffer PCIe Fanout 95 MHz to 400 MHz 8 Outputs 3135 V to 3465 V 48 Pins TSSOP (Alt: PI6C20800SIAEX) RoHS : Compliant | 0 | |||
| PI6C20800BIAEX | Diodes Incorporated | Clock Buffer PCIe Fanout 95 MHz to 400 MHz 8 Outputs 3135 V to 3465 V 48 Pins TSSOP (Alt: PI6C20800BIAEX) RoHS : Compliant | 0 | |||
| DSPIC33AK512MC208-I/PT | Microchip Technology Inc | 200MHz 512KB Flash FuSaCompliant HSAnalog HSPWMs Touch (Alt: DSPIC33AK512MC208-I/PT) RoHS : Compliant | 0 | |||
| DSPIC33AK512MC208-E/PT | Microchip Technology Inc | 200 MHZ 512KB FLASH FUSACOMPLIANT HSANALOG HSPWMS TOUCH (Alt: DSPIC33AK512MC208-E/PT) RoHS : Compliant | 0 | |||
 Chip-Germany GmbH | A9C20842 | Schneider Electric | RoHS : Compliant | 2 | ||
 Component Electronics, Inc | EP1K50QC208-1 | Altera Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 163 | |
| EPF6016AQC208-1 | Altera Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 68 | ||
| DALC208SC6 | STMicroelectronics | IN STOCK SHIP TODAY RoHS : Compliant |
| 30 | ||
| EPF10K10QC208-4 | Altera Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 18 | ||
| EPF6016AQC208-2 | Altera Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 10 | ||
| EPF6016AQC208-3 | Altera Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 5 | ||
| EPF6016QC208-3 | Altera Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 4 | ||
| EP1K30QC208-2 | Altera Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 3 | ||
| EPF10K20RC208-3 | Altera Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 3 | ||
| EPF6024AQC208-2 | Altera Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2 | ||
| EPF10K40RC208-4 | Altera Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant | 2 | |||
| EPF10K30AQC208-3 | Altera Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2 | ||
| EPF81188AQC208-2 | Altera Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2 | ||
| EP1K30QC208-3 | Altera Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1 | ||
| MC208B | LOCUS | IN STOCK SHIP TODAY | 1 | |||
 DB Roberts | CM-C208 | Southco | 0 | |||
| C20-832 | PennEngineering (PEM) | 0 | ||||
| C2080 | Heyco | LTBP 1375-250 BLACK RoHS : Compliant | 0 | |||
| C2082 | Heyco | LTBP 1500-250 BLACK RoHS : Compliant | 0 | |||
| C2082JJ | Heyco | LTBP 1500-250 LT GRAY 00050047 | 0 | |||
| C2080-P | Heyco | LTBP 1375-250 BLACK 10PK | 0 | |||
| AE803C2083 | PennEngineering (PEM) | GUN | 0 | |||
| AE803C2083R | PennEngineering (PEM) | REPAIR | 0 | |||
| C2082-P | Heyco | LTBP 1500-250 BLACK 10PK | 0 | |||
 EBV Elektronik | DALC208SC6 | STMicroelectronics | ESD Protection Device Array SOT23 6 Pins 12 V DALC2 (Alt: DALC208SC6) RoHS : Compliant | 342,000 | ||
| DALC208SC6 | STMicroelectronics | ESD Protection Device Array SOT23 6 Pins 12 V DALC2 (Alt: DALC208SC6) RoHS : Compliant | 0 | |||
| DALC208SC6Y | STMicroelectronics | ESD Protection Device SOT23 6 Pins (Alt: DALC208SC6Y) RoHS : Compliant | 0 | |||
| HLMP-C208-S0000 | Broadcom Limited | (Alt: HLMP-C208-S0000) RoHS : Compliant | 0 | |||
| NPC1002A2EV/C208BY | NXP Semiconductors | PHANPC1002A2EVC208BY NFC CONTROLLER (Alt: NPC1002A2EV/C208BY) RoHS : Compliant | 0 | |||
| NPC1002A2EV/C20803 | NXP Semiconductors | Identification Authentication Security ICs (Alt: NPC1002A2EV/C20803) RoHS : Compliant | 0 | |||
| XC208096F66LACKXUMA1 | Infineon Technologies AG | MCU 16Bit XC2000 C166 RISC 768KB Flash 144Pin LQFP TR (Alt: SP000919146) RoHS : Compliant | 0 | |||
| DSPIC33AK512MC208-I/PT | Microchip Technology Inc | 200MHz 512KB Flash FuSaCompliant HSAnalog HSPWMs Touch (Alt: DSPIC33AK512MC208-I/PT) RoHS : Compliant | 0 | |||
 FDH Electronics | C20809-26N2 | Amphenol Cable & Interconnect Technologies | Wire and Cable | 327 | ||
| C20808-26L2 | Amphenol Cable & Interconnect Technologies | Multi-Cond Cbl | 84 | |||
| C20824-1 | FDH Electronics | Placeholder | 12 | |||
| EPF10K30EQC208-3 | FDH Electronics | Semiconductor | 10 | |||
| PC 2086051 | FDH Electronics | Wire Placehldr | 10 | |||
| PC 2087745 | FDH Electronics | Wire Placehldr | 10 | |||
| C20815-3CW08-3 | Glenair Inc | Backshells & Ac | 6 | |||
| C20884-1-3 | Glenair Inc | Connector Acc |
| 6 | ||
| C20815-3DW10-3 | Glenair Inc | Backshells & Ac | 5 | |||
| C20816-3JW12 | Glenair Inc | Backshells & Ac | 1 | |||
| C20828-1 | Glenair Inc | Backshells & Ac |
| 1 | ||
| B07D932BC2-0863 | TE Connectivity | Relays |
| 0 | ||
| C20867-4 | Federal-Mogul Corporation | Harness Mgmt |
| 0 | ||
 Flip Electronics | EPM3256AQC208-10N | Altera Corporation | Stock RoHS : Compliant | 4,590 | ||
| EPM3256AQC208-10 | Altera Corporation | Stock RoHS : Not Compliant | 4,590 | |||
| EPM3256AQC208-7 | Altera Corporation | Stock, Ship Today RoHS : Not Compliant |
| 4,590 | ||
 Maritex | DALC208SC6 | STMicroelectronics | TVS Diodes & ESD Suppressors; DALC208SC6; STMICROELECTRONICS; 5 V; 6; -18 V; 9 V RoHS : Compliant |
| 3,000 | |
| CSFC208-0802A001R1AF B=4.6 W=6.25 | Greenconn Corp | Pin Header; pitch 2.00mm; 2x8 pins; assembly: SMD; female; straight; double row; H=4.3mm |
| 1,573 | ||
| CSFC208-0502A001R1AF B=4.6 W=6.25 | Greenconn Corp | Pin Header; pitch 2.00mm; 2x5 pins; assembly: SMD; female; straight; double row; H=4.3mm |
| 973 | ||
| CSFC208-1302A00R1AF B=4.6 W=6.25 | Greenconn Corp | Pin Header; pitch 2.00mm; 2x13 pins; assembly: SMD; female; straight; double row; H=4.3mm |
| 650 | ||
 Master Electronics | 3SBC2087A2 | TE Connectivity | Military/Aerospace High Performance Relays RoHS : Not Compliant |
| 8 | |
| TRIO3-PS3AC24DC208CIOL | Phoenix Contact | TRIO3-PS/3AC/24DC/20/8C/IOL RoHS : Compliant |
| 3 | ||
| TRIO3-PS1AC24DC208CIOL | Phoenix Contact | Power Supply Push-in DIN Rail Mount TRIO3-PS/1AC/24DC/10/8C/IOL TRIO3 GEN 3 RoHS : Compliant |
| 3 | ||
| F20-AC208V-11 | Panasonic Electronic Components | RoHS : Compliant |
| 1 | ||
| MEC2-08-02-L-DV-NP-WT | Samtec Inc | 2.00 mm Micro Edge Card Socket RoHS : Compliant |
| 0 | ||
| CC20801X | Marathon Special Products | Double Row Top Mounted Cover - Series 2 - 8 Terminals - 01X Print Style - Clear. RoHS : Compliant |
| 0 | ||
| MEC2-08-01-L-DV-K-TR | Samtec Inc | 2.00 mm Mini Edge Card Connector Vertical RoHS : Compliant |
| 0 | ||
| MEC2-08-01-L-DV-FR | Samtec Inc | 2.00 MM MINI EDGE CARD CO RoHS : Compliant |
| 0 | ||
| HL-C208C | Panasonic Electronic Components | MEASURING RANGE: 85 20MM / RoHS : Compliant |
| 0 | ||
| G3JC208BLDC1224 | OMRON Industrial Automation | SOLID STATE RELAY RoHS : Compliant |
| 0 | ||
| MEC2-08-01-L-TH1-NP-WT | Samtec Inc | 2.00 mm Micro Edge Card Socket RoHS : Compliant |
| 0 | ||
| ECM-B3M-C20807SB1 | Delta Power | RoHS : Compliant |
| 0 | ||
| MEC2-08-02-L-TH1-NP-WT | Samtec Inc | 2.00 MM MINI EDGE CARD CO RoHS : Compliant |
| 0 | ||
| MEC2-08-01-L-DV-WT | Samtec Inc | 2.00 mm Mini Edge Card Connector Vertical RoHS : Compliant |
| 0 | ||
| MEC2-08-02-L-DV-WT-TR | Samtec Inc | 2.00 mm Mini Edge Card Connector Vertical RoHS : Compliant |
| 0 | ||
 Neutron USA | ECM-B3M-C20807RS1 | Delta Electronics Inc | Positional Rotation AC Motor Servomotor 3000 RPM 750W Incremental 220VAC |
| 1 | |
| MC-40A-AC208V | Altech Corporation | Contactors - Electromechanical Contactor, 3 Pole, 40A |
| 1 | ||
| GMC-12M-10-AC208V | Altech Corporation | Contactors - Electromechanical MINI CONTACTOR,12A/380/440V |
| 0 | ||
| MC-32A-AC208V | Altech Corporation | Contactors - Electromechanical Contactor, 3 Pole, 32A |
| 0 | ||
 Pasternack Enterprises US | PE3C2080LF-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. N Male to N Male Low Loss Cable 300 Inch Length Using LMR-400-UF Coax with Times Microwave Components, LF Solder., Radio frequency assembly N male to N male low loss cable 300 inch length using LMR-400-UF coax with Times Microwave components, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 300 inch length using LMR-400-UF coax with Times Microwave components, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and N type cable connection on the other. Our low loss type N to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C2080LF-300 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to N type plug cable assembly PE3C2080LF-300 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 300 inch length using LMR-400-UF coax with Times Microwave components, LF solder. |
| 1,689 | |
| PE3C2080LF/HS-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 120 inches. N Male to N Male Low Loss Cable 120 Inch Length Using LMR-400-UF Coax with Times Microwave Components with HeatShrink, LF Solder., Radio frequency assembly N male to N male low loss cable 120 inch length using LMR-400-UF coax with Times Microwave components with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 120 inch length using LMR-400-UF coax with Times Microwave components with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and male on end 2. PE3C2080LF/HS-120 can also be known as a low loss N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3C2080LF/HS-120 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 120 inch length using LMR-400-UF coax with Times Microwave components with heatshrink, LF solder. |
| 794 | ||
| PE3C2080LF/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to N Male Low Loss Cable 36 Inch Length Using LMR-400-UF Coax with Times Microwave Components with HeatShrink, LF Solder., Radio frequency assembly N male to N male low loss cable 36 inch length using LMR-400-UF coax with Times Microwave components with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 36 inch length using LMR-400-UF coax with Times Microwave components with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C2080LF/HS-36 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3C2080LF/HS-36 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 36 inch length using LMR-400-UF coax with Times Microwave components with heatshrink, LF solder. |
| 794 | ||
| PE3C2080LF/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to N Male Low Loss Cable 12 Inch Length Using LMR-400-UF Coax with Times Microwave Components with HeatShrink, LF Solder., Radio frequency assembly N male to N male low loss cable 12 inch length using LMR-400-UF coax with Times Microwave components with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 12 inch length using LMR-400-UF coax with Times Microwave components with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C2080LF/HS-12 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3C2080LF/HS-12 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 12 inch length using LMR-400-UF coax with Times Microwave components with heatshrink, LF solder. |
| 794 | ||
| PE3C2080/HS-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 120 inches. N Male to N Male Low Loss Cable 120 Inch Length Using LMR-400-UF Coax With Times Microwave Components with HeatShrink., Radio frequency assembly N male to N male low loss cable 120 inch length using LMR-400-UF coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 120 inch length using LMR-400-UF coax with Times Microwave components with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and male on end 2. PE3C2080/HS-120 can also be known as a low loss type N plug to N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3C2080/HS-120 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 120 inch length using LMR-400-UF coax with Times Microwave components with heatshrink. |
| 794 | ||
| PE3C2080LF-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to N Male Low Loss Cable 12 Inch Length Using LMR-400-UF Coax with Times Microwave Components, LF Solder., Radio frequency assembly N male to N male low loss cable 12 inch length using LMR-400-UF coax with Times Microwave components, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 12 inch length using LMR-400-UF coax with Times Microwave components, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and N type cable connection on the other. Our low loss type N to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C2080LF-12 can also be known as a low loss N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3C2080LF-12 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 12 inch length using LMR-400-UF coax with Times Microwave components, LF solder. |
| 794 | ||
| PE3C2080-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to N Male Low Loss Cable 12 Inch Length Using LMR-400-UF Coax with Times Microwave Components., Radio frequency assembly N male to N male low loss cable 12 inch length using LMR-400-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 12 inch length using LMR-400-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C2080-12 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2080-12 RF cable has a TPE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C2080-12 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 760 | ||
| PE3C2080-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Male Low Loss Cable 60 Inch Length Using LMR-400-UF Coax with Times Microwave Components., Radio frequency assembly N male to N male low loss cable 60 inch length using LMR-400-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 60 inch length using LMR-400-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C2080-60 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2080-60 RF cable has a TPE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C2080-60 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 760 | ||
| PE3C2080-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. N Male to N Male Low Loss Cable 300 Inch Length Using LMR-400-UF Coax with Times Microwave Components., Radio frequency assembly N male to N male low loss cable 300 inch length using LMR-400-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 300 inch length using LMR-400-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C2080-300 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2080-300 RF cable has a TPE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C2080-300 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 151 | ||
| PE3C2082 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Right Angle Low Loss Cable Using LMR-100 Coax., Radio frequency assembly SMA male to SMA male right angle low loss cable using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male right angle low loss cable using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and right angle a SMA cable connection on the other. Our low loss a SMA to right angle a SMA cable assembly has male gender on end 1 and male on end 2. PE3C2082 can also be known as a low loss SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2082 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to SMA plug cable assembly PE3C2082 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2082 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3C2082-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male to SMA Male Right Angle Low Loss Cable 100 cm Length Using LMR-100 Coax., Radio frequency assembly SMA male to SMA male right angle low loss cable 100 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male right angle low loss cable 100 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and right angle a SMA cable connection on the other. Our low loss a SMA to right angle a SMA cable assembly has male gender on end 1 and male on end 2. PE3C2082-100CM can also be known as a low loss SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2082-100CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to SMA plug cable assembly PE3C2082-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2082-100CM can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C2082/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Right Angle Low Loss Cable Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA male to SMA male right angle low loss cable using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male right angle low loss cable using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our low loss SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C2082/HS can also be known as a low loss SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C2082/HS is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2082/HS can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle low loss cable using LMR-100 coax with heatshrink. | 0 | |||
| PE3C2081 | Pasternack Enterprises | 0 | ||||
| PE3C2080/HS2 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using LMR-400-UF Coax with Double HeatShrink., Radio frequency assembly N male to N male cable using LMR-400-UF coax with double heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male cable using LMR-400-UF coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our type N to N type cable assemblies have a male gender on end 1 and male on end 2. This type N to type N cable is a male to male coax assembly, PE3C2080/HS2, can also be known as a N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3C2080/HS2 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male cable using LMR-400-UF coax with double heatshrink. | 0 | |||
| PE3C2082LF/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMA Male Right Angle Low Loss Cable 36 Inch Length Using LMR-100 Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to SMA male right angle low loss cable 36 inch length using LMR-100 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male right angle low loss cable 36 inch length using LMR-100 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and right angle a SMA cable connection on the other. Our low loss a SMA to right angle a SMA cable assembly has male gender on end 1 and male on end 2. PE3C2082LF/HS-36 can also be known as a low loss SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2082LF/HS-36 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to SMA plug cable assembly PE3C2082LF/HS-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2082LF/HS-36 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
 TE Connectivity | H53C208NN00000100000 | TE Connectivity | 723 HTEC RECEPTACLE, SPEEDTEC Number of Positions: 10 Connector Product Type: Connector Assembly Operating Voltage: 850 VDC 50 VDC Connector System: Cable-to-Panel Sealable: No Ampseal Header | 10 Connector Assembly 850 VDC Cable-to-Panel | TE Connectivity RoHS : Compliant |
| 36 | |
 Venkel Ltd. | TFCR0805-10W-C-2083BT-1K | VENKEL LTD | Thin Film CR;0805;1/10W;�50PPM;208K ;�0.1% RoHS : Compliant | 0 | ||
| TFCR0805-8W-C-2081DT | VENKEL LTD | Thin Film CR;0805;1/8W;�50PPM;2.08K;�0.5% RoHS : Compliant | 0 | |||
| TFCR0805-8W-C-2082BT-1K | VENKEL LTD | Thin Film CR;0805;1/8W;�50PPM;20.8K;�0.1% RoHS : Compliant | 0 | |||
| TFCR2512-2W-C-2080BT | VENKEL LTD | Thin Film CR;2512;1/2W;�50PPM;208R;�0.1% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-2082CT | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;20.8K;�0.25% RoHS : Compliant | 0 | |||
| TFCR0603-10W-C-2082CT-1K | VENKEL LTD | Thin Film CR;0603;1/10W;�50PPM;20.8K;�0.25% RoHS : Compliant | 0 | |||
| TFCR0805-10W-C-2080FT | VENKEL LTD | Thin Film CR;0805;1/10W;�50PPM;208R;�1% RoHS : Compliant | 0 | |||
| TFCR1206-4W-C-2080DT-1K | VENKEL LTD | Thin Film CR;1206;1/4W;�50PPM;208R;�0.5% RoHS : Compliant | 0 | |||
| TFCR1206-4W-C-2083DT | VENKEL LTD | Thin Film CR;1206;1/4W;�50PPM;208K ;�0.5% RoHS : Compliant | 0 | |||
| TFCR1206-8W-C-2082DT-1K | VENKEL LTD | Thin Film CR;1206;1/8W;�50PPM;20.8K;�0.5% RoHS : Compliant | 0 | |||
| TFCR2010-4W-C-2080DT-1K | VENKEL LTD | Thin Film CR;2010;1/4W;�50PPM;208R;�0.5% RoHS : Compliant | 0 | |||
| TFCR0805-10W-C-2080DT-1K | VENKEL LTD | Thin Film CR;0805;1/10W;�50PPM;208R;�0.5% RoHS : Compliant | 0 | |||
| TFCR0805-8W-C-2080DT | VENKEL LTD | Thin Film CR;0805;1/8W;�50PPM;208R;�0.5% RoHS : Compliant | 0 | |||
| TFCR1210-4W-C-2082BT-1K | VENKEL LTD | Thin Film CR;1210;1/4W;�50PPM;20.8K;�0.1% RoHS : Compliant | 0 | |||
| TFCR2512-2W-C-2084FT-1K | VENKEL LTD | Thin Film CR;2512;1/2W;�50PPM;2.08M;�1% RoHS : Compliant | 0 | |||
 Vyrian | CDC208DB | Texas Instruments | 8,278 | |||
| CDC208NSRG4 | Texas Instruments | Low Skew Clock Driver, 208 Series, 4 True Output(s), 0 Inverted Output(s), CMOS, PDSO20 RoHS : Compliant | 7,618 | |||
| EPM9320ARC208-10N | Intel / Altera | EE PLD, 10.8ns, CMOS, PQFP208 | 3,661 | |||
| EPF8636AQC208-A-2 | Altera Corporation | Loadable PLD, 1.7ns, CMOS, PQFP208 | 3,467 | |||
| SNCDC208DW | Texas Instruments | Low Skew Clock Driver, ACT Series, 4 True Output(s), 0 Inverted Output(s), CMOS, PDSO20 | 3,245 | |||
| EPF8820ARC208-2H | Intel / Altera | Loadable PLD, CMOS, PQFP208 | 3,008 | |||
| EP20K200RC208-2V | Intel / Altera | Loadable PLD, 0.4ns, CMOS, PQFP208 | 2,480 | |||
| EPM7256BQC208 | Intel / Altera | EE PLD, 5ns, CMOS, PQFP208 | 2,233 | |||
| EPF10K50EQC208-2 | Intel / Altera | Loadable PLD, 0.6ns, CMOS, PQFP208 | 2,172 | |||
| EPF8820AQC208-3N | Intel Corporation | Loadable PLD, CMOS, PQFP208 RoHS : Compliant | 1,903 | |||
| EPF10K100EQC208-2X | Intel Corporation | Loadable PLD, 0.5ns, CMOS, PQFP208 RoHS : Not Compliant | 1,813 | |||
| EPF81188ARC208-4 | Altera Corporation | Loadable PLD, CMOS, PQFP208 | 1,488 | |||
| EPF10K20QC208-4 | Intel / Altera | Loadable PLD, 20ns, CMOS, PQFP208 | 1,481 | |||
| EPF10K100EPC208-1 | Altera Corporation | Loadable PLD, 9ns, CMOS, PQFP208 RoHS : Unknown | 1,474 | |||
| EPF10K30ARC208-1 | Altera Corporation | Loadable PLD, 11ns, CMOS, PQFP208 | 1,335 | |||
 Waytek, Inc. | C2082 | Heyco | Heyco C2082 liquid-tight hole plug is a sealing panel plug sized for a 1.500" opening to close unused liquid-tight conduit entry holes. Its sealing design supports secure retention, moisture resistance, and cleaner enclosure protection in electrical and equipment applications. RoHS : Compliant |
| 1,252 | |
| C2080 | Heyco | Heyco C2080 liquid-tight hole plug is a sealing panel plug sized for a 1.375" opening to close unused liquid-tight conduit entry holes. Its sealing design supports secure retention, moisture resistance, and cleaner enclosure protection in electrical and equipment applications. RoHS : Compliant |
| 0 | ||
 Win Source Electronics | CAT24C208WI-GT3 | onsemi | IC EEPROM 8KBIT 400KHZ 8SOIC RoHS : Compliant |
| 6,000 | |
| EP1K50QC208-3N | Altera Corporation | IC FPGA 147 I/O 208QFP RoHS : Compliant |
| 3,870 | ||
| EPF6016QC208-2 | Altera Corporation | IC FPGA 171 I/O 208QFP RoHS : Not Compliant |
| 3,074 | ||
| EPM3256AQC208-10N | Altera Corporation | IC CPLD 256MC 10NS 208QFP / CPLD MAX® 3000A Family 5K Gates 256 Macro Cells 95.2MHz 3.3V 208-Pin PQFP Tray RoHS : Compliant |
| 3,000 | ||
| EPM3256AQC208-10 | Altera Corporation | CPLD MAX® 3000A Family 5K Gates 256 Macro Cells 95.2MHz 3.3V 208-Pin PQFP Tray / IC CPLD 256MC 10NS 208QFP RoHS : Not Compliant |
| 2,588 | ||
| EPM3512AQC208-10N | Altera Corporation | IC CPLD 512MC 10NS 208QFP / CPLD MAX® 3000A Family 10K Gates 512 Macro Cells 87MHz 3.3V 208-Pin PQFP Tray RoHS : Compliant |
| 2,000 | ||
| EPF10K20RC208-4N | Altera Corporation | IC FPGA 147 I/O 208RQFP RoHS : Compliant |
| 1,500 | ||
| EP1K10QC208-3N | Altera Corporation | FPGA ACEX 1K Family 10K Gates 576 Cells 200MHz 0.22um Technology 2.5V 208-Pin PQFP / IC FPGA 120 I/O 208QFP RoHS : Compliant |
| 1,500 | ||
| EPM7256AEQC208-10 | Altera Corporation | IC CPLD 256MC 10NS 208QFP RoHS : Not Compliant |
| 1,295 | ||
| HMC208AMS8 | Analog Devices Inc | IC MIXER DBL-BAL 0.7-2GHZ 8-MSOP / RF Mixer IC General Purpose Up/Down Converter 700MHz ~ 2GHz 8-MSOP RoHS : Not Compliant |
| 796 | ||
| EPM7256SRC208-7N | Altera Corporation | IC CPLD 256MC 7.5NS 208RQFP RoHS : Compliant |
| 600 | ||
| EPF10K30RC208-3 | Altera Corporation | IC FPGA 147 I/O 208RQFP RoHS : Not Compliant |
| 444 | ||
| EP1K100QC208-2 | Intel Corporation | IC FPGA 147 I/O 208QFP RoHS : Not Compliant |
| 200 | ||
| EP1K100QC208-2N | Altera Corporation | IC FPGA 147 I/O 208QFP RoHS : Compliant |
| 180 | ||
| EPM7256SQC208-10 | Altera Corporation | IC CPLD 256MC 10NS 208QFP RoHS : Not Compliant |
| 38 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Spanish ▼ 
English
Chinese
German
Japanese
Russian
Korean
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand