| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty.
BuyNow |
TME | 1123548
| Bossard Group | Screw; M3; M3x5; 0.5; Head: cheese head; slotted; 0.8mm; steel; zinc | 10,000 : $0.0094
5,000 : $0.0111
1,000 : $0.0123
|
| 3,000
 |
054-8005-03
| TE Connectivity | Gasket for wire; yellow | | 3
|
1045481-1
| TE Connectivity | Connector: SMA; plug; straight; 50Ω; RG174,RG316; soldering
RoHS : Compliant | | 2
|
548
| Keystone Electronics Corp | Holder; aluminium; black; H: 50.8mm; W: 15.88mm; handle | 100 : $17.99
50 : $20.42
1 : $22.97
|
| 0
 |
095-900-548-006
| Amphenol RF | Cable; 0.153m; MCX male,both sides; straight; 6" | 25 : $16.25
10 : $18.58
5 : $20.9
1 : $23.22
|
| 0
|
10025482
| Fischer Elektronik GmbH & Co KG | Connector: pin strips; socket; female; PIN: 34; THT; 3A; 125V; BL 1 | 100 : $2.34
10 : $2.66
1 : $3.01
|
| 0
|
10027548
| Fischer Elektronik GmbH & Co KG | Connector: pin strips; socket; female; PIN: 48; THT; 1.5A; 125V; 2x24 | 20 : $10.63
5 : $12.15
1 : $13.67
|
| 0
|
10054809
| Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 14; THR,THT; 3A; 250V | 200 : $1.42
50 : $1.62
20 : $1.82
1 : $2.03
|
| 0
|
10054813
| Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 16; THR,THT; 3A; 250V | 200 : $0.92
50 : $1.06
20 : $1.18
1 : $1.3
|
| 0
|
10054854
| Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 42; THR,THT; 3A; 250V | 50 : $4.27
20 : $4.9
5 : $5.48
1 : $6.09
|
| 0
|
10054895
| Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 68; THR,THT; 3A; 250V | 50 : $6.89
20 : $7.88
5 : $8.86
1 : $9.84
|
| 0
|
10354810
| Essentra Components | Washer; round; h=1mm; D=11mm; polyamide; natural | 1,000 : $0.0522
500 : $0.0587
100 : $0.0652
20 : $0.0815
|
| 0
|
10356548
| Essentra Components | Washer; round; h=1.6mm; D=15.9mm; polyamide; natural | 1,000 : $0.067
500 : $0.075
100 : $0.083
10 : $0.104
|
| 0
|
1105485
| Bossard Group | Lifting eye bolt; M10; M10x40; Head: eye; steel; zinc; DIN 444A | 500 : $1.11
250 : $1.26
50 : $1.38
|
| 0
|
1123548
| Lapp Group | Wire; ÖLFLEX® CLASSIC 128 H BK 0,6/1 kV; 4G6mm2; unshielded
RoHS : Compliant | 100 : $8.94
50 : $10.21
25 : $11.49
10 : $12.76
1 : $14.04
|
| 0
|
Richardson RFPD | RACM65-48S-ST
 | RECOM Power GmbH | AC/DC Power Supply Single-OUT 48V 1.36A 65W 6-Pin
RoHS : Compliant | | 0
|
RP15-483.3SFW/N-HC
| RECOM Power GmbH | Module DC-DC 48VIN 1-OUT 3.3V 4.5A 15W 5-Pin Tray
RoHS : Compliant | | 0
|
154806-E
| TE Connectivity | Conn Socket Strip F 26 POS 1.27mm Solder ST Top En
RoHS : Compliant | | 0
|
54-874-013
| Spectrum Control | Feed Through Capacitor
RoHS : Not Compliant | | 0
|
REC15-485.1S/H3/M
| RECOM Power GmbH | Module DC-DC 48VIN 1-OUT 5.1V 3A 15W 5-Pin Metal D
RoHS : Compliant | | 0
|
REC5-4805DRWZ/H6/C/SMD
| RECOM Power GmbH | Module DC-DC 48VIN 2-OUT 5V/-5V 0.5A/-0.5A 5W Medi
RoHS : Compliant | | 0
|
REC5-4805SRW/H2/A/M/SMD/CTRL-R
| RECOM Power GmbH | Module DC-DC 48VIN 1-OUT 5V 1A 5W Medical 18-Pin M
RoHS : Compliant | | 0
|
REC5-4805SRW/H2/C/SMD-R
| RECOM Power GmbH | Module DC-DC 48VIN 1-OUT 5V 1A 5W Medical 18-Pin S
RoHS : Compliant | | 0
|
REC5-4805SRW/H4/A/M
| RECOM Power GmbH | Module DC-DC 48VIN 1-OUT 5V 1A 5W Medical 8-Pin DI
RoHS : Compliant | | 0
|
REC5-4805SRWZ/H/B/SMD
| RECOM Power GmbH | Module DC-DC 48VIN 1-OUT 5V 1A 5W Medical 18-Pin P
RoHS : Compliant | | 0
|
REC5-4809DRW/H2/C/SMD
| RECOM Power GmbH | Module DC-DC 48VIN 2-OUT -9V/9V -0.278A/0.278A 5W
RoHS : Compliant | | 0
|
REC5-4809SRW/H4/A/SMD-R
| RECOM Power GmbH | Module DC-DC 48VIN 1-OUT 9V 0.556A 5W Medical 17-P
RoHS : Compliant | | 0
|
REC5-4809SRW/H6/A/M
| RECOM Power GmbH | Module DC-DC 48VIN 1-OUT 9V 0.556A 5W Medical 8-Pi
RoHS : Compliant | | 0
|
REC5-4809SRW/H6/A/M/CTRL
| RECOM Power GmbH | Module DC-DC 48VIN 1-OUT 9V 0.556A 5W Medical 9-Pi
RoHS : Compliant | | 0
|
REC5-4812SRW/H4/A/M/CTRL
| RECOM Power GmbH | Module DC-DC 48VIN 1-OUT 12V 0.42A 5W Medical 9-Pi
RoHS : Compliant | | 0
|
Rutronik | 548190572
| Molex | Mini-USB Type-B OTG R/A THT
RoHS : Compliant | 800 : $0.7921
1,600 : $0.7777
2,400 : $0.7705
3,200 : $0.7489
|
| 22,400
|
P/N3548
| Keystone Electronics Corp | FEMALE QUICK FIT VERTICAL.187X0
RoHS : Compliant | 100 : $0.2163
200 : $0.2055
300 : $0.2037
500 : $0.2019
800 : $0.1928
|
| 700
|
PJQ4548P-AU_R2_002A1
| PanJit Touch Screens | N-CH 40V 43A 9,1mOhm DFN3333-8L
RoHS : Compliant | | 100
|
PJQ4548VP-AU_R2_002A1
| PanJit Touch Screens | N-CH 40V 40A 10,4mOhm DFN3333-8L
RoHS : Compliant | | 100
|
PJQ5548-AU_R2_002A1
| PanJit Touch Screens | N-CH 40V 48A 12,1mOhm DFN5060-8L
RoHS : Compliant | | 100
|
PJQ5548V-AU_R2_002A1
| PanJit Touch Screens | N-CH 40V 45A 12,4mOhm DFN5060-8L
RoHS : Compliant | | 100
|
CYPM1115-48LQXI
| Infineon Technologies AG | EZ-PD High-Voltage MCU USB-C PD
RoHS : Compliant | | 20
|
RJCSE548001
| Amphenol Communications Solutions | RJ45 Modular_Jack 1Port 8P/8C
RoHS : Compliant | 150 : $1.53
300 : $1.48
450 : $1.45
600 : $1.4
750 : $1.35
|
| 5
|
Braemac Americas-Symmetry | CHB75-48S15
| Cincon Electronics Corporation | Isolated DC/DC Converters
RoHS : Compliant | | 0
|
CM6548
| C-Media Electronics Inc | CM6542 for IPC, NB, PC | | 0
|
MSH302548AH-50.000MHZ-T3
| Abracon Corporation | 4 Pad Ceramic Package, 3.2 mm x 2.5 mm
RoHS : Compliant | | 0
|
MSH302548AH-8.000MHZ-T3
| Abracon Corporation | 4 Pad Ceramic Package, 3.2 mm x 2.5 mm | | 0
|
CHB75-48S12N
| Cincon Electronics Corporation | Isolated DC/DC Converters
RoHS : Compliant | | 0
|
MXH202548AH-25.000MHZ-T
 | Abracon Corporation | 4 Pad Ceramic Package, 2.5mm x 2.0 mm
RoHS : Compliant | | 0
|
AMEM5-48SEZ
| Aimtec |
RoHS : Compliant | | 0
|
MIH302548AH-50.000MHZ-T
 | Abracon Corporation | Oscillator, Ceramic, HCMOS, 50.000MHZ, 25ppm -40+85C, 3.3 Vdc, 5 x 7mm
RoHS : Compliant | | 0
|
AMED15-48SGY
| Aimtec |
RoHS : Compliant | | 0
|
MIH302548AH-16.000MHZ-T
| Abracon Corporation | Oscillator, Ceramic, HCMOS, 16.000MHZ, 25ppm -40+85C, 3.3 Vdc, 5 x 7mm
RoHS : Compliant | | 0
|
MSH302548AH-20.000MHZ-T3
| Abracon Corporation | 4 Pad Ceramic Package, 3.2 mm x 2.5 mm | | 0
|
CHB75-48S24N
| Cincon Electronics Corporation | Isolated DC/DC Converters
RoHS : Compliant | | 0
|
MIH302548AH-25.000MHZ-T
| Abracon Corporation | Oscillator, Ceramic, HCMOS, 25.000MHZ, 25ppm -40+85C, 3.3 Vdc, 5 x 7mm
RoHS : Compliant | | 0
|
CHB75-48S33
| Cincon Electronics Corporation | Isolated DC/DC Converters
RoHS : Compliant | | 0
|
CHB75-48S12
| Cincon Electronics Corporation | Isolated DC/DC Converters
RoHS : Compliant | | 0
|
Chip-Germany GmbH | PSA065-480M-R
| Phihong USA | | | 199
|
PSA065-480-R
| Phihong USA | | | 80
|
PSA65-480M
| Phihong USA | | | 42
|
OPA548T
| Burr-Brown Corp |
RoHS : Not Compliant | | 37
|
DB Roberts | MS35489-98
| Military Specifications | | 1 : $1.5352
100 : $1.0788
133 : $1.0788
|
| 133
|
548
| HeliCoil | KIT TOOL 78-18 SPPL | | 0
|
248548
| Essentra Components | INSULATOR,BLUE | | 0
|
2548
| Heyco | FSD 39-32-06 BLACK | | 0
|
4548-632-N
| RAF Electronic Hardware | | | 0
|
4654-832-SS
| RAF Electronic Hardware | STANDOFF | | 0
|
4548-440-SS
| RAF Electronic Hardware | | | 0
|
4548-832-AL
| RAF Electronic Hardware | | | 0
|
4554-832-N
| RAF Electronic Hardware | | | 0
|
M1548-B-3005-B
| RAF Electronic Hardware | | | 0
|
85-15-480-16
| Southco | The simplicity of a quarter turn is all it takes to secure panels quickly and easily with these versatile little fasteners. Numerous head styles stud lengths receptacle styles and accessories provide flexibility for accommodating many specific mountin | | 0
|
4554-832-AL
| RAF Electronic Hardware | | | 0
|
47-80-548-50
| Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | | 0
|
D5-PF35-48RBNA
| Southco | D5-PF35-48RBNA | | 0
|
2254-832-N
| RAF Electronic Hardware | HEX FEMALE STANDOFF 3/8 HEX X 1-1/2 LENGTH NO PLATE | | 0
|
ECCO | 97-3054-8
| Amphenol Industrial Operations | | | 1
|
97-3054-8
| Amphenol Industrial Operations | | | 1
|
Pasternack Enterprises US | PE3C10355-48
| Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400-FR, RF Cable Type: TCOM-400-FR, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Fire Rated 4.3-10 Male to 4.3-10 Male Low PIM Cable 48 Inch Length Using TCOM-400-FR Coax With Times Microwave Components., Radio frequency assembly fire rated 4.3-10 male to 4.3-10 male low PIM cable 48 inch length using TCOM-400-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The fire rated 4.3-10 male to 4.3-10 male low PIM cable 48 inch length using TCOM-400-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 4.3-10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a 4.3-10 cable connection on the other. Our low PIM a 4.3-10 to a 4.3-10 cable assembly has male gender on end 1 and male on end 2. PE3C10355-48 can also be known as a low PIM 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10355-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. 4.3-10 plug to 4.3-10 plug cable assembly PE3C10355-48 is built with TCOM-400-FR which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low PIM RF cable assembly as per your requirements. | 1 : $197.99
25 : $190.07
50 : $184.13
100 : $180.17
|
| 2
|
PE3175-48
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Female to SMB Plug Cable 48 Inch Length Using RG174 Coax., Radio frequency assembly SMA female to SMB plug cable 48 inch length using RG174 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female to SMB plug cable 48 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMB cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMB cable connection on the other. Our SMA to SMB cable assembly has female gender on end 1 and plug on end 2. PE3175-48 can also be known as a SMA jack to SMB male cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PE dielectric type. SMA jack to SMB male cable assembly PE3175-48 is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMB cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3175-48 RF cable are available on our downloadable PDF datasheet.PE3175-48 can also be used in the other direction and will be SMB plug to SMA female cable assembly if the opposite connectivity is required. SMA jack to SMB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. | 1 : $85.99
25 : $81.69
50 : $77.39
100 : $73.95
|
| 0
|
PE39548
| Pasternack Enterprises | | | 0
|
PE3995-48
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401AL-STRAIGHT, RF Cable Type: PE-SR401AL-STRAIGHT, RF Cable Impedance: 50 Ohm, Length: 48 inches. N Male to N Male Cable 48 Inch Length Using PE-SR401AL Coax., Radio frequency assembly N male to N male cable 48 inch length using PE-SR401AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male cable 48 inch length using PE-SR401AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and N type cable connection on the other. Our type N to type N cable assemblies have a male gender on end 1 and male on end 2. This type N to N type cable is a male to male coax assembly, PE3995-48, can also be known as a type N plug to N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3995-48 is built with PE-SR401AL-STRAIGHT which is a semi-rigid coax type. The Pasternack semi-rigid N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male cable 48 inch length using PE-SR401AL coax. | 1 : $239.99
25 : $227.99
50 : $215.99
|
| 0
|
PE3C1425-48
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male Right Angle to SMA Male Right Angle Low Loss Cable 48 Inch Length Using PE-P142LL Coax, RoHS., Radio frequency assembly SMA male right angle to SMA male right angle low loss cable 48 inch length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male right angle to SMA male right angle low loss cable 48 inch length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3C1425-48, can also be known as a low loss right angle SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C1425-48 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency SMA right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male right angle low loss cable 48 inch length using PE-P142LL coax, RoHS. | 1 : $515.0
25 : $489.25
50 : $463.5
|
| 0
|
PE3C1548/HS-48
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male to N Male Low Loss Cable 48 Inch Length Using LMR-600-DB Coax with HeatShrink., Radio frequency assembly N male to N male low loss cable 48 inch length using LMR-600-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 48 inch length using LMR-600-DB coax with heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C1548/HS-48 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3C1548/HS-48 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 48 inch length using LMR-600-DB coax with heatshrink. | 1 : $195.99
25 : $186.19
50 : $176.39
100 : $168.55
|
| 0
|
PE3C1548LF/HS-240
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 240 inches. N Male to N Male Low Loss Cable 240 Inch Length Using LMR-600-DB Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N male low loss cable 240 inch length using LMR-600-DB coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 240 inch length using LMR-600-DB coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and N type cable connection on the other. Our low loss type N to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C1548LF/HS-240 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3C1548LF/HS-240 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 240 inch length using LMR-600-DB coax with heatshrink, LF solder. | 1 : $253.99
25 : $241.29
50 : $228.59
100 : $218.43
|
| 0
|
PE3C3045-48
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Female to Water Blue FAKRA Jack Low Loss Cable 48 Inch Length Using LMR-100 Coax., Radio frequency assembly SMA female to water blue FAKRA jack low loss cable 48 inch length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female to water blue FAKRA jack low loss cable 48 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and FAKRA cable connection on the other. Our low loss SMA to FAKRA cable assemblies have a female gender on end 1 and jack on end 2. PE3C3045-48 can also be known as a low loss SMA jack to FAKRA female cable assembly and will be shipped same-day as it is purchased. SMA jack to FAKRA female cable assembly PE3C3045-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to FAKRA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA female to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3045-48 can also be used in the other direction and will be FAKRA jack to SMA female cable assembly if the opposite connectivity is required. Low loss SMA jack to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to FAKRA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to water blue FAKRA jack low loss cable 48 inch length using LMR-100 coax. | 1 : $67.99
25 : $64.59
50 : $61.19
100 : $58.47
|
| 0
|
PE3W11835-48
| Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. 1.0/2.3 Plug to N Male Right Angle Cable 48 Inch Length Using RG316 Coax., Radio frequency assembly 1.0/2.3 plug to N male right angle cable 48 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.0/2.3 plug to N male right angle cable 48 inch length using RG316 coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.0/2.3 cable connection on one end and right angle type N cable connection on the other. Our 1.0/2.3 to right angle N type cable assemblies have a plug gender on end 1 and male on end 2. PE3W11835-48 can also be known as a 1.0/2.3 male to right angle type N plug cable assembly and will be shipped same-day as it is purchased. 1.0/2.3 male to type N plug cable assembly PE3W11835-48 is built with RG316 which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to right angle N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency 1.0/2.3 plug to N type right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11835-48 can also be used in the other direction and will be right angle type N male to 1.0/2.3 plug cable assembly if the opposite connectivity is required. 1.0/2.3 male to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to type N cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.0/2.3 plug to N male right angle cable 48 inch length using RG316 coax. | 1 : $137.99
25 : $131.09
50 : $124.19
100 : $118.67
|
| 0
|
PE3W15548
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to Reverse Polarity SMA Female Bulkhead Cable Using LMR-100 Coax. PE3W15548 is a SMA male right angle to reverse polarity SMA female bulkhead cable using LMR-100A coax. This Pasternack SMA male right angle to reverse polarity SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to reverse polarity female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15548 SMA male right angle to SMA reverse polarity female bulkhead cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | | 0
|
PE3C7875-48
| Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 48 inches. Snap-On QMA Male Right Angle to QMA Female Low PIM Cable 48 Inch Length Using 1/4 inch Superflexible Coax., Radio frequency assembly snap-on QMA male right angle to QMA female low PIM cable 48 inch length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on QMA male right angle to QMA female low PIM cable 48 inch length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QMA to QMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle QMA cable connection on one end and QMA cable connection on the other. Our low PIM right angle QMA to QMA cable assemblies have a male gender on end 1 and female on end 2. This QMA to QMA cable is a male to female coax assembly, PE3C7875-48, can also be known as a low PIM right angle QMA plug to QMA jack cable assembly and will be shipped same-day as it is purchased. QMA plug to QMA jack cable assembly PE3C7875-48 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated QMA cable assembly is manufactured with right angle QMA to QMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM QMA right angle male to QMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7875-48 can also be used in the other direction and will be QMA female to right angle QMA male cable assembly if the opposite connectivity is required. Low PIM QMA right angle plug to QMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QMA to QMA cable assembly for quick shipment worldwide. Variations of QMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on QMA male right angle to QMA female low PIM cable 48 inch length using 1/4 inch superflexible coax. | 1 : $107.99
25 : $102.59
50 : $97.19
100 : $92.87
|
| 0
|
PE3W02685-48
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to SMA Male Low Loss Cable 48 Inch Length Using LMR-100 Coax., Radio frequency assembly SMA male to SMA male low loss cable 48 inch length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male low loss cable 48 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W02685-48 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W02685-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male low loss cable 48 inch length using LMR-100 coax. | 1 : $65.99
25 : $62.69
50 : $59.39
100 : $56.75
|
| 0
|
PE3W03495-48
| Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Clamped TNC Male to TNC Male Low Loss Cable 48 Inch Length Using LMR-400 Coax., Radio frequency assembly clamped TNC male to TNC male low loss cable 48 inch length using LMR-400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Clamped TNC male to TNC male low loss cable 48 inch length using LMR-400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our low loss TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W03495-48 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3W03495-48 is built with LMR-400 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this clamped TNC male to TNC male low loss cable 48 inch length using LMR-400 coax. | 1 : $127.99
25 : $121.59
50 : $115.19
100 : $110.07
|
| 0
|
PE3W05485-18
| Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 2.92mm Male to 1.85mm Male Cable 18 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly 2.92mm male to 1.85mm male cable 18 inch length using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to 1.85mm male cable 18 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to 1.85mm cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 2.92mm cable connection on one end and 1.85mm cable connection on the other. Our 2.92mm to 1.85mm cable assembly has male gender on end 1 and male on end 2. PE3W05485-18 can also be known as a 2.92mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. 2.92mm plug to 1.85mm plug cable assembly PE3W05485-18 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to 1.85mm cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has solder attachment method and stainless steel body with gold over nickel plating.Additional dimensions, specifications and CAD drawings for this PE3W05485-18 RF cable are available on our downloadable PDF datasheet.PE3W05485-18 can also be used in the other direction and will be 1.85mm male to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm RF cable assembly as per your requirements. | 1 : $349.99
25 : $332.49
50 : $314.99
100 : $300.99
|
| 0
|
PE3W06425-48
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male Right Angle to SMA Male Cable 48 Inch Length Using RG316 Coax., Radio frequency assembly SMA male right angle to SMA male cable 48 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA male cable 48 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3W06425-48, can also be known as a right angle SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W06425-48 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA right angle male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06425-48 can also be used in the other direction and will be SMA male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male cable 48 inch length using RG316 coax. | 1 : $81.99
25 : $77.89
50 : $73.79
100 : $70.51
|
| 0
|
Spanish ▼ 
English
Chinese
German
Japanese
Russian
Korean
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand