| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
590L-AF5-R Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
![]() DigiKey | 590L-SA-PI | Excelta Corporation | TWEEZERS - FOR 5" WAFERS - SOLID |
| 10 | |
| RTA032590L | Helix Linear Technologies | Threaded Radial Anti-Backlash Nu |
| 10 | ||
| TMA032590L | Helix Linear Technologies | Trunnion Mount Nut (TMA) |
| 10 | ||
| KTA047590L | Helix Linear Technologies | Threaded Torsional Anti-backlash |
| 10 | ||
| KFA032590L | Helix Linear Technologies | Flanged Torsional Anti-backlash |
| 10 | ||
| HLR032590L | Helix Linear Technologies | Round Flange Heavy Load Nut (HLR |
| 10 | ||
| GFD039590L | Helix Linear Technologies | Flanged Torsional Anti-Backlash |
| 10 | ||
| 039590LA-6.00-T | Helix Linear Technologies | Lead Screw |
| 10 | ||
| 047590LA-42.00-S | Helix Linear Technologies | Lead Screw |
| 10 | ||
| 039590LA-18.00-S | Helix Linear Technologies | Lead Screw |
| 10 | ||
| 047590LA-24.00-T | Helix Linear Technologies | Lead Screw |
| 10 | ||
| 047590LS-12.00-S | Helix Linear Technologies | Lead Screw |
| 10 | ||
| 047590LA-48.00-T | Helix Linear Technologies | Lead Screw |
| 10 | ||
| 039590LA-30.00-T | Helix Linear Technologies | Lead Screw |
| 10 | ||
| 039590LA-66.00-S | Helix Linear Technologies | Lead Screw |
| 10 | ||
![]() Avnet Americas | DW-05-12-S-D-590-LL | Samtec Inc | Stacking Board Connector, Locking Lead, DW Series, 10 Contacts, Header, 2.54 mm, Through Hole - Bulk (Alt: DW-05-12-S-D-590-LL) RoHS : Compliant |
| 0 | |
| EW-20-13-G-D-590-LL | Samtec Inc | - Bulk (Alt: EW-20-13-G-D-590-LL) RoHS : Compliant |
| 0 | ||
| S1SDT-15-28-GF-05.90-L1 | Samtec Inc | - Bulk (Alt: S1SDT-15-28-GF-05.90-L1) RoHS : Compliant |
| 0 | ||
| S1SD-04-28-GF-05.90-L | Samtec Inc | Cable Assembly Discrete Wire 28AWG 0.15m 8 Position Discrete Wire Housing Receptacle - Bulk (Alt: S1SD-04-28-GF-05.90-L) RoHS : Compliant |
| 0 | ||
| S1SST-08-28-GF-05.90-L3 | Samtec Inc | - Bulk (Alt: S1SST-08-28-GF-05.90-L3) RoHS : Compliant |
| 0 | ||
| S1SS-20-28-GF-05.90-L3 | Samtec Inc | Cable Assembly Discrete Wire 28AWG 0.15m 20 Position Discrete Wire Housing to 20 Position Discrete - Bulk (Alt: S1SS-20-28-GF-05.90-L3) RoHS : Compliant |
| 0 | ||
| PLT0603Z7590LBTS | Vishay Intertechnologies | SMD Chip Resistor, 759 ohm, ? 0.01%, 150 mW, 0603 [1608 Metric], Thin Film, Precision, PLT Series - Custom Tape W/Leader (Alt: PLT0603Z7590LBTS) RoHS : Not Compliant |
| 0 | ||
| PLT1206Z7590LBTS | Vishay Intertechnologies | SMD Chip Resistor, 759 ohm, ? 0.01%, 400 mW, 1206 [3216 Metric], Thin Film, Precision, PLT Series - Custom Tape W/Leader (Alt: PLT1206Z7590LBTS) RoHS : Not Compliant |
| 0 | ||
| RM590L002D-TR | Nisshinbo Micro Devices | 400MA SYNCHRONOUS BUCK DC/DC MODULE WITH MODE PIN AND INDUCTOR - Tape and Reel (Alt: RM590L002D-TR) RoHS : Not Compliant |
| 0 | ||
| RM590L112B-TR | Nisshinbo Micro Devices | 400MA SYNCHRONOUS BUCK DC/DC MODULE WITH MODE PIN AND INDUCTOR - Tape and Reel (Alt: RM590L112B-TR) RoHS : Not Compliant |
| 0 | ||
| S1SS-14-28C-GF-05.90-L1 | Samtec Inc | - Bulk (Alt: S1SS-14-28C-GF-05.90-L1) RoHS : Compliant |
| 0 | ||
| S1SD-03-30-GF-05.90-L | Samtec Inc | - Bulk (Alt: S1SD-03-30-GF-05.90-L) RoHS : Compliant |
| 0 | ||
| RM590L332B-TR | Nisshinbo Micro Devices | 400MA SYNCHRONOUS BUCK DC/DC MODULE WITH MODE PIN AND INDUCTOR - Tape and Reel (Alt: RM590L332B-TR) RoHS : Not Compliant |
| 0 | ||
| S1SD-04-28-GF-05.90-L1 | Samtec Inc | Cable Assembly Discrete Wire 28AWG 0.15m 8 Position Discrete Wire Housing to 8 Position Discrete Wi - Bulk (Alt: S1SD-04-28-GF-05.90-L1) RoHS : Compliant |
| 0 | ||
| CP17590_LEILA-SC-O-90 | LEDIL | ASSEMBLY/ROUND/1 POS/21.6MM (D)/14.80MM( - Trays (Alt: CP17590_LEILA-SC-O-90) RoHS : Compliant |
| 0 | ||
![]() Newark | CG590L | Littelfuse Inc | GAS DISCHARGE TUBE, 2P, 5KA, 700V, FULL; RoHS : Compliant |
| 998 | |
| CG590L | Littelfuse Inc | GAS DISCHARGE TUBE, 2P, 5KA, 700V, FULL; RoHS : Compliant |
| 998 | ||
| 1590LBFLBK | Hammond Manufacturing | BOX, DIECAST, FLANGED, 50X50X31MM; RoHS : Compliant |
| 143 | ||
| AD590LH | Analog Devices Inc | TEMPERATURE TRANSDUCER, 1DEG C, TO-52-3; RoHS : Compliant |
| 140 | ||
| AD590LF | Analog Devices Inc | TEMP TRANSDUCER, 150DEG C, FLATPACK-2; RoHS : Compliant |
| 130 | ||
| 1590LB | Hammond Manufacturing | Enclosure, Diecast, EMI / RFI, IP54, Ins; (Alternate Part Number: 623980542607 RoHS : Compliant |
| 64 | ||
| 1590LBFL | Hammond Manufacturing | BOX, DIECAST, IP54, 51X51X31MM; (Alternate Part Number: 623980676593 RoHS : Compliant |
| 55 | ||
| HMC590LP5E | Analog Devices Inc | RF AMPLIFIER, QFN-EP-32, -55 TO 85DEG C; RoHS : Compliant |
| 40 | ||
| 1590LB | Hammond Manufacturing | BOX, DIECAST, IP54, 51X51X31MM; (Alternate Part Number: 623980542607 RoHS : Compliant |
| 26 | ||
| 1590LBBK | Hammond Manufacturing | BOX, DIECAST, BLACK, 51X51X31MM; RoHS : Compliant |
| 23 | ||
| 1590LLBBK | Hammond Manufacturing | BOX, DIECAST, IP54, 50X50X25MM; RoHS : Compliant |
| 15 | ||
| 1590LLB | Hammond Manufacturing | ENCLOSURE, INSTRUMENT, ALUMINUM; ENCLOSU (Alternate Part Number: 623980808796 RoHS : Compliant |
| 6 | ||
| 1590LLBFLBK | Hammond Manufacturing | ENCLOSURE, ALUMINIUM, IP54, BLACK; RoHS : Compliant |
| 2 | ||
| AD590LF/883B | Analog Devices Inc | TEMPERATURE SENSOR, 150DEG C, FLATPACK-2; RoHS : Not Compliant |
| 0 | ||
| AD590LH/883B | Analog Devices Inc | TEMPERATURE TRANSDUCER, 1DEG C, TO-52-3; RoHS : Not Compliant |
| 0 | ||
![]() Analog Devices Inc | AD590LF/883B | Analog Devices Inc | TEMPERATURE TRANSDUCER IC RoHS : Not Compliant |
| 26,587 | |
| MAX32590-L5J+ | Analog Devices Inc | DEEP COVER HIGH PERFORMANCE SE RoHS : Compliant | 5,244 | |||
| AD590LF | Analog Devices Inc | TEMPERATURE TRANSDUCER IC RoHS : Compliant |
| 539 | ||
| HMC590LP5ETR | Analog Devices Inc | 1 Watt pow amp SMT, 6.0 - 9.5 RoHS : Compliant |
| 500 | ||
| AD590LH/883B | Analog Devices Inc | AD534JHZTEMPERATURE TRANSDUCER RoHS : Not Compliant |
| 304 | ||
| HMC590LP5E | Analog Devices Inc | 1 Watt pow amp SMT, 6.0 - 9.5 RoHS : Compliant |
| 109 | ||
| AD590LH | Analog Devices Inc | TEMPERATURE TRANSDUCER IC RoHS : Compliant |
| 68 | ||
| 115927-HMC590LP5 | Analog Devices Inc | HMC590LP5 Evaluation PCB |
| 11 | ||
| MAX32590-L5S+ | Analog Devices Inc | DEEP COVER HIGH PERFORMANCE SE RoHS : Compliant | 0 | |||
| MAX32590-LNJ+ | Analog Devices Inc | DEEP COVER HIGH PERFORMANCE SE RoHS : Compliant | 0 | |||
| MAX32590-LNS+ | Analog Devices Inc | HIGH PERFORMANCE SECURE UC W/A RoHS : Compliant | 0 | |||
![]() RS | XCSDMP590L01M12 | Telemechanique Sensors | XCS-DMP MAGNETIC NON-CONTACT SAFETY SWITCH, CODED ACTUATOR, PLASTIC, 24VDC |
| 11 | |
| XCSDMC590L01M8 | Telemechanique Sensors | XCS-DMC MAGNETIC NON-CONTACT SAFETY SWITCH, CODED ACTUATOR, PLASTIC, 24VDC |
| 8 | ||
| 1590LB | Hammond Manufacturing | ENCLOSURE, BOX-LID, ALUMINUM, DIECAST, NATURAL,1.988X1.988X1.186 IN, IP54,1590 SERIES RoHS : Compliant |
| 3 | ||
| 1590L | Hammond Manufacturing | ENCLOSURE, BOX-LID, ALUMINUM, DIE CAST, NATURAL, 3.96X2X1 IN, IP54, 1590 SERIES RoHS : Compliant |
| 0 | ||
| CG590LS | Littelfuse Inc | GP S.A. STANDARD 90V NOMINAL SMT RoHS : Compliant |
| 0 | ||
| 1590LLB | Hammond Manufacturing | ENCLOSURE, BOX-LID, ALUMINUM, DIECAST, NATURAL,1.969X1.969X0.984 IN, IP54,1590 SERIES RoHS : Compliant |
| 0 | ||
| 1590LBGY | Hammond Manufacturing | ENCLOSURES, DIECAST ALUM GRAY 1.99 X 1.99 X 1.06 |
| 0 | ||
| 1590LBFLBK | Hammond Manufacturing | ENCLOSURE, FLANGED LID, ALUMINUM, DIE CAST, BLACK,1.99X1.99X1.06 IN,1590 SERIES RoHS : Compliant |
| 0 | ||
| 1590LLBFBK | Hammond Manufacturing | ENCLOSURES, DIECAST ALUM WFLANGE 1.97X0.83X1.97BLACK RoHS : Compliant |
| 0 | ||
| XCSDMP590L05M8 | Telemechanique Sensors | SWITCH, CODED MAGNETIC SWITCH, SAFETY SWITCHES |
| 0 | ||
| ZARF2590-L-TV-A | INA Bearings | NEEDLE ROLLER/AXIAL CYLINDRICAL RB, 25MM ID, 90MM OD, 75MM WIDTH |
| 0 | ||
| XCSDMR590L01M12 | Telemechanique Sensors | XCS-DMR MAGNETIC NON-CONTACT SAFETY SWITCH, CODED ACTUATOR, PLASTIC, 24VDC |
| 0 | ||
| 45-4590-LITE-3M-BLACK-FB | 80/20 Inc | 45MM X 90MM LITE T-SLOTTED EXTRUSION 3MFULL BLACK ANODIZED |
| 0 | ||
| SGE-225-0-0590L 05000C-05000C (701771360) | OMRON Scientific Technologies Inc | SGE-225-0-0590L 05000C-05000C |
| 0 | ||
| LTIGK54-6S-BL-RC-MBL/125N (TGL-52851590|LTIGK54-6S-BL-RC-MBL/125N|LTIGK546SBLRCM | Carling Technologies | ROCKER SWITCH, FULL SIZED, TIPPETTE SERIES |
| 0 | ||
![]() Bisco Industries | 1590LBBK | Hammond Manufacturing | RoHS : Compliant | 1 | ||
![]() Rochester Electronics | AD590LF/883B | Analog Devices Inc | Temperature Sensor ICs Analog Current Analog, Local/Remote 2-CFP Box RoHS : Not Compliant |
| 24,562 | |
| AD590LH | Analog Devices Inc | Temperature Sensor ICs Analog Current Analog, Local/Remote TO52 Box RoHS : Compliant |
| 2 | ||
| AD590LH/883B | Analog Devices Inc | Temperature Sensor ICs Analog Current Analog, Local/Remote TO52 Box RoHS : Not Compliant |
| 666 | ||
| RM590L092B-TR | Nisshinbo Micro Devices | Switching Regulator RoHS : Compliant |
| 20,000 | ||
| RM590L112B-TR | Nisshinbo Micro Devices | Switching Regulator RoHS : Compliant |
| 18,000 | ||
| RM590L152B-TR | Nisshinbo Micro Devices | Switching Regulator RoHS : Compliant |
| 16,000 | ||
| RM590L162B-TR | Nisshinbo Micro Devices | Switching Regulator RoHS : Compliant |
| 20,000 | ||
| RM590L252B-TR | Nisshinbo Micro Devices | Switching Regulator RoHS : Compliant |
| 14,000 | ||
| 2SK1335-90L | Renesas Electronics Corporation | Power Field-Effect Transistor, 3A, 200V, N-Channel MOSFET RoHS : Not Compliant |
| 1,810 | ||
![]() TME | CG590LS | Littelfuse Inc | Arrester: surge arrester; SMD; Ubr type: 90V; 1.5pF; 10GΩ RoHS : Compliant |
| 79 | |
| 1590LBFLBK | Hammond Manufacturing | Enclosure: multipurpose; X: 51mm; Y: 51mm; Z: 31mm; with fixing lugs RoHS : Compliant |
| 26 | ||
| 1590LB | Hammond Manufacturing | Enclosure: multipurpose; X: 51mm; Y: 51mm; Z: 27mm; 1590; aluminium RoHS : Compliant |
| 22 | ||
| 1590LLBBK | Hammond Manufacturing | Enclosure: multipurpose; X: 50mm; Y: 50mm; Z: 25mm; 1590; aluminium RoHS : Compliant |
| 14 | ||
| XCSDMR590L01M12 | Telemechanique Sensors | Safety switch: magnetic; XCSDMR; NC + NO; IP67; plastic; 100mA |
| 9 | ||
| XCSDMC590L01M8 | Telemechanique Sensors | Safety switch: magnetic; XCS; NC + NO; Features: with key; IP66 |
| 8 | ||
| 1590LLBF | Hammond Manufacturing | Enclosure: multipurpose; X: 50mm; Y: 50mm; Z: 25mm; with fixing lugs RoHS : Compliant |
| 1 | ||
| 1590LLBFL | Hammond Manufacturing | Enclosure: multipurpose; X: 50mm; Y: 50mm; Z: 21mm; with fixing lugs RoHS : Compliant |
| 1 | ||
| 1590LF | Hammond Manufacturing | Enclosure: multipurpose; X: 50mm; Y: 101mm; Z: 25mm; 1590; aluminium RoHS : Compliant |
| 1 | ||
| 1590LLBFBK | Hammond Manufacturing | Enclosure: multipurpose; X: 50mm; Y: 50mm; Z: 25mm; with fixing lugs RoHS : Compliant |
| 1 | ||
| 1590LLBFLBK | Hammond Manufacturing | Enclosure: multipurpose; X: 50mm; Y: 50mm; Z: 21mm; with fixing lugs RoHS : Compliant |
| 0 | ||
| 0805W8F590LT5E | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 590mΩ; SMD; 0805; 125mW; ±1%; 150V; -55÷125°C |
| 0 | ||
| AD590LH | Analog Devices Inc | IC: temperature sensor; transducer; -55÷150°C; TO52; THT; 4÷30V RoHS : Compliant |
| 0 | ||
| 25121WF590LT4E | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 590mΩ; SMD; 2512; 1W; ±1%; 200V; -55÷125°C RoHS : Compliant |
| 0 | ||
| 1206W4F590LT5E | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 590mΩ; SMD; 1206; 250mW; ±1%; 200V; -55÷125°C RoHS : Compliant |
| 0 | ||
![]() Powell Electronics | 1590LBFLBK | Hammond Manufacturing | 1590LB FLANGED LID BLACK RoHS : Compliant |
| 5,438 | |
| 1590LBFL | Hammond Manufacturing | 1590LB WITH FLANGED LID RoHS : Compliant |
| 1,121 | ||
| 1590L | Hammond Manufacturing | DIECAST BOX 4.0X2.0X1.0 C90 RoHS : Compliant |
| 574 | ||
| DW-05-12-S-D-590-LL | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 387 | ||
| DW-07-12-L-D-590-LL | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 328 | ||
| DW-04-11-G-D-590-LL | Samtec Inc | Cable Assembly, Wire-to-Board, Dual-Row RoHS : Compliant |
| 281 | ||
| DW-06-13-L-D-590-LL | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 198 | ||
| DW-13-12-L-D-590-LL | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 196 | ||
| DW-17-12-G-D-590-LL | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 150 | ||
| EW-20-13-G-D-590-LL | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 71 | ||
| 1590LBFBK | Hammond Manufacturing | 1590LBBK WITH FLANGE RoHS : Compliant |
| 61 | ||
| 1590LBGASKET | Hammond Manufacturing | SILICONE GASKET- 2 PACK RoHS : Compliant |
| 41 | ||
| EW-32-13-G-D-590-LL | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 38 | ||
| 1590LLBFLBK | Hammond Manufacturing | DIECAST BOX W/FLANGE LID BLACK RoHS : Compliant |
| 17 | ||
| 1590LLBFL | Hammond Manufacturing | DIECAST BOX W/FLANGE LID RoHS : Compliant |
| 14 | ||
![]() Richardson RFPD | HMC590LP5E | Analog Devices Inc | RF Amp Single Power Amp 9.5GHz 8V 32-Pin QFN EP T/ RoHS : Compliant |
| 64 | |
| HMC590LP5ETR | Analog Devices Inc | RF Amp Single Power Amp 9.5GHz 8V 32-Pin QFN EP T/ RoHS : Compliant |
| 0 | ||
| AD590LF/883B | Analog Devices Inc | Temp Sensor Analog 2-Pin CFPAK Tray RoHS : Not Compliant | 0 | |||
| AD590LH | Analog Devices Inc | Temp Sensor Analog 3-Pin TO-52 Tube RoHS : Compliant |
| 0 | ||
| 10-PZ09NBC033ME06-L590L32Y | Vincotech | SIC MODULES RoHS : Compliant | 0 | |||
| 115927-HMC590LP5 | Analog Devices Inc | HMC590LP5/HMC590LP5E RF Amplifier Evaluation Board RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | MAX32590-L5S+ | Maxim Integrated Products | INSTOCK RoHS : Compliant | 10,387 | ||
![]() Avnet Abacus | DW-13-12-L-D-590-LL | Samtec Inc | Stacking Board Connector Locking Lead DW Series 26 Contacts Header 254 mm Through Hole (Alt: DW-13-12-L-D-590-LL) RoHS : Compliant | 0 | ||
| S1SST-07-28-GF-05.90-L | Samtec Inc | (Alt: S1SST-07-28-GF-05.90-L) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 1590LBK | Hammond Manufacturing | IN STOCK SHIP TODAY RoHS : Compliant |
| 10 | |
![]() EBV Elektronik | RM590L | Nisshinbo Micro Devices | AC 8C 812 SKT PLUG (Alt: RM590L) RoHS : Compliant | 0 | ||
| CP17590_LEILA-SC-O-90 | LEDIL | ASSEMBLYROUND1 POS216MM D1480MM (Alt: CP17590_LEILA-SC-O-90) RoHS : Compliant | 0 | |||
![]() Master Electronics | SESDT-15-32-G-59.0-L1 | Samtec Inc | RoHS : Compliant |
| 0 | |
| SGE22500590L05000C050 | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| MRTD-04-28-L-59.0-L1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-05-12-S-D-590-LL | Samtec Inc | .100 Flex Stack Flexible Board Stacker .110 Tail RoHS : Compliant |
| 0 | ||
| S1SDT-15-28-GF-05.90-L1 | Samtec Inc | MICRO MATE DOUBLE ROW DI RoHS : Compliant |
| 0 | ||
| S1SD-04-28-GF-05.90-L | Samtec Inc | MICRO MATE DOUBLE ROW DI RoHS : Compliant |
| 0 | ||
| S1SD-05-30-GF-05.90-L | Samtec Inc | RoHS : Compliant |
| 0 | ||
| S1SDT-06-28-GF-05.90-L | Samtec Inc | RoHS : Compliant |
| 0 | ||
| S1SS-05-28-GF-05.90-L | Samtec Inc | RoHS : Compliant |
| 0 | ||
| S1SS-06-30-GF-05.90-L | Samtec Inc | RoHS : Compliant |
| 0 | ||
| S1SST-08-28-GF-05.90-L3 | Samtec Inc | MICRO MATE SINGLE ROW DI RoHS : Compliant |
| 0 | ||
| DW-10-10-L-D-590-LL | Samtec Inc | .100 Flex Stack Flexible Board Stacker .110 Tail RoHS : Compliant |
| 0 | ||
| S1SD-04-30-GF-05.90-L1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| S1SS-20-28-GF-05.90-L3 | Samtec Inc | Rectangular Cable Assemblies Micro Mate Single Row Discrete Wire Cable Assembly 1.00 mm Pitch RoHS : Compliant |
| 0 | ||
| DW-06-11-F-S-590-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 1590LBFLBK | Hammond Manufacturing | Enclosures, Boxes, & Cases Diecast Alum wFlange 1.99x1.06x1.99"Blac RoHS : Compliant |
| 50 | |
| 1590L | Hammond Manufacturing | Enclosures, Boxes, & Cases Diecast Alum. w/Ribs 3.96x1.98" Natural RoHS : Compliant |
| 50 | ||
| 1590LBFL | Hammond Manufacturing | Enclosures, Boxes, & Cases Diecast Alum wFlange 2x1.1x2"Natural RoHS : Compliant |
| 50 | ||
| XCSDMP590L01M12 | Telemechanique Sensors | Magnetic / Reed Switches SAFETY INTERLOCK 24VDC 100A, Type XCS |
| 50 | ||
| 1590LBBK | Hammond Manufacturing | Enclosures, Boxes, & Cases Diecast Aluminum Box 1.1x1.99x1.99" Black RoHS : Compliant |
| 50 | ||
| 1590LLBFL | Hammond Manufacturing | Enclosures, Boxes, & Cases Diecast Alum wFlange 1.97x1.97x.83"UNPTD RoHS : Compliant |
| 41 | ||
| 00V7590L | Lenovo | IBM LTO Ultrium-6 Data Cartridge |
| 36 | ||
| XCSDMC590L01M8 | Telemechanique Sensors | Magnetic / Reed Switches SHORT MGNTC SAFETY SWITCH CONTACT |
| 14 | ||
![]() Pasternack Enterprises US | PE3W12590LF/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-FR, RF Cable Type: LMR-400-FR, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Fire Rated N Male to N Male Right Angle Low Loss Cable 48 Inch Length Using LMR-400-FR Coax with HeatShrink, LF Solder., Radio frequency assembly fire rated N male to N male right angle low loss cable 48 inch length using LMR-400-FR coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male to N male right angle low loss cable 48 inch length using LMR-400-FR coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our low loss type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3W12590LF/HS-48 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W12590LF/HS-48 RF cable has a FRPE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W12590LF/HS-48 is built with LMR-400-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W12590LF/HS-48 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | |
| PE34590LF-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 24 inches. 3.5mm Male to 3.5mm Female Bulkhead Cable 24 Inch Length Using RG405 Coax, RoHS., Radio frequency assembly 3.5mm male to 3.5mm female bulkhead cable 24 inch length using RG405 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 3.5mm male to 3.5mm female bulkhead cable 24 inch length using RG405 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 3.5mm to 3.5mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 3.5mm cable connection on one end and 3.5mm bulkhead cable connection on the other. Our 3.5mm to 3.5mm cable assemblies have a male gender on end 1 and female on end 2. This 3.5mm to 3.5mm cable is a male to female coax assembly, PE34590LF-24, can also be known as a 3.5mm plug to 3.5mm jack cable assembly and will be shipped same-day as it is purchased. 3.5mm plug to 3.5mm jack cable assembly PE34590LF-24 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid 3.5mm cable assembly is manufactured with 3.5mm to 3.5mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3.5mm male to 3.5mm female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34590LF-24 can also be used in the other direction and will be 3.5mm female bulkhead to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to 3.5mm jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to 3.5mm cable assembly for quick shipment worldwide. Variations of 3.5mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3.5mm male to 3.5mm female bulkhead cable 24 inch length using RG405 coax, RoHS. |
| 0 | ||
| PE3C1590LF/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male Right Angle to SMA Female Low Loss Cable 24 Inch Length Using LMR-195 Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male right angle to SMA female low loss cable 24 inch length using LMR-195 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to SMA female low loss cable 24 inch length using LMR-195 coax with heatshrink, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and SMA cable connection on the other. Our low loss right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. PE3C1590LF/HS-24 can also be known as a low loss right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3C1590LF/HS-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA right angle male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1590LF/HS-24 can also be used in the other direction and will be SMA female to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female low loss cable 24 inch length using LMR-195 coax with heatshrink, LF solder. |
| 0 | ||
| PE3W12590LF/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-FR, RF Cable Type: LMR-400-FR, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Fire Rated N Male to N Male Right Angle Low Loss Cable 36 Inch Length Using LMR-400-FR Coax with HeatShrink, LF Solder., Radio frequency assembly fire rated N male to N male right angle low loss cable 36 inch length using LMR-400-FR coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male to N male right angle low loss cable 36 inch length using LMR-400-FR coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our low loss type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3W12590LF/HS-36 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W12590LF/HS-36 RF cable has a FRPE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W12590LF/HS-36 is built with LMR-400-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W12590LF/HS-36 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W16590LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm. N Female Bulkhead to Reverse Polarity TNC Male Right Angle Cable Using LMR-195-UF Coax, LF Solder. PE3W16590LF is a N female bulkhead to reverse polarity TNC male right angle cable using LMR-195-UF coax. This Pasternack N female bulkhead to reverse polarity TNC male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. N to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female N bulkhead to reverse polarity male TNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16590LF N female bulkhead to TNC reverse polarity male right angle cable assembly is constructed with LMR-195-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE39590LF | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm. TNC Female to N Female Cable Using RG214 Coax, LF Solder. PE39590LF is a TNC female to N female cable using RG214 coax. This Pasternack TNC female to N female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm N for connector 2. Our female TNC to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE39590LF TNC female to N female cable assembly is constructed with RG214 coax. | 0 | |||
| PE34590LF-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 12 inches. 3.5mm Male to 3.5mm Female Bulkhead Cable 12 Inch Length Using RG405 Coax, RoHS., Radio frequency assembly 3.5mm male to 3.5mm female bulkhead cable 12 inch length using RG405 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 3.5mm male to 3.5mm female bulkhead cable 12 inch length using RG405 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 3.5mm to 3.5mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 3.5mm cable connection on one end and 3.5mm bulkhead cable connection on the other. Our 3.5mm to 3.5mm cable assemblies have a male gender on end 1 and female on end 2. This 3.5mm to 3.5mm cable is a male to female coax assembly, PE34590LF-12, can also be known as a 3.5mm plug to 3.5mm jack cable assembly and will be shipped same-day as it is purchased. 3.5mm plug to 3.5mm jack cable assembly PE34590LF-12 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid 3.5mm cable assembly is manufactured with 3.5mm to 3.5mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3.5mm male to 3.5mm female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34590LF-12 can also be used in the other direction and will be 3.5mm female bulkhead to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to 3.5mm jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to 3.5mm cable assembly for quick shipment worldwide. Variations of 3.5mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3.5mm male to 3.5mm female bulkhead cable 12 inch length using RG405 coax, RoHS. |
| 0 | ||
| PE3C1590LF/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male Right Angle to SMA Female Low Loss Cable 12 Inch Length Using LMR-195 Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male right angle to SMA female low loss cable 12 inch length using LMR-195 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to SMA female low loss cable 12 inch length using LMR-195 coax with heatshrink, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and SMA cable connection on the other. Our low loss right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. PE3C1590LF/HS-12 can also be known as a low loss right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3C1590LF/HS-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA right angle male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1590LF/HS-12 can also be used in the other direction and will be SMA female to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female low loss cable 12 inch length using LMR-195 coax with heatshrink, LF solder. |
| 0 | ||
| PE3C1590LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3W20590LF | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. BNC Female 4 Hole Flange to SMA Male Cable Using PE-P195 Coax, LF Solder. PE3W20590LF is a BNC female 4 hole flange to SMA male cable using PE-P195 coax. This Pasternack BNC female 4 hole flange to SMA male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. Our female BNC 4 hole flange to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20590LF BNC female 4 hole flange to SMA male cable assembly is constructed with PE-P195 coax. | 0 | |||
| PE3W12590LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-FR, RF Cable Type: LMR-400-FR, RF Cable Impedance: 50 Ohm. N Male to N Male Right Angle Cable Using LMR-400-FR Coax, LF Solder. PE3W12590LF is a N male to N male right angle cable using LMR-400-FR coax. This Pasternack N male to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12590LF N male to N male right angle cable assembly is constructed with LMR-400-FR coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W06590LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. MMCX Plug to N Male Cable Using RG316 Coax with HeatShrink, LF Solder. PE3W06590LF/HS is a MMCX plug to N male cable using RG316 coax. This Pasternack MMCX plug to N male cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm N for connector 2. Our plug MMCX to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W06590LF/HS MMCX plug to N male cable assembly is constructed with RG316 coax. | 0 | |||
| PE3C1590LF/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Female Low Loss Cable Using LMR-195 Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male right angle to SMA female low loss cable using LMR-195 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to SMA female low loss cable using LMR-195 coax with heatshrink, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and SMA cable connection on the other. Our low loss right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. PE3C1590LF/HS can also be known as a low loss right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3C1590LF/HS is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA right angle male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1590LF/HS can also be used in the other direction and will be SMA female to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female low loss cable using LMR-195 coax with heatshrink, LF solder. | 0 | |||
| PE34590LF-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 48 inches. 3.5mm Male to 3.5mm Female Bulkhead Cable 48 Inch Length Using RG405 Coax, RoHS., Radio frequency assembly 3.5mm male to 3.5mm female bulkhead cable 48 inch length using RG405 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 3.5mm male to 3.5mm female bulkhead cable 48 inch length using RG405 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 3.5mm to 3.5mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 3.5mm cable connection on one end and 3.5mm bulkhead cable connection on the other. Our 3.5mm to 3.5mm cable assemblies have a male gender on end 1 and female on end 2. This 3.5mm to 3.5mm cable is a male to female coax assembly, PE34590LF-48, can also be known as a 3.5mm plug to 3.5mm jack cable assembly and will be shipped same-day as it is purchased. 3.5mm plug to 3.5mm jack cable assembly PE34590LF-48 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid 3.5mm cable assembly is manufactured with 3.5mm to 3.5mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3.5mm male to 3.5mm female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34590LF-48 can also be used in the other direction and will be 3.5mm female bulkhead to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to 3.5mm jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to 3.5mm cable assembly for quick shipment worldwide. Variations of 3.5mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3.5mm male to 3.5mm female bulkhead cable 48 inch length using RG405 coax, RoHS. |
| 0 | ||
| PE3C1590LF/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male Right Angle to SMA Female Low Loss Cable 48 Inch Length Using LMR-195 Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male right angle to SMA female low loss cable 48 inch length using LMR-195 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to SMA female low loss cable 48 inch length using LMR-195 coax with heatshrink, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and SMA cable connection on the other. Our low loss right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. PE3C1590LF/HS-48 can also be known as a low loss right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3C1590LF/HS-48 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA right angle male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1590LF/HS-48 can also be used in the other direction and will be SMA female to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female low loss cable 48 inch length using LMR-195 coax with heatshrink, LF solder. |
| 0 | ||
![]() Sager | DW-05-12-S-D-590-LL | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header with Fixed Tail Length, 0.100 Pitch RoHS : Compliant |
| 586 | |
| EW-20-13-G-D-590-LL | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header with Fixed Tail Length, 0.100 Pitch RoHS : Compliant |
| 108 | ||
| S1SDT-15-28-GF-05.90-L1 | Samtec Inc | Rectangular Cable Assemblies Micro Mate Double Row Discrete Teflon Wire Cable Assembly, 1.00 mm Pitch RoHS : Compliant |
| 0 | ||
| S1SD-04-28-GF-05.90-L | Samtec Inc | Rectangular Cable Assemblies Micro Mate Double Row Discrete Wire Cable Assembly, 1.00 mm Pitch RoHS : Compliant |
| 0 | ||
| S1SD-05-30-GF-05.90-L | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| S1SDT-06-28-GF-05.90-L | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| S1SST-08-28-GF-05.90-L3 | Samtec Inc | MICRO MATE� SINGLE ROW DISCRETE WIRE CABLE ASSEMBLY, TEFLON� FLUOROPOLYMER WIRE, 1.00 MM PITCH RoHS : Compliant |
| 0 | ||
| DW-10-10-L-D-590-LL | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| S1SS-20-28-GF-05.90-L3 | Samtec Inc | Rectangular Cable Assemblies Micro Mate Single Row Discrete Wire Cable Assembly, 1.00 mm Pitch RoHS : Compliant |
| 0 | ||
| S1SS-10-28-GF-05.90-L3 | Samtec Inc | Rectangular Cable Assemblies Micro Mate Single Row Discrete Wire Cable Assembly, 1.00 mm Pitch RoHS : Compliant |
| 0 | ||
| S1SST-10-28-GF-05.90-L1 | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| S1SS-14-28C-GF-05.90-L1 | Samtec Inc | MICRO MATE�Ѣ SINGLE ROW DISCRETE WIRE CABLE ASSEMBLY, 1.00 MM PITCH RoHS : Compliant |
| 0 | ||
| DW-01-11-G-D-590-LL | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| CG590LS | Littelfuse Inc | GP S.A. STANDARD 90V NOMINAL SMT RoHS : Compliant |
| 0 | ||
| S1SD-03-30-GF-05.90-L | Samtec Inc | Rectangular Cable Assemblies Micro Mate Double Row Discrete Wire Cable Assembly, 1.00 mm Pitch RoHS : Compliant |
| 0 | ||
![]() Vyrian | AD590LH/+ | Analog Devices Inc | Analog Circuit RoHS : Not Compliant | 12,178 | ||
| MAX32590-L5S+ | Analog Devices Inc | Microcontroller, 32-Bit, ARM926EJ-S92 CPU, 384MHz, CMOS, PBGA324 RoHS : Compliant | 11,302 | |||
| AD590LH/883B | Analog Devices Inc | Analog Resistance Sensor, 298.2uA, Round, 3 Pin, Through Hole Mount RoHS : Not Compliant | 10,967 | |||
| MAX32590-LNJ+ | Analog Devices Inc | Microcontroller, 32-Bit, ARM926EJ-S92 CPU, 384MHz, CMOS, PBGA324 RoHS : Compliant | 10,394 | |||
| MAX32590-L5J+ | Analog Devices Inc | Microcontroller, 32-Bit, ARM926EJ-S92 CPU, 384MHz, CMOS, PBGA324 RoHS : Compliant | 10,348 | |||
| 115927-HMC590LP5 | Analog Devices Inc | 9,462 | ||||
| MAX32590-LNS | Analog Devices (Maxim Integrated) | 9,234 | ||||
| HMC590LP5TR | Analog Devices Inc | Wide Band Medium Power Amplifier, 6000MHz Min, 9500MHz Max, 1 Func, GAAS RoHS : Compliant | 8,776 | |||
| AD590LF/+ | Analog Devices Inc | Analog Circuit RoHS : Not Compliant | 8,266 | |||
| CG590LS | Littelfuse Inc | Gas Discharge Tube Suppressor RoHS : Compliant | 7,498 | |||
| AD590LH/QMLR | Analog Devices Inc | 6,994 | ||||
| AD590LH | Analog Devices Inc | Analog Resistance Sensor, 298.2uA, Round, 3 Pin, Through Hole Mount RoHS : Compliant | 6,922 | |||
| AD590LF/883B | Analog Devices Inc | Analog Resistance Sensor, 298.2uA, Rectangular, 2 Pin, Through Hole Mount RoHS : Not Compliant | 6,617 | |||
| HMC590LP5ETR | Analog Devices Inc | Wide Band Medium Power Amplifier, 6000MHz Min, 9500MHz Max RoHS : Compliant | 6,348 | |||
| CG590L-02 | Littelfuse Inc | Gas Discharge Tube Suppressor RoHS : Compliant | 5,349 | |||
![]() Waytek, Inc. | 12084590-L | Aptiv PLC | Metri-Pack 630 Female 12 GA 12084590 Loose Terminal |
| 13,731 | |
![]() Win Source Electronics | AD590LH | Analog Devices Inc | Two-Terminal IC Temperature Transducer RoHS : Compliant |
| 2,269 | |
| AD590LF | Analog Devices Inc | SENSOR ANALOG -55C-150C 2FLATPK RoHS : Compliant |
| 500 | ||
MAX32590-LNS+![]() | Maxim Integrated Products | IC MCU 32BIT ROMLESS 324CSBGA RoHS : Compliant |
| 44 | ||
| AD590LF/883B | Analog Devices Inc | AD590LF/883B RoHS : Not Compliant |
| 25 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |