985L-C1-AF5-R Price, Reseller, Stock

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMA Male to N Male Cable 6 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly SMA male to N male cable 6 inch length using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to N male cable 6 inch length using PE-SR405FLJ coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and N type cable connection on the other. Our SMA to type N cable assemblies have a male gender on end 1 and male on end 2. PE3W09855-6 can also be known as a SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3W09855-6 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohm impedance. RF specs on this 11 GHz maximum frequency SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W09855-6 can also be used in the other direction and will be N type male to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male cable 6 inch length using PE-SR405FLJ coax.

1 : $78.99
25 : $75.04
50 : $71.09
100 : $67.93

114

PE9856B/NF-20

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-90, Gain Min: 20, Beam Width, 3dB V: 16.5, Beam Width, 3dB H: 16.1, Frequency, Min: 8.2 GHz, Frequency, Max: 12.4 GHz. WR-90 Waveguide Standard Gain Horn Antenna Operating from 8.2 GHz to 12.4 GHz with a Nominal 20 dB Gain N Female Input. The PE9856B/NF-20 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-90 input and a waveguide to coaxial transition adapter. Our WR-90 waveguide antenna features a type N female connector. This single-band directional antenna comes with a UG-135/U flange. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use and microwave radio systems. Our WR-90 standard gain horn antenna with a type N female input has a minimum frequency of 8.2 GHz and a maximum frequency of 12.4 GHz. Pasternack’s PE9856B/NF-20 waveguide horn antenna has a typical gain of 20 dB. Our waveguide antenna has a typical vertical beam width of 16.5 degrees and a horizontal beam width of 16.1 degrees at 3 dB. This WR-90 waveguide horn antenna with 20 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this single-band directional antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a type N female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $2,020.0
5 : $1,939.2
10 : $1,858.4
25 : $1,777.6

PE3C9858

Pasternack Enterprises

Key Specifications. Connector 1 Series 4.3-10 Connector 1 Gender Plug Connector Angle 1 Straight Connector 1 Impedance 50 Ohm Connector 2 Series 4.3-10 Connector 2 Gender Plug Connector Angle 2 Straight Connector 2 Impedance 50 Ohm Connector 1 Body Material Brass Connector 1 Body Plating Copper-Tin-Zinc Alloy RF Cable Part Number 0.141 Formable Non-Magnetic Cable RF Cable Impedance 50 Ohm . 4.3-10 Plug to 4.3-10 Plug Non-Magnetic Cable using 0.141 Formable Coax., Pasternack's PE3C9858 4.3-10 plug to 4.3-10 plug cable using PE-141FL-NM is part of our full line of RF components available for same-day shipping. This Pasternack 4.3-10 to 4.3-10 cable assembly has a plug to plug gender configuration with 50 ohm. The PE3C9858 4.3-10 plug to 4.3-10 plug cable assembly operates to 6 GHz. Pasternack’s Non Magnetic connectors are manufactured with materials that are especially adapted to non magnetism. Our non-magnetic connectors have a higher magnetic susceptibility than existing standard connectors made of brass/nickel materials. As a result, our non-magnetic connectors are transparent to the magnetic field, which means no field distortion and a higher Signal-to-Noise Ratio (SNR). Custom versions of most RF cable assemblies can be built and shipped same day. Custom cable assembly lengths can be obtained by specifying the desired length on the web site at time of order or by contacting a sales representative. Other available RF cable assembly value added services include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly.

PE9851B-20

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-34, Frequency, Min: 22 GHz, Frequency, Max: 33 GHz. WR-34 Waveguide Standard Gain Horn Antenna Operating From 22 GHz to 33 GHz With a Nominal 20 dBi Gain With UG-1530/U Square Cover Flange. Pasternack’s PE9851B-20 WR-34 waveguide horn is also known as a waveguide horn antenna. This WR-34 standard gain horn waveguide antenna has a nominal gain of 20 dBi. Our waveguide horn can operate at frequencies ranging from 22 to 33 GHz. The standard gain horn antenna with linear polarization has a typical VSWR of 1.5:1 and is suitable for test and measurement industries. This 20 dBi waveguide horn from Pasternack has an overall length of 3.34 inches, a width of 1.97 inches, and a weight of 0.5 lbs. Our antenna comes with a UG-1530/U square cover flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-34 standard gain horn antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-34 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $1,640.0
5 : $1,574.4
10 : $1,508.8
25 : $1,443.2

PE9856B-20-CPRG

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-90, Frequency, Min: 8.2 GHz, Frequency, Max: 12.4 GHz. WR-90 Waveguide Standard Gain Horn Antenna Operating From 8.2 GHz to 12.4 GHz With a Nominal 20 dBi Gain With CPRG Flange. Pasternack’s PE9856B-20-CPRG WR-90 waveguide horn is also known as a waveguide horn antenna. This WR-90 standard gain horn waveguide antenna has a nominal gain of 20 dBi. Our waveguide horn can operate at frequencies ranging from 8.2 to 12.4 GHz. The standard gain horn antenna with linear polarization has a typical VSWR of 1.5:1 and is suitable for test and measurement industries. This 20 dBi waveguide horn from Pasternack has an overall length of 4.94 inches, a width of 3.74 inches, and a weight of 0.76 lbs. Our antenna comes with a cprg flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-90 standard gain horn antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-90 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $1,670.0
5 : $1,636.6
10 : $1,603.2
25 : $1,569.8

PE9854B-SF-30

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-62, Gain Min: 30, Beam Width, 3dB V: 5, Beam Width, 3dB H: 5, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz. WR-62 Waveguide Standard Gain Horn Antenna Operating from 12.4 GHz to 18 GHz with a Nominal 30 dB Gain SMA Female Input. The PE9854B-SF-30 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-62 input and a waveguide to coaxial transition adapter. Our WR-62 waveguide antenna features an SMA female connector. This single-band directional antenna comes with a UG-1665/U square cover flange. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use and microwave radio systems. Our WR-62 standard gain horn antenna with an SMA female input has a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. Pasternack’s PE9854B-SF-30 waveguide horn antenna has a typical gain of 30 dB. Our waveguide antenna has a typical vertical and horizontal beam width of 5 degrees at 3 dB. This antenna has a length of 25.21 inches, a width of 9.57 inches, and a weight of 0.52 lbs. This WR-62 waveguide horn antenna with 30 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this single-band directional antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $2,250.0
5 : $2,205.0
10 : $2,160.0
25 : $2,115.0

PE39855

Pasternack Enterprises

PE3W00985/HS-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMA Female Bulkhead Cable 36 Inch Length Using RG174 Coax with HeatShrink., Radio frequency assembly SMA male to SMA female bulkhead cable 36 inch length using RG174 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA female bulkhead cable 36 inch length using RG174 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a SMA bulkhead cable connection on the other. Our a SMA to a SMA cable assembly has male gender on end 1 and female on end 2. PE3W00985/HS-36 can also be known as a SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. Our PE3W00985/HS-36 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has an in-series connection. SMA plug to SMA jack cable assembly PE3W00985/HS-36 is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W00985/HS-36 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements.

1 : $89.99
25 : $85.49
50 : $80.99
100 : $77.39

PE3W00985LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMA Male to SMA Female Bulkhead Cable Using RG174 Coax, RoHS. PE3W00985LF is a SMA male to SMA female bulkhead cable using RG174 coax. This Pasternack SMA male to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00985LF SMA male to SMA female bulkhead cable assembly is constructed with RG174 coax.

PE9850/2F-15

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-28, Gain Min: 15, Beam Width, 3dB V: 32.1, Beam Width, 3dB H: 31.3, Frequency, Min: 26.5 GHz, Frequency, Max: 40 GHz. WR-28 Waveguide Standard Gain Horn Antenna Operating From 26.5 GHz to 40 GHz With a Nominal 15 dB Gain 2.92mm Female Input. The PE9850/2F-15 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-28 input and a waveguide to coaxial transition adapter. Our WR-28 waveguide antenna features a 2.92mm female connector. This single-band directional antenna comes with a flange. Our WR-28 standard gain horn antenna with a 2.92mm female input has a minimum frequency of 26.5 GHz and a maximum frequency of 40 GHz. Pasternack’s PE9850/2F-15 waveguide horn antenna has a typical gain of 15 dB. Our waveguide antenna has a typical vertical beam width of 32.1 degrees and a horizontal beam width of 31.3 degrees at 3 dB. This WR-28 waveguide horn antenna with 15 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this single-band directional antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a 2.92mm female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $2,000.0
5 : $1,920.0
10 : $1,840.0

PE9850B-30

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-28, Frequency, Min: 26.5 GHz, Frequency, Max: 40 GHz, Beam Width V: 5, Beam Width H: 5. WR-28 Waveguide Standard Gain Horn Antenna Operating From 26.5 GHz to 40 GHz With a Nominal 30 dBi Gain With UG-599/U Square Cover Flange. Pasternack’s PE9850B-30 WR-28 waveguide horn is also known as a waveguide horn antenna. This WR-28 standard gain horn waveguide antenna has a nominal gain of 30 dBi. Our waveguide horn can operate at frequencies ranging from 26.5 to 40 GHz. The standard gain horn antenna has a typical VSWR of 1.5:1 and is suitable for test and measurement industries. This 30 dBi waveguide horn from Pasternack has an overall length of 11.61 inches, a width of 5.09 inches, and a weight of 0.35 lbs. Our WR-28 waveguide horn antenna has a typical vertical beam width of 5 degrees and a horizontal beam width of 5 degrees at 3 dB. Our antenna comes with a UG-599/U square cover flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-28 standard gain horn antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-28 waveguide horn antenna with 30 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $1,850.0
5 : $1,776.0
10 : $1,702.0
25 : $1,628.0

PE9856B-25

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-90, Frequency, Min: 8.2 GHz, Frequency, Max: 12.4 GHz, Beam Width V: 8, Beam Width H: 8. WR-90 Waveguide Standard Gain Horn Antenna Operating from 8.2 GHz to 12.4 GHz with a Nominal 25 dBi Gain with UG-135/U Square Cover Flange. Pasternack’s PE9856B-25 WR-90 waveguide horn is also known as a waveguide horn antenna. This WR-90 standard gain horn waveguide antenna has a nominal gain of 25 dBi. Our waveguide horn can operate at frequencies ranging from 8.2 to 12.4 GHz. The standard gain horn antenna has a typical VSWR of 1.5:1 and is suitable for test and measurement industries. This 25 dBi waveguide horn from Pasternack has an overall length of 22.5 inches, a width of 9.83 inches, and a weight of 0.35 lbs. Our WR-90 waveguide horn antenna has a typical vertical beam width of 8 degrees and a horizontal beam width of 8 degrees at 3 dB. Our antenna comes with a UG-135/U square cover flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-90 standard gain horn antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-90 waveguide horn antenna with 25 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $2,050.0
5 : $1,968.0
10 : $1,886.0
25 : $1,804.0

PE3W11985

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. N Male Right Angle to 3.5mm Male Cable Using PE-SR405FLJ Coax. PE3W11985 is a N male right angle to 3.5mm male cable using PE-SR405FLJ coax. This Pasternack N male right angle to 3.5mm male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm 3.5mm for connector 2. N right angle to 3.5mm coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male 3.5mm cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W11985 N male right angle to 3.5mm male cable assembly is constructed with PE-SR405FLJ coax.

PE9854B/NF-15

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-62, Gain Min: 15, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz. WR-62 Waveguide Standard Gain Horn Antenna Operating from 12.4 GHz to 18 GHz with a Nominal 15 dB Gain N Female Input. The PE9854B/NF-15 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-62 input and a waveguide to coaxial transition adapter. Our WR-62 waveguide antenna features a type N female connector. This single-band directional antenna comes with a flange. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use and microwave radio systems. Our WR-62 standard gain horn antenna with a type N female input has a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. Pasternack’s PE9854B/NF-15 waveguide horn antenna has a typical gain of 15 dB. This WR-62 waveguide horn antenna with 15 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this single-band directional antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a type N female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $2,240.0
5 : $2,150.4
10 : $2,060.8
25 : $1,971.2

PE9854B/SF-10

Pasternack Enterprises

Key Specifications, Gain Min: 10, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz. WR-62 Standard Gain Horn Antenna Operating From 12.4 GHz to 18 GHz, 10 dBi Nominal Gain, SMA Female Input Connector, ProLine. The PE9854B/SF-10 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Our waveguide antenna features an SMA female connector. This single-band directional antenna comes with a flange. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use and microwave radio systems. Our standard gain horn antenna with an SMA female input has a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. Pasternack’s PE9854B/SF-10 waveguide horn antenna has a typical gain of 10 dB. This antenna has a length of 2.61 inches, a width of 0.93 inches, and a weight of 0.5 lbs. This waveguide horn antenna with 10 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this single-band directional antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $2,060.0
5 : $1,977.6
10 : $1,895.2
25 : $1,812.8

TE Connectivity

322985

TE Connectivity

TERMINAL,PIDG SPD 12-10 6 Spade Terminal Type: Spade Tongue Terminal Wire Size: 12 – 10 AWG Wire Size: 2.62 – 6.64 mm² Wire Size: 5180 – 13100 CMA Stud Size: #6 M3.5 Spade Tongue Terminal 12 – 10 AWG 2.62 – 6.64 mm² 5180 – 13100 CMA | Pidg Spade Tongue Terminal | Part Number: 322985 | Internal Number: 322985 | Alias Number: AMPS-0-0322985-0 | TE Connectivity
RoHS : Compliant

2,500 : $1.68
1,000 : $1.73
500 : $1.77
250 : $1.82
100 : $1.86
50 : $1.91
25 : $1.95
10 : $2.0
1 : $2.04

28,003

2298508-1

TE Connectivity

MATE-AX, Pin center contact, RG 174 Terminal Type: Pin Wire Size: 26 AWG Wire Size: .14 mm² Interface Plating: Silver (Ag) Primary Locking Feature: On the Terminal Pin 26 AWG .14 mm² Silver (Ag) | Automotive Terminal | Part Number: 2298508-1 | Internal Number: 2298508-1 | TE Connectivity
RoHS : Compliant

20,000 : $0.14
10,000 : $0.17
5,000 : $0.23
2,000 : $0.3
1,000 : $0.46
100 : $0.55

19,310

1-322985-0

TE Connectivity

TERMINAL,PIDG SPD 12-10 6 Spade Terminal Type: Spade Tongue Terminal Wire Size: 12 – 10 AWG Wire Size: 2.62 – 6.64 mm² Wire Size: 5180 – 13100 CMA Stud Size: M3.5 #6 Spade Tongue Terminal 12 – 10 AWG 2.62 – 6.64 mm² 5180 – 13100 CMA | Pidg Spade Tongue Terminal | Part Number: 1-322985-0 | Internal Number: 1-322985-0 | TE Connectivity
RoHS : Compliant

1,000 : $4.3
500 : $4.43
250 : $4.56
100 : $4.69
50 : $4.82
25 : $4.95
10 : $5.08
1 : $5.21

8,113

5223985-1

TE Connectivity

UPM KEYED GUIDE PIN Connector Hardware Accessory Type: Guide Pin Primary Product Material: Zinc Alloy Die Casting Hardware Accessory Function: Guide Hardware Guide Pin Zinc Alloy Die Casting Guide Hardware | Connector Hardware | Part Number: 5223985-1 | Internal Number: 5223985-1 | TE Connectivity
RoHS : Compliant

1,000 : $1.75
500 : $1.8
250 : $1.86
100 : $1.92
50 : $1.98
1 : $2.17

4,727

5177985-4

TE Connectivity

0.8FH,R05H.5,100,08/Sn,TR,SC PCB Connector Type: PCB Mount Receptacle PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 100 PCB Mount Receptacle Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 5177985-4 | Internal Number: 5177985-4 | TE Connectivity
RoHS : Compliant

1,000 : $3.42
500 : $3.53
250 : $3.87
100 : $4.19
50 : $4.47
25 : $4.53
10 : $5.01
1 : $5.8

2,534

5-102398-5

TE Connectivity

14 AMPMODU MT ASSY DR.100CL SN Number of Positions: 14 Connector & Housing Type: Receptacle Connector Product Type: Connector Assembly Mating Retention: Without Termination Method to Wire & Cable: Insulation Displacement (IDC) Standard Rectangular Connector | 14 Receptacle Connector Assembly Without | Part Number: 5-102398-5 | Internal Number: 5-102398-5 | TE Connectivity
RoHS : Compliant

1,000 : $11.04
500 : $11.37
250 : $11.71
100 : $12.04
50 : $12.38
25 : $12.71
10 : $13.05
1 : $13.38

2,023

2169851-1

TE Connectivity

Heat Sink Clip, Ganged SFP+ Device Type: SFP+ SFP+ | Heat Sink | Part Number: 2169851-1 | Internal Number: 2169851-1 | TE Connectivity
RoHS : Compliant

1,000 : $0.74
500 : $0.76
250 : $0.78
100 : $0.81
50 : $0.83
1 : $0.91

1,865

4-2098541-1

TE Connectivity

3POS, MCON 1.2 CB REC 2p TL SEALED Nominal Voltage Architecture: 12 V Number of Positions: 3 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Board Wire-to-Wire Mating Tab Width: 1.2 mm 48V Ready 1.2Mm Sealed Connector | 12 V 3 Housing for Female Terminals Wire-to-Board | Part Number: 4-2098541-1 | Internal Number: 4-2098541-1 | 1.2 mm | TE Connectivity
RoHS : Compliant

1,000 : $0.78
500 : $0.98
250 : $1.49
100 : $1.96
50 : $2.35

1,540

2098557-1

TE Connectivity

2POS, MCON 1.2 CB REC 2p TL SEALED Nominal Voltage Architecture: 12 V Number of Positions: 2 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Board Wire-to-Wire Mating Tab Width: 1.2 mm 48V Ready 1.2Mm Sealed Connector | 12 V Housing for Female Terminals Wire-to-Board | Part Number: 2098557-1 | Internal Number: 2098557-1 | 1.2 mm | TE Connectivity
RoHS : Compliant

2,500 : $0.68
1,000 : $0.85
500 : $1.02
250 : $1.29
100 : $1.7
50 : $2.04

1,460

1-480698-5

TE Connectivity

02P UMNL PLUG HSG GRN Number of Positions: 2 Connector & Housing Type: Plug Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Wire Wire-to-Board Standard Rectangular Connector | 2 Plug Housing Crimp | Part Number: 1-480698-5 | Internal Number: 1-480698-5 | TE Connectivity
RoHS : Compliant

1,000 : $0.26
100 : $0.36
10 : $0.43
1 : $0.57

1,115

536098-5

TE Connectivity

064 EURO TYP R PIN AP MFBL ASY Eurocard Connector | Part Number: 536098-5 | Internal Number: 536098-5 | TE Connectivity
RoHS : Compliant

1,000 : $6.42
500 : $6.6
250 : $6.81
100 : $7.03
50 : $7.24
1 : $7.94

907

6-102398-5

TE Connectivity

34 AMPMODU MT ASSY DR .100CL Number of Positions: 34 Connector & Housing Type: Receptacle Connector Product Type: Connector Assembly Mating Retention: Without Termination Method to Wire & Cable: Insulation Displacement (IDC) Standard Rectangular Connector | 34 Receptacle Connector Assembly Without | Part Number: 6-102398-5 | Internal Number: 6-102398-5 | TE Connectivity
RoHS : Compliant

1,000 : $26.33
500 : $27.13
250 : $27.93
100 : $28.73
50 : $29.53
25 : $30.33
10 : $31.12
1 : $31.92

724

535098-5

TE Connectivity

120 EURO TYPE C RECEPT ST ASSY Connector & Housing Type: Receptacle Connector System: Board-to-Board Termination Post & Tail Length: .13 in Termination Post & Tail Length: 3.3 mm Number of Positions: 120 Receptacle Board-to-Board .13" 3.3 mm | Eurocard Connector | Part Number: 535098-5 | Internal Number: 535098-5 | TE Connectivity
RoHS : Compliant

1,000 : $6.83
500 : $7.02
250 : $7.24
100 : $7.48
50 : $7.7
1 : $8.45

580

2334985-2

TE Connectivity

SFP28 DIRECT ATTACH CA, 1M, 32AWG Cable Assembly Type: SFP+ to SFP+ Number of Positions: 4 Cable Assembly Length: 1 m Cable Assembly Length: 3.28 ft Data Rate: 25 Gb/s SFP+ to SFP+ 4 1 m 3.28 ft | High Speed I/o Cable Assembly | Part Number: 2334985-2 | Internal Number: 2334985-2 | TE Connectivity
RoHS : Compliant

1,000 : $38.09
500 : $39.17
250 : $40.38
100 : $41.73
50 : $42.95
1 : $47.14

5535098-5

TE Connectivity

ASSEMBLY,RECEPTACLE,EUROCARD,T Connector & Housing Type: Receptacle Connector System: Board-to-Board Termination Post & Tail Length: .13 in Termination Post & Tail Length: 3.3 mm Number of Positions: 120 Receptacle Board-to-Board .13" 3.3 mm | Eurocard Connector | Part Number: 5535098-5 | Internal Number: 5535098-5 | TE Connectivity
RoHS : Compliant

1,000 : $7.28
500 : $7.48
250 : $7.72
100 : $7.97
50 : $8.21
1 : $9.01

Teledyne HiRel

5962-9098501BRA