| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
9210-NET Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
![]() Avnet Americas | 02-09-2101 | Molex | - Tape and Reel (Alt: 0002092101) RoHS : Compliant |
| 644,000 | |
| 02-09-2103 | Molex | Terminal, Pin, Wire to Wire Connector, Tin, Brass, Cable Mount, Straight, 1190 Series, Crimp - Bulk (Alt: 0002092103) RoHS : Compliant |
| 76,000 | ||
| PE-92100NL | Pulse Electronics Corporation | Toroidal Inductor, 25 uH, 25 A, 43 Milliohm, ? 20% - Trays (Alt: PE-92100NL) RoHS : Compliant |
| 8,350 | ||
| 105429-2108 | Molex | - Tape and Reel (Alt: 1054292108) RoHS : Compliant |
| 5,400 | ||
| TLE92102QVWXUMA1 | Infineon Technologies AG | Motor Driver/Controller, Brushed DC, 8 V to 29 V, 4 Outputs, 150 mA, 32 Pins, VQFN-EP - Tape and Reel (Alt: TLE92102QVWXUMA1) RoHS : Compliant |
| 5,000 | ||
| 105429-2106 | Molex | - Tape and Reel (Alt: 1054292106) RoHS : Compliant |
| 1,200 | ||
| PE-92102KNL | Pulse Electronics Corporation | Toroidal Inductor, Vertical, KlipMount PE-921 Series, 100 ?H, 2.6 A, 0.1 ohm, ? 20% - Trays (Alt: PE-92102KNL) RoHS : Compliant |
| 636 | ||
| M85049/49-2-10A | Glenair Inc | - Bulk (Alt: M85049/49-2-10A) RoHS : Not Compliant |
| 12 | ||
| EVALKITTLE92102QVWTOBO1 | Infineon Technologies AG | EVALKITTLE92102QVWTOBO1 - Boxed Product (Development Kits) (Alt: EVALKITTLE92102QVWTOBO1) RoHS : Not Compliant | 2 | |||
| RAA489210AGNP#AA5 | Renesas Electronics Corporation | RAA489210 10 MCU & BATTERY FRONT END, STANDALONE, GENERAL PU - Trays (Alt: RAA489210AGNP#AA5) RoHS : Compliant | 0 | |||
| 801-007-26NF9-210PA | Glenair Inc | Circular Connector Plug 10 Position PIN Contact Crimp Straight Cable Mount - Bulk (Alt: 801-007-26NF9-210PA) RoHS : Not Compliant |
| 0 | ||
AX7PBF1-921.0000T![]() | Abracon Corporation | - Tape and Reel (Alt: AX7PBF1-921.0000T) RoHS : Compliant | 0 | |||
| 801-007-16M9-210BA | Glenair Inc | CIRC MGHTY MSE (80/60) - CIRCULAR MIGHTY MOUSE - Bulk (Alt: 801-007-16M9-210BA) RoHS : Not Compliant |
| 0 | ||
| 801-007-16ZNU9-210SD | Glenair Inc | CIRC MGHTY MSE (80/60) - CIRCULAR MIGHTY MOUSE - Bulk (Alt: 801-007-16ZNU9-210SD) RoHS : Not Compliant |
| 0 | ||
| 801-008-16NF9-210SD | Glenair Inc | CIRC MGHTY MSE (80/60) - CIRCULAR MIGHTY MOUSE - Bulk (Alt: 801-008-16NF9-210SD) RoHS : Not Compliant |
| 0 | ||
![]() Newark | 10145492-10LF | Amphenol Communications Solutions | Conn Housing, 0.8Mm, Rcpt, 10Positions; |Amphenol Communications Solutions 10145492-10LF RoHS : Compliant |
| 23,701 | |
| 2263921023 | Molex | Cbl Assy, 2P, Rcpt-Free End, 300Mm, Blk; |Molex 2263921023 RoHS : Compliant |
| 2,550 | ||
| 46992-1020 | Molex | Conn Housing, Rcpt, 10Pos, 4.2Mm, Red; Product Range:Mini-Fit Versa Color 46992 Series; Gender:Receptacle; No. Of Positions:10Positions; Pitch Spacing:4.2Mm; For Use With:Molex Mini-Fit 5556 Series Female Crimp Terminals Rohs Compliant: Yes RoHS : Compliant |
| 2,477 | ||
| 9921 003100 | Belden Inc | Wire, Hook Up, Pvc, Orange, 22Awg; |Belden 9921 003100 RoHS : Compliant |
| 500 | ||
| 702921000 | Wurth Elektronik | Pcb Spacer/Support, 2.5Mm, Nylon 6.6; |Würth Elektronik 702921000 RoHS : Compliant |
| 286 | ||
| 19210003 | CML Innovative Technologies | Led Indicator, 10Mm, He-Red; |Cml Innovative Technologies 19210003 RoHS : Compliant |
| 200 | ||
| 224092-1063 | Molex | Cable Assy, 6Pos, Plug-Free End, 300Mm; |Molex 224092-1063 RoHS : Compliant |
| 190 | ||
| 224092-1022 | Molex | Cable Assy, 2Pos, Plug-Free End, 150Mm; |Molex 224092-1022 RoHS : Compliant |
| 89 | ||
| 7499210123A | Wurth Elektronik | Rj45 Lan Transformer, 8P8C, Th; |Würth Elektronik 7499210123A RoHS : Compliant |
| 84 | ||
| 2263921064 | Molex | Cbl Assy, 6P, Rcpt-Free End, 600Mm, Blk; |Molex 2263921064 RoHS : Compliant |
| 50 | ||
| PX0921/05/P | Bulgin | Plug, In-Line, 5Way; |Bulgin Limited PX0921/05/P RoHS : Compliant |
| 40 | ||
| 216292-1023 | Molex | Cable Assy, 2P Wtb Plug-Plug, 23.6"; Connector To Connector:Wire To Board Plug To Wire To Board Plug; No. Of Positions:2Positions; Connector Pitch:6.7Mm; No. Of Rows:1 Row; Cable Length - Metric:600Mm; Cable Length - Imperial:23.6" Rohs Compliant: Yes RoHS : Compliant |
| 25 | ||
| 2792109 | Phoenix Contact | Pcb, P1-Uegm; |Phoenix Contact 2792109 (Alternate Part Number: 4017918072575 RoHS : Compliant |
| 5 | ||
| FMC1921085-24 | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 24", 610Mm, Fm-F086; |Fairview Microwave FMC1921085-24 RoHS : Not Compliant |
| 5 | ||
| 9210 | Abbatron | Spacer, Round, Alu, 0.15" Id, 0.25" Od; |Abbatron Hh Smith 9210 RoHS : Compliant |
| 0 | ||
![]() Analog Devices Inc | LTC1992-10IMS8#TRPBF | Analog Devices Inc | L Pwr, Fully Diff In/Out Amp/D RoHS : Compliant |
| 5,000 | |
| LTC1992-10CMS8#PBF | Analog Devices Inc | L Pwr, Fully Diff In/Out Amp/D RoHS : Compliant |
| 2,160 | ||
| LTC1992-10IMS8#PBF | Analog Devices Inc | L Pwr, Fully Diff In/Out Amp/D RoHS : Compliant |
| 1,200 | ||
| LTC1992-10HMS8#PBF | Analog Devices Inc | L Pwr, Fully Diff In/Out Amp/D RoHS : Compliant |
| 700 | ||
| LTC1992-10HMS8#TRPBF | Analog Devices Inc | L Pwr, Fully Diff In/Out Amp/D RoHS : Compliant |
| 0 | ||
| LTC1992-10CMS8#TRPBF | Analog Devices Inc | L Pwr, Fully Diff In/Out Amp/D RoHS : Compliant |
| 0 | ||
![]() RS | 02-09-2103 (02-09-2103-C) | Molex | CRIMP TERMINAL, MALE, 0.093" DIAMETER, TIN-PLATED BRASS, 14-20 AWG, 1190 SERIES |
| 66,720 | |
| PX0921/07/S | Bulgin | CABLE CONNECTOR IN-LINE 7 SOCKET IN-LINE FLEX SCREW, PX0921 SERIES RoHS : Compliant |
| 141 | ||
| 7589210 | RS Pro | SLOTTED CONTROL PANEL DUCT PVC 6FT X 1IN X 3IN SELF EXTINGUISHING UL, CSA |
| 96 | ||
| 934092102 | Altech Corporation | TEST LEAD MLN SIL 100/1 BLUE, BANANA PLUG, 4MM, 40" LENGTH, 18AWG |
| 47 | ||
| 9692105 | WIKA Instrument LP | PRESSURE GAUGE, 0/3000 PSI SCALE ON 2.5" DIAL, 1/4" NPT, SERIES 213.53 |
| 10 | ||
| 05134921001 (134921) | Wera Werk Hermann Werner GmbH & Co. KG | 851/1 PROFILED VERSION,3 X 25MM BITS FOR PHILLIPS SCREWS |
| 10 | ||
| 9210212 | RS Pro | STRAIGHT FLANGE MOUNT SMA CONNECTOR 50 OHM SOLDER TERM. COAXIAL |
| 6 | ||
| 49-56-9210 | Milwaukee Electric Tool Corporation | BIG HAWG WITH CARBIDE TEETH 2-1/8-INCH |
| 6 | ||
| 9210005 | Metal Work Pneumatic USA Inc | SY2 1/4" ADAPTER FOR 1/8" NPT GAUGE, SYNTESI SERIES |
| 5 | ||
| F92-1021 | White-Rodgers | NATURAL TO LP GAS CONVERSION KIT |
| 5 | ||
| 9210011 | Metal Work Pneumatic USA Inc | SY2 THREADED PORT KIT, 3/8"B SP, SYNTESI SERIES |
| 3 | ||
| 7000-74121-7921000 | Murrelektronik GmbH | CORDSET, RJ45 MALE 45 DEG. UP, ETHERNET, PUR 2X2XAWG22 SHIELDED RED, 10M RoHS : Compliant |
| 3 | ||
| 9210012X | Metal Work Pneumatic USA Inc | SY2 THREADED PORT KIT, 1/2"B SP, ANTI-CORROSION, SYNTESI SERIES |
| 2 | ||
| 9210 | 80/20 Inc | END CAP - BLACK |
| 0 | ||
| 9210 | HH Smith | SPACER; ROUND; ALUMINUM; #6 ID; 1/4" OD; 9/16" LENGTH |
| 0 | ||
![]() Microchip Technology Inc | PD69210R-022320 | Microchip Technology Inc | MCU for PD692xx family, based PD69210, FW Ver 2.23.20, VQFN, Projected EOL: 2046-06-03 RoHS : Compliant |
| 17,223 | |
| PD69210R-034400 | Microchip Technology Inc | MCU for PD692xx family, based PD69210, FW Ver 3.44, VQFN, Projected EOL: 2046-05-20 RoHS : Compliant |
| 7,129 | ||
| PD69210R-035200 | Microchip Technology Inc | MCU for PD692xx family, based PD69210, FW Ver 3.52, VQFN, Projected EOL: 2046-06-04 RoHS : Compliant |
| 5,270 | ||
| PD69210C-022719 | Microchip Technology Inc | MCU for PD692xx family , based PD69210, FW Ver 2.27.19, VQFN, Projected EOL: 2051-05-27 RoHS : Compliant |
| 2,450 | ||
| PD69210R-022720 | Microchip Technology Inc | MCU for PD692xx family, based PD69210, FW Ver 2.27.20, VQFN, Projected EOL: 2051-05-27 RoHS : Compliant |
| 1,960 | ||
| PD69210R-022620 | Microchip Technology Inc | MCU for PD692xx family, based PD69210, FW Ver 2.26.20, VQFN, Projected EOL: 2050-11-29 RoHS : Compliant |
| 1,470 | ||
| PD69210R-035500-TR | Microchip Technology Inc | MCU for PD692xx family, based PD69210, FW Ver 3.55 T&R, VQFN, Projected EOL: 2051-07-13 RoHS : Compliant |
| 980 | ||
| PD69210R-035200-TR | Microchip Technology Inc | MCU for PD692xx family, based PD69210, FW Ver 3.52 T&R, VQFN, Projected EOL: 2046-06-04 RoHS : Compliant |
| 700 | ||
| PD69210C-022419 | Microchip Technology Inc | MCU for PD692xx family, based PD69210, FW Ver 2.24.19, VQFN, Projected EOL: 2051-03-18 RoHS : Compliant |
| 670 | ||
| PD39210R-011020 | Microchip Technology Inc | MCU for PD392xx family, based PD39210, FW Ver 1.10.20, VQFN, Projected EOL: 2051-01-05 RoHS : Compliant |
| 490 | ||
| PD69210R-022420 | Microchip Technology Inc | MCU for PD692xx family, based PD69210, FW Ver 2.24.20, VQFN, Projected EOL: 2051-03-18 RoHS : Compliant |
| 490 | ||
| PD69210C-022319 | Microchip Technology Inc | MCU for PD692xx family , based PD69210, FW Ver 2.23.19, VQFN, Projected EOL: 2046-06-03 RoHS : Compliant |
| 204 | ||
| PD69210C-022619 | Microchip Technology Inc | MCU for PD692xx family, based PD69210, FW Ver 2.26.19, VQFN, Projected EOL: 2050-11-29 RoHS : Compliant |
| 190 | ||
| PD69210R-035500 | Microchip Technology Inc | MCU for PD692xx family, based PD69210, FW Ver 3.55, VQFN, Projected EOL: 2051-07-13 RoHS : Compliant |
| 85 | ||
| 16192-104 | Microchip Technology Inc | RB, XPRO, 10 MHZ, 5E-11/MONTH AGING, AT ENABLED REFRESH ROHS, Projected EOL: 2051-01-13 RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | MRF8P9210NR3 | NXP Semiconductors | MRF8P9210 - Single W-CDMA RF Power LDMOS Transistor, 920-960 MHz, 63 W Avg., 28 V RoHS : Compliant |
| 100 | |
| NCID9210R2 | onsemi | Digital Isolators I²C, SPI 100kV/µs 16-SOIC T/R RoHS : Not Compliant |
| 657 | ||
| TLE92108232QXXUMA1 | Infineon Technologies AG | TLE92108-232QX - MOTIX Multi MOSFET Driver IC RoHS : Compliant |
| 805 | ||
| DIX9210PTR | Texas Instruments | 192kHz DIX, v |
| 62,000 | ||
| PCM9210PTR | Texas Instruments | 192kHz DIX with ADC and Routing RoHS : Compliant |
| 13,130 | ||
SCAN921023SLC/NOPB![]() | Texas Instruments | Interface Circuit, CMOS, PBGA49 RoHS : Compliant |
| 2,293 | ||
SCAN921025HSM/NOPB![]() | Texas Instruments | IC Serializer LVCMOS, LVTTL LVDS 800Mbps 3V - 3.6V 49-BGA Tray RoHS : Compliant |
| 93 | ||
SCAN921023SLC![]() | Texas Instruments | IC Serializer LVCMOS, LVTTL LVDS 660Mbps 3V - 3.6V 49-BGA Tray RoHS : Not Compliant |
| 2,912 | ||
TLC59210IN![]() | Texas Instruments | LED Driver ICs Linear 200mA 20-DIP Tube RoHS : Compliant |
| 135 | ||
SCAN921025HSM![]() | Texas Instruments | Line Driver, 1 Func, 1 Driver, CMOS, PBGA49 RoHS : Not Compliant |
| 6,160 | ||
| ISPLSI-3192-100LQ | Lattice Semiconductor Corporation | ispLSI3192 - In-System Programmable High Density PLD |
| 22 | ||
| SCAN921023SLC/NOPB | National Semiconductor Corporation | Interface Circuit, CMOS, PBGA49 RoHS : Compliant |
| 2,829 | ||
| SCAN921025HSM | National Semiconductor Corporation | Line Driver, 1 Func, 1 Driver, CMOS, PBGA49 RoHS : Not Compliant |
| 3,013 | ||
| SCAN921025HSM/NOPB | National Semiconductor Corporation | IC Serializer LVCMOS, LVTTL LVDS 800Mbps 3V - 3.6V 49-BGA Tray RoHS : Compliant |
| 22,843 | ||
| SCAN921025SLC | National Semiconductor Corporation | Line Driver, 1 Func, 1 Driver, CMOS, PBGA49 RoHS : Not Compliant |
| 470 | ||
![]() Sager | 9792109210 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | ||
| 9713921066 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9755921011 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9755921048 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9757921071 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9761921076 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9792103199 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9792105188 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9792106204 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9792107221 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9792108031 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9792108112 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9792109003 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9813921007 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9813921052 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
![]() TME | 105429-2106 | Molex | Connector: wire-board; data; Inom: 4A; PIN: 6; 2.5mm; Imax: 7A; tinned |
| 24,900 | |
| 52892-1096 | Molex | Connector: FFC/FPC; data; gold-plated; SMT; 500mA; 50V; PIN: 10; ZIF RoHS : Compliant |
| 10,636 | ||
| 36921-0303 | Molex | Connector: wire-board; socket; male; data; Inom: 13A; 600V; PIN: 3 |
| 1,450 | ||
| 36921-0510 | Molex | Connector: wire-board; socket; data; Inom: 13A; PIN: 5; unshielded |
| 750 | ||
| 226392-1064 | Molex | 226392-1064 |
| 450 | ||
| 216292-1032 | Molex | PIN: 3; black; tinned; 6.7mm; 14AWG |
| 180 | ||
| 1.209.2101.14 | HUMMEL AG | Cable gland; PG21; IP54; polyamide; black; UL94V-0; HSK-K |
| 115 | ||
| 0092101000100 | ALPS MAYKESTAG GmbH | Drill bit; for metal; Ø: 10mm; L: 89mm; Working part len: 43mm |
| 2 | ||
| 0092100600100 | ALPS MAYKESTAG GmbH | Drill bit; for metal; Ø: 6mm; L: 66mm; Working part len: 28mm |
| 1 | ||
| 01049210 | GSR | Tap: metric; M8; right hand thread; 1.25; L: 90mm; 6.2mm |
| 0 | ||
09210009971![]() | HARTING Technology Group | Marker; Han D-AV MK Coding Bar 88pcs.5x10mm RoHS : Compliant |
| 0 | ||
| 09210404602 | HARTING Technology Group | Connector: HDC; contact insert; male; 10A; 250V; Han D® AV; PIN: 40 RoHS : Compliant |
| 0 | ||
| 1792100 | Phoenix Contact | Connector: pluggable terminal block; plug; COMBICON M; 12A; 630V RoHS : Compliant |
| 0 | ||
| 192-10020 | HellermannTyton | Fixing clamp; Øbundle : 9.3÷10.5mm; W: 5.9mm; polyamide; black |
| 0 | ||
| 7000-44711-7921000 | Murrelektronik GmbH | Cable: for sensors; PIN: 4; M12 male straight,RJ45 plug; 10m; 1.5A |
| 0 | ||
![]() Ameya Holding Limited | TPS629210QDRLRQ1 | Texas Instruments | RoHS : Compliant | 30,000 | ||
| 199210-1 | Microchip Technology Inc | 103 | ||||
![]() ComSIT USA | 7499210123A | WURTH ELEKTRONIK (WURTH ELECTRONICS) | AVAILABLE EU | 122 | ||
| 218192100A | TESLA MOTORS | AVAILABLE EU | 90 | |||
| ASY0379210 | FOXCONN CM-NANNING CHINA | AVAILABLE EU | 9 | |||
| 218192100D | Taitech | AVAILABLE EU | 71 | |||
| 218192100F | Taitech | AVAILABLE EU | 98 | |||
![]() ComSIT USA | K89309210 | Chemi-Con | 2.0 mm pitch wire-to-wire connector, 3 A, 50 V, used for interconnects in compact electronic assemblies. RoHS : Compliant | 15,287 | ||
| K89409210 | Chemi-Con | Wire-to-wire connector housing, 4-position, 2.0 mm pitch, rated 3A 50V, used for compact power and signal connections in electronic equipment RoHS : Compliant | 14,554 | |||
| 21092102 | TE Connectivity | RECT CONN HSNG PLUG Female Socket Free Hanging (In-Line) 1 RoHS : Compliant | 6,265 | |||
| UPD78F9210GRTJJGA | NEC Electronics Group | Microcontroller, 8-Bit, FLASH, UPD78K0 CPU, 10MHz, CMOS, PDSO16 RoHS : Compliant | 2,662 | |||
IRFU9210PBF![]() | International Rectifier | HEXFET POWER MOSFET Power Field-Effect Transistor, 1.9A I(D), 200V, 3ohm, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET, TO-251AA RoHS : Compliant | 2,625 | |||
| 34921030010PPTR | W+P Products GmbH | SMT FEMALE HEADERS, 2.54MM PITCH Board Connector, 10 Contact(s), 2 Row(s), Female, Right Angle, 0.1 inch Pitch, Surface Mount Terminal, Locking RoHS : Compliant | 2,100 | |||
IRFR9210PBF![]() | Vishay Siliconix | POWER MOSFET Power Field-Effect Transistor, 1.9A I(D), 200V, 3ohm, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET, TO-252AA RoHS : Compliant | 1,200 | |||
IRFD9210![]() | Vishay Siliconix | HEXFET POWER MOSFET Small Signal Field-Effect Transistor, 0.4A I(D), 200V, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Not Compliant | 1,100 | |||
| MSM9210GS2KF17 | OKI Electric Industry Co Ltd | 32-BIT DUPLEX/TRIPLEX (1/2 DUTY / 1/3 DUTY) VF CONTROLLER/DRIVER WITH DIGITAL DIMMING Vacuum Fluorescent Driver, 32-Segment, CMOS, PQFP56 RoHS : Not Compliant | 750 | |||
| 7499210124A | Adolf Wuerth Gmbh & Co Kg | WE-RJ45LAN 10/100BASET POE LAN-TRANSFORMER Telecom and Datacom Connector RoHS : Compliant | 745 | |||
| IRFD9210PBT | Vishay Siliconix | HEXFET POWER MOSFET Small Signal Field-Effect Transistor, 0.4A I(D), 200V, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Not Compliant | 700 | |||
IRFR9210![]() | Vishay Siliconix | POWER MOSFET Power Field-Effect Transistor, 1.9A I(D), 200V, 3ohm, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET, TO-252 RoHS : Not Compliant | 80 | |||
| M4A338419210SAI | Lattice Semiconductor Corporation | ISPMACH 4A CPLD HIGH PERFORMANCE EECMOS IN-SYSTEM PROGRAMMABLE LOGIC EE PLD, 10ns, 384-Cell, CMOS, PBGA256 RoHS : Not Compliant | 41 | |||
![]() GLYN GmbH & Co. KG | NL192108AC18-01D | Tianma Micro-electronics Co | TFT 15.60", 1920x1080, IPS, 400cd, eDP | 1 | ||
![]() Interstate Connecting Components | BM0921-000 | TE Connectivity | BAH-038081524 | 0 | ||
| 943-99692-10008 | Amphenol Fiber Optic Products | JUMPER MPO(F), 12F 3MM OM4 W/P ERROR:#REF! | 0 | |||
| 801-007-16M9-210BA | Glenair Inc | RoHS : Compliant | 0 | |||
| 801-007-16ZNU9-210SD | Glenair Inc | RoHS : Not Compliant | 0 | |||
| 801-008-16NF9-210SD | Glenair Inc | RoHS : Not Compliant | 0 | |||
| 801-008-26M9-210PC | Glenair Inc | RoHS : Compliant | 0 | |||
| 801-009-01C9-210BA | Glenair Inc | 0 | ||||
| 801-009-01M9-210PA | Glenair Inc | RoHS : Compliant | 0 | |||
| 801-009-01NF9-210BB | Glenair Inc | RoHS : Compliant | 0 | |||
| 801-009-07M9-210AD | Glenair Inc | RoHS : Compliant | 0 | |||
| 801-009-12C9-210AB | Glenair Inc | 0 | ||||
| 801-009-22NF9-210SB | Glenair Inc | RoHS : Not Compliant | 0 | |||
| 801-009-22ZNU9-210AA | Glenair Inc | RoHS : Compliant | 0 | |||
| 801-010-01C9-210SD | Glenair Inc | 0 | ||||
| 801-010-02ZN9-210BA | Glenair Inc | 0 | ||||
![]() PEI Genesis | M83723/59-210WC | Amphenol PCD |
| 23 | ||
| M83723/59-210AR | Amphenol PCD |
| 1 | |||
| 192105 | Amphenol RF |
| 0 | |||
| M85049/49-2-10A | Amphenol PCD |
| 0 | |||
| M85049/49-2-10A | SOURIAU-SUNBANK |
| 0 | |||
| 29-2106236-00 | Amphenol PCD |
| 0 | |||
| 192100 | Amphenol RF |
| 0 | |||
| S4599-2-10 | SOURIAU-SUNBANK |
| 0 | |||
| S992-108-1-12 | SOURIAU-SUNBANK |
| 0 | |||
| 21-033921-075 | Amphenol Corporation |
| 0 | |||
| 192108 | Amphenol RF |
| 0 | |||
| M38999/2-10BD | SOURIAU-SUNBANK |
| 0 | |||
| 29-2105237-01 | Amphenol PCD |
| 0 | |||
| 29-2105236-00 | Amphenol PCD |
| 0 | |||
| 515-1192-1025-0DF | Dialight |
| 0 | |||
![]() PUI | 12.92107 | 1,890 | ||||
| 12.89210 | 8 | |||||
![]() Rutronik | 999-19-210-00 | PRECI-DIP SSA | 02P JUMPER 2.54MM BLACK CLOS RoHS : Compliant |
| 18,000 | |
| PE-92108KNL | Pulse Electronics Corporation | PE-921XXK 100uH 3000mA RoHS : Compliant |
| 1,320 | ||
| 999-19-210-02 | PRECI-DIP SSA | 02P JUMPER 2.54MM RED CLOS RoHS : Compliant |
| 1,000 | ||
![]() Chip 1 Exchange | 02-09-2103 | Molex | INSTOCK RoHS : Compliant | 275,974 | ||
| 52892-1033 | Molex | INSTOCK RoHS : Compliant | 83,645 | |||
| 592104-1 | TE Connectivity | INSTOCK RoHS : Compliant | 34,817 | |||
| 528921090- | INSTOCK | 3,000 | ||||
| 207992-1013 | Molex | INSTOCK | 2,990 | |||
| 36921-0402 | Molex | INSTOCK | 2,486 | |||
| 36921-0503 | Molex | INSTOCK | 1,842 | |||
| 36921-0502 | Molex | INSTOCK | 1,807 | |||
| PX0921/03/S | Bulgin | INSTOCK RoHS : Compliant | 1,536 | |||
| IRFR9210 | INSTOCK | 204 | ||||
| 1429-2105 | Xicon Passive Components | INSTOCK | 100 | |||
| 592104-1 | INSTOCK | 77 | ||||
| 70292-101 | INSTOCK | 11 | ||||
| GH92-10728A | Samsung Electro-Mechanics | INSTOCK | 3 | |||
| GH92-10728A | INSTOCK | 1 | ||||
![]() Avnet Abacus | 2092101 | Molex | (Alt: 2092101) RoHS : Compliant | 189,000 | ||
| C10-730189-210 | Amphenol Corporation | (Alt: SLPRBBPSR) RoHS : Compliant | 110 | |||
| 1909210 | Phoenix Contact | FKCT 25 2ST FKCT252ST (Alt: 1909210) RoHS : Compliant | 0 | |||
| 50579210 | Molex | (Alt: 50579210) RoHS : Compliant | 0 | |||
| 754921022 | Molex | Conn Backplane Power HDR 4 POS Solder ST ThruHole 4 Terminal 1 Port Tube (Alt: 754921022) RoHS : Compliant | 0 | |||
| PE-92109K | Pulse Electronics Corporation | INDUCTOR (Alt: PE-92109K) RoHS : Not Compliant | 0 | |||
| 469921020 | Molex | Connector Housing MiniFit JR Power Receptacle 10 Position 42mm Crimp Straight Cable Mount Bag (Alt: 469921020) RoHS : Compliant | 0 | |||
| D10921-000 | TE Connectivity | (Alt: D10921-000) RoHS : Compliant | 0 | |||
| 2263921023 | Molex | ZeroHACHI Bl RS 2ckt 300mm disc Sn (Alt: 2263921023) RoHS : Compliant | 0 | |||
| 2263921023 | Molex | (Alt: 2263921023) RoHS : Compliant | 0 | |||
| PE-92102NL | Pulse Electronics Corporation | Toroidal Inductor 100 uH 26 A 100 Milliohm 20 (Alt: PE-92102NL) RoHS : Compliant | 0 | |||
| 985921-000 | TE Connectivity | (Alt: 985921-000) RoHS : Compliant | 0 | |||
| PXA921/02/S | Bulgin | (Alt: PXA921/02/S) RoHS : Compliant | 0 | |||
| 92192-10CALF | Amphenol Corporation | Connector Accessories Ejector Mechanism Black Stainless Finish Tray (Alt: 92192-10CALF) RoHS : Compliant | 0 | |||
| EXP-A921/07/S | Bulgin | (Alt: EXP-A921/07/S) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 10176921-08-F037LF | Amphenol Corporation | (Alt: 10176921-08-F037LF) RoHS : Compliant |
| 400 | |
| 10176921-08-F033LF | Amphenol Corporation | (Alt: 10176921-08-F033LF) RoHS : Compliant | 230 | |||
| PE-92102NL | Pulse Electronics Corporation | Toroidal Inductor, 100 uH, 2.6 A, 100 Milliohm, ? 20% (Alt: PE-92102NL) RoHS : Compliant | 0 | |||
| 10126492-101LF | Amphenol Corporation | (Alt: 10126492-101LF) RoHS : Compliant | 0 | |||
| 5192-101710-01 | Vishay Intertechnologies | (Alt: 5192-101710-01) RoHS : Compliant | 0 | |||
| 10176921-07-F027LF | Amphenol Corporation | FCI10176921-07-F027LF 60A AC WHIP CABLE (Alt: 10176921-07-F027LF) RoHS : Compliant | 0 | |||
| 10176921-08-F039LF | Amphenol Corporation | FCI10176921-08-F039LF 60A AC WHIP 4500MM (Alt: 10176921-08-F039LF) RoHS : Compliant | 0 | |||
| 10176921-04-F006LF | Amphenol Corporation | (Alt: 10176921-04-F006LF) RoHS : Compliant | 0 | |||
| 10176921-07-F026LF | Amphenol Corporation | (Alt: 10176921-07-F026LF) RoHS : Compliant | 0 | |||
| 10176921-04-F013LF | Amphenol Corporation | (Alt: 10176921-04-F013LF) RoHS : Compliant | 0 | |||
| 10176921-04-F012LF | Amphenol Corporation | (Alt: 10176921-04-F012LF) RoHS : Compliant | 0 | |||
| GSP2.9210.14 | Schurter Electronic Components | (Alt: GSP2.9210.14) RoHS : Compliant | 0 | |||
| 10166892-10LF | Amphenol Corporation | 1.5MM DOUBLE ROW TERMINA-L (Alt: 10166892-10LF) RoHS : Compliant | 0 | |||
| 10176921-08-F035LF | Amphenol Corporation | (Alt: 10176921-08-F035LF) RoHS : Compliant | 0 | |||
| 93992-103HALF | Amphenol Corporation | (Alt: 93992-103HALF) RoHS : Compliant | 0 | |||
![]() Avnet Silica | FID9210 | onsemi | (Alt: FID9210) RoHS : Compliant | 0 | ||
| NCIV9210 | onsemi | High Speed DualChannel BiDirectional Ceramic Digital Isolator ONSSPCISTNJZ8E4V (Alt: NCIV9210) RoHS : Compliant | 0 | |||
| FID9210R2 | onsemi | (Alt: FID9210R2) RoHS : Compliant | 0 | |||
| 8T39210NLGI | Renesas Electronics Corporation | (Alt: 8T39210NLGI) RoHS : Compliant | 0 | |||
| IS9-2100AEH-Q | Renesas Electronics Corporation | (Alt: IS9-2100AEH-Q) RoHS : Compliant | 0 | |||
| IS9-2100ARH-8 | Renesas Electronics Corporation | (Alt: IS9-2100ARH-8) RoHS : Compliant | 0 | |||
| PD69210R-034900 | Microchip Technology Inc | MCU for PD692xx family based PD69210 FW Ver 349 (Alt: PD69210R-034900) RoHS : Compliant | 0 | |||
| IS9-2100ARHR5863 | Renesas Electronics Corporation | MRadiation Hardened High Frequency Half Bridge Drivers (Alt: IS9-2100ARHR5863) RoHS : Compliant | 0 | |||
| IS9-2100ARH/PROTO | Renesas Electronics Corporation | (Alt: IS9-2100ARH/PROTO) RoHS : Compliant | 0 | |||
| R7S921046VCBG#BC0 | Renesas Electronics Corporation | (Alt: R7S921046VCBG#BC0) RoHS : Compliant | 0 | |||
| R7S921052VCBG#BC0 | Renesas Electronics Corporation | (Alt: R7S921052VCBG#BC0) RoHS : Compliant | 0 | |||
| R7S921056VCBG#AC0 | Renesas Electronics Corporation | MPU RZA2M RISC 32Bit 528MHz 256BallLFBGA Tray (Alt: R7S921056VCBG#AC0) RoHS : Compliant | 0 | |||
| R7S921043VCBG#AC0 | Renesas Electronics Corporation | (Alt: R7S921043VCBG#AC0) RoHS : Compliant | 0 | |||
| R7S921041VCBG#BC0 | Renesas Electronics Corporation | (Alt: R7S921041VCBG#BC0) RoHS : Compliant | 0 | |||
| PD69210R-034900-TR | Microchip Technology Inc | PoE PSE controller capable of supporting IEEE 8023afatbt standards in a 32pin QFN package (Alt: PD69210R-034900-TR) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | AX7DAF1-921.0000T![]() | Abracon Corporation | XTAL OSC XO 921.0000MHZ LVDS SMD RoHS : Compliant |
| 0 | |
![]() Chip-Germany GmbH | EL9210 | Beckhoff Automation GmbH | RoHS : Compliant | 4 | ||
![]() Component Electronics, Inc | 0002092105 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 10,600 | |
| 02-09-2105 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 10,600 | ||
| 8-1192108-2 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,450 | ||
| 9338-592-10215 | NXP Semiconductors | IN STOCK SHIP TODAY |
| 1,160 | ||
| 521-9210 | Dialight | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 935 | ||
| 9921-013-1000 | Belden Inc | IN STOCK SHIP TODAY |
| 500 | ||
| 9210-N-115-0 | Amatom Electronic Hardware | IN STOCK SHIP TODAY |
| 131 | ||
| 192-104QET-A01 | Honeywell Sensing and Control | IN STOCK SHIP TODAY RoHS : Compliant |
| 79 | ||
| 02-09-2103 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 70 | ||
| 592-10-114-13-005014 | Mill-Max Mfg Corp | IN STOCK SHIP TODAY |
| 57 | ||
| IRFR9210 | International Rectifier | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 19 | ||
| 192-103LFD-A04 | Fenwal Controls | IN STOCK SHIP TODAY | 17 | |||
| 9210-76 | JW Miller | IN STOCK SHIP TODAY |
| 5 | ||
| 9210 | CAPITAL ADAV | IN STOCK SHIP TODAY |
| 3 | ||
| 1100921001 | Weidmüller Interface GmbH & Co. KG | IN STOCK SHIP TODAY RoHS : Compliant |
| 2 | ||
![]() DB Roberts | 9210 | Heyco | DF 217-236 NATURAL | 0 | ||
| 47-80-292-10 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-16-292-10 | Southco | 0 | ||||
| 47-91-392-10 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 34009210 | Essentra Components | GASKET 50 METRE | 0 | |||
| 1692-1032-S | RAF Electronic Hardware | 0 | ||||
| 2692-1032-S | RAF Electronic Hardware | 0 | ||||
| 1692-1032-A | RAF Electronic Hardware | 0 | ||||
| 47-10-692-10 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-62-592-10 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-11-392-10 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-81-692-10 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 5921000 | SHEREX FASTENING SO | 0 | ||||
| E2-92-102 | Southco | 0 | ||||
| 47-11-592-10 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
![]() EBV Elektronik | IRFU9210PBF | Vishay Intertechnologies | (Alt: IRFU9210PBF) RoHS : Compliant | 2,100 | ||
IRFR9210TRPBF![]() | Vishay Intertechnologies | (Alt: IRFR9210TRPBF) RoHS : Compliant | 2,000 | |||
LAN9210-ABZJ![]() | Microchip Technology Inc | (Alt: LAN9210-ABZJ) RoHS : Compliant | 0 | |||
IRFR9210TRLPBF![]() | Vishay Intertechnologies | (Alt: IRFR9210TRLPBF) RoHS : Compliant | 0 | |||
| PD69210R-034900 | Microchip Technology Inc | MCU for PD692xx family based PD69210 FW Ver 349 (Alt: PD69210R-034900) RoHS : Compliant | 0 | |||
| TLE92102QVWXUMA1 | Infineon Technologies AG | (Alt: SP006079528) RoHS : Compliant | 0 | |||
| MP-1919-2100-27-90 | Luminus Devices | LED UniColor 91lm 2700K Chip LED 2Pin SMD TR (Alt: MP-1919-2100-27-90) RoHS : Compliant | 0 | |||
| MP-1919-2101-27-80 | Luminus Devices | LED UniColor 119lm 2700K Chip LED 2Pin SMD TR (Alt: MP-1919-2101-27-80) RoHS : Compliant | 0 | |||
| MP-1919-2100-30-80 | Luminus Devices | LED UniColor 114lm 3000K Chip LED 2Pin SMD TR (Alt: MP-1919-2100-30-80) RoHS : Compliant | 0 | |||
| MP-1919-2100-40-90 | Luminus Devices | LED UniColor 108lm 4000K Chip LED 2Pin SMD TR (Alt: MP-1919-2100-40-90) RoHS : Compliant | 0 | |||
| MP-1919-2101-40-80 | Luminus Devices | LED UniColor 133lm 4000K Chip LED 2Pin SMD TR (Alt: MP-1919-2101-40-80) RoHS : Compliant | 0 | |||
| MP-1919-2100-50-90 | Luminus Devices | LED UniColor 108lm 5000K Chip LED 2Pin SMD TR (Alt: MP-1919-2100-50-90) RoHS : Compliant | 0 | |||
| MP-1919-2101-50-80 | Luminus Devices | LED UniColor 133lm 5000K Chip LED 2Pin SMD TR (Alt: MP-1919-2101-50-80) RoHS : Compliant | 0 | |||
| MP-1919-2101-27-90 | Luminus Devices | LED UniColor 101lm 2700K Chip LED 2Pin SMD TR (Alt: MP-1919-2101-27-90) RoHS : Compliant | 0 | |||
| CM8071505092103S RMX0 | Intel Corporation | INTEL CORE I3 14100T RAPTOR LAKE CPU (Alt: 99CC86) RoHS : Compliant | 0 | |||
![]() ECCO | M8372359210AR | Amphenol PCD |
| 3 | ||
| JANM83723/59-210AR | Amphenol PCD |
| 3 | |||
![]() Flip Electronics | R7S921058VCBG#AC0 | Renesas Electronics Corporation | Stock RoHS : Compliant | 10,050 | ||
| R7S921053VCBG#BC0 | Renesas Electronics Corporation | Stock RoHS : Compliant | 1,344 | |||
| R7S921051VCBG#AC0 | Renesas Electronics Corporation | Stock RoHS : Compliant | 1,228 | |||
| R7S921058VCBG#BC0 | Renesas Electronics Corporation | Stock RoHS : Compliant | 672 | |||
| R7S921048VCBG#AC0 | Renesas Electronics Corporation | Stock RoHS : Compliant | 654 | |||
| R7S921046VCBG#AC0 | Renesas Electronics Corporation | Stock RoHS : Compliant | 525 | |||
M4A3-384/192-10FANC![]() | Lattice Semiconductor Corporation | Stock RoHS : Compliant | 100 | |||
![]() Master Electronics | 2719210000 | Weidmüller Interface GmbH & Co. KG | SFM 4/12 3.3-4.0 MM WS RoHS : Compliant |
| 3,600 | |
| 9210 | HH Smith | Aluminum Round Spacer - #6 ID - 1/4 OD - 9/16 Length. RoHS : Compliant |
| 240 | ||
| D10921-000 | TE Connectivity | RPS-1K-10-2/2.0-S3-9 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 80-0009-0921-0 | 3M Interconnect | .100 LOW PROFILE STRAIGHT RoHS : Compliant |
| 0 | ||
| PD39210C-011019 | Microchip Technology Inc | MCU for PD392xx family based PD39210 FW Ver 1.10.19 RoHS : Compliant |
| 0 | ||
| FW-02-03-FM-D-192-102 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-G-D-292-107 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-LM-D-169-210 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-LM-D-292-105 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| CC92-106-SN-M12-DOUB | TE Connectivity | Single Cleat Assemblies RoHS : Compliant |
| 0 | ||
| 6609921-0 | TE Connectivity | PECS0DHX0=C1414 RoHS : Compliant |
| 0 | ||
| 699-2102-05 | Marathon Special Products | Conn Barrier Strip 5 POS 11.1mm Screw Panel Mount 20A RoHS : Compliant |
| 0 | ||
| 5-1879210-3 | TE Connectivity | Thin Film Resistor - SMD 0402 - 487 ohm (+/-) 0.1% - 1/16 W - 25V - TCR (+/-) 25ppm/°C - -55°C to +155°C - Tape&Reel RoHS : Compliant |
| 0 | ||
| 392-1023-000 | ITT Interconnect Solutions | Insulator Assyshorteneddpx2Ne67322-.. RoHS : Compliant |
| 0 | ||
| TW-07-06-F-D-192-100-010 | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W01992-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. BNC Male to BNC Male Right Angle Cable 100 cm Length Using LMR-195 Coax., Radio frequency assembly BNC male to BNC male right angle cable 100 cm length using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. BNC male to BNC male right angle cable 100 cm length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and right angle BNC cable connection on the other. Our low loss BNC to right angle BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3W01992-100CM, can also be known as a low loss BNC plug to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3W01992-100CM is built with LMR-195 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency BNC male to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W01992-100CM can also be used in the other direction and will be right angle BNC male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male right angle cable 100 cm length using LMR-195 coax. |
| 830 | |
| PE9210 | Pasternack Enterprises | Key Specifications, Connector Series 1: HN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: HN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 3 GHz, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Body Material 1: Brass, Connector Body Plating 1: Nickel, Connector Mount Method 2: None, Connector Body Material 2: Brass, Connector Body Plating 2: Nickel. HN Male to HN Male Adapter. HN adapter PE9210 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. Our HN to HN adapter is a in-series coaxial adapter design. This 50 Ohm HN adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 3 GHz. HN male to HN male adapter is one of the many RF components that ship same day as they are ordered. PE9210 male HN to male HN adapter has a straight body. This Pasternack straight HN coax adapter is a in-line RF adapter. Our male HN to male HN adapter PE9210 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This HN to HN radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. RoHS : Compliant |
| 246 | ||
| PE3C8492-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. Fire Rated N Male to N Female Bulkhead Low PIM Cable 100 CM Length Using SPF-250 Coax Using Times Microwave Parts., Radio frequency assembly fire rated N male to N female bulkhead low PIM cable 100 cm length using SPF-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Fire rated N male to N female bulkhead low PIM cable 100 cm length using SPF-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and type N bulkhead cable connection on the other. Our low PIM type N to N type cable assemblies have a male gender on end 1 and female on end 2. This type N to type N cable is a male to female coax assembly, PE3C8492-100CM, can also be known as a low PIM N type plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3C8492-100CM is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N male to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8492-100CM can also be used in the other direction and will be type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Low PIM N type plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated N male to N female bulkhead low PIM cable 100 cm length using SPF-250 coax using Times Microwave parts. |
| 52 | ||
| PE3C6192-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. Plenum 7/16 DIN Male to N Male Low PIM Cable 100 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 7/16 DIN male to N male low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 7/16 DIN male to N male low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-716M-LP 7/16 DIN cable connection on one end and TC-250-NM-LP type N cable connection on the other. Our low PIM TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP N type cable assemblies have a male gender on end 1 and male on end 2. This TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP type N cable is a male to male coax assembly, PE3C6192-100CM, can also be known as a low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-250-NM-LP type N plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-716M-LP 7/16 DIN plug to TC-250-NM-LP N type plug cable assembly PE3C6192-100CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-716M-LP 7/16 DIN cable assembly is manufactured with TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-716M-LP 7/16 DIN male to TC-250-NM-LP type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6192-100CM can also be used in the other direction and will be TC-250-NM-LP N type male to TC-SPP250-716M-LP 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-250-NM-LP type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-716M-LP 7/16 DIN to TC-250-NM-LP type N cable assembly for quick shipment worldwide. Variations of TC-SPP250-716M-LP 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 7/16 DIN male to N male low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts. |
| 42 | ||
| PE3FCA392-10M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 60 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: APC, Connector 2 Series: SC, Connector 2 Polish Type: APC, Jacket Burn Rating: OFNP, Cable Diameter: 5.6 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. 8-Fiber SC APC to SC APC, OS2 Single Mode Distribution Cable, 5.6mm Plenum, 2.0mm breakout, Yellow-10M. Pasternack’s PE3FCA392-10M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long 8-fiber cable assembly is equipped with SC/APC to SC/APC connectors. Our yellow fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 8-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA392-10M fiber optic cable with a 5.6 mm cable diameter and 42 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of SC/APC to SC/APC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 25 | ||
| PE3C5892-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. Plenum N Male to SMA Male Right Angle Low PIM Cable 100 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA male right angle low PIM cable 100 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA male right angle low PIM cable 100 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with N type cable connection on one end and right angle SMA cable connection on the other. Our low PIM type N to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This type N to SMA cable is a male to male coax assembly, PE3C5892-100CM, can also be known as a low PIM type N plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. N type plug to SMA plug cable assembly PE3C5892-100CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM N type male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5892-100CM can also be used in the other direction and will be right angle SMA male to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA male right angle low PIM cable 100 cm length using SPP-250-LLPL coax, LF solder. |
| 8 | ||
| PE3C100092-10CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: MHF1, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, RF Cable Impedance: 50 Ohm, Length, Max: 3.93 inches. MHF1 to SMA Female Bulkhead (with O-ring) Cable Assembly Using O.D. 0.81mm Cable, length = 100mm., Pasternack’s PE3C100092-10CM MHF1 to SMA female bulkhead RF cable assembly is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MHF1 to SMA female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MHF1 to SMA cable assembly orders will ship the same business day as well. Pasternack RF cable assembly is built with an MHF1 cable connection on one end and an SMA bulkhead cable connection on the other. PE3C100092-10CM can also be known as an MHF1 to SMA jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.032-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The MHF1 to SMA cable from Pasternack is ideal for applications including external antenna connection (Wi-Fi, Bluetooth, LTE, 5G, and GPS receivers), improving signal strength (embedded systems inside metal enclosures), prototyping and development and IoT and embedded systems (drones and robotics). The minimum bend radius for this cable is 0.196 inches, allowing for a single bend without damaging the cable. Our PE3C100092-10CM RF cable has an FEP jacket of 0.032-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 90 degrees C. This cable assembly has a typical propagation velocity of 69%. Our MHF1 to bulkhead SMA female cable has a maximum VSWR of 1.5:1. This single shielded cable assembly has a tinned copper shield layer. The Pasternack MHF1 cable assembly is manufactured with MHF1 to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Additional dimensions, specifications, and CAD drawings for this 3.93-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100092-10CM can also be used in the other direction and will be an SMA jack bulkhead to MHF1 cable assembly if the opposite connectivity is required. This MHF1 to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MHF1 to SMA cable assembly for quick shipment worldwide. Variations of MHF1 and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MHF1 to SMA RF cable assembly as per your requirements. |
| 3 | ||
| PE7492-10 | Pasternack Enterprises | Key Specifications. Attenuator Design Fixed Active/Passive Passive Connector-In Impedance 50 Ohms Max Freq 6 GHz Nominal Attenuation 10 dB VSWR, Max 1.25:1 Input Power, Max (CW) 5 Watts Body Material Brass Connector-In Series 2.2-5 Connector-In Gender Male Connector-Out Series 2.2-5 Connector-Out Gender Female Max Operating Temperature 75 deg C Min Operating Temperature -40 deg C. 10 dB Fixed Attenuator, 2.2-5 Male to 2.2-5 Female Brass Body Rated to 5 Watts, DC to 6 GHz. PE7492-10 is a fixed 10 dB attenuator from Pasternack. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. This connectorized RF attenuator comes with a 1 dB of maximum attenuation accuracy. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. Pasternack’s PE7492-10 fixed attenuator is available with a maximum attenuation accuracy of 1 dB. The max input power rating (CW) of this RF attenuator is 5 Watts. This attenuator has a maximum VSWR of 1.25:1 and operates between -40 and 75 deg C. Our fixed radio frequency attenuator with 2.2-5 connectors is constructed with brass body material and copper-tin-zinc alloy plating. The connectorized bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 10 dB fixed attenuator has a silver-plated beryllium copper inner conductor. This 2.2-5 attenuator has a male gender on side 1 and a 2.2-5 female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 10 dB. The Pasternack PE7492-10 attenuator is rated for up to 6 GHz. This coaxial attenuator is also suitable for instrumentation, precision measurements, prototyping and characterization, production systems and 5G cellular bands applications. The 10 dB attenuator has a brass connector built with tri-metal plating. Our fixed RF attenuator PE7492-10 is shipped same-day as purchased from Pasternack’s production facility, which is certified to ISO 9001:2015. This 10 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 2 | ||
| PE3FCA492-10M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: APC, Jacket Burn Rating: LSZH, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex LC UPC to SC APC, SM OS2, 2.0mm LSZH, Yellow-10M. Pasternack’s PE3FCA492-10M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long simplex cable assembly is equipped with LC/UPC to SC/APC connectors. Our yellow fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA492-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. This PE3FCA492-10M fiber optic cable with a 2 mm cable diameter and 15 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of simplex LC/UPC to SC/APC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3W05692-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMP Female Right Angle to SMA Female 2 Hole Flange Cable 100 cm Length Using PE-047SR Coax., Radio frequency assembly SMP female right angle to SMA female 2 hole flange cable 100 cm length using PE-047SR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMP female right angle to SMA female 2 hole flange cable 100 cm length using PE-047SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and SMA 2 hole flange cable connection on the other. Our right angle SMP to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMP to SMA cable is a female to female coax assembly, PE3W05692-100CM, can also be known as a right angle SMP jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMA jack cable assembly PE3W05692-100CM is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMP right angle female to SMA female 2 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05692-100CM can also be used in the other direction and will be SMA female 2 hole flange to right angle SMP female cable assembly if the opposite connectivity is required. SMP right angle jack to SMA jack 2 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female right angle to SMA female 2 hole flange cable 100 cm length using PE-047SR coax. |
| 0 | ||
| PE3C8392-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.2-5, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 2.2-5 Male to N Female Bulkhead Low PIM Cable 100 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 2.2-5 male to N female bulkhead low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.2-5 male to N female bulkhead low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.2-5 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 2.2-5 cable connection on one end and a type N bulkhead cable connection on the other. Our low PIM 2.2-5 to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C8392-100CM can also be known as a low PIM 2.2-5 plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.748-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 2.2-5 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8392-100CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 2.2-5 male to bulkhead type N female cable has a maximum VSWR of 1.4:1. 2.2-5 plug to type N jack cable assembly PE3C8392-100CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 2.2-5 cable assembly is manufactured with 2.2-5 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8392-100CM can also be used in the other direction and will be a type N female bulkhead to 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to type N cable assembly for quick shipment worldwide. Variations of 2.2-5 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.2-5 to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C7992-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Copper Clad Aluminum, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 39.37 inches. 7/16 DIN Male to 7/16 DIN Male Right Angle Low PIM Cable 100 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 7/16 DIN male to 7/16 DIN male right angle low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to 7/16 DIN male right angle low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 7/16 DIN cable connection on one end and a right angle 7/16 DIN cable connection on the other. Our low PIM 7/16 DIN to right angle 7/16 DIN cable assembly has a male gender on end 1 and a male on end 2. PE3C7992-100CM can also be known as a low PIM 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.25-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 7/16 DIN low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C7992-100CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 150 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 7/16 DIN male to right angle 7/16 DIN male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3C7992-100CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with copper clad aluminum plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C7992-100CM can also be used in the other direction and will be a right angle 7/16 DIN male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to 7/16 DIN right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to 7/16 DIN low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3W09210 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Snap-On MMBX Plug Right Angle to SMA Female Cable Using RG316 Coax. PE3W09210 is a MMBX plug right angle to SMA female cable using RG316 coax. This Pasternack MMBX plug right angle to SMA female cable assembly uses a 50 Ohm MMBX for connector 1 and a 50 Ohm SMA for connector 2. MMBX right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMBX right angle to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W09210 MMBX plug right angle to SMA female cable assembly is constructed with RG316 coax. | 0 | |||
| PE39210 | Pasternack Enterprises | 0 | ||||
| PE3C9210 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402TN, RF Cable Type: RG402 Tinned, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to TNC Female Bulkhead Cable Using Tinned RG402 Coax. PE3C9210 is a TNC male right angle to TNC female bulkhead cable using RG402 Tinned coax. This Pasternack TNC male right angle to TNC female bulkhead cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. TNC right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to female TNC bulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3C9210 TNC male right angle to TNC female bulkhead cable assembly is constructed with RG402 Tinned coax. | 0 | |||
![]() Vyrian | LTC1992-10HMS8#PBF | Analog Devices Inc | Operational Amplifier, 1 Func, 4000uV Offset-Max, CMOS, PDSO8 RoHS : Compliant | 11,552 | ||
| LTC1992-10IMS8#TRPBF | Analog Devices Inc | Operational Amplifier, 1 Func, 2500uV Offset-Max, CMOS, PDSO8 RoHS : Compliant | 11,340 | |||
| LTC1992-10HMS8-PBF | Analog Devices Inc | 11,200 | ||||
| LTC1992-10CMS8-PBF | Analog Devices Inc | 10,007 | ||||
| LTC1992-10HMS8-TRPBF | Analog Devices Inc | 9,887 | ||||
| LTC1992-10CMS8 | Analog Devices Inc | Operational Amplifier, 1 Func, 2500uV Offset-Max, CMOS, PDSO8 RoHS : Not Compliant | 9,494 | |||
| LTC1992-10IMS8 | Analog Devices Inc | Operational Amplifier, 1 Func, 2500uV Offset-Max, CMOS, PDSO8 RoHS : Not Compliant | 8,394 | |||
| LTC1992-10IMS8#TR | Analog Devices Inc | Operational Amplifier, 1 Func, 2500uV Offset-Max, CMOS, PDSO8 RoHS : Not Compliant | 8,193 | |||
| LTC1992-10CMS8-TRPBF | Analog Devices Inc | 7,899 | ||||
| LTC1992-10HMS8#TRPBF | Analog Devices Inc | Operational Amplifier, 1 Func, 4000uV Offset-Max, CMOS, PDSO8 RoHS : Compliant | 7,506 | |||
| LTC1992-10CMS8#TRPBF | Analog Devices Inc | Operational Amplifier, 1 Func, 2500uV Offset-Max, CMOS, PDSO8 RoHS : Compliant | 7,486 | |||
| LTC1992-10CMS8#PBF | Analog Devices Inc | Operational Amplifier, 1 Func, 2500uV Offset-Max, CMOS, PDSO8 RoHS : Compliant | 7,312 | |||
| LTC1992-10HMS8 | Analog Devices Inc | Operational Amplifier, 1 Func, 4000uV Offset-Max, CMOS, PDSO8 RoHS : Not Compliant | 6,407 | |||
| LTC1992-10CMS8#TR | Analog Devices Inc | Operational Amplifier, 1 Func, 2500uV Offset-Max, CMOS, PDSO8 RoHS : Not Compliant | 5,820 | |||
| LTC1992-10HMS8#TR | Analog Devices Inc | Operational Amplifier, 1 Func, 4000uV Offset-Max, CMOS, PDSO8 RoHS : Not Compliant | 5,780 | |||
![]() Win Source Electronics | TPS629210DRLR | Texas Instruments | 3-V TO 17-V, 1-A, HIGH-EFFICIENC RoHS : Compliant |
| 68,950 | |
| TPS629210DRLR-ET | Texas Instruments | IC REG BUCK ADJ 1A SOT583 RoHS : Compliant |
| 67,800 | ||
| TLE92108232QXXUMA1 | Infineon Technologies AG | IC MOSFET DRIVER ADAPTIVE RoHS : Compliant |
| 13,640 | ||
| TPS629210QDRLRQ1 | Texas Instruments | RoHS : Compliant |
| 8,000 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |