Motor de Búsqueda de Datasheet de Componentes Electrónicos
  Spanish  ▼
ALLDATASHEET.ES

X  



752L-P14-R Reseller

ResellerNo. de piezaFabricante ElectrónicoDescripción ElectrónicosPriceQty.
BuyNow

PUI
12.88752

16,680
12.87522

2,415
2012-2X05G00S-2.8-7.5-21.

2,000
12.94752

2,000
12.87529

960
175-203-JBW

RCD Components Inc
RoHS : Compliant
350
12.87524

205
12.97526

10
12.97528

10
12.85752

10

Pasternack Enterprises US
PE3W06975-24

Pasternack Enterprises Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. TNC Male to TNC Male Cable 24 Inch Length Using PE-SR402AL Coax., Radio frequency assembly TNC male to TNC male cable 24 inch length using PE-SR402AL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to TNC male cable 24 inch length using PE-SR402AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W06975-24 can also be known as a TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3W06975-24 is built with PE-SR402AL which is a semi-rigid coax type. The Pasternack semi-rigid TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 20 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male cable 24 inch length using PE-SR402AL coax.
1 : $136.99
25 : $130.14
50 : $123.29
100 : $117.81
121
PEWAN075-20ELNF

Pasternack Enterprises Key Specifications, Waveguide Size: WR-75, Gain Min: 20, Beam Width, 3dB V: 17.3, Beam Width, 3dB H: 17.5, Frequency, Min: 10 GHz, Frequency, Max: 15 GHz. WR-75 Standard Gain Horn with 20 dBi gain, End Launch N Female connector. The PEWAN075-20ELNF standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-75 input and a waveguide to coaxial transition adapter. Our WR-75 waveguide antenna features a type N female connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-75 standard gain horn antenna with a type N female input has a minimum frequency of 10 GHz and a maximum frequency of 15 GHz. Pasternack’s PEWAN075-20ELNF waveguide horn antenna has a typical gain of 20 dBi. Our waveguide antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.5 degrees at 3 dB. This antenna has a length of 8.68 inches, a width of 3.67 inches, and a weight of 0.52 lbs. This WR-75 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a type N female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.
1 : $1,870.0
5 : $1,795.2
10 : $1,720.4
25 : $1,645.6
43
PE7520-3

Pasternack Enterprises Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 3 dB, Attenuation Accuracy, Typ: 0.5 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 2 Watts, Body Material: Brass, Connector-In Series: QMA, Connector-In Gender: Male, Connector-Out Series: QMA, Connector-Out Gender: Female. 3 dB Fixed Attenuator, QMA Male to QMA Female Brass Tri-Metal Body Rated to 2 Watts Up to 6 GHz. PE7520-3 is a fixed 3 dB attenuator from Pasternack. This 3 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. Pasternack’s PE7520-3 fixed attenuator is available with a typical attenuation accuracy of 0.5 dB. The max input power rating (CW) of this RF attenuator is 2 Watts. Our fixed radio frequency attenuator with QMA connectors is constructed with brass body material and tri-metal plating. The connectorized bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 3 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This QMA attenuator has a male gender on side 1 and a QMA female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 3 dB. The Pasternack PE7520-3 attenuator is rated for up to 6 GHz. This coaxial attenuator is also suitable for instrumentation, precision measurements, prototyping and characterization, production systems, 5G cellular bands and DAS systems applications. The 3 dB attenuator has a brass connector built with tri-metal plating. Our fixed RF attenuator PE7520-3 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 3 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.
1 : $68.49
25 : $65.75
50 : $63.7
100 : $62.33
30
PE7520-2

Pasternack Enterprises Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 2 dB, Attenuation Accuracy, Typ: 0.5 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 2 Watts, Body Material: Brass, Connector-In Series: QMA, Connector-In Gender: Male, Connector-Out Series: QMA, Connector-Out Gender: Female. 2 dB Fixed Attenuator, QMA Male to QMA Female Brass Tri-Metal Body Rated to 2 Watts Up to 6 GHz. PE7520-2 is a fixed 2 dB attenuator from Pasternack. This 2 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. Pasternack’s PE7520-2 fixed attenuator is available with a typical attenuation accuracy of 0.5 dB. The max input power rating (CW) of this RF attenuator is 2 Watts. Our fixed radio frequency attenuator with QMA connectors is constructed with brass body material and tri-metal plating. The connectorized bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 2 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This QMA attenuator has a male gender on side 1 and a QMA female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 2 dB. The Pasternack PE7520-2 attenuator is rated for up to 6 GHz. This coaxial attenuator is also suitable for instrumentation, precision measurements, prototyping and characterization, production systems, 5G cellular bands and DAS systems applications. The 2 dB attenuator has a brass connector built with tri-metal plating. Our fixed RF attenuator PE7520-2 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 2 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.
1 : $62.09
25 : $59.61
50 : $57.74
100 : $56.5
4
PE3FCA752-10M

Pasternack Enterprises Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO/UPC Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 12 Fiber, Single Mode OS2, LSZH Jacket-10M. Pasternack’s PE3FCA752-10M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as data center backbone and switch-to-server connectivity, high-density fiber patching and cross-connect systems, 40G and 100G single mode network deployments, MPO trunk to LC equipment breakout applications and enterprise and telecommunications fiber distribution. This fan-out cable has a single mode OS2 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA752-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA752-10M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.
1 : $122.46
5 : $120.01
10 : $117.56
25 : $115.11
0
PE3W07522

Pasternack Enterprises Key Specifications, Connector Series 1: Mini UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. Mini UHF Male to UHF Female Cable Using LMR-195 Coax. PE3W07522 is a Mini UHF male to UHF female cable using LMR-195 coax. This Pasternack Mini UHF male to UHF female cable assembly uses a 50 Ohm Mini UHF for connector 1 and a 50 Ohm UHF for connector 2. Our male Mini UHF to female UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07522 Mini UHF male to UHF female cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.
0
PE37521LF

Pasternack Enterprises Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 75 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm.
0
PE3W07521

Pasternack Enterprises Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C200, RF Cable Type: PE-C200, RF Cable Impedance: 50 Ohm. N Female Bulkhead to SMA Male Cable Using PE-C200 Coax. PE3W07521 is a N female bulkhead to SMA male cable using PE-C200 coax. This Pasternack N female bulkhead to SMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our female N bulkhead to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07521 N female bulkhead to SMA male cable assembly is constructed with PE-C200 coax.
0
PE3W10752

Pasternack Enterprises Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm. SMA Male to SMA Female Low Loss Cable Using PE-C195 Coax., Radio frequency assembly SMA male to SMA female low loss cable using PE-C195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female low loss cable using PE-C195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3W10752 can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W10752 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. SMA plug to SMA jack cable assembly PE3W10752 is built with PE-C195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W10752 can also be used in the other direction and will be a SMA female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements.
0
PE3C7527/HS

Pasternack Enterprises
0
PE3C7527/HS2-36

Pasternack Enterprises Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Mini SMP Female Right Angle to SMA Female Bulkhead Cable 36 Inch Length Using PE-P086 Coax with Double HeatShrink., Radio frequency assembly mini SMP female right angle to SMA female bulkhead cable 36 inch length using PE-P086 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female right angle to SMA female bulkhead cable 36 inch length using PE-P086 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle mini SMP cable connection on one end and a SMA bulkhead cable connection on the other. Our right angle mini SMP to SMA cable assembly has a female gender on end 1 and a female on end 2. PE3C7527/HS2-36 can also be known as a right angle mini SMP jack to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C7527/HS2-36 RF cable has a FEP jacket of 0.104-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 110 dB. Our right angle Mini SMP female to bulkhead SMA female cable has a maximum VSWR of 1.4:1. Mini SMP jack to SMA jack cable assembly PE3C7527/HS2-36 is built with PE-P086 which is a flexible coax type. The Pasternack flexible Mini SMP cable assembly is manufactured with right angle mini SMP to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder attachment method and a brass body with gold plating, while the other has the solder/solder attachment method and a brass body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C7527/HS2-36 can also be used in the other direction and will be a SMA female bulkhead to right angle mini SMP female cable assembly if the opposite connectivity is required. Mini SMP right angle jack to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal Mini SMP to SMA RF cable assembly as per your requirements.
1 : $188.99
10 : $181.43
25 : $173.87
100 : $166.31
0
PE33752-24

Pasternack Enterprises Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male Right Angle to BNC Male Right Angle Cable 24 Inch Length Using RG174 Coax., Radio frequency assembly SMA male right angle to BNC male right angle cable 24 inch length using RG174 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to BNC male right angle cable 24 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle BNC cable connection on the other. Our right angle SMA to right angle BNC cable assembly has male gender on end 1 and male on end 2. PE33752-24 can also be known as a right angle SMA plug to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PE (LD) dielectric type. SMA plug to BNC plug cable assembly PE33752-24 is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle BNC cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE33752-24 RF cable are available on our downloadable PDF datasheet.PE33752-24 can also be used in the other direction and will be right angle BNC male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements.
1 : $149.99
25 : $142.49
50 : $134.99
100 : $128.99
0
PE38752ZLF-24

Pasternack Enterprises Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Water Blue FAKRA Plug to FAKRA Jack Cable 24 Inch Length Using RG174 Coax, LF Solder., Radio frequency assembly water blue FAKRA plug to FAKRA jack cable 24 inch length using RG174 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The water blue FAKRA plug to FAKRA jack cable 24 inch length using RG174 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom FAKRA to FAKRA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a FAKRA cable connection on one end and a FAKRA cable connection on the other. Our FAKRA to FAKRA cable assembly has a plug gender on end 1 and a jack on end 2. PE38752ZLF-24 can also be known as a FAKRA male to FAKRA female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. Our PE38752ZLF-24 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 80 degrees C. The flexible RF cable has an in-series connection. Our FAKRA plug to FAKRA jack cable has a maximum VSWR of 1.4:1. FAKRA male to FAKRA female cable assembly PE38752ZLF-24 is built with RG174 which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to FAKRA cable connectors, has a 50 Ohm impedance, and is single shielded.Both connectors have a crimp/solder attachment method and a plastic body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE38752ZLF-24 can also be used in the other direction and will be a FAKRA jack to FAKRA plug cable assembly if the opposite connectivity is required. FAKRA male to FAKRA female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality FAKRA to FAKRA cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal FAKRA to FAKRA RF cable assembly as per your requirements.
1 : $44.59
25 : $42.36
50 : $40.13
100 : $38.35
0
PE3C4752/SP

Pasternack Enterprises
0
PE3C7520

Pasternack Enterprises Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm.
0

Venkel Ltd.
SWCR0603-TK-752JT

VENKEL LTD Surge Withstanding CR;0603;1/4W;�100PPM;7.5K;�5%
RoHS : Compliant
0
CRG0603-Q-4752FT

VENKEL LTD RoHS 10/10 Green CR;0603;1/10W;47.5K;�1%
RoHS : Compliant
0
TFCR0805-10W-E-4752DT-1K

VENKEL LTD Thin Film CR;0805;1/10W;�25PPM;47.5K;�0.5%
RoHS : Compliant
0
TFCR1206-8W-C-4752FT

VENKEL LTD Thin Film CR;1206;1/8W;�50PPM;47.5K;�1%
RoHS : Compliant
0
TFCR1206-8W-E-4752BT

VENKEL LTD Thin Film CR;1206;1/8W;�25PPM;47.5K;�0.1%
RoHS : Compliant
0
TFCR2010-4W-C-4752DT

VENKEL LTD Thin Film CR;2010;1/4W;�50PPM;47.5K;�0.5%
RoHS : Compliant
0
UPTF0603-16W-N-4752AT-1K

VENKEL LTD Ultra Precision Thin Film CR;0603;1/16W;�10PPM;47.5K;�0.05%
RoHS : Compliant
0
UPTF2512-2W-E-4752AT

VENKEL LTD Ultra Precision Thin Film CR;2512;1/2W;�25PPM;47.5K;�0.05%
RoHS : Compliant
0
AGCR0603-TK-4752DT

VENKEL LTD Auto Grade Resistor;0603;1/4W;�100PPM;47.5K;�0.5%
RoHS : Compliant
0
CR2010-2W-752JT

VENKEL LTD Chip Resistor;2010;1/2W;7.5K;�5%
RoHS : Compliant
0
CR2512-1W-4752FT

VENKEL LTD Chip Resistor;2512;1W;47.5K;�1%
RoHS : Compliant
0
MELFC0102-UZ-4752FT

VENKEL LTD MELF Coated Thin Film CR;0102;1/5W;�15PPM;47.5K;�1%
RoHS : Compliant
0
MELFC0204-TC-4752CT

VENKEL LTD MELF Coated Thin Film CR;0204;1/4W;�50PPM;47.5K;�0.25%
RoHS : Compliant
0
HPTF1210-UC-4752BT

VENKEL LTD High Power Thin Film CR;1210;1/3W;�50PPM;47.5K;�0.1%
RoHS : Compliant
0
HPTF2010-UE-4752UT

VENKEL LTD High Power Thin Film CR;2010;1/3W;�25PPM;47.5K;�0.01%
RoHS : Compliant
0

Win Source Electronics
MF-NSMF075-2

Bourns Inc PTC RESETTABLE .75A 6V 1206
RoHS : Compliant
11,720 : $0.0256
8,745 : $0.0286
6,760 : $0.0296
4,905 : $0.0306
3,175 : $0.0315
1,305 : $0.0384
120,000
UCC27523D

Texas Instruments IC GATE DVR LO-SIDE DL 5A 8SOIC / Driver 5A 2-OUT Low Side Inv 8-Pin SOIC Tube
RoHS : Compliant
635 : $0.476
475 : $0.5309
365 : $0.5492
265 : $0.5675
175 : $0.5858
75 : $0.714
65,875
UCC27524ADGNR

Texas Instruments IC GATE DVR LO-SIDE DL 8MSOP
RoHS : Compliant
240 : $1.2538
180 : $1.3984
140 : $1.4466
105 : $1.4949
65 : $1.5431
30 : $1.8806
20,270
2EDN7523FXTMA1

Infineon Technologies AG IC GATE DRVR LOW-SIDE DSO8
RoHS : Compliant
395 : $0.7609
295 : $0.8487
230 : $0.878
170 : $0.9072
110 : $0.9365
45 : $1.1414
20,000
SC16IS752IPW,112

Nexperia IC UART DUAL 12C/SPI 28TSSOP
57 : $5.2978
43 : $5.9091
33 : $6.1129
24 : $6.3166
16 : $6.5204
7 : $7.9467
11,710
BTM7752

Infineon Technologies AG TrilithIC Half-Bridge Driver 40V 12A TO-263-15
24 : $12.9008
18 : $14.3894
14 : $14.8855
10 : $15.3817
7 : $15.8779
3 : $19.3512
10,000
TL16C752BPTG4

Texas Instruments IC DUAL UART 3.3V W/FIFO 48-LQFP
RoHS : Compliant
28 : $11.0978
22 : $11.5489
17 : $12.0
12 : $12.9023
8 : $13.3534
4 : $14.2557
9,620
TLC7528CDW

Texas Instruments IC DUAL 8-BIT MLTPLY DAC 20-SOIC
RoHS : Compliant
77 : $3.9098
58 : $4.361
45 : $4.5113
33 : $4.6617
21 : $4.8121
9 : $5.8647
6,000
SC16C752BIB48

Nexperia 5 V, 3.3 V and 2.5 V dual UART, 5 Mbit/s (max.), with 64-byte FIFOs
46 : $6.5726
37 : $6.8397
29 : $7.1069
20 : $7.6413
13 : $7.9084
6 : $8.4428
5,862
SC16C752BIB48,157

Nexperia IC UART DUAL W/FIFO 48-LQFP / UART IC 2, DUART Channel 64 Byte 48-LQFP (7x7)
46 : $6.5726
37 : $6.8397
29 : $7.1069
20 : $7.6413
13 : $7.9084
6 : $8.4428
5,560
SC16C752BIB48,128

Nexperia IC DUAL UART 64BYTE 48LQFP
46 : $6.5726
37 : $6.8397
29 : $7.1069
20 : $7.6413
13 : $7.9084
6 : $8.4428
5,540
SC16C752BIB48,151

Nexperia UART Interface IC 16CB 2.5V-5V 2CH
46 : $6.5726
37 : $6.8397
29 : $7.1069
20 : $7.6413
13 : $7.9084
6 : $8.4428
5,330
BTM7752G

Infineon Technologies AG IC MOTOR DRIVER PAR 36DSO
RoHS : Compliant
65 : $5.179
52 : $5.3896
40 : $5.6
28 : $6.0211
18 : $6.2317
9 : $6.6527
5,280
MIC2075-2YM

Microchip Technology Inc IC DISTRIBUTION SW SGL 8-MSOP
RoHS : Compliant
131 : $2.2922
98 : $2.5567
76 : $2.6448
55 : $2.733
36 : $2.8211
15 : $3.4382
3,980
TLC7528IPWR

Texas Instruments IC DUAL 8-BIT MLTPLY DAC 20TSSOP
RoHS : Compliant
42 : $7.1451
32 : $7.9695
25 : $8.2443
18 : $8.5191
12 : $8.7939
5 : $10.7176
1,830

Enlace URL



¿ALLDATASHEET es útil para Ud.?  [ DONATE ]  

Todo acerca de Alldatasheet   |   Publicidad   |   Contáctenos   |   Política de Privacidad   |   Enlace a la hoja de datos    |   Intercambio de Enlaces   |   Lista de Fabricantes
All Rights Reserved짤Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com