600-27SC-R Price, Reseller, Stock

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. TNC Female Bulkhead to N Male Cable 36 Inch Length Using RG141 Coax., Radio frequency assembly TNC female bulkhead to N male cable 36 inch length using RG141 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC female bulkhead to N male cable 36 inch length using RG141 coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC bulkhead cable connection on one end and N type cable connection on the other. Our TNC to type N cable assemblies have a female gender on end 1 and male on end 2. PE3W11600-36 can also be known as a TNC jack to type N plug cable assembly and will be shipped same-day as it is purchased. TNC jack to type N plug cable assembly PE3W11600-36 is built with RG141 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency TNC female bulkhead to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11600-36 can also be used in the other direction and will be N type male to TNC female bulkhead cable assembly if the opposite connectivity is required. TNC jack bulkhead to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female bulkhead to N male cable 36 inch length using RG141 coax.

1 : $139.99
25 : $132.99
50 : $125.99
100 : $120.39

PE3C5600LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: F, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm. 75 Ohm SMB Plug Right Angle to 75 Ohm F Female Bulkhead Cable Using 75 Ohm RG179 Coax, LF Solder. PE3C5600LF is a SMB plug right angle to F female bulkhead cable using RG179 coax. This Pasternack SMB plug right angle to F female bulkhead cable assembly uses a 75 Ohm SMB for connector 1 and a 75 Ohm F for connector 2. SMB right angle to F coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SMB right angle to female F bulkhead cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3C5600LF SMB plug right angle to F female bulkhead cable assembly is constructed with RG179 coax.

PE6008-75

Pasternack Enterprises

Key Specifications, Termination Type: Feed-Thru Load, Connector Series: BNC, Connector Gender: Male, Minimum Frequency: DC, Maximum Frequency: 1 GHz, Impedance: 75 Ohm, Maximum Power: 1 Watt. 1 Watt Feed-Thru Load Up to 1,000 MHz with 75 Ohm BNC Male to Female Nickel Plated Brass. PE6008-75 1 Watts RF load (also known as termination or dummy load) has a BNC connector that is male. This Pasternack 1 watt BNC male load / termination is rated for a maximum frequency of 1 GHz. Our BNC male termination load is a feed-thru load termination with a 75 Ohm impedance. This BNC load / coax terminator is manufactured with no chain. PE6008-75 1 watt BNC male load termination is one of over 40,000 RF, microwave and millimeter wave components in-stock at Pasternack. Our BNC male 1 watt termination load will ship worldwide the same day as purchased.
RoHS : Compliant

1 : $55.69
25 : $52.91
50 : $50.12
100 : $47.89

PE37600LF-144

Pasternack Enterprises

Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG217/U, RF Cable Type: RG217, RF Cable Impedance: 50 Ohm, Length, Max: 144 inches. 7/16 DIN Male to 7/16 DIN Male Right Angle Cable 144 Inch Length Using RG217 Coax, LF Solder., Radio frequency assembly 7/16 DIN male to 7/16 DIN male right angle cable 144 inch length using RG217 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to 7/16 DIN male right angle cable 144 inch length using RG217 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our 7/16 DIN to right angle 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE37600LF-144 can also be known as a 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PE dielectric type. 7/16 DIN plug to 7/16 DIN plug cable assembly PE37600LF-144 is built with RG217 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE37600LF-144 RF cable are available on our downloadable PDF datasheet.PE37600LF-144 can also be used in the other direction and will be right angle 7/16 DIN male to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN RF cable assembly as per your requirements.

1 : $775.99
25 : $737.19
50 : $698.39
100 : $667.35

PE34600-60

Pasternack Enterprises

Key Specifications (Click on Data Sheet Above for Additional Details) .Connector Series 1BananaConnector Gender 1PlugConnector Polarity 1StandardConnector Angle 1StraightConnector Mount Method 1NoneConnector Impedance 10Connector Series 2BananaConnector Gender 2PlugConnector Polarity 2StandardConnector Angle 2StraightConnector Mount Method 2NoneConnector Impedance 20RF Cable Part NumberRG316/URF Cable TypeRG316RF Cable Impedance50. Banana Plug to Banana Plug Cable 60 Inch Length Using RG316 Coax. Very low frequency equipment test lead cable assembly PE34600-60 from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a banana cable connector on side 1. Our banana test lead assembly has a banana connector on side 2. Banana to banana RF test equipment lead cable is manufactured with plug gender for side 1 and plug for side 2. Banana plug to banana plug cable test lead for RF is constructed with RG316 cable and the impedance is 50 Ohm. PE34600-60 Banana plug to banana plug test equipment lead using RG316 cable has a 60 inch length. Pasternack banana to banana RG316 very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with banana to banana connectors and RG316 cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States.

1 : $66.39
25 : $63.07
50 : $59.75
100 : $57.1

PE37600LF

Pasternack Enterprises

Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG217/U, RF Cable Type: RG217, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to 7/16 DIN Male Right Angle Cable Using RG217 Coax, LF Solder., Radio frequency assembly 7/16 DIN male to 7/16 DIN male right angle cable using RG217 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to 7/16 DIN male right angle cable using RG217 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our 7/16 DIN to right angle 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE37600LF can also be known as a 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PE dielectric type. 7/16 DIN plug to 7/16 DIN plug cable assembly PE37600LF is built with RG217 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE37600LF RF cable are available on our downloadable PDF datasheet.PE37600LF can also be used in the other direction and will be right angle 7/16 DIN male to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN RF cable assembly as per your requirements.

PE39804-3600

Pasternack Enterprises

1 : $2,490.0
25 : $2,365.5
50 : $2,241.0
100 : $2,141.4

PE3C4600

Pasternack Enterprises

Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: UMCX 2.5, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. Slide-On BMA Plug Bulkhead to UMCX 2.5 Plug Right Angle Cable Using RG178 Coax. PE3C4600 is a BMA plug bulkhead to UMCX 2.5 plug right angle cable using RG178 coax. This Pasternack BMA plug bulkhead to UMCX 2.5 plug right angle cable assembly uses a 50 Ohm BMA for connector 1 and a 50 Ohm UMCX 2.5 for connector 2. BMA to UMCX 2.5 right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug BMA bulkhead to plug UMCX 2.5 right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C4600 BMA plug bulkhead to UMCX 2.5 plug right angle cable assembly is constructed with RG178 coax.

PE3W16009/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. SMA Male to SMC Plug Cable Using RG405 Coax with HeatShrink. PE3W16009/HS is a SMA male to SMC plug cable using RG405 coax. This Pasternack SMA male to SMC plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMC for connector 2. Our male SMA to plug SMC cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W16009/HS SMA male to SMC plug cable assembly is constructed with RG405 coax.

PE3C9600

Pasternack Enterprises

PE3W03600

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. TNC Male to N Female Cable Using PE-SR405FLJ Coax. PE3W03600 is a TNC male to N female cable using PE-SR405FLJ coax. This Pasternack TNC male to N female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm N for connector 2. Our male TNC to female N cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W03600 TNC male to N female cable assembly is constructed with PE-SR405FLJ coax.

PE317-600

Pasternack Enterprises

1 : $8,680.0
25 : $8,246.0
50 : $7,812.0
100 : $7,464.8

PE37600LF-96

Pasternack Enterprises

Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG217/U, RF Cable Type: RG217, RF Cable Impedance: 50 Ohm, Length, Max: 96 inches. 7/16 DIN Male to 7/16 DIN Male Right Angle Cable 96 Inch Length Using RG217 Coax, LF Solder., Radio frequency assembly 7/16 DIN male to 7/16 DIN male right angle cable 96 inch length using RG217 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to 7/16 DIN male right angle cable 96 inch length using RG217 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our 7/16 DIN to right angle 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE37600LF-96 can also be known as a 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PE dielectric type. 7/16 DIN plug to 7/16 DIN plug cable assembly PE37600LF-96 is built with RG217 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE37600LF-96 RF cable are available on our downloadable PDF datasheet.PE37600LF-96 can also be used in the other direction and will be right angle 7/16 DIN male to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN RF cable assembly as per your requirements.

1 : $732.99
25 : $696.34
50 : $659.69
100 : $630.37

PE3C6002

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to 7/16 DIN Female Cable Using LMR-400 Coax., Radio frequency assembly 7/16 DIN male to 7/16 DIN female cable using LMR-400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN female cable using LMR-400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and female on end 2. This 7/16 DIN to 7/16 DIN cable is a male to female coax assembly, PE3C6002, can also be known as a 7/16 DIN plug to 7/16 DIN jack cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN jack cable assembly PE3C6002 is built with LMR-400 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 7/16 DIN male to 7/16 DIN female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6002 can also be used in the other direction and will be 7/16 DIN female to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to 7/16 DIN jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN female cable using LMR-400 coax.

PE3W06006

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Male Right Angle to TNC Male Cable Using RG178 Coax. PE3W06006 is a reverse polarity TNC male right angle to TNC male cable using RG178 coax. This Pasternack reverse polarity TNC male right angle to TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. TNC right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity male TNC right angle to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W06006 TNC reverse polarity male right angle to TNC male cable assembly is constructed with RG178 coax.

Teledyne HiRel

5962-8776001MRA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-87760012A

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-8776001BRA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

M38510/06006B2A

Teledyne HiRel

OR/NOR GATE, DUAL 4-5 INPUT
RoHS : Not Compliant

M38510/06006B2C

Teledyne HiRel

OR/NOR GATE, DUAL 4-5 INPUT

M38510/06006BEA

Teledyne HiRel

OR/NOR GATE, DUAL 4-5 INPUT
RoHS : Not Compliant

5962-8776001B2A

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-8776001M2A

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-8776001SA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

M38510/06006BFA

Teledyne HiRel

OR/NOR GATE, DUAL 4-5 INPUT

5962-8776001BSA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-8776001MSA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-8776001RA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

Venkel Ltd.

PWCR0402-AK-5600DT

VENKEL LTD

Pulse Withstanding CR;0402;1/5W;�100PPM;560R;�0.5%
RoHS : Compliant

PWCR0805-RK-3600FT

VENKEL LTD

Pulse Withstanding CR;0805;1/8W;�100PPM;360R;�1%
RoHS : Compliant

PWCR1206-VK-5600FT

VENKEL LTD

Pulse Withstanding CR;1206;1/2W;�100PPM;560R;�1%
RoHS : Compliant

HPCR0603-T-5600FT

VENKEL LTD

High Power CR;0603;1/4W;560R;�1%
RoHS : Compliant

HPTF0603-QE-5600UT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�25PPM;560R;�0.01%
RoHS : Compliant

HPTF0603-QN-3600DT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�10PPM;360R;�0.5%
RoHS : Compliant

HPTF0603-SE-5600AT

VENKEL LTD

High Power Thin Film CR;0603;1/6W;�25PPM;560R;�0.05%
RoHS : Compliant

HPTF0805-RP-3600UT

VENKEL LTD

High Power Thin Film CR;0805;1/8W;�5PPM;360R;�0.01%
RoHS : Compliant

HPTF0805-TE-1600FT

VENKEL LTD

High Power Thin Film CR;0805;1/4W;�25PPM;160R;�1%
RoHS : Compliant

HPTF1206-UE-1600CT

VENKEL LTD

High Power Thin Film CR;1206;1/3W;�25PPM;160R;�0.25%
RoHS : Compliant

HPTF2010-UC-1600CT

VENKEL LTD

High Power Thin Film CR;2010;1/3W;�50PPM;160R;�0.25%
RoHS : Compliant

HPTF2010-UN-5600FT

VENKEL LTD

High Power Thin Film CR;2010;1/3W;�10PPM;560R;�1%
RoHS : Compliant

TFCR0201-32W-E-1600BT

VENKEL LTD

Thin Film CR;0201;1/32W;�25PPM;160R;�0.1%
RoHS : Compliant

TFCR0402-16W-C-5600CT

VENKEL LTD

Thin Film CR;0402;1/16W;�50PPM;560R;�0.25%
RoHS : Compliant

TFCR0402-16W-E-1600BT-1K

VENKEL LTD

Thin Film CR;0402;1/16W;�25PPM;160R;�0.1%
RoHS : Compliant

Waytek, Inc.

15326004

Aptiv PLC

10-12GA Female Terminal GT 280 2,000/Reel DELPHI 15326004 Tin Plated 5.00 TO 4.00 MM2
RoHS : Compliant

2,000 : $0.1053
10,000 : $0.101

42,000

19056-0037

Molex

22-18 GA #6 Ring Terminal Non-Insulated Brazed

100 : $0.3597
200 : $0.327
500 : $0.2919
1,000 : $0.264
5,000 : $0.2519

5,894

160-012

AFC Cable Systems Inc

Non-Metallic Electrical Tubing Black 3/8" 100 FT UL LIQUID TIGHT

100 : $0.9533
500 : $0.9005

3,000

190560023

Molex

22-18 GA 1/4" Ring Terminal Non-Insulated Brazed

100 : $0.3724
200 : $0.3386
500 : $0.301
1,000 : $0.2734
5,000 : $0.2608

2,491

15600-06-20

Eaton Electronics

ATO / ATC Fuse Block 6 Gang No Ground

1 : $17.83
10 : $16.07
50 : $14.8
100 : $14.3
200 : $13.79
500 : $13.46

2,105

15600-08-21

Eaton Electronics

ATO / ATC Fuse Block 8 Gang with Ground Terminal

1 : $29.4
5 : $26.22
10 : $24.52
50 : $22.57
100 : $21.46
200 : $20.0

1,191

15600-08-20

Eaton Electronics

ATO / ATC Fuse Block 8 Gang No Ground

1 : $21.6
5 : $19.33
10 : $18.05
50 : $16.59
100 : $15.77
200 : $14.77

1,164

12129600

Aptiv PLC

Metri-Pack 280 Series Male Connector 4 Contact # 12129600
RoHS : Compliant

10 : $0.6293
50 : $0.5632
100 : $0.5107
200 : $0.4925
500 : $0.4765
1,000 : $0.4583

944

1600-037-300-15

30A Circuit Breaker UL1500 50V Ignition Proof Panel Mount UL 1077 7/16" 28 DIECAST MOUNT

1 : $4.5821
50 : $3.8547
100 : $3.3799
200 : $3.1882
500 : $3.0569

265

19076-0015

Molex

16-14 Ga Star Ring Nylon-Ins. #8 Stud

50 : $0.4548
200 : $0.4307
500 : $0.4009
1,000 : $0.3849

123

1810-E1-1-3T-0600-13

60A Circuit Breaker 32V ABYC UL Panel Mount Manual Reset UL 1500 SAE J1428 120VAC

1 : $22.35
5 : $19.96
10 : $18.66
50 : $17.56
100 : $16.77
200 : $15.97

108

15600-10-20

Eaton Electronics

ATO / ATC Fuse Block 10 Gang No Ground

1 : $30.83
5 : $27.58
10 : $25.75
50 : $23.68
100 : $22.5
200 : $21.07

C01600U00000012

Amphenol Sine Systems

Amphenol Sine Systems C01600U00000012 protective cap is a plastic cover for ecomate male cable plugs. This connector accessory helps shield unmated plug interfaces from dust and handling damage and is designed for use with compatible ecomate circular connectors.

1 : $15.15
5 : $14.14
10 : $12.68
50 : $11.95
100 : $10.94
200 : $10.29

63811-6000

Molex

Crimp Tool 33012 Series 22-18GA 63811-6000
RoHS : Compliant

1 : $582.92
10 : $561.65

904-216-001

Littelfuse Inc

Fuse Rivet

100 : $0.6297
200 : $0.5951
500 : $0.5571
1,000 : $0.5328

Win Source Electronics

ZABG6002JB20TC

Diodes Incorporated

IC GENERATOR
RoHS : Compliant

640 : $0.6093
480 : $0.6804
370 : $0.7037
270 : $0.727
175 : $0.7503
75 : $0.9146

339,000

BLM21PG600SN1D/BLM21P600SGPTM00

Murata Manufacturing Co Ltd

12,935 : $0.0232
9,690 : $0.0258
7,495 : $0.0267
5,435 : $0.0276
3,510 : $0.0285
1,445 : $0.0347

213,205

ZXMS6005DGQ-13

Diodes Incorporated

IC PWR LO SIDE INTELLIFET SOT223
RoHS : Compliant

460 : $0.6523
370 : $0.6788
285 : $0.7054
200 : $0.7584
130 : $0.7849
60 : $0.8379

180,000

HCPL-0600-500E/HCPL0600R2

Avago Technologies

845 : $0.3552
680 : $0.3696
525 : $0.384
365 : $0.4129
235 : $0.4274
110 : $0.4562

136,950

MMZ1608R600ATA00

TDK Corporation

FERRITE BEAD 60 OHM 0603 1LN
RoHS : Compliant

35,715 : $0.0084
26,885 : $0.0093
20,620 : $0.0097
15,000 : $0.01
9,710 : $0.0103
4,000 : $0.0125

116,000

P6006BD

Niko Semicondutor Co Ltd

2,885 : $0.1165
2,160 : $0.1299
1,670 : $0.1344
1,210 : $0.1389
785 : $0.1434
325 : $0.1747

50,000

TLV6004IPWR

Texas Instruments

IC OPAMP GP 4 CIRCUIT 14TSSOP / Low-Power, Rail-to-Rail In/Out, 1-MHz Operational Amplifier for Cost-Sensitive Systems
RoHS : Compliant

685 : $0.4396
510 : $0.4903
395 : $0.5073
290 : $0.5242
185 : $0.5411
80 : $0.6594

34,041

LMR16006YQ3DDCRQ1/LMR16006YQ3DDCTQ1

Texas Instruments

109 : $2.7745
87 : $2.8873
67 : $3.0
47 : $3.2256
30 : $3.3384
15 : $3.564

10,390

0216008.MXESPP

Littelfuse Inc

FUSE CERAMIC 8A 250VAC 5X20MM
RoHS : Unknown

945 : $0.3191
705 : $0.356
545 : $0.3682
395 : $0.3805
255 : $0.3928
105 : $0.4787

10,000

T410-600B

STMicroelectronics

TRIAC SENS GATE 600V 4A DPAK
RoHS : Compliant

930 : $0.3629
695 : $0.4048
535 : $0.4188
390 : $0.4328
255 : $0.4467
105 : $0.5443

10,000

SI8600AC-B-IS

Skyworks Solutions Inc

DGTL ISOL 3750VRMS 2CH I2C 8SOIC
RoHS : Compliant

74 : $4.0692
60 : $4.2346
46 : $4.4
32 : $4.7309
21 : $4.8963
10 : $5.2271

9,850

XC3S1600E-4FGG320I

AMD Xilinx

IC FPGA 250 I/O 320FBGA
RoHS : Compliant

6 : $54.2581
5 : $60.5186
4 : $62.6054
3 : $64.6923
2 : $66.7791
1 : $81.3871

5,860

LM46000AQPWPTQ1

Texas Instruments

IC REG BUCK ADJ 500MA 16HTSSOP
RoHS : Compliant

95 : $3.568
71 : $3.9797
55 : $4.1169
40 : $4.2542
26 : $4.3914
11 : $5.352

4,000

0755860011

Molex

CONN MINI SAS RCP 38P SLD RA SMD
RoHS : Compliant

192 : $1.564
144 : $1.7444
111 : $1.8046
81 : $1.8647
52 : $1.9249
22 : $2.3459

1,950

XC3S1600E-5FGG400C

AMD Xilinx

IC FPGA 304 I/O 400FBGA
RoHS : Compliant

5 : $72.8
5 : $72.8
4 : $81.2
3 : $84.0
2 : $86.8
1 : $89.6

800

Wuhan P&S

SF1600-TAP

Vishay Intertechnologies

1600V,1A,Ultrafast Avalanche Diode
RoHS : Compliant

1 : $0.61
100 : $0.22
500 : $0.16
1,000 : $0.15

347,500

MCH6001-TL-E

onsemi

RoHS : Compliant

1 : $0.55
100 : $0.36
500 : $0.29
1,000 : $0.27

12,000

NTMFS5H600NLT1G

onsemi

60V,1.3m��,250A,Single N-Ch Power MOSFET
RoHS : Compliant

1 : $3.62
100 : $2.31
500 : $1.91
1,000 : $1.75

3,000

71600-026LF

Amphenol FCi

IDC Receptacle,Double row,26 P,2.54mm
RoHS : Compliant

1 : $1.4
100 : $1.36
500 : $1.33
1,000 : $1.3

1,080

BTA25-600CW3G

Littelfuse Inc

Triacs Silicon Bidirectional Thyristors
RoHS : Compliant

1 : $1.42
100 : $1.14
500 : $1.05
1,000 : $0.99

550

STUSB4600QTR

STMicroelectronics

1 : $1.13
100 : $1.13
500 : $1.13
1,000 : $1.13

T435-600B-TR

STMicroelectronics

4 A Triacs
RoHS : Compliant

1 : $1.48
100 : $0.5
500 : $0.46
1,000 : $0.45

MICROFJ-SMA-60035-GEVB

onsemi

Evaluation board

1 : $1,167.76
100 : $745.38
500 : $614.61
1,000 : $565.05

600-27SC-R Reseller

Enlace URL