854ACNSMNTZCWC Price, Reseller, Stock

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male to TNC Male Right Angle Low Loss Cable 48 Inch Length Using LMR-240 Coax., Radio frequency assembly N male to TNC male right angle low loss cable 48 inch length using LMR-240 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male right angle low loss cable 48 inch length using LMR-240 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and right angle TNC cable connection on the other. Our low loss type N to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C2885-48 can also be known as a low loss type N plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to TNC plug cable assembly PE3C2885-48 is built with LMR-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2885-48 can also be used in the other direction and will be right angle TNC male to type N male cable assembly if the opposite connectivity is required. Low loss N type plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male right angle low loss cable 48 inch length using LMR-240 coax.

1 : $87.99
25 : $83.59
50 : $79.19
100 : $75.67

1,555

PE3C3854

Pasternack Enterprises

Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. Snap-On MMBX Plug to SMA Male Cable Using RG316-DS Coax. PE3C3854 is a MMBX plug to SMA male cable using RG316-DS coax. This Pasternack MMBX plug to SMA male cable assembly uses a 50 Ohm MMBX for connector 1 and a 50 Ohm SMA for connector 2. Our plug MMBX to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3854 MMBX plug to SMA male cable assembly is constructed with RG316-DS coax and the maximum VSWR is 1.35:1.

234

PE3W08544-24

Pasternack Enterprises

Key Specifications, Connector Series 1: MHV, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MHV, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length: 24 inches. MHV Male to MHV Male Cable 24 Inch Using RG223 Coax., Radio frequency assembly MHV male to MHV male cable 24 inch using RG223 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MHV male to MHV male cable 24 inch using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MHV to MHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MHV cable connection on one end and MHV cable connection on the other. Our MHV to MHV cable assemblies have a male gender on end 1 and male on end 2. This MHV to MHV cable is a male to male coax assembly, PE3W08544-24, can also be known as a MHV plug to MHV plug cable assembly and will be shipped same-day as it is purchased. MHV plug to MHV plug cable assembly PE3W08544-24 is built with RG223 which is a flexible coax type. The Pasternack flexible MHV cable assembly is manufactured with MHV to MHV cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency MHV male to MHV male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. MHV plug to MHV plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MHV to MHV cable assembly for quick shipment worldwide. Variations of MHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MHV male to MHV male cable 24 inch using RG223 coax.

1 : $71.99
25 : $68.39
50 : $64.79
100 : $61.91

158

PE3W06854/HS2-24

Pasternack Enterprises

Key Specifications, Connector Series 1: QN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 24 inches. QN Male to Reverse Polarity SMA Female Bulkhead Cable 24 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly QN male to reverse polarity SMA female bulkhead cable 24 inch length using LMR-195 coax with double heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QN male to reverse polarity SMA female bulkhead cable 24 inch length using LMR-195 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QN to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with QN cable connection on one end and reverse polarity SMA bulkhead cable connection on the other. Our QN to reverse polarity SMA cable assemblies have a male gender on end 1 and female on end 2. This QN to reverse polarity SMA cable is a male to female coax assembly, PE3W06854/HS2-24, can also be known as a QN plug to reverse polarity SMA jack cable assembly and will be shipped same-day as it is purchased. QN plug to reverse polarity SMA jack cable assembly PE3W06854/HS2-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible QN cable assembly is manufactured with QN to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency QN male to reverse polarity SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06854/HS2-24 can also be used in the other direction and will be reverse polarity SMA female bulkhead to QN male cable assembly if the opposite connectivity is required. QN plug to SMA reverse polarity jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QN to SMA cable assembly for quick shipment worldwide. Variations of QN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QN male to reverse polarity SMA female bulkhead cable 24 inch length using LMR-195 coax with double heatshrink.

1 : $125.99
25 : $119.69
50 : $113.39
100 : $108.35

102

PE3W17854-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. NEX10 Male to NEX10 Male Low PIM Cable 60 Inch Length Using SPF-250 Coax., Radio frequency assembly NEX10 male to NEX10 male low PIM cable 60 inch length using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable 60 inch length using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and male on end 2. PE3W17854-60 can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17854-60 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 plug cable assembly PE3W17854-60 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements.

1 : $95.99
25 : $91.19
50 : $86.39
100 : $82.55

PE9854B-SF-30

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-62, Gain Min: 30, Beam Width, 3dB V: 5, Beam Width, 3dB H: 5, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz. WR-62 Waveguide Standard Gain Horn Antenna Operating from 12.4 GHz to 18 GHz with a Nominal 30 dB Gain SMA Female Input. The PE9854B-SF-30 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-62 input and a waveguide to coaxial transition adapter. Our WR-62 waveguide antenna features an SMA female connector. This single-band directional antenna comes with a UG-1665/U square cover flange. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use and microwave radio systems. Our WR-62 standard gain horn antenna with an SMA female input has a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. Pasternack’s PE9854B-SF-30 waveguide horn antenna has a typical gain of 30 dB. Our waveguide antenna has a typical vertical and horizontal beam width of 5 degrees at 3 dB. This antenna has a length of 25.21 inches, a width of 9.57 inches, and a weight of 0.52 lbs. This WR-62 waveguide horn antenna with 30 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this single-band directional antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $2,250.0
5 : $2,205.0
10 : $2,160.0
25 : $2,115.0

PE3854-72

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 72 inches. BNC Male to BNC Female Bulkhead Cable 72 Inch Length Using RG316 Coax., Radio frequency assembly BNC male to BNC female bulkhead cable 72 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC female bulkhead cable 72 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC bulkhead cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and female on end 2. This BNC to BNC cable is a male to female coax assembly, PE3854-72, can also be known as a BNC plug to BNC jack cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC jack cable assembly PE3854-72 is built with RG316 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency BNC male to BNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3854-72 can also be used in the other direction and will be BNC female bulkhead to BNC male cable assembly if the opposite connectivity is required. BNC plug to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC female bulkhead cable 72 inch length using RG316 coax.

1 : $69.99
25 : $66.49
50 : $62.99
100 : $60.19

PE3W04854-48

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 48 inches. BNC Male Right Angle to SMA Female Cable 48 Inch Length Using RG316 Coax., Radio frequency assembly BNC male right angle to SMA female cable 48 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male right angle to SMA female cable 48 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle BNC cable connection on one end and SMA cable connection on the other. Our right angle BNC to SMA cable assemblies have a male gender on end 1 and female on end 2. This BNC to SMA cable is a male to female coax assembly, PE3W04854-48, can also be known as a right angle BNC plug to SMA jack cable assembly and will be shipped same-day as it is purchased. BNC plug to SMA jack cable assembly PE3W04854-48 is built with RG316 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this BNC right angle male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04854-48 can also be used in the other direction and will be SMA female to right angle BNC male cable assembly if the opposite connectivity is required. BNC right angle plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male right angle to SMA female cable 48 inch length using RG316 coax.

1 : $79.99
25 : $75.99
50 : $71.99
100 : $68.79

PE3W05854/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMA Male to Reverse Polarity Push-On MCX Plug Right Angle Cable Using RG174 Coax with HeatShrink. PE3W05854/HS is a SMA male to reverse polarity MCX plug right angle cable using RG174 coax. This Pasternack SMA male to reverse polarity MCX plug right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MCX for connector 2. SMA to MCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to reverse polarity plug MCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05854/HS SMA male to MCX reverse polarity plug right angle cable assembly is constructed with RG174 coax.

PE3C8543

Pasternack Enterprises

PE3W04854-150CM

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 59.05 inches. BNC Male Right Angle to SMA Female Cable 150 cm Length Using RG316 Coax., Radio frequency assembly BNC male right angle to SMA female cable 150 cm length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male right angle to SMA female cable 150 cm length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle BNC cable connection on one end and SMA cable connection on the other. Our right angle BNC to SMA cable assemblies have a male gender on end 1 and female on end 2. This BNC to SMA cable is a male to female coax assembly, PE3W04854-150CM, can also be known as a right angle BNC plug to SMA jack cable assembly and will be shipped same-day as it is purchased. BNC plug to SMA jack cable assembly PE3W04854-150CM is built with RG316 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this BNC right angle male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04854-150CM can also be used in the other direction and will be SMA female to right angle BNC male cable assembly if the opposite connectivity is required. BNC right angle plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male right angle to SMA female cable 150 cm length using RG316 coax.

1 : $82.99
25 : $78.84
50 : $74.69
100 : $71.37

PE3W16854

Pasternack Enterprises

Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm. QMA Male to 4.3-10 Male Cable Using SPF-250 Coax. PE3W16854 is a QMA male to 4.3-10 male cable using SPF-250 coax. This Pasternack QMA male to 4.3-10 male cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm 4.3-10 for connector 2. Our male QMA to male 4.3-10 cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W16854 QMA male to 4.3-10 male cable assembly is constructed with SPF-250 coax.

PE9854B/NF-15

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-62, Gain Min: 15, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz. WR-62 Waveguide Standard Gain Horn Antenna Operating from 12.4 GHz to 18 GHz with a Nominal 15 dB Gain N Female Input. The PE9854B/NF-15 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-62 input and a waveguide to coaxial transition adapter. Our WR-62 waveguide antenna features a type N female connector. This single-band directional antenna comes with a flange. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use and microwave radio systems. Our WR-62 standard gain horn antenna with a type N female input has a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. Pasternack’s PE9854B/NF-15 waveguide horn antenna has a typical gain of 15 dB. This WR-62 waveguide horn antenna with 15 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this single-band directional antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a type N female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $2,240.0
5 : $2,150.4
10 : $2,060.8
25 : $1,971.2

PE9854B/SF-10

Pasternack Enterprises

Key Specifications, Gain Min: 10, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz. WR-62 Standard Gain Horn Antenna Operating From 12.4 GHz to 18 GHz, 10 dBi Nominal Gain, SMA Female Input Connector, ProLine. The PE9854B/SF-10 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Our waveguide antenna features an SMA female connector. This single-band directional antenna comes with a flange. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use and microwave radio systems. Our standard gain horn antenna with an SMA female input has a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. Pasternack’s PE9854B/SF-10 waveguide horn antenna has a typical gain of 10 dB. This antenna has a length of 2.61 inches, a width of 0.93 inches, and a weight of 0.5 lbs. This waveguide horn antenna with 10 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this single-band directional antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $2,060.0
5 : $1,977.6
10 : $1,895.2
25 : $1,812.8

PE3W03854/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. SMA Male to SMA Female 4 Hole Flange Cable Using RG142 Coax with HeatShrink. PE3W03854/HS is a SMA male to SMA female 4 hole flange cable using RG142 coax. This Pasternack SMA male to SMA female 4 hole flange cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to female SMA 4 hole flange cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03854/HS SMA male to SMA female 4 hole flange cable assembly is constructed with RG142 coax.

Vyrian

BAT854CWT/R

Nexperia

Rectifier Diode, Schottky, 2 Element, 0.2A, Silicon
RoHS : Compliant

13,799

MAX6854UK40D5+T

Analog Devices Inc

Power Supply Support Circuit, Fixed, 1 Channel, BICMOS, PDSO5
RoHS : Compliant

12,284

RJE59-188-5411

Amphenol Communications Solutions

Telecom and Datacom Connector, 8 Contact(s), Female, Right Angle, Solder Terminal, Jack

11,025

MAX6854UK34D2+T

Analog Devices Inc

Power Supply Support Circuit, Fixed, 1 Channel, BICMOS, PDSO5
RoHS : Compliant

10,927

MAX6854UK19D6

Analog Devices Inc

Power Supply Support Circuit, Fixed, 1 Channel, +1.9V, BICMOS, PDSO5
RoHS : Not Compliant

10,150

MAX6854UK21D3

Analog Devices Inc

Power Supply Support Circuit, Fixed, 1 Channel, +2.1V, BICMOS, PDSO5
RoHS : Not Compliant

9,748

MAX6854UK33D1+

Analog Devices Inc

Power Supply Support Circuit, Fixed, 1 Channel, +3.3V, BICMOS, PDSO5
RoHS : Compliant

9,609

MAX6854UK23D4+T

Analog Devices Inc

Power Supply Support Circuit, Fixed, 1 Channel, BICMOS, PDSO5
RoHS : Compliant

8,937

MPC8547VTATGA

Freescale Semiconductor

Microprocessor, 32-Bit, 1200MHz, CMOS, PBGA783
RoHS : Compliant

8,130

MAX6854UK22D3+

Analog Devices Inc

Power Supply Support Circuit, Fixed, 1 Channel, +2.188V, BICMOS, PDSO5
RoHS : Compliant

7,508

MAX6854UK32D1

Analog Devices Inc

Power Supply Support Circuit, Fixed, 1 Channel, +3.2V, BICMOS, PDSO5
RoHS : Not Compliant

6,855

MAX6854UK17D1+T

Analog Devices Inc

Power Supply Support Circuit, Fixed, 1 Channel, BICMOS, PDSO5
RoHS : Compliant

6,758

LP8548B1ASQX06

Texas Instruments

5,344

LP8547SQE-FS-NOPB

Texas Instruments

3,441

LTC2854CDD

Linear Technology

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, PDSO10
RoHS : Not Compliant

215

Waytek, Inc.

15418545

Aptiv PLC

3 Way TPA GT 150 Connector DELPHI 15418545

50 : $0.129
200 : $0.1224
500 : $0.1144
1,000 : $0.1097

4,875

15326854

Aptiv PLC

GT 150 Series, 12 Way Sealed Male Connector
RoHS : Compliant

1 : $1.8245
50 : $1.6291
100 : $1.2892
200 : $1.2468
500 : $1.2043
1,000 : $1.158

507

15418547

Aptiv PLC

5 Way TPA GT 150 Connector DELPHI 15418547

50 : $0.1309
200 : $0.1239
500 : $0.1154
1,000 : $0.1105

444

7010398854

3M EPS-300 heat shrink tubing is red polyolefin tubing with a 1/4" size for insulating and protecting wire, terminals, and splices. Its flexible thin-wall construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications.

1 : $7.12
10 : $6.73
50 : $6.48
100 : $6.17
500 : $5.96

220

882-854

Littelfuse Inc

ZCase 2 Way Bus Bar & Studs M8 Nuts Not Included
RoHS : Compliant

1 : $28.53
5 : $26.57
10 : $22.24
50 : $20.65
100 : $20.04
200 : $19.06

15418546

Aptiv PLC

4 Way TPA GT 150 Connector DELPHI 15418546

50 : $0.1218
200 : $0.1153
500 : $0.1074
1,000 : $0.1035

7100163854

22-18 GA #6 Snap Spade VINYL INSULATED TERMINAL

50 : $0.4454
200 : $0.4118
500 : $0.3741
1,000 : $0.3464
5,000 : $0.3296

Win Source Electronics

TLV8544PWR

Texas Instruments

IC OPAMP GP 4 CIRCUIT 14TSSOP
RoHS : Compliant

1,105 : $0.2717
825 : $0.3031
640 : $0.3135
465 : $0.324
300 : $0.3344
125 : $0.4076

54,430

AD8541ARTZ-REEL

Analog Devices Inc

General Purpose CMOS Rail-to-Rail Amplifiers | IC OPAMP GP 1 CIRCUIT SOT23-5
RoHS : Compliant

405 : $0.7453
305 : $0.8313
235 : $0.8599
170 : $0.8886
110 : $0.9173
45 : $1.1179

42,290

AD8542AR

Analog Devices Inc

IC OPAMP GP R-R CMOS 1MHZ 8SOIC / General Purpose Amplifier 2 Circuit Rail-to-Rail 8-SOIC
RoHS : Not Compliant

470 : $0.7197
375 : $0.7489
290 : $0.7782
205 : $0.8368
130 : $0.866
65 : $0.9244

37,000

AD8542ARMZREEL7

ADI Electronics Inc

227 : $1.3232
182 : $1.377
140 : $1.4308
98 : $1.5384
63 : $1.5922
30 : $1.6997

31,450

AD8541AKSZ-REEL7

Analog Devices Inc

IC OPAMP GP 1MHZ RRO SC70-5
RoHS : Compliant

147 : $2.05
118 : $2.1334
91 : $2.2167
63 : $2.3834
41 : $2.4667
19 : $2.6334

30,770

BAT854AW

Nexperia

Schottky barrier (double) diodes
RoHS : Compliant

235 : $1.456
175 : $1.624
135 : $1.68
100 : $1.736
65 : $1.792
30 : $2.184

30,000

AD8542ARU-REEL

Analog Devices Inc

IC OPAMP GP 2 CIRCUIT 8TSSOP / General Purpose Amplifier 2 Circuit Rail-to-Rail 8-TSSOP
RoHS : Not Compliant

355 : $1.1052
265 : $1.2327
205 : $1.2751
150 : $1.3177
100 : $1.3602
40 : $1.6576

15,809

AD8544ARZ-REEL7

Analog Devices Inc

IC OPAMP GP 1MHZ RRO 14SOIC
RoHS : Compliant

115 : $2.6149
86 : $2.9166
67 : $3.0172
49 : $3.1178
32 : $3.2183
13 : $3.9223

7,575

MAX8546EUB

Maxim Integrated Products

PLASTIC ENCAPSULATED DEVICES
RoHS : Not Compliant

105 : $3.2117
79 : $3.5823
61 : $3.7059
44 : $3.8294
29 : $3.9529
12 : $4.8176

5,050

LTC2854CDD

Linear Technology

3.3V 20Mbps RS485/RS422 Transceivers with Integrated Switchable Termination
RoHS : Not Compliant

52 : $6.5194
39 : $7.2717
30 : $7.5225
22 : $7.7731
14 : $8.0239
6 : $9.7792

2,500

CSD18542KTT

Texas Instruments

MOSFET N-CH 60V 200A DDPAK / N-Channel 60 V 200A (Ta) 250W (Tc) Surface Mount DDPAK/TO-263-3
RoHS : Compliant

129 : $2.6078
97 : $2.9088
75 : $3.009
55 : $3.1093
35 : $3.2096
15 : $3.9117

2,000

ADS8548SPMR

Texas Instruments

12-, 14-, 16-Bit, Eight-Channel, Simultaneous Sampling ANALOG-TO-DIGITAL CONVERTERS
RoHS : Compliant

28 : $12.4295
22 : $12.9348
17 : $13.44
12 : $14.4506
8 : $14.9558
4 : $15.9664

1,620

PM8546B-FEI

Microchip Technology Inc

Fanout PCIe Switch, PSX 96xG3, Gen 3, BBGA-1311, RoHS
RoHS : Compliant

1 : $656.8421

250

FLM7785-4F

SUMITOMO ELECTRIC Interconnect Products

High Power GaAs FETs, C-Band, 8.5dB, 7.7 8.5GHz, 1100mA

1 : $963.5294

150

MPC8548CVJAQGD

Nexperia

IC MPU MPC85XX 1.0GHZ 783FCBGA

1 : $1,086.5673

854ACNSMNTZCWC Reseller

Enlace URL