| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
7641ACPD Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
![]() TME | 2176411-7 | TE Connectivity | Resistor: metal oxide; 20kΩ; THT; 500mW; ±5%; Ø3.5x10mm; -55÷155°C RoHS : Compliant |
| 2,020 | |
| 76410-5807 | Molex | Connector: DIN 41612; plug; male; data; PIN: 72; angled; 0.75A; 1.9mm RoHS : Compliant |
| 761 | ||
| 74764-1051 | Molex | 500mm; 30AWG |
| 118 | ||
| 2764179 | Phoenix Contact | Upper housing; EG 45; green; UL94HB; ABS; for DIN rail mounting RoHS : Compliant |
| 51 | ||
| 07.6411915 | Italtronic srl | Enclosure base; green; 191.5mm |
| 37 | ||
| 07.6410700 | Italtronic srl | Enclosure base; green; 70mm |
| 0 | ||
| 6-2176412-8 | TE Connectivity | Resistor: metal oxide; 3.3kΩ; THT; 5W; ±5%; Ø6.5x17.5mm; -55÷155°C RoHS : Compliant |
| 0 | ||
| 7-2176415-9 | TE Connectivity | Resistor: metal oxide; 51kΩ; THT; 8W; ±5%; Ø8.5x41mm; axial; L: 41mm RoHS : Compliant |
| 0 | ||
| 1764100000 | Weidmüller Interface GmbH & Co. KG | End piece; blue; wemid; L: 82.2mm; W: 3mm RoHS : Compliant |
| 0 | ||
| 2764182 | Phoenix Contact | Upper housing; EG 45; UL94HB; ABS; for DIN rail mounting; X: 45mm RoHS : Compliant |
| 0 | ||
| 7789764125 | Weidmüller Interface GmbH & Co. KG | 7789764125 |
| 0 | ||
| 97-641-9 | NEO TOOLS | Protective gloves; Size: 9; black-orange; polyester; Safety cat: 2 |
| 0 | ||
| M7-094-1-7641-YL | Brady Worldwide Inc | Marker: cable-heat shrinkable; 44.45mm; yellow; -55÷105°C |
| 0 | ||
| M7-125-1-7641 | Brady Worldwide Inc | Marker: cable-heat shrinkable; white; Shrinking ratio: 2: 1 |
| 0 | ||
| M7-500-1-7641 | Brady Worldwide Inc | Marker: cable-heat shrinkable; white; Shrinking ratio: 2: 1 |
| 0 | ||
![]() Avnet Americas | 44764-1002 | Molex | PCB Receptacle, 10 Contacts, 2 Rows, 3mm, Gold, 8.5A, THT, Right Angle, Phosphor Bronze, Solder, LCP - Trays (Alt: 0447641002) RoHS : Compliant |
| 139 | |
| 44764-1802 | Molex | - Trays (Alt: 0447641802) RoHS : Compliant |
| 0 | ||
| B88069X7641T702 | TDK Corporation | Surge Arrestor 2-Electrode 5KA 350V 2-Pin Surface Mount T/R - Tape and Reel (Alt: B88069X7641T702) RoHS : Compliant |
| 0 | ||
| 76410-7107 | Molex | Backplane Connector, 90 Contacts, 9 Rows, Through Hole Mount, Right Angle, Impact 76410 Series, Gold - Trays (Alt: 0764107107) RoHS : Compliant |
| 0 | ||
| 44764-1401 | Molex | PCB Receptacle, 14 Contacts, 2 Rows, 3mm, Tin, 8.5A, THT, Right Angle, Phosphor Bronze, Solder, LCP - Trays (Alt: 0447641401) RoHS : Compliant |
| 0 | ||
| 74764-1101 | Molex | Network Cable, Plug-Plug, 1 m L, Twinax, 74764 Series, QSFP+-to-4 SFP+ Passive Cable Assembly - Bulk (Alt: 0747641101) RoHS : Compliant |
| 0 | ||
| RP7641G332 | TE Connectivity | - Bag (Alt: 4-1617041-1) RoHS : Not Compliant |
| 0 | ||
| 87-432764-19P | Amphenol Corporation | - Bulk (Alt: 87-432764-19P) RoHS : Not Compliant |
| 0 | ||
| RP7641G340 | TE Connectivity | - Bag (Alt: 4-1617041-2) RoHS : Not Compliant |
| 0 | ||
| 2764140000 | Weidmüller Interface GmbH & Co. KG | - Bulk (Alt: 2764140000) RoHS : Not Compliant |
| 0 | ||
| 74764-1301 | Molex | Network Cable, Plug-Plug, 3 m L, Twinax, 74764 Series, QSFP+-to-4 SFP+ Passive Cable Assembly - Bulk (Alt: 0747641301) RoHS : Compliant |
| 0 | ||
| 39764-1008 | Molex | - Bulk (Alt: 0397641008) RoHS : Compliant | 0 | |||
| 1764100000 | Weidmüller Interface GmbH & Co. KG | - Bag (Alt: 1764100000) RoHS : Compliant |
| 0 | ||
| 76410-5807 | Molex | Connector, Backplane, 72 Contacts, 9 Rows, 8 Columns, THT, Right Angle, Gold, 25 GBPS - Trays (Alt: 0764105807) RoHS : Compliant |
| 0 | ||
| 76410-3608 | Molex | Backplane Connector, 144 Contacts, 9 Rows, Through Hole Mount, Right Angle, Impact 76410 Series - Trays (Alt: 0764103608) RoHS : Compliant |
| 0 | ||
![]() Newark | 95009-7641 | Molex | Socket, Fcc-68, 6Way, 4Contact; |Molex 95009-7641 (Alternate Part Number: 884982793798 RoHS : Compliant |
| 3,362 | |
| 44764-1001 | Molex | Connector, Rcpt, 10Pos, 2Row, 3Mm; |Molex 44764-1001 RoHS : Compliant |
| 894 | ||
| 178764-1 | TE Connectivity | Automotive Connector, R/A Header, 64Pos; |Te Connectivity Amp 178764-1 RoHS : Compliant |
| 370 | ||
| 6047.6414 | Schurter Electronic Components | Mains Power Cord Jis 8303 To Iec 320 C13; |Schurter 6047.6414 RoHS : Compliant |
| 345 | ||
| HW-06-20-T-D-764-166-LL | Samtec Inc | Conn Stack Brd, 2.54Mm, 12Pos, Hdr; |Samtec, Inc. HW-06-20-T-D-764-166-LL RoHS : Compliant |
| 311 | ||
| FMCA2764-12 | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 12", 305Mm, Rg223; |Fairview Microwave FMCA2764-12 RoHS : Not Compliant |
| 218 | ||
| FMCA2764-150CM | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 4.9 Ft, 1.5M, Rg223; |Fairview Microwave FMCA2764-150CM RoHS : Not Compliant |
| 218 | ||
| 44764-1601 | Molex | Connector, Rcpt, 16Pos, 2Row, 3Mm; |Molex 44764-1601 RoHS : Compliant |
| 76 | ||
| 76410-1107 | Molex | Conn, Backplane, R/A Header, 90Pos, 9Row; |Molex 76410-1107 RoHS : Compliant |
| 16 | ||
| 09-1A76.4152 | EAO AG | Design-In Kit 12V Keypad Ip5K4; |Eao 09-1A76.4152 RoHS : Compliant |
| 5 | ||
| FMCA1764-150CM | Fairview Microwave Inc | Rf/Coaxial Cable Assembly; |Fairview Microwave FMCA1764-150CM RoHS : Not Compliant |
| 3 | ||
| FMCA1764-100CM | Fairview Microwave Inc | Rf/Coaxial Cable Assembly; |Fairview Microwave FMCA1764-100CM RoHS : Not Compliant |
| 3 | ||
| AAN76411746 | LG Corporation | Base Assembly |Lg AAN76411746 RoHS : Not Compliant |
| 2 | ||
| 7641 | 3M Interconnect | Safety-Walk Tub & Shower Treat 7641Na, 2; |3M 7641 RoHS : Not Compliant |
| 0 | ||
| 7641 | Lumberg Automation | Gan22Lu-V21-2120200/ Black; |Lumberg Automation 7641 RoHS : Not Compliant |
| 0 | ||
![]() Analog Devices Inc | AD7641BCPZ![]() | Analog Devices Inc | 18-BIT 2MSPS INT VREF ADC.I.C RoHS : Compliant |
| 3,573 | |
| ICL7641ECPD+ | Analog Devices Inc | Single/Dual/Triple/Quad Operat RoHS : Compliant |
| 2,535 | ||
AD7641BSTZRL![]() | Analog Devices Inc | 18-BIT 2MSPS INT VREF ADC.I.C RoHS : Compliant |
| 2,000 | ||
| ICL7641BMJD/HR | Analog Devices Inc | Single/Dual/Triple/Quad Operat RoHS : Not Compliant |
| 747 | ||
| ADUM7641ARQZ-RL7 | Analog Devices Inc | 1 kV Six-Channel Digital Isola RoHS : Compliant |
| 696 | ||
| ADUM7641CRQZ-RL7 | Analog Devices Inc | 1 kV Six-Channel Digital Isola RoHS : Compliant |
| 405 | ||
| ADUM7641CRQZ | Analog Devices Inc | 1 kV Six-Channel Digital Isola RoHS : Compliant |
| 235 | ||
AD7641BSTZ![]() | Analog Devices Inc | 18-BIT 2MSPS INT VREF ADC.I.C RoHS : Compliant |
| 55 | ||
| MAX77641EVKIT# | Analog Devices Inc | MAX77641EVKIT for highly integ |
| 13 | ||
| ADP1764-1.0-EVALZ | Analog Devices Inc | 1.0V VOUT evaluation board RoHS : Compliant |
| 10 | ||
| ADUM7641ARQZ | Analog Devices Inc | 1 kV Six-Channel Digital Isola RoHS : Compliant |
| 2 | ||
| ICL7641CCPD+ | Analog Devices Inc | Single/Dual/Triple/Quad Operat RoHS : Compliant |
| 0 | ||
| MAX77641AEWV+ | Analog Devices Inc | Ultra-Low Power PMIC with high RoHS : Compliant | 0 | |||
![]() RS | 2707641 | RS Pro | BLUE M3 RING TERMINAL,1.5-2.5SQ.MM WIRE |
| 500 | |
| 7076414 | RS Pro | 10UF 250 VDC ALUMINUM ELECTROLYTIC CAPACITOR 1000H 10 (DIA.)X21MM |
| 135 | ||
| 716414 (LOCC-BOX-C2 NET 7-6414) | Amphenol Lutze | LOCC-BOX-C2 NET 7-6414, 11-30VDC, MAX.4A,100W |
| 12 | ||
| 2907641 (TMC 81D 25A) | Phoenix Contact | CIRCUIT BREAKER THERMAL-MAGNETIC 1 POLE 25A D CURVE UL489 TMC 8 SERIES |
| 9 | ||
| 117641-51R | AMETEK Inc | WINDJAMMER BLOWER, CANISTER, 240VAC, 90CFM, DIA-IN 1.75, DIA-OUT 1.75 |
| 6 | ||
| 1447641 | RS Pro | CORDSET M8 FEMALE RIGHT ANGLE 3 WIRE/3 PIN SNAP TYPE 2M PVC BLACK |
| 4 | ||
| VABB-B10-20-E-P3 (576411) | Festo | COVER PLATE, VABB-B10-20-E-P3 |
| 4 | ||
| 2576413 | RS Pro | PANEL TYPE FLOWMETER |
| 3 | ||
| EPCO-16-50-3P-ST-E (1476415) | Festo | DRIVE, ELECTRICAL, EPCO-16-50-3P-ST-E |
| 2 | ||
| 2067641 | RS Pro | M12 MALE STRAIGHT CONNECTOR TO UNTERMINATED 8 WIRE 10M CABLE BLACK PUR |
| 1 | ||
| 117641-55R | AMETEK Inc | WINDJAMMER BLOWER, CANISTER, 240VAC, 90CFM, DIA-IN 1.75, DIA-OUT 1.75 |
| 1 | ||
| FLUKE-753 (3977641) | Fluke Calibration | MULTI-FUNCTION, DOCUMENTING PROCESS CALIBRATOR, 300V, 110MA, IP-52, 750 SERIES |
| 1 | ||
| 64197 (64197 CX/500) | HELUKABEL | FIVENORM H07V2-K GREEN 1C AWG8 |
| 1 | ||
| 64187 (64187 CX/500) | HELUKABEL | FIVENORM HOOK-UP WIRE, 8 AWG, H07V2-K, PVC BLACK, UL 1063 |
| 1 | ||
| FLUKE-I2500-10 (3676410) | Fluke Calibration | PROBE I2500-10 IFLEX FLEXIBLE CURRENT PROBE |
| 1 | ||
![]() Bisco Industries | WS1276415 | WASHERS | 5,025 | |||
| MS27641-10 | New Hampshire Ball Bearings Inc | 790 | ||||
| MS27641-5 | RBC Bearings Incorporated | 587 | ||||
| MS27641-4 | RBC Bearings Incorporated | 158 | ||||
| 5676419-1 | Accurate Screw Machine | 93 | ||||
| MS35764-1302 | MS Bolts | 75 | ||||
| MS27641-4G | RBC Bearings Incorporated | 25 | ||||
| 1764-1032-AL | RAF Electronic Hardware | 17 | ||||
| 6227641-1 | HellermannTyton | 9 | ||||
| MS27641-5 | New Hampshire Ball Bearings Inc | 5 | ||||
| MS27641-4 | MS Bearings/Bushings | 4 | ||||
| MS35764-1249 | MS Bolts | 2 | ||||
| MS27641-10 | MS Bearings/Bushings | 2 | ||||
| MS27641-6 | MS Bearings/Bushings | 1 | ||||
| MS27641-8 | MS Bearings/Bushings | 1 | ||||
![]() Rochester Electronics | HUFA76419D3ST | onsemi | MOSFET N-Channel 60V 20A (Tc) TO-252-3 T/R RoHS : Compliant |
| 254 | |
| HUFA76413DK8T-F085P | onsemi | MOSFET 2 N-Channel 60V 5.1A (Tc) 8-SOIC T/R RoHS : Compliant |
| 103 | ||
| SAK-TC1764-128F80HLAA | Infineon Technologies AG | RISC FLASH Microcontroller, 32-Bit, TriCore CPU |
| 490 | ||
ISO7641FCDWR![]() | Texas Instruments | Digital Isolators General Purpose 25kV/µs 16-SOIC Tube RoHS : Compliant |
| 8 | ||
| DAC7641Y | Texas Instruments | IC DAC 1 CONV 16Bits R-2R Parallel 32-QFP RoHS : Compliant |
| 221 | ||
| HUFA76419D3ST | Fairchild Semiconductor Corporation | MOSFET N-Channel 60V 20A (Tc) TO-252-3 T/R RoHS : Compliant |
| 471 | ||
EL7641ILTZ![]() | Intersil Corporation | IC VOLT REG 5 OUT 2.99V - 18V 1.6A 32-QFN RoHS : Compliant |
| 2,291 | ||
ICL7641ECPD![]() | Intersil Corporation | Op Amp Standard 1.4MHz 14-DIP Tube RoHS : Not Compliant |
| 10,231 | ||
ICL7641BCJD![]() | Maxim Integrated Products | Op Amp Standard 1.4MHz 14-DIP Tube RoHS : Not Compliant |
| 264 | ||
ICL7641BCPD+![]() | Maxim Integrated Products | ICL7641 Quad Operational Amplifier RoHS : Compliant |
| 5,417 | ||
ICL7641BCWE![]() | Maxim Integrated Products | Op Amp Standard 1.4MHz 16-SOIC Tube RoHS : Not Compliant |
| 335 | ||
ICL7641ECPD![]() | Maxim Integrated Products | Op Amp Standard 1.4MHz 14-DIP Tube RoHS : Not Compliant |
| 4,125 | ||
ICL7641ECPD+![]() | Maxim Integrated Products | Op Amp Standard 1.4MHz 14-DIP Tube RoHS : Compliant |
| 1,656 | ||
| ICL7641ECPD-2 | Maxim Integrated Products | Op Amp Standard 1.4MHz 14-DIP RoHS : Not Compliant |
| 132 | ||
| ICL7641EMJD | Maxim Integrated Products | Op Amp Standard 1.4MHz 14-DIP RoHS : Not Compliant |
| 175 | ||
![]() Sager | 1764118 | Phoenix Contact | Pluggable Terminal Blocks 5 Pos 5.08mm pitch Through Hole Header | 0 | ||
| 0747641201 | Molex | Ethernet Cables / Networking Cables QSFP+to4SFP+CuBrkoutCble 2m 30awg 10GB RoHS : Compliant |
| 0 | ||
| 0764101627 | Molex | High Speed / Modular Connectors 3P 16COL IMPACT RAM DUAL WALL ASSY RoHS : Compliant |
| 0 | ||
| 2319764-1 | TE Connectivity | DIP Switches / SIP Switches E STACK PIANO 2P G LONG TUBE PD ON RoHS : Compliant |
| 0 | ||
| 4-2176764-1 | TE Connectivity | RT 2A 0.25W 3K01 0.1% 25PPM 5K RL RoHS : Unknown |
| 0 | ||
| 776417-1 | TE Connectivity | Automotive Connectors AS 16, 8P CAP TPA, KEY 1, RED |
| 0 | ||
| CA1-X0-10-764-111-C | Carling Technologies | Circuit Breakers | 0 | |||
| 43764-1866 | ARATAS Americas | DIP Switches / SIP Switches TKC-1866 | 0 | |||
| 6-1803764-1 | TE Connectivity | TE Connectivity ANVIL, COMBINATION |
| 0 | ||
| 796764-1 | TE Connectivity | Standard Circular Connector CPC RCPT ASSY POSTED 11-4 RoHS : Compliant |
| 0 | ||
| 1607641 | Phoenix Contact | Circular Metric Connectors ST-17S1N8A8003 RoHS : Compliant | 0 | |||
| 0447641601 | Molex | Headers & Wire Housings Micro-Fit (3.0) BMI RA Hdr/Fem Tin 16Ckt RoHS : Compliant |
| 0 | ||
| 122764-1 | TE Connectivity | Bench Top Tools INSERT | 0 | |||
| 0764101137 | Molex | High Speed / Modular Connectors Impact RAM 3x10 Right End Wall Sn RoHS : Compliant |
| 0 | ||
| 2359764-1 | TE Connectivity | Bench Top Tools HV DIE SET ASSEMBLY | 0 | |||
![]() Ameya Holding Limited | ISO7641FMDWR![]() | Texas Instruments | RoHS : Compliant | 2,000 | ||
![]() ComSIT USA | 744764122 | Wurth Electronics Midcom | AVAILABLE EU | 7,076 | ||
![]() ComSIT USA | 1AJ067641D | ksd | QUARZ 6,76438 MHz SMD49 RoHS : Not Compliant | 2,000 | ||
| HUF76419S3STR4908 | onsemi | Electronic Component RoHS : Compliant | 1,117 | |||
| HUF76419D3S | Intersil Corporation | 20A, 60V, 0.043 OHM, N-CHANNEL, LOGIC LEVEL ULTRAFET POWER MOSFET Power Field-Effect Transistor, 20A I(D), 60V, 0.043ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-252AA RoHS : Not Compliant | 750 | |||
MSP430F67641AIPZR![]() | Texas Instruments | POLYPHASE METERING SOC Microprocessor Circuit, CMOS, PQFP100 RoHS : Compliant | 325 | |||
| MSC7641134T4SDG6 | Microwave Semiconductor | Electronic Component RoHS : Not Compliant | 166 | |||
| ADUM7641CRQZ | Analog Devices Inc | 1 KV RMS SIX-CHANNEL DIGITAL ISOLATORS Interface Circuit, PDSO20 RoHS : Compliant | 102 | |||
AD7641BCPZ![]() | Analog Devices Inc | 18-BIT, 2 MSPS SAR ADC ADC, Successive Approximation, 18-Bit, 1 Func, 1 Channel, Serial, Parallel, Word Access, CMOS RoHS : Compliant | 98 | |||
ICL7641CCWE![]() | Maxim Integrated Products | QUAD OPERATIONAL AMPLIFIER Operational Amplifier, 4 Func, 12000uV Offset-Max, CMOS, PDSO16 RoHS : Not Compliant | 80 | |||
| AZ7641A24DE | ZETTLER Magnetics Inc | 20 AMP MINIATURE POWER SUPPLY Power/Signal Relay RoHS : Compliant | 49 | |||
| ICL7641ECPD | RCA | QUAD, LOW POWER CMOS OPERATIONAL AMPLIFIER Operational Amplifier, 4 Func, 25000uV Offset-Max, CMOS, PDIP14 RoHS : Not Compliant | 3 | |||
![]() Interstate Connecting Components | RP7641G55 | MISC MIL-AERO | UNCODED | 9 | ||
| 1-2176412-8 | TE Connectivity | 5W XSM M/OX 5% 27R RoHS : Compliant |
| 0 | ||
| 1676410-2 | TE Connectivity | RN 0805 698R 0.1% 10PPM 1KRL RoHS : Compliant |
| 0 | ||
| 1676419-3 | TE Connectivity | RN 0805 6K98 0.1% 10PPM 5 RoHS : Compliant |
| 0 | ||
| 2176414-4 | TE Connectivity | 7W STD M/OX 5% 27R RoHS : Compliant |
| 0 | ||
| 3-2176414-8 | TE Connectivity | 7W STD M/OX 5% 680R RoHS : Compliant |
| 0 | ||
| 2319764-1 | TE Connectivity | E STACK PIANO 2P G LONG TUBE P RoHS : Compliant |
| 0 | ||
| 5-2176412-2 | TE Connectivity | 5W XSM M/OX 5% 680R RoHS : Unknown |
| 0 | ||
| 5-2176416-8 | TE Connectivity | 9W STD M/OX 5% 12K RoHS : Compliant |
| 0 | ||
| 7-2176414-0 | TE Connectivity | 7W STD M/OX 5% 15K RoHS : Compliant |
| 0 | ||
| 4-2176415-8 | TE Connectivity | 8W STD M/OX 5% 2K7 RoHS : Compliant |
| 0 | ||
| 4-2176764-1 | TE Connectivity | RT 2A 0.25W 3K01 0.1% 25PPM 5K RoHS : Unknown | 0 | |||
| 776417-1 | TE Connectivity | AS 16, 8P CAP TPA, KEY 1, RED |
| 0 | ||
| 7-2176416-2 | TE Connectivity | 9W STD M/OX 5% 47K RoHS : Compliant |
| 0 | ||
| 6-1803764-1 | TE Connectivity | ANVIL, COMBINATION |
| 0 | ||
![]() NexGen Digital | SKY77641-21 | Skyworks Solutions Inc | RoHS : Compliant | 3,442 | ||
![]() Powell Electronics | 1-2176411-6 | TE Connectivity | Resistors RoHS : Compliant |
| 6,600 | |
| 1-2176416-1 | TE Connectivity | Resistors RoHS : Compliant |
| 912 | ||
| 2176416-1 | TE Connectivity | Resistors RoHS : Compliant |
| 910 | ||
| 7-2176416-1 | TE Connectivity | Resistors RoHS : Compliant |
| 828 | ||
| 7-2176416-4 | TE Connectivity | Resistors RoHS : Compliant |
| 725 | ||
| 5-2176416-6 | TE Connectivity | Resistors RoHS : Compliant |
| 435 | ||
| 7-2176416-2 | TE Connectivity | Resistors RoHS : Compliant |
| 389 | ||
| 2319764-1 | TE Connectivity | Switches RoHS : Compliant |
| 131 | ||
| 5-2176416-8 | TE Connectivity | Resistors RoHS : Compliant |
| 102 | ||
| RP7641G340 | CII Guardian | MIL/AERO RELAY RP7641G340 |
| 31 | ||
| RP7641G332 | CII Guardian | MIL/AERO RELAY RP7641G332 |
| 13 | ||
| 87-443764-19S | Amphenol Corporation | RECEPT |
| 2 | ||
| 88-443764-19Y | Amphenol Corporation | RECEPT |
| 2 | ||
| 88-443764-15S | Amphenol Corporation | RECEPT |
| 2 | ||
| 88-443764-18Z | Amphenol Corporation | RECEPT |
| 2 | ||
![]() Chip 1 Exchange | B37641-K7475-K62 | INSTOCK | 60,000 | |||
| B37641K7475K62V1 | TDK Electronics | INSTOCK | 21,000 | |||
| B37641K7475K62 | INSTOCK | 2,500 | ||||
| B37641K7475K-62-V1 | INSTOCK | 2,500 | ||||
| 447641402- | Molex | INSTOCK | 834 | |||
| 744764122- | Wurth Elektronik | INSTOCK | 688 | |||
| CXT6176 / 4144-002 | MtronPTI | INSTOCK | 480 | |||
| HMI7641-2 | INSTOCK | 451 | ||||
| ICL7641EMJD | Intersil Corporation | INSTOCK RoHS : Not Compliant | 250 | |||
| MDSTBV 2,5/ 3-G-5,08 GY / 1764125 | Phoenix Contact | INSTOCK | 38 | |||
| MDSTBV 2,5/ 2-G-5,08 GY /1764138 | Phoenix Contact | INSTOCK | 36 | |||
![]() Avnet Abacus | PAD002-T764113S | Bourns Inc | - Tape and Reel (Alt: PAD002-T764113S) RoHS : Compliant | 8,800 | ||
| 2764179 | Phoenix Contact | EG 45AABS GN EG45AABSGN (Alt: 2764179) RoHS : Compliant | 60 | |||
| 2764140 | Phoenix Contact | (Alt: 2764140) RoHS : Compliant | 30 | |||
| 796764-1 | TE Connectivity | (Alt: 796764-1) RoHS : Compliant | 0 | |||
| 2319764-1 | TE Connectivity | (Alt: 2319764-1) RoHS : Compliant | 0 | |||
| 764103607 | Molex | IMPACT RAM 3X16 GL SN (Alt: 764103607) RoHS : Compliant | 0 | |||
| 2176417-8 | TE Connectivity | SMD Current Sense Resistor 100 Milliohm 1 2 W 2512 6432 Metric Metal Foil (Alt: 2176417-8) RoHS : Compliant | 0 | |||
| 747641401 | Molex | (Alt: 747641401) RoHS : Compliant | 0 | |||
| 764101827 | Molex | (Alt: 764101827) RoHS : Compliant | 0 | |||
| 447641002 | Molex | Conn Wire to Board RCP 10 POS 3mm Solder RA ThruHole Tray (Alt: 447641002) RoHS : Compliant | 0 | |||
| 447641002 | Molex | Conn Wire to Board RCP 10 POS 3mm Solder RA ThruHole Tray (Alt: 447641002) RoHS : Compliant | 0 | |||
| 764101127 | Molex | Conn Backplane HDR 90 POS 19mm Press Fit RA ThruHole Tray (Alt: 764101127) RoHS : Compliant | 0 | |||
| 76412-002 | Amphenol Corporation | 1 BAG SCREWS OF 100 PCS (Alt: 76412-002) RoHS : Not Compliant | 0 | |||
| 747641201 | Molex | (Alt: 747641201) RoHS : Compliant | 0 | |||
| B88069X7641T702 | TDK Corporation | (Alt: B88069X7641T702) RoHS : Not Compliant | 0 | |||
![]() Avnet Asia | 0764107618 | Molex | (Alt: 0764107618) RoHS : Compliant | 0 | ||
| SLG7NT47641V | Renesas Electronics Corporation | (Alt: SLG7NT47641V) RoHS : Compliant | 0 | |||
| 10131764-101LF | Amphenol Corporation | Conn Backplane RCP 200 POS Signal 1.2mm Signal Press Fit RA Thru-Hole (Alt: 10131764-101LF) RoHS : Compliant | 0 | |||
| 2-2213764-1 | TE Connectivity | (Alt: 2-2213764-1) RoHS : Compliant | 0 | |||
| 9-2176412-2 | TE Connectivity | B43541A9277M67 (Alt: 9-2176412-2) RoHS : Compliant | 0 | |||
| 0447641602 | Molex | PCB Receptacle, 16 Contacts, 2 Rows, 3mm, Gold, 8.5A, THT, Right Angle, Phosphor Bronze, THT RA (Alt: 0447641602) RoHS : Compliant | 0 | |||
| 1-2176412-0 | TE Connectivity | Resistor, 12 Ohm, ? 5%, 5 W, Axial Leaded, Metal Oxide, Power Flame Proof (Alt: 1-2176412-0) RoHS : Compliant | 0 | |||
| 4-2176412-8 | TE Connectivity | METAL OXIDE RESISTORS 5W XSM M/OX 5 470R (Alt: 4-2176412-8) RoHS : Compliant | 0 | |||
| 0447641202 | Molex | PCB Receptacle, 12 Contacts, 2 Rows, 3mm, Gold, 8.5A, THT, Right Angle, Phosphor Bronze, Solder, LCP (Alt: 0447641202) RoHS : Compliant | 0 | |||
| 0447641403 | Molex | PCB Receptacle, 14 Contacts, 2 Rows, 3mm, Gold, 8.5A, Female Receptacle, THT, Right Angle, Solder (Alt: 0447641403) RoHS : Compliant | 0 | |||
| 1-2176412-6 | TE Connectivity | Resistor Power Metal Oxide Film 22Ohm 5% 5W 2-Pin Through Hole Ammo Pack (Alt: 1-2176412-6) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | B37641C8106K062 | TDK Corporation | IN STOCK SHIP TODAY |
| 464 | |
| 764-1-R15K | TT electronics / BI Technologies | IN STOCK SHIP TODAY | 463 | |||
| 764-1-R270 | TT electronics / BI Technologies | IN STOCK SHIP TODAY | 389 | |||
| ICL7641ECPD | Harris Semiconductor | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 125 | ||
| N74F1764-1A | Philips Semiconductors | IN STOCK SHIP TODAY RoHS : Not Compliant | 52 | |||
| MSM3764-15RS | OKI Electric Industry Co Ltd | IN STOCK SHIP TODAY | 33 | |||
| 764-1-R1.5K | TT electronics / BI Technologies | IN STOCK SHIP TODAY | 30 | |||
ICL7641ECPD![]() | Intersil Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 28 | ||
| 2001-7641-02 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 10 | ||
| CBD21WA4M37S0T40-764.14 | Amphenol Positronic | IN STOCK SHIP TODAY | 3 | |||
| MS27641-6 | FAFNIR | IN STOCK SHIP TODAY |
| 2 | ||
![]() DB Roberts | 1337641 | Essentra Components | 0 | |||
| 20597641 | Essentra Components | M8X1 METRIC THRD PLUG FLAT WAS | 0 | |||
![]() Master Electronics | 1-2176412-8 | TE Connectivity | 5W XSM M/OX 5% 27R RoHS : Compliant |
| 4,000 | |
| 8-2176412-7 | TE Connectivity | 5W XSM M/OX 5% 20K RoHS : Compliant |
| 3,000 | ||
| 1676410-2 | TE Connectivity | RN 0805 698R 0.1% 10PPM 1KRL RoHS : Compliant |
| 0 | ||
| 1676419-3 | TE Connectivity | RN 0805 6K98 0.1% 10PPM 5KRL MOQ Reduction RoHS : Compliant |
| 0 | ||
| 2176414-4 | TE Connectivity | 7W STD M/OX 5% 27R MOQ Reduction RoHS : Compliant |
| 0 | ||
| 3-2176414-8 | TE Connectivity | 7W STD M/OX 5% 680R MOQ Reduction RoHS : Compliant |
| 0 | ||
| 5-2176412-2 | TE Connectivity | 5W XSM M/OX 5% 680R RoHS : Compliant |
| 0 | ||
| 7-2176414-0 | TE Connectivity | 7W STD M/OX 5% 15K RoHS : Compliant |
| 0 | ||
| 4-2176415-8 | TE Connectivity | 8W STD M/OX 5% 2K7 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 4-2176764-1 | TE Connectivity | MOQ Reduction RoHS : Compliant |
| 0 | ||
| F7641D | TE Connectivity | Power Entry Module EMI/RFI Filtered M 3 POS 250VAC 1A Fuse ST 1 Port MOQ Reduction RoHS : Compliant |
| 0 | ||
| 776417-1 | TE Connectivity | AS 16 8P CAP TPA KEY 1 RED MOQ Reduction RoHS : Compliant |
| 0 | ||
| 6-1803764-1 | TE Connectivity | ANVIL COMBINATION RoHS : Compliant |
| 0 | ||
| 6-2176415-4 | TE Connectivity | 8W STD M/OX 5% 12K MOQ Reduction RoHS : Compliant |
| 0 | ||
| 8-2176412-5 | TE Connectivity | 5W XSM M/OX 5% 16K MOQ Reduction RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 6047.6414 | Schurter Electronic Components | AC Power Cords 6010 CORDSETS 7A 70 RoHS : Compliant |
| 50 | |
| 2907641 | Phoenix Contact | Circuit Breakers TMC 81D 25A RoHS : Compliant |
| 50 | ||
| 1764176 | Phoenix Contact | Pluggable Terminal Blocks MCVW 1 5/ 8-ST-3 81 BDNZ:004 |
| 49 | ||
1407641![]() | Phoenix Contact | Heavy Duty Power Connectors HC-EVO-B10-CHWD- PLRBK RoHS : Compliant |
| 32 | ||
| 117641-55R | AMETEK Inc | Blower, canister, 240VAC, 90CFM, dia-in 1.75, dia-out 1.75 |
| 1 | ||
| 27641 | Ortronics C2G | C2G Value Series Audio Cable |
| 0 | ||
| 2764153 | Phoenix Contact | Enclosures, Boxes, & Cases EG 45-GP/ABS GN RoHS : Compliant |
| 0 | ||
| CP060-357641 | Same Sky | Thermoelectric Peltier Modules peltier, 35 x 76 x 4.1 mm, 6 A, wire leads, arcTEC RoHS : Compliant |
| 0 | ||
| 5017-641 | Axis | Axis T91A64 Corner Bracket |
| 0 | ||
| 2764130000 | Weidmüller Interface GmbH & Co. KG | Industrial Surge Protectors VPUM2I2SXFXV2O1TXPX10 RoHS : Compliant |
| 0 | ||
| 5507-641 | Axis | T91H61 Dome Camera Wall Mount, Indoor/Outdoor, 66 Lb Load |
| 0 | ||
| 1197641 | Phoenix Contact | Circular Metric Connectors SACB-C-H180- 6/3-M8 HD RoHS : Compliant |
| 0 | ||
| 21033176410 | HARTING Technology Group | M12A-code4pinfemalepanelfeedthroughto1.0mAWG24flyingleads,frontmount,PVC RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE34764-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to SMB Plug Cable 12 Inch Length Using PE-SR405FL Coax., Radio frequency assembly SMA male to SMB plug cable 12 inch length using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMB plug cable 12 inch length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMB cable connection on the other. Our SMA to SMB cable assemblies have a male gender on end 1 and plug on end 2. This SMA to SMB cable is a male to plug coax assembly, PE34764-12, can also be known as a SMA plug to SMB male cable assembly and will be shipped same-day as it is purchased. SMA plug to SMB male cable assembly PE34764-12 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMB cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMB plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34764-12 can also be used in the other direction and will be SMB plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMB plug cable 12 inch length using PE-SR405FL coax. |
| 413 | |
| PE3C9764-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 10KV, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 10KV, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel Over Copper, RF Cable Part Number: RG303HV, RF Cable Type: RG303HV, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 10KV Male to 10KV Female Bulkhead Cable 12 Inch Length Using RG303HV Coax., Radio frequency assembly 10KV male to 10KV female bulkhead cable 12 inch length using RG303HV coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 10KV male to 10KV female bulkhead cable 12 inch length using RG303HV coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 10KV to 10KV cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 10KV cable connection on one end and 10KV bulkhead cable connection on the other. Our 10KV to 10KV cable assembly has male gender on end 1 and female on end 2. PE3C9764-12 can also be known as a 10KV plug to 10KV jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has silver as cable inner conducting material and FEP dielectric type. We design our 10KV high voltage cable assemblies for applications, such as semiconductor fab and test and measurement. This cable assembly features materials that can withstand higher voltages, ensuring safety and preventing electrical breakdown. Pasternack designs 10KV high voltage RF cable assemblies to handle higher voltages and minimize the risk of electric shock. The connectors used in this cable assembly have voltage rating of 10kV and recessed contacts for additional safety. These cable assemblies are suitable for high voltage power supplies, amplifiers, nuclear instrumentation and test and measurement equipment where high voltage transmission and RF signal integrity are critical. This cable assembly employs durable and flexible materials, and with a 0.788 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. 10KV plug to 10KV jack cable assembly PE3C9764-12 is built with RG303HV which is a coax type. The Pasternack 10KV cable assembly is manufactured with 10KV to 10KV cable connectors, has a 50 Ohm impedance and is single shielded. This red RF cable assembly features 10,000 Vdc max DC voltage and has an FEP jacket with 0.169 inches diameter. Both the connectors have a crimp/solder attachment method and a brass body with nickel over copper plating. RF specs on this 10KV male to 10KV female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9764-12 can also be used in the other direction and will be 10KV female bulkhead to 10KV male cable assembly if the opposite connectivity is required. 10KV plug to 10KV jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 10KV to 10KV cable assembly for quick shipment worldwide. Variations of 10KV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 10KV male to 10KV female bulkhead cable 12 inch length using RG303HV coax. |
| 3 | ||
| PE3C10764-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 1.85mm Male to 2.4mm Female Cable 12 Inch Length Using PE-SR405FLJ Coax., Pasternack’s PE3C10764-12 1.85mm male to 2.4mm female RF cable assembly using PE-SR405FLJ coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 2.4mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 2.4mm cable connection on the other. Our 1.85mm to 2.4mm cable assembly has a male gender on end 1 and a female on end 2. PE3C10764-12 can also be known as a 1.85mm plug to 2.4mm jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10764-12 RF cable has an FEP jacket of 0.105-inch diameter. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. This PE3C10764-12 1.85mm plug to 2.4mm jack cable assembly is built with PE-SR405FLJ, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the clamp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 12-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10764-12 can also be used in the other direction and will be a 2.4mm female to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to 2.4mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 1.85mm and 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 2.4mm RF cable assembly as per your requirements. |
| 2 | ||
| PE3C10764-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 1.85mm Male to 2.4mm Female Cable 18 Inch Length Using PE-SR405FLJ Coax., Pasternack’s PE3C10764-18 1.85mm male to 2.4mm female RF cable assembly using PE-SR405FLJ coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 2.4mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 2.4mm cable connection on the other. Our 1.85mm to 2.4mm cable assembly has a male gender on end 1 and a female on end 2. PE3C10764-18 can also be known as a 1.85mm plug to 2.4mm jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10764-18 RF cable has an FEP jacket of 0.105-inch diameter. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. This PE3C10764-18 1.85mm plug to 2.4mm jack cable assembly is built with PE-SR405FLJ, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the clamp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10764-18 can also be used in the other direction and will be a 2.4mm female to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to 2.4mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 1.85mm and 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 2.4mm RF cable assembly as per your requirements. |
| 2 | ||
| PE3C7641 | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3C7641/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. Snap-On QMA Male to SMA Male Cable Using LMR-200 Coax with HeatShrink. PE3C7641/HS is a QMA male to SMA male cable using LMR-200 coax. This Pasternack QMA male to SMA male cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm SMA for connector 2. Our male QMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C7641/HS QMA male to SMA male cable assembly is constructed with LMR-200 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W17641/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. Mini SMP Female Right Angle to SMB Plug Cable Using PE-SR405AL Coax with HeatShrink. PE3W17641/HS is a Mini SMP female right angle to SMB plug cable using PE-SR405AL coax. This Pasternack Mini SMP female right angle to SMB plug cable assembly uses a 50 Ohm Mini SMP for connector 1 and a 50 Ohm SMB for connector 2. Mini SMP right angle to SMB coaxial cable assembly uses 90 degree right angle coax cable connector. Our female Mini SMP right angle to plug SMB cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W17641/HS Mini SMP female right angle to SMB plug cable assembly is constructed with PE-SR405AL coax. | 0 | |||
| PE3C7641LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. Snap-On QMA Male to SMA Male Cable Using LMR-200 Coax with HeatShrink, LF Solder. PE3C7641LF/HS is a QMA male to SMA male cable using LMR-200 coax. This Pasternack QMA male to SMA male cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm SMA for connector 2. Our male QMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C7641LF/HS QMA male to SMA male cable assembly is constructed with LMR-200 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W07641 | Pasternack Enterprises | Key Specifications, Connector Series 1: C, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. C Male Right Angle to 7/16 DIN Female Cable Using RG393 Coax. PE3W07641 is a C male right angle to 7/16 DIN female cable using RG393 coax. This Pasternack C male right angle to 7/16 DIN female cable assembly uses a 50 Ohm C for connector 1 and a 50 Ohm 7/16 DIN for connector 2. C right angle to 7/16 DIN coaxial cable assembly uses 90 degree right angle coax cable connector. Our male C right angle to female 7/16 DIN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07641 C male right angle to 7/16 DIN female cable assembly is constructed with RG393 coax. | 0 | |||
| PE33764-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. MCX Plug Right Angle to BNC Female Bulkhead Cable 12 Inch Length Using RG316 Coax., Radio frequency assembly MCX plug right angle to BNC female bulkhead cable 12 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MCX plug right angle to BNC female bulkhead cable 12 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle MCX cable connection on one end and BNC bulkhead cable connection on the other. Our right angle MCX to BNC cable assembly has plug gender on end 1 and female on end 2. PE33764-12 can also be known as a right angle MCX male to BNC jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. MCX male to BNC jack cable assembly PE33764-12 is built with RG316 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with right angle MCX to BNC cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE33764-12 RF cable are available on our downloadable PDF datasheet.PE33764-12 can also be used in the other direction and will be BNC female bulkhead to right angle MCX plug cable assembly if the opposite connectivity is required. MCX right angle male to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to BNC cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX RF cable assembly as per your requirements. |
| 0 | ||
| PE3764-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401AL-STRAIGHT, RF Cable Type: PE-SR401AL-STRAIGHT, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Female Bulkhead to SMA Female Bulkhead Cable 12 Inch Length Using PE-SR401AL Coax., Radio frequency assembly SMA female bulkhead to SMA female bulkhead cable 12 inch length using PE-SR401AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to SMA female bulkhead cable 12 inch length using PE-SR401AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and SMA bulkhead cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE3764-12, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE3764-12 is built with PE-SR401AL-STRAIGHT which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female bulkhead to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack bulkhead to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to SMA female bulkhead cable 12 inch length using PE-SR401AL coax. |
| 0 | ||
| PE3764-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401AL-STRAIGHT, RF Cable Type: PE-SR401AL-STRAIGHT, RF Cable Impedance: 50 Ohm, Length: 18 inches. SMA Female Bulkhead to SMA Female Bulkhead Cable 18 Inch Length Using PE-SR401AL Coax., Radio frequency assembly SMA female bulkhead to SMA female bulkhead cable 18 inch length using PE-SR401AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to SMA female bulkhead cable 18 inch length using PE-SR401AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and SMA bulkhead cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE3764-18, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE3764-18 is built with PE-SR401AL-STRAIGHT which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female bulkhead to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack bulkhead to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to SMA female bulkhead cable 18 inch length using PE-SR401AL coax. |
| 0 | ||
| PE3C7764-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Black FAKRA Plug to FAKRA Jack Cable 12 Inch Length Using RG316 Coax., Radio frequency assembly black FAKRA plug to FAKRA jack cable 12 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Black FAKRA plug to FAKRA jack cable 12 inch length using RG316 coax, FAKRA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FAKRA cable connection on one end and FAKRA cable connection on the other. Our FAKRA to FAKRA cable assemblies have a plug gender on end 1 and jack on end 2. PE3C7764-12 can also be known as a FAKRA male to FAKRA female cable assembly and will be shipped same-day as it is purchased. FAKRA male to FAKRA female cable assembly PE3C7764-12 is built with RG316 which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to FAKRA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency FAKRA plug to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7764-12 can also be used in the other direction and will be FAKRA jack to FAKRA plug cable assembly if the opposite connectivity is required. FAKRA male to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to FAKRA cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this black FAKRA plug to FAKRA jack cable 12 inch length using RG316 coax. |
| 0 | ||
| PE3FCA764-10M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: APC, Jacket Burn Rating: OFNR, Cable Diameter: 2 mm, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Duplex LC UPC to LC APC Uniboot, SM OS2, 2.0mm Riser, Yellow-10M. Pasternack’s PE3FCA764-10M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long duplex patch cable assembly features 9/125 µm fiber and is equipped with LC/UPC uniboot to LC/APC uniboot connectors. Our yellow fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as data center structured cabling, telecommunications networks, enterprise fiber optic networks, fiber optic backbone connections, server room and equipment rack interconnects and high-speed ethernet and fiber channel systems. With the flexibility of custom lengths, the PE3FCA764-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord can be found on its downloadable PDF datasheet. This PE3FCA764-10M fiber optic cable with a 2 mm cable diameter and 15 mm bend radius offers flexible installation options.This fiber optic cable assembly features a minimum return loss of 55 dB and a maximum insertion loss of 0.3 dB. Pasternack has one of the largest in-stock selections of dual LC/UPC to dual LC/APC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3FCA764-1M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: APC, Jacket Burn Rating: OFNR, Cable Diameter: 2 mm, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Duplex LC UPC to LC APC Uniboot, SM OS2, 2.0mm Riser, Yellow-1M. Pasternack’s PE3FCA764-1M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 1-meter long duplex patch cable assembly features 9/125 µm fiber and is equipped with LC/UPC uniboot to LC/APC uniboot connectors. Our yellow fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as data center structured cabling, telecommunications networks, enterprise fiber optic networks, fiber optic backbone connections, server room and equipment rack interconnects and high-speed ethernet and fiber channel systems. With the flexibility of custom lengths, the PE3FCA764-1M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord can be found on its downloadable PDF datasheet. This PE3FCA764-1M fiber optic cable with a 2 mm cable diameter and 15 mm bend radius offers flexible installation options.This fiber optic cable assembly features a minimum return loss of 55 dB and a maximum insertion loss of 0.3 dB. Pasternack has one of the largest in-stock selections of dual LC/UPC to dual LC/APC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 0 | ||
![]() Vyrian | MAX77641EVKIT | Analog Devices (Maxim Integrated) | 11,684 | |||
| MAX77641AEWV | Analog Devices (Maxim Integrated) | 11,246 | ||||
MSP430F67641AIPZ![]() | Texas Instruments | Microprocessor Circuit, CMOS, PQFP100 RoHS : Compliant | 9,615 | |||
| TMS4764-15NL | Texas Instruments | MASK ROM, 8KX8, 150ns, NMOS, PDIP24 RoHS : Not Compliant | 9,428 | |||
| MSP430F67641APZ | Texas Instruments | Microprocessor Circuit, CMOS, PQFP100 | 7,903 | |||
TMS2764-17JL![]() | Texas Instruments | UVPROM, 8KX8, 170ns, NMOS, CDIP28 RoHS : Not Compliant | 7,849 | |||
| MAX77641AEWV+T | Analog Devices Inc | Power Supply Support Circuit RoHS : Compliant | 7,511 | |||
MSP430F67641AIPNR![]() | Texas Instruments | Microprocessor Circuit, CMOS, PQFP80 RoHS : Compliant | 6,415 | |||
| MAX77641EWV+ | Analog Devices Inc | Power Supply Support Circuit RoHS : Compliant | 6,300 | |||
TMS276417JP4![]() | Texas Instruments | UVPROM, 8KX8, 170ns, NMOS, CDIP28 RoHS : Not Compliant | 5,597 | |||
MSP430F67641IPN![]() | Texas Instruments | Microprocessor Circuit, CMOS, PQFP80 RoHS : Compliant | 5,178 | |||
| TIDM-THREEPHASEMETER-F67641 | Texas Instruments | 4,596 | ||||
MSP430F67641AIPZR![]() | Texas Instruments | Microprocessor Circuit, CMOS, PQFP100 RoHS : Compliant | 4,257 | |||
| MSP430F67641APN | Texas Instruments | Microprocessor Circuit, CMOS, PQFP80 | 3,470 | |||
MSP430F67641AIPN![]() | Texas Instruments | Microprocessor Circuit, CMOS, PQFP80 RoHS : Compliant | 3,400 | |||
![]() Win Source Electronics | SKY77764-11 | Skyworks Solutions Inc | IC AMP CDMA 1.71-1.785GHZ 10MCM RoHS : Compliant |
| 70,000 | |
| ADUM7641CRQ | Analog Devices Inc | 6-Channel Digital Isolator 20-QSOP |
| 20,645 | ||
ISO7641FMDW![]() | Texas Instruments | Low Power Quad Channels Digital Isolators | DGTL ISO 4.243KV GEN PURP 16SOIC RoHS : Compliant |
| 20,000 | ||
ISO7641FCDW![]() | Texas Instruments | Low Power Triple and Quad Channels Digital Isolators RoHS : Compliant |
| 8,328 | ||
ISO7641FCDWR![]() | Texas Instruments | DGTL ISO 2.5KV GEN PURP 16SOIC RoHS : Compliant |
| 7,910 | ||
ISO7641FMDWR![]() | Texas Instruments | Low Power Quad Channels Digital Isolators RoHS : Compliant |
| 6,000 | ||
| ADUM7641CRQZ-RL7 | Analog Devices Inc | 1 kV RMS Six-Channel Digital Isolators | DGTL ISO 1KV 6CH GEN PURP 20QSOP RoHS : Compliant |
| 5,000 | ||
| ADUM7641CRQZ | Analog Devices Inc | 1 kV RMS Six-Channel Digital Isolators | DGTL ISO 1KV 6CH GEN PURP 20QSOP RoHS : Compliant |
| 5,000 | ||
| ADUM7641ARQZ | Analog Devices Inc | DGTL ISO 1000VRMS 6CH GP 20QSOP RoHS : Compliant |
| 4,560 | ||
| ADUM7641ARQZ-RL7 | Analog Devices Inc | DGTL ISO 1000VRMS 6CH GP 20QSOP / General Purpose Digital Isolator 1000Vrms 6 Channel 1Mbps 15kV/µs CMTI 20-SSOP (0.154", 3.90mm Width) RoHS : Compliant |
| 4,140 | ||
| AD7641BST | Analog Devices Inc | 18-Bit ADC 1-Channel 2MSPS 48-LQFP |
| 200 | ||
AD7641BSTZ![]() | Analog Devices Inc | IC ADC 18BIT 2MSPS SAR 48-LQFP RoHS : Compliant |
| 141 | ||
AD7641BSTZRL![]() | Analog Devices Inc | IC ADC 18BIT SAR 48LQFP / 18 Bit Analog to Digital Converter 1 Input 1 SAR 48-LQFP (7x7) RoHS : Compliant |
| 130 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |