A24FCX-R Price, Reseller, Stock

Key Specifications, Connector 1 Series: TRS Subminiature, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm. TRS Subminiature 3-Slot Solder/Clamp Plug to TRB 3-Slot Solder/Clamp Plug M17/176-00002 .129 O.D. Cable., Radio frequency assembly TRS subminiature 3-Slot solder/clamp plug to TRB 3-Slot solder/clamp plug M17/176-00002 .129 O.D. cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRS subminiature 3-Slot solder/clamp plug to TRB 3-Slot solder/clamp plug M17/176-00002 .129 O.D. cable, TRS subminiature cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRS subminiature to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRS subminiature cable connection on one end and TRB cable connection on the other. Our 1553 TRS subminiature to TRB cable assemblies have a plug gender on end 1 and plug on end 2. PE3CA2414 can also be known as a 1553 TRS subminiature male to TRB male cable assembly and will be shipped same-day as it is purchased. TRS subminiature male to TRB male cable assembly PE3CA2414 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRS Subminiature cable assembly is manufactured with TRS subminiature to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRS subminiature plug to TRB plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA2414 can also be used in the other direction and will be TRB plug to TRS subminiature plug cable assembly if the opposite connectivity is required. 1553 TRS subminiature male to TRB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRS subminiature to TRB cable assembly for quick shipment worldwide. Variations of TRS subminiature cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRS subminiature 3-Slot solder/clamp plug to TRB 3-Slot solder/clamp plug M17/176-00002 .129 O.D. cable.

PE3CA2414-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: TRS Subminiature, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. TRS Subminiature 3-Slot Solder/Clamp Plug to TRB 3-Slot Solder/Clamp Plug M17/176-00002 .129 O.D. 48" Cable., Radio frequency assembly TRS subminiature 3-Slot solder/clamp plug to TRB 3-Slot solder/clamp plug M17/176-00002 .129 O.D. 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRS subminiature 3-Slot solder/clamp plug to TRB 3-Slot solder/clamp plug M17/176-00002 .129 O.D. 48" cable, TRS subminiature cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRS subminiature to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRS subminiature cable connection on one end and TRB cable connection on the other. Our 1553 TRS subminiature to TRB cable assemblies have a plug gender on end 1 and plug on end 2. PE3CA2414-48 can also be known as a 1553 TRS subminiature male to TRB male cable assembly and will be shipped same-day as it is purchased. TRS subminiature male to TRB male cable assembly PE3CA2414-48 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRS Subminiature cable assembly is manufactured with TRS subminiature to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRS subminiature plug to TRB plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA2414-48 can also be used in the other direction and will be TRB plug to TRS subminiature plug cable assembly if the opposite connectivity is required. 1553 TRS subminiature male to TRB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRS subminiature to TRB cable assembly for quick shipment worldwide. Variations of TRS subminiature cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRS subminiature 3-Slot solder/clamp plug to TRB 3-Slot solder/clamp plug M17/176-00002 .129 O.D. 48" cable.

1 : $285.99
25 : $271.69
50 : $257.39
100 : $245.95

PE3CA2414-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: TRS Subminiature, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 60 inches. TRS Subminiature 3-Slot Solder/Clamp Plug to TRB 3-Slot Solder/Clamp Plug M17/176-00002 .129 O.D. 60" Cable., Radio frequency assembly TRS subminiature 3-Slot solder/clamp plug to TRB 3-Slot solder/clamp plug M17/176-00002 .129 O.D. 60" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRS subminiature 3-Slot solder/clamp plug to TRB 3-Slot solder/clamp plug M17/176-00002 .129 O.D. 60" cable, TRS subminiature cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRS subminiature to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRS subminiature cable connection on one end and TRB cable connection on the other. Our 1553 TRS subminiature to TRB cable assemblies have a plug gender on end 1 and plug on end 2. PE3CA2414-60 can also be known as a 1553 TRS subminiature male to TRB male cable assembly and will be shipped same-day as it is purchased. TRS subminiature male to TRB male cable assembly PE3CA2414-60 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRS Subminiature cable assembly is manufactured with TRS subminiature to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRS subminiature plug to TRB plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA2414-60 can also be used in the other direction and will be TRB plug to TRS subminiature plug cable assembly if the opposite connectivity is required. 1553 TRS subminiature male to TRB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRS subminiature to TRB cable assembly for quick shipment worldwide. Variations of TRS subminiature cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRS subminiature 3-Slot solder/clamp plug to TRB 3-Slot solder/clamp plug M17/176-00002 .129 O.D. 60" cable.

1 : $337.99
25 : $321.09
50 : $304.19
100 : $290.67

PE3CA2414-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: TRS Subminiature, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 24 inches. TRS Subminiature 3-Slot Solder/Clamp Plug to TRB 3-Slot Solder/Clamp Plug M17/176-00002 .129 O.D. 24" Cable., Radio frequency assembly TRS subminiature 3-Slot solder/clamp plug to TRB 3-Slot solder/clamp plug M17/176-00002 .129 O.D. 24" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRS subminiature 3-Slot solder/clamp plug to TRB 3-Slot solder/clamp plug M17/176-00002 .129 O.D. 24" cable, TRS subminiature cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRS subminiature to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRS subminiature cable connection on one end and TRB cable connection on the other. Our 1553 TRS subminiature to TRB cable assemblies have a plug gender on end 1 and plug on end 2. PE3CA2414-24 can also be known as a 1553 TRS subminiature male to TRB male cable assembly and will be shipped same-day as it is purchased. TRS subminiature male to TRB male cable assembly PE3CA2414-24 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRS Subminiature cable assembly is manufactured with TRS subminiature to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRS subminiature plug to TRB plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA2414-24 can also be used in the other direction and will be TRB plug to TRS subminiature plug cable assembly if the opposite connectivity is required. 1553 TRS subminiature male to TRB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRS subminiature to TRB cable assembly for quick shipment worldwide. Variations of TRS subminiature cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRS subminiature 3-Slot solder/clamp plug to TRB 3-Slot solder/clamp plug M17/176-00002 .129 O.D. 24" cable.

1 : $191.99
25 : $182.39
50 : $172.79
100 : $165.11

PE3CA2414-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: TRS Subminiature, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. TRS Subminiature 3-Slot Solder/Clamp Plug to TRB 3-Slot Solder/Clamp Plug M17/176-00002 .129 O.D. 12" Cable., Radio frequency assembly TRS subminiature 3-Slot solder/clamp plug to TRB 3-Slot solder/clamp plug M17/176-00002 .129 O.D. 12" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRS subminiature 3-Slot solder/clamp plug to TRB 3-Slot solder/clamp plug M17/176-00002 .129 O.D. 12" cable, TRS subminiature cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRS subminiature to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRS subminiature cable connection on one end and TRB cable connection on the other. Our 1553 TRS subminiature to TRB cable assemblies have a plug gender on end 1 and plug on end 2. PE3CA2414-12 can also be known as a 1553 TRS subminiature male to TRB male cable assembly and will be shipped same-day as it is purchased. TRS subminiature male to TRB male cable assembly PE3CA2414-12 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRS Subminiature cable assembly is manufactured with TRS subminiature to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRS subminiature plug to TRB plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA2414-12 can also be used in the other direction and will be TRB plug to TRS subminiature plug cable assembly if the opposite connectivity is required. 1553 TRS subminiature male to TRB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRS subminiature to TRB cable assembly for quick shipment worldwide. Variations of TRS subminiature cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRS subminiature 3-Slot solder/clamp plug to TRB 3-Slot solder/clamp plug M17/176-00002 .129 O.D. 12" cable.

1 : $181.99
25 : $172.89
50 : $163.79
100 : $156.51

PE3FCA249-15M

Pasternack Enterprises

Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber SC UPC to SC UPC, OS2 Single Mode Indoor Distribution Cable, 4.5mm Riser, 2.0mm breakout, Yellow-15M. Pasternack’s PE3FCA249-15M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 15-meter long 4-fiber cable assembly is equipped with SC/UPC to SC/UPC connectors. Our yellow fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 4-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA249-15M fiber optic cable with a 4.5 mm cable diameter and 34 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of SC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.

1 : $145.99
5 : $140.15
10 : $134.31
25 : $128.47

PE3FCA249-30M

Pasternack Enterprises

Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber SC UPC to SC UPC, OS2 Single Mode Indoor Distribution Cable, 4.5mm Riser, 2.0mm breakout, Yellow-30M. Pasternack’s PE3FCA249-30M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 30-meter long 4-fiber cable assembly is equipped with SC/UPC to SC/UPC connectors. Our yellow fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 4-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA249-30M fiber optic cable with a 4.5 mm cable diameter and 34 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of SC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.

1 : $153.99
5 : $147.83
10 : $141.67
25 : $135.51

PE3FCA249

Pasternack Enterprises

Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber SC UPC to SC UPC, OS2 Single Mode Indoor Distribution Cable, 4.5mm Riser, 2.0mm breakout, Yellow. Pasternack’s PE3FCA249 fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 4-fiber cable assembly is equipped with SC/UPC to SC/UPC connectors. Our yellow fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 4-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA249 fiber optic cable with a 4.5 mm cable diameter and 34 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of SC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.

PE39344A-24

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Female to Black FAKRA Plug Cable 24 Inch Length Using PE-C100-LSZH Coax., Radio frequency assembly SMA female to black FAKRA plug cable 24 inch length using PE-C100-LSZH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA female to black FAKRA plug cable 24 inch length using PE-C100-LSZH coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and FAKRA cable connection on the other. Our low loss SMA to FAKRA cable assemblies have a female gender on end 1 and plug on end 2. This SMA to FAKRA cable is a female to plug coax assembly, PE39344A-24, can also be known as a low loss SMA jack to FAKRA male cable assembly and will be shipped same-day as it is purchased. SMA jack to FAKRA male cable assembly PE39344A-24 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to FAKRA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA female to FAKRA plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE39344A-24 can also be used in the other direction and will be FAKRA plug to SMA female cable assembly if the opposite connectivity is required. Low loss SMA jack to FAKRA male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to FAKRA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to black FAKRA plug cable 24 inch length using PE-C100-LSZH coax.

1 : $46.19
25 : $43.88
50 : $41.57
100 : $39.72

PE3FCA249-10M

Pasternack Enterprises

Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber SC UPC to SC UPC, OS2 Single Mode Indoor Distribution Cable, 4.5mm Riser, 2.0mm breakout, Yellow-10M. Pasternack’s PE3FCA249-10M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long 4-fiber cable assembly is equipped with SC/UPC to SC/UPC connectors. Our yellow fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 4-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA249-10M fiber optic cable with a 4.5 mm cable diameter and 34 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of SC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.

1 : $141.99
5 : $136.31
10 : $130.63
25 : $124.95

PE38749A-24

Pasternack Enterprises

Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length: 24 inches. Black FAKRA Plug to FAKRA Jack Right Angle Cable 24 Inch Length Using PE-C100-LSZH Coax., Radio frequency assembly black FAKRA plug to FAKRA jack right angle cable 24 inch length using PE-C100-LSZH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. Black FAKRA plug to FAKRA jack right angle cable 24 inch length using PE-C100-LSZH coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with FAKRA cable connection on one end and right angle FAKRA cable connection on the other. Our low loss FAKRA to right angle FAKRA cable assemblies have a plug gender on end 1 and jack on end 2. This FAKRA to FAKRA cable is a plug to jack coax assembly, PE38749A-24, can also be known as a low loss FAKRA male to right angle FAKRA female cable assembly and will be shipped same-day as it is purchased. FAKRA male to FAKRA female cable assembly PE38749A-24 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to right angle FAKRA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this FAKRA plug to FAKRA right angle jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE38749A-24 can also be used in the other direction and will be right angle FAKRA jack to FAKRA plug cable assembly if the opposite connectivity is required. Low loss FAKRA male to FAKRA right angle female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to FAKRA cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this black FAKRA plug to FAKRA jack right angle cable 24 inch length using PE-C100-LSZH coax.

1 : $39.59
25 : $37.61
50 : $35.63
100 : $34.05

PE3FCA247-30M

Pasternack Enterprises

Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber SC UPC to SC UPC, OS2 Single Mode Indoor Distribution Cable, 4.5mm Plenum, 2.0mm breakout, Yellow-30M. Pasternack’s PE3FCA247-30M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 30-meter long 4-fiber cable assembly is equipped with SC/UPC to SC/UPC connectors. Our yellow fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 4-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA247-30M fiber optic cable with a 4.5 mm cable diameter and 34 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of SC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.

1 : $159.99
5 : $153.59
10 : $147.19
25 : $140.79

PE3FCA247-25M

Pasternack Enterprises

Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber SC UPC to SC UPC, OS2 Single Mode Indoor Distribution Cable, 4.5mm Plenum, 2.0mm breakout, Yellow-25M. Pasternack’s PE3FCA247-25M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 25-meter long 4-fiber cable assembly is equipped with SC/UPC to SC/UPC connectors. Our yellow fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 4-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA247-25M fiber optic cable with a 4.5 mm cable diameter and 34 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of SC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.

1 : $155.99
5 : $149.75
10 : $143.51
25 : $137.27

PE39347A-24

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Male to Black FAKRA Jack Cable 24 Inch Length Using PE-C100-LSZH Coax., Radio frequency assembly SMA male to black FAKRA jack cable 24 inch length using PE-C100-LSZH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to black FAKRA jack cable 24 inch length using PE-C100-LSZH coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and FAKRA cable connection on the other. Our low loss SMA to FAKRA cable assemblies have a male gender on end 1 and jack on end 2. This SMA to FAKRA cable is a male to jack coax assembly, PE39347A-24, can also be known as a low loss SMA plug to FAKRA female cable assembly and will be shipped same-day as it is purchased. SMA plug to FAKRA female cable assembly PE39347A-24 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to FAKRA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE39347A-24 can also be used in the other direction and will be FAKRA jack to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to FAKRA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to black FAKRA jack cable 24 inch length using PE-C100-LSZH coax.

1 : $42.19
25 : $40.08
50 : $37.97
100 : $36.28

PE38747A-24

Pasternack Enterprises

Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length: 24 inches. Black FAKRA Plug to FAKRA Plug Cable 24 Inch Length Using PE-C100-LSZH Coax., Radio frequency assembly black FAKRA plug to FAKRA plug cable 24 inch length using PE-C100-LSZH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. Black FAKRA plug to FAKRA plug cable 24 inch length using PE-C100-LSZH coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with FAKRA cable connection on one end and FAKRA cable connection on the other. Our low loss FAKRA to FAKRA cable assemblies have a plug gender on end 1 and plug on end 2. This FAKRA to FAKRA cable is a plug to plug coax assembly, PE38747A-24, can also be known as a low loss FAKRA male to FAKRA male cable assembly and will be shipped same-day as it is purchased. FAKRA male to FAKRA male cable assembly PE38747A-24 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to FAKRA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency FAKRA plug to FAKRA plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss FAKRA male to FAKRA male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to FAKRA cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this black FAKRA plug to FAKRA plug cable 24 inch length using PE-C100-LSZH coax.

1 : $26.79
25 : $25.45
50 : $24.11
100 : $23.04

TE Connectivity

RQ73C2A24K3BTD

TE Connectivity

RQ 0805 24K3 0.1% 10PPM 5K RL Resistance Value: 24.3K Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0805 Surface Mount Resistor | 24.3K Ω Thin Film Precision Resistor .1 % | Part Number: RQ73C2A24K3BTD | Internal Number: 2-2176381-9 | TE Connectivity
RoHS : Compliant

2,500 : $0.65
1,000 : $0.67
500 : $0.69
250 : $0.71
100 : $0.72
50 : $0.74
25 : $0.76
10 : $0.78
1 : $0.79

5,349

RQ73C2A24K9BTD

TE Connectivity

RQ 0805 24K9 0.1% 10PPM 5K RL Resistance Value: 24.9K Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0805 Surface Mount Resistor | 24.9K Ω Thin Film Precision Resistor .1 % | Part Number: RQ73C2A24K9BTD | Internal Number: 3-2176381-0 | TE Connectivity
RoHS : Compliant

2,500 : $0.65
1,000 : $0.67
500 : $0.69
250 : $0.71
100 : $0.72
50 : $0.74
25 : $0.76
10 : $0.78
1 : $0.79

4,849

RN73C2A249RBTD

TE Connectivity

RN 0805 249R 0.1% 10PPM 5KRL Resistance Value: 249 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0805 Surface Mount Resistor | 249 Ω Thin Film Precision Resistor .1 % | Part Number: RN73C2A249RBTD | Internal Number: 1676264-3 | TE Connectivity
RoHS : Compliant

2,500 : $0.64
1,000 : $0.66
500 : $0.67
250 : $0.69
100 : $0.71
50 : $0.73
25 : $0.74
10 : $0.76
1 : $0.78

3,852

RN73C2A249KBTDF

TE Connectivity

RN 0805 249K 0.1% 10PPM 1K RL Resistance Value: 249K Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0805 Surface Mount Resistor | 249K Ω Thin Film Precision Resistor .1 % | Part Number: RN73C2A249KBTDF | Internal Number: 6-1879028-7 | TE Connectivity
RoHS : Compliant

500 : $0.99
250 : $1.03
100 : $1.06
50 : $1.1
25 : $1.13
10 : $1.17
1 : $1.2

3,704

RN73C2A24R3BTDF

TE Connectivity

RN 0805 24R3 0.1% 10PPM 1K RL Resistance Value: 24.3 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0805 Surface Mount Resistor | 24.3 Ω Thin Film Precision Resistor .1 % | Part Number: RN73C2A24R3BTDF | Internal Number: 1676673-2 | TE Connectivity
RoHS : Compliant

500 : $0.99
250 : $1.03
100 : $1.06
50 : $1.1
25 : $1.13
10 : $1.17
1 : $1.2

2,083

RP73PF2A243KBTDF

TE Connectivity

RP 2A 0.25W 243K 0.1% 25PPM 1K RL Part Number: RP73PF2A243KBTDF | Internal Number: 3-2176094-0 | TE Connectivity
RoHS : Compliant

500 : $0.49
250 : $0.51
100 : $0.52
50 : $0.54
25 : $0.56
10 : $0.57
1 : $0.59

894

RP73PF2A24K9BTDF

TE Connectivity

RP 2A 0.25W 24K9 0.1% 25PPM 1K RL Resistance Value: 24.9K Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0805 Surface Mount Resistor | 24.9K Ω Thin Film Precision Resistor .1 % | Part Number: RP73PF2A24K9BTDF | Internal Number: 4-2176093-0 | TE Connectivity
RoHS : Compliant

500 : $0.42
250 : $0.43
100 : $0.44
50 : $0.46
25 : $0.47
10 : $0.49
1 : $0.5

783

RN73C2A243KBTDF

TE Connectivity

RN 0805 243K 0.1% 10PPM 1K RL Resistance Value: 243K Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0805 Surface Mount Resistor | 243K Ω Thin Film Precision Resistor .1 % | Part Number: RN73C2A243KBTDF | Internal Number: 6-1879028-6 | TE Connectivity
RoHS : Compliant

500 : $0.99
250 : $1.03
100 : $1.06
50 : $1.1
25 : $1.13
10 : $1.17
1 : $1.2

563

AVH22MSSFEA241604

TE Connectivity

AVH22 FLT SS MT RNG R&G 24V16A Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: 1 NO & 1 NC Momentary Configuration (Pole-Throw): Single Pole - Double Throw Number of Actuators: Single Anti-Vandal Switch With 1 & 1 NC Single Pole - Double Throw | Pushbutton Switch | Part Number: AVH22MSSFEA241604 | Internal Number: 2-2364686-3 | TE Connectivity
RoHS : Compliant

50 : $49.73
25 : $52.65
10 : $55.58
1 : $58.5

AVH19LSFPA241604

TE Connectivity

AVH19 FLT SS LK PWR R&G 24V16A Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: 1 NO & 1 NC On On Configuration (Pole-Throw): Single Pole - Double Throw Number of Actuators: Single Anti-Vandal Switch With 1 & 1 NC Single Pole - Double Throw | Pushbutton Switch | Part Number: AVH19LSFPA241604 | Internal Number: 2-2364574-4 | TE Connectivity
RoHS : Compliant

50 : $48.45
25 : $51.3
10 : $54.15
1 : $57.0

AVH25MSSFEA241604

TE Connectivity

AVH25 FLT SS MT RNG R&G 24V16A Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: Momentary 1 NO & 1 NC Configuration (Pole-Throw): Single Pole - Double Throw Number of Actuators: Single Anti-Vandal Switch With Momentary Single Pole - Double Throw | Pushbutton Switch | Part Number: AVH25MSSFEA241604 | Internal Number: 2-2364700-3 | TE Connectivity
RoHS : Compliant

50 : $57.18
25 : $60.55
10 : $63.91
1 : $67.27

AVH22LSSFEA242604

TE Connectivity

AVH22 FLT SS LK RNG R&G 24V26A Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: 1 NO & 1 NC On On Configuration (Pole-Throw): Single Pole - Double Throw Number of Actuators: Single Anti-Vandal Switch With 1 & 1 NC Single Pole - Double Throw | Pushbutton Switch | Part Number: AVH22LSSFEA242604 | Internal Number: 2-2364687-4 | TE Connectivity
RoHS : Compliant

50 : $62.66
25 : $66.34
10 : $70.03
1 : $73.71

AVH19LSFE1A242604

TE Connectivity

AVH19 FLT SS LK R+P R&G 24V26A Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: On On 1 NO & 1 NC Configuration (Pole-Throw): Single Pole - Double Throw Number of Actuators: Single Anti-Vandal Switch With On On Single Pole - Double Throw | Pushbutton Switch | Part Number: AVH19LSFE1A242604 | Internal Number: 2-2364573-4 | TE Connectivity
RoHS : Compliant

50 : $59.3
25 : $62.79
10 : $66.28
1 : $69.77

AVH25MSSFE1A242604

TE Connectivity

AVH25 FLT SS MT R+P R&G 24V26A Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: 1 NO & 1 NC Momentary Configuration (Pole-Throw): Single Pole - Double Throw Number of Actuators: Single Anti-Vandal Switch With 1 & 1 NC Single Pole - Double Throw | Pushbutton Switch | Part Number: AVH25MSSFE1A242604 | Internal Number: 2-2364703-3 | TE Connectivity
RoHS : Compliant

50 : $76.99
25 : $81.52
10 : $86.05
1 : $90.58

AVH22LSSFEA241604

TE Connectivity

AVH22 FLT SS LK RNG R&G 24V16A Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: 1 NO & 1 NC On On Configuration (Pole-Throw): Single Pole - Double Throw Number of Actuators: Single Anti-Vandal Switch With 1 & 1 NC Single Pole - Double Throw | Pushbutton Switch | Part Number: AVH22LSSFEA241604 | Internal Number: 2-2364686-4 | TE Connectivity
RoHS : Compliant

50 : $49.73
25 : $52.65
10 : $55.58
1 : $58.5