| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
5021G-AF5-R Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
![]() Braemac Americas-Symmetry | FWR835021-SM-RA | embedded antenna design (ead) | WR868 Stub antenna with SMA-Male RA connector |
| 1 | |
| FWR835021-RS-RA | embedded antenna design (ead) | WR868 Stub antenna with RP-SMA RA connector |
| 1 | ||
AEACCA115021-S850![]() | Abracon Corporation | RF ANT 1.71GHZ FLT BAR SMA FAKRA RoHS : Compliant |
| 0 | ||
AEACCA115021-S698![]() | Abracon Corporation | Cellular 4G/LTE/3G/2G/GSM Antennas RoHS : Compliant |
| 0 | ||
| UCLAMP5021ZATFT | Semtech Corporation |
| 0 | |||
![]() Chip-Germany GmbH | 43045-0212 | Molex | RoHS : Compliant | 102 | ||
| 3502111 | TE Connectivity | 69 | ||||
![]() Component Electronics, Inc | 0502128000 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 14,000 | |
| 267M3502105KR | Matsuo Electric Co Ltd | IN STOCK SHIP TODAY RoHS : Compliant | 400 | |||
| 16MMCX-50-2-1/111OH | HUBER+SUHNER | IN STOCK SHIP TODAY |
| 300 | ||
| 16MMCX-50-2-1/111OE | HUBER+SUHNER | IN STOCK SHIP TODAY |
| 177 | ||
| 16MCX-50-2-104/111NH | HUBER+SUHNER | IN STOCK SHIP TODAY RoHS : Unknown |
| 160 | ||
| 171-050-213R011 | NorComp | IN STOCK SHIP TODAY RoHS : Compliant |
| 100 | ||
| BAP65-02-115 | NXP Semiconductors | IN STOCK SHIP TODAY |
| 90 | ||
| 19502-1004 | Molex | IN STOCK SHIP TODAY | 50 | |||
| PS2502-1 | NEC Electronics Group | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 15 | ||
| A80502100-SX970 | Intel Corporation | IN STOCK SHIP TODAY |
| 13 | ||
| SSC0502150YZF | SWS | IN STOCK SHIP TODAY | 10 | |||
| A80502100-SX963 | Intel Corporation | IN STOCK SHIP TODAY |
| 9 | ||
| DMC-50218 | Optrex America Inc | IN STOCK SHIP TODAY |
| 6 | ||
| 25SMA-50-2-15/111 | HUBER+SUHNER | IN STOCK SHIP TODAY |
| 6 | ||
| MTSW-150-21-S-S-1125 | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 4 | ||
![]() DB Roberts | 97-50-210-12 | Southco | Lever-actuated operation creates over-center action and the simple attractive design of this latch incorporates natural tension right into the curved latch-spring mechanism to prevent accidental opening. |
| 30 | |
| 5021 | Heyco | 5021-00 TRANS BLADE BULK | 0 | |||
| 13RS025021 | Essentra Components | ROUND SPACER, .125 ID, .250 OD | 0 | |||
| 07535-02103 | Avdel | TOOL LOCATION RELEASE PIN | 0 | |||
| RS-5021-1000 | Heyco | RS 0500 OD X219 IDX1000 LG NAT | 0 | |||
| R4-10-30-502-10 | Southco | R4-10-30-502-10 | 0 | |||
| 8502160901VR | Essentra Components | SNAP FASTNR D30FEM.6L12 BLK | 0 | |||
| AC-EM-100-5021-1 | Southco | AC-EM-100-5021-1 | 0 | |||
| OFP150-2-1/2A | Essentra Components | OLSON FLANGE PROTECTORS 150 HD | 0 | |||
| E5-1-115-021 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| E5-2-085-021 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| R4-10-11-502-10 | Southco | 0 | ||||
| 09215-02155 | Avdel | INSERTO NUTSERT M8 UPX 55 ACC | 0 | |||
| 1450210 | Essentra Components | 0 | ||||
| A1-11-502-10 | Southco | 0 | ||||
![]() EBV Elektronik | C15021_STRADA-2X2-SCL![]() | LEDIL | Lens for Bridgelux SMD 5050XD16XBH LEDs PMMA Clear 508mm x 50mm x 773mm (Alt: C15021_STRADA-2X2-SCL) RoHS : Compliant | 75,520 | ||
| ATA5021-GAQW | Microchip Technology Inc | Timer IC Digital Window Watchdog 1 45 V to 55 V 8 Pins SOIC (Alt: ATA5021-GAQW) RoHS : Compliant | 8,000 | |||
| 50-215UMC/404401B/TR8-T/EU | Everlight Electronics Co Ltd | LED Chip White x033y0339 30mA 2Pin SMD TR (Alt: S10C012287) RoHS : Compliant | 4,000 | |||
| MIC5021YM | Microchip Technology Inc | MOSFET Driver 12V36V supply 6 mA output SOIC8 (Alt: MIC5021YM) RoHS : Compliant | 0 | |||
| MIC5021YM-TR | Microchip Technology Inc | HIGH SPEED HIGH SIDE MOSFET DRIVER (Alt: MIC5021YM-TR) RoHS : Compliant | 0 | |||
| B50210B0IMLG | Broadcom Limited | (Alt: B50210B0IMLG) RoHS : Compliant | 0 | |||
| P5021NSE1QMB | NXP Semiconductors | MPU Components (Alt: P5021NSE1QMB) RoHS : Compliant | 0 | |||
| B50210B0KMLG | Broadcom Limited | SINGEPORT RSGMII DUAL MEDIA GPHY (Alt: B50210B0KMLG) RoHS : Compliant | 0 | |||
| AEDR-8502-100 | Broadcom Limited | (Alt: AEDR-8502-100) RoHS : Compliant | 0 | |||
| B50210SB0KMLG | Broadcom Limited | SINGEPORT RSGMII DUAL MEDIA (Alt: B50210SB0KMLG) RoHS : Compliant | 0 | |||
| B50212EB1IMLG | Broadcom Limited | Communication ICs (Alt: B50212EB1IMLG) RoHS : Compliant | 0 | |||
| B50212EB1KMLG | Broadcom Limited | 50212 CHILD PN (Alt: B50212EB1KMLG) RoHS : Compliant | 0 | |||
| B50213PEB1IMLG | Broadcom Limited | (Alt: B50213PEB1IMLG) RoHS : Compliant | 0 | |||
| MIC5502-1.8YMT-T5 | Microchip Technology Inc | (Alt: MIC5502-1.8YMT-T5) RoHS : Compliant | 0 | |||
| 50-215/GBC-YV1W2E/2G | Everlight Electronics Co Ltd | Low Power LEDs none SSL (Alt: S10C001640) RoHS : Compliant | 0 | |||
![]() FDH Electronics | M55021-E22SC9-2U00 | Whitmore/Wirenetics | Multi-Cond Cbl |
| 2,054 | |
| M55021-E26SC9-0U00 | Amphenol Cable & Interconnect Technologies | Multi-Cond Cbl |
| 795 | ||
| M10-538750-21H | Amphenol Aerospace | Connector Acc |
| 231 | ||
| J599EMD5021A13 | SOURIAU-SUNBANK | Circular Conn |
| 92 | ||
| 710-0215-021 | Array Connector Corporation | Connector 5015 |
| 91 | ||
| BL6502-12-12PN-RR1-M146 | Sealtron Inc | Circular Conn | 22 | |||
| BL8502-14T-7PN-SP-M136 | Sealtron Inc | Hermetic Conn | 5 | |||
| 77049-01100150-21 | Honeywell Sensing and Control | Switches |
| 0 | ||
| 350502-1 | TE Connectivity | Harness Mgmt RoHS : Compliant |
| 0 | ||
| 83412-00000150-21 | Honeywell Sensing and Control | Switches |
| 0 | ||
| 5021-00027 | Amphenol SV Microwave | Connector RoHS : Compliant |
| 0 | ||
| M83536/5-021M | TE Connectivity | Relays RoHS : Not Compliant | 0 | |||
| M83536/5-021M | Leach International Corporation | Relays | 0 | |||
| M83536/5-021M | DRI Relays Inc | Relays & Cont |
| 0 | ||
| J599EMI5021A35 | SOURIAU-SUNBANK | Connector 38999 |
| 0 | ||
![]() Maritex | 350218-3 | TE Connectivity | Rectangular Connector Contacts; 350218-3; TE CONNECTIVITY; Tin; Crimp; 14 AWG; 20 AWG RoHS : Compliant |
| 74,900 | |
| 350218-7 | TE Connectivity | Rectangular Connector Contacts; 350218-7; TE CONNECTIVITY; Gold, Nickel; 14 AWG; Crimp; 20 AWG RoHS : Compliant |
| 32,289 | ||
| 502178000 | Molex | Rectangular Connector Contacts; 502178000; MOLEX; Tin; Crimp; Cable; Connector, PCB, Signal |
| 23,694 | ||
| 502128100 | Molex | Rectangular Connector Contacts; 502128100; MOLEX; Tin; Crimp; Cable, Through Hole; Connector, PCB, Signal |
| 16,506 | ||
| 350218-2 | TE Connectivity | Rectangular Connector Contacts; 350218-2; TE CONNECTIVITY; Gold; Crimp; 14 AWG; 20 AWG RoHS : Compliant |
| 13,584 | ||
| 430450212 | Molex | Board Stacking Connectors; 430450212; MOLEX; 2; 5 A; Tin; 7.15 mm |
| 10,940 | ||
| 436450210 | Molex | Rectangular Connector Housings; 436450210; MOLEX; 1; 2; Yes RoHS : Compliant |
| 10,743 | ||
| 350218-1 | TE Connectivity | Rectangular Connector Contacts; 350218-1; TE CONNECTIVITY; Tin; Crimp; 14 AWG; 20 AWG RoHS : Compliant |
| 10,500 | ||
| RM85-5021-25-1012 | RELPOL | Electromagnetic relay; contact rating current 16A; coil voltage 12VDC; make contact (1Z); coil power 400-480mW; 16A/24VDC; 16A/250VAC |
| 1,972 | ||
LM5021MMX-1/NOPB![]() | Texas Instruments | AC DC Converters; LM5021MMX-1/NOPB; TEXAS INSTRUMENTS; 8; VSSOP; Surface Mount; Flyback RoHS : Compliant |
| 1,865 | ||
| RM85-5021-25-1024 | RELPOL | Electromagnetic relay; contact rating current 16A; coil voltage 24VDC; make contact (1Z); moc cewki 480mW; 16A/24VDC; 16A/250VAC |
| 1,311 | ||
C15021_STRADA-2X2-SCL![]() | LEDIL | Lens C15021_STRADA-2X2-SCL, asymmetric, for LED High Power CREE XB-H; XHP35 HI; XM-L2; XP-G2; XP-L; XP-L HI; XT-E, Ledil RoHS : Compliant |
| 1,280 | ||
| NTS-450-212EU | Mean Well | Converter DC/AC; 450W; 12V; 240VAC; 10-16.5VDC RoHS : Compliant |
| 110 | ||
| NTS-750-212EU | Mean Well | Converter DC/AC; 750W; 12V; 230VAC; 10-16.5VDC RoHS : Compliant |
| 6 | ||
| 9D.01.5.175.0210 | FINDER SpA | Din rail terminal block; distribution block; single-pole; 2x70mm2/ 10x16mm2; 1000 VAC/1500 VDC; 175A |
| 5 | ||
![]() Pasternack Enterprises US | PE35021-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C400, RF Cable Type: PE-C400, RF Cable Impedance: 50 Ohm, Length: 36 inches. UHF Male to UHF Male Cable 36 Inch Length Using PE-C400 Coax., Radio frequency assembly UHF male to UHF male cable 36 inch length using PE-C400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. UHF male to UHF male cable 36 inch length using PE-C400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom UHF to UHF cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with UHF cable connection on one end and UHF cable connection on the other. Our low loss UHF to UHF cable assemblies have a male gender on end 1 and male on end 2. This UHF to UHF cable is a male to male coax assembly, PE35021-36, can also be known as a low loss UHF plug to UHF plug cable assembly and will be shipped same-day as it is purchased. UHF plug to UHF plug cable assembly PE35021-36 is built with PE-C400 which is a flexible coax type. The Pasternack flexible UHF cable assembly is manufactured with UHF to UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this UHF male to UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss UHF plug to UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality UHF to UHF cable assembly for quick shipment worldwide. Variations of UHF cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this UHF male to UHF male cable 36 inch length using PE-C400 coax. |
| 302 | |
| PE35021-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C400, RF Cable Type: PE-C400, RF Cable Impedance: 50 Ohm, Length: 24 inches. UHF Male to UHF Male Cable 24 Inch Length Using PE-C400 Coax., Radio frequency assembly UHF male to UHF male cable 24 inch length using PE-C400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. UHF male to UHF male cable 24 inch length using PE-C400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom UHF to UHF cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with UHF cable connection on one end and UHF cable connection on the other. Our low loss UHF to UHF cable assemblies have a male gender on end 1 and male on end 2. This UHF to UHF cable is a male to male coax assembly, PE35021-24, can also be known as a low loss UHF plug to UHF plug cable assembly and will be shipped same-day as it is purchased. UHF plug to UHF plug cable assembly PE35021-24 is built with PE-C400 which is a flexible coax type. The Pasternack flexible UHF cable assembly is manufactured with UHF to UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this UHF male to UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss UHF plug to UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality UHF to UHF cable assembly for quick shipment worldwide. Variations of UHF cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this UHF male to UHF male cable 24 inch length using PE-C400 coax. |
| 302 | ||
| PE3C6502-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-375, RF Cable Type: SPO-375, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. Outdoor Rated 7/16 DIN Male to 7/16 DIN Male Low PIM Cable 100 cm Length Using SPO-375 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 7/16 DIN male to 7/16 DIN male low PIM cable 100 cm length using SPO-375 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN male to 7/16 DIN male low PIM cable 100 cm length using SPO-375 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP375-716M-LP 7/16 DIN to TC-SPP375-716M-LP 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP375-716M-LP 7/16 DIN cable connection on one end and TC-SPP375-716M-LP 7/16 DIN cable connection on the other. Our low PIM TC-SPP375-716M-LP 7/16 DIN to TC-SPP375-716M-LP 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This TC-SPP375-716M-LP 7/16 DIN to TC-SPP375-716M-LP 7/16 DIN cable is a male to male coax assembly, PE3C6502-100CM, can also be known as a low PIM TC-SPP375-716M-LP 7/16 DIN plug to TC-SPP375-716M-LP 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. TC-SPP375-716M-LP 7/16 DIN plug to TC-SPP375-716M-LP 7/16 DIN plug cable assembly PE3C6502-100CM is built with SPO-375 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP375-716M-LP 7/16 DIN cable assembly is manufactured with TC-SPP375-716M-LP 7/16 DIN to TC-SPP375-716M-LP 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency low PIM TC-SPP375-716M-LP 7/16 DIN male to TC-SPP375-716M-LP 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM TC-SPP375-716M-LP 7/16 DIN plug to TC-SPP375-716M-LP 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP375-716M-LP 7/16 DIN to TC-SPP375-716M-LP 7/16 DIN cable assembly for quick shipment worldwide. Variations of TC-SPP375-716M-LP 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN male to 7/16 DIN male low PIM cable 100 cm length using SPO-375 coax using Times Microwave parts. |
| 60 | ||
| PE3C6502-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-375, RF Cable Type: SPO-375, RF Cable Impedance: 50 Ohm, Length: 12 inches. Outdoor Rated 7/16 DIN Male to 7/16 DIN Male Low PIM Cable 12 Inch Length Using SPO-375 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 7/16 DIN male to 7/16 DIN male low PIM cable 12 inch length using SPO-375 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN male to 7/16 DIN male low PIM cable 12 inch length using SPO-375 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP375-716M-LP 7/16 DIN to TC-SPP375-716M-LP 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP375-716M-LP 7/16 DIN cable connection on one end and TC-SPP375-716M-LP 7/16 DIN cable connection on the other. Our low PIM TC-SPP375-716M-LP 7/16 DIN to TC-SPP375-716M-LP 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This TC-SPP375-716M-LP 7/16 DIN to TC-SPP375-716M-LP 7/16 DIN cable is a male to male coax assembly, PE3C6502-12, can also be known as a low PIM TC-SPP375-716M-LP 7/16 DIN plug to TC-SPP375-716M-LP 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. TC-SPP375-716M-LP 7/16 DIN plug to TC-SPP375-716M-LP 7/16 DIN plug cable assembly PE3C6502-12 is built with SPO-375 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP375-716M-LP 7/16 DIN cable assembly is manufactured with TC-SPP375-716M-LP 7/16 DIN to TC-SPP375-716M-LP 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency low PIM TC-SPP375-716M-LP 7/16 DIN male to TC-SPP375-716M-LP 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM TC-SPP375-716M-LP 7/16 DIN plug to TC-SPP375-716M-LP 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP375-716M-LP 7/16 DIN to TC-SPP375-716M-LP 7/16 DIN cable assembly for quick shipment worldwide. Variations of TC-SPP375-716M-LP 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN male to 7/16 DIN male low PIM cable 12 inch length using SPO-375 coax using Times Microwave parts. |
| 60 | ||
| PE3FCA502-10M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Connector 1 Series: FC, Connector 1 Polish Type: UPC, Connector 2 Series: FC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 300, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Duplex FC UPC, NK to FC UPC, NK, SM OS2, 2.0mm Plenum, Yellow-10M. Pasternack’s PE3FCA502-10M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long duplex cable assembly is equipped with FC/UPC narrow key to FC/UPC narrow key connectors. Our yellow fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, fiber optic test and measurement, medical and biomedical, military and defense, industrial automation and sensing and scientific research and high-precision optical systems. With the flexibility of custom lengths, the PE3FCA502-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. This PE3FCA502-10M fiber optic cable with a 2 mm cable diameter and 15 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of dual FC/UPC to dual FC/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 43 | ||
| PE3FCA502-1M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Connector 1 Series: FC, Connector 1 Polish Type: UPC, Connector 2 Series: FC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 300, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Duplex FC UPC, NK to FC UPC, NK, SM OS2, 2.0mm Plenum, Yellow-1M. Pasternack’s PE3FCA502-1M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 1-meter long duplex cable assembly is equipped with FC/UPC narrow key to FC/UPC narrow key connectors. Our yellow fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, fiber optic test and measurement, medical and biomedical, military and defense, industrial automation and sensing and scientific research and high-precision optical systems. With the flexibility of custom lengths, the PE3FCA502-1M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. This PE3FCA502-1M fiber optic cable with a 2 mm cable diameter and 15 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of dual FC/UPC to dual FC/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 43 | ||
| PE3C8502-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 59.05 inches. Outdoor Rated 7/16 DIN Male to N Female Low PIM Cable 150 CM Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 7/16 DIN male to N female low PIM cable 150 cm length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN male to N female low PIM cable 150 cm length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and N type cable connection on the other. Our low PIM 7/16 DIN to type N cable assemblies have a male gender on end 1 and female on end 2. This 7/16 DIN to type N cable is a male to female coax assembly, PE3C8502-150CM, can also be known as a low PIM 7/16 DIN plug to N type jack cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to type N jack cable assembly PE3C8502-150CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8502-150CM can also be used in the other direction and will be N type female to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to N type jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN male to N female low PIM cable 150 cm length using SPO-250 coax using Times Microwave parts. |
| 42 | ||
| PE3C8502-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. Outdoor Rated 7/16 DIN Male to N Female Low PIM Cable 100 CM Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 7/16 DIN male to N female low PIM cable 100 cm length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN male to N female low PIM cable 100 cm length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and type N cable connection on the other. Our low PIM 7/16 DIN to N type cable assemblies have a male gender on end 1 and female on end 2. This 7/16 DIN to type N cable is a male to female coax assembly, PE3C8502-100CM, can also be known as a low PIM 7/16 DIN plug to N type jack cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to type N jack cable assembly PE3C8502-100CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8502-100CM can also be used in the other direction and will be N type female to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN male to N female low PIM cable 100 cm length using SPO-250 coax using Times Microwave parts. |
| 42 | ||
| PE38502-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: UMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 12 inches. UMCX Plug to MCX Plug Right Angle Cable 12 Inch Length Using RG178 Coax., Radio frequency assembly UMCX plug to MCX plug right angle cable 12 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. UMCX plug to MCX plug right angle cable 12 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom UMCX to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle UMCX cable connection on one end and right angle MCX cable connection on the other. Our right angle UMCX to right angle MCX cable assemblies have a plug gender on end 1 and plug on end 2. This UMCX to MCX cable is a plug to plug coax assembly, PE38502-12, can also be known as a right angle UMCX male to right angle MCX male cable assembly and will be shipped same-day as it is purchased. UMCX male to MCX male cable assembly PE38502-12 is built with RG178 which is a flexible coax type. The Pasternack flexible UMCX cable assembly is manufactured with right angle UMCX to right angle MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this UMCX right angle plug to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE38502-12 can also be used in the other direction and will be right angle MCX plug to right angle UMCX plug cable assembly if the opposite connectivity is required. UMCX right angle male to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality UMCX to MCX cable assembly for quick shipment worldwide. Variations of UMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this UMCX plug to MCX plug right angle cable 12 inch length using RG178 coax. |
| 21 | ||
| PE82P5021 | Pasternack Enterprises | Key Specifications, Connector In Series: 2.92mm, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: 2.92mm, Connector Out Gender: Female, Maximum VSWR: 3.5:1, Maximum Insertion Loss: 16 dB, Maximum Power: 11 Watts. 6 Bit TTL Programmable Phase Shifter, 18 GHz to 26 GHz, 360 degree Phase Range, 11.25 degree Control Step Size, +20 dBm Max Pin, 2.92mm. Pasternack programmable phase shifter PE82P5021 is part of our large selection of in-stock RF, microwave and millimeter wave components available for purchase. This programmable phase shifter is manufactured with 2.92mm connectors and has a phase adjustment of 360 degrees. Our 2.92mm programmable phase shifter has a minimum frequency of 18 GHz and a maximum frequency of 26 GHz. 2.92mm coaxial RF programmable phase shifter has a maximum input power of 11 watts and a maximum VSWR of 3.5:1. PE82P5021 coaxial 2.92mm programmable phase shifter is one of over 40,000 RF components supplied by Pasternack. Our programmable phase shifter can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts. |
| 2 | ||
| PE34502-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-B100, RF Cable Type: PE-B100, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMC Plug to SMC Plug Right Angle Cable 12 Inch Length Using PE-B100 Coax., Radio frequency assembly SMC plug to SMC plug right angle cable 12 inch length using PE-B100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMC plug to SMC plug right angle cable 12 inch length using PE-B100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to SMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMC cable connection on one end and right angle SMC cable connection on the other. Our SMC to right angle SMC cable assemblies have a plug gender on end 1 and plug on end 2. This SMC to SMC cable is a plug to plug coax assembly, PE34502-12, can also be known as a SMC male to right angle SMC male cable assembly and will be shipped same-day as it is purchased. SMC male to SMC male cable assembly PE34502-12 is built with PE-B100 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with SMC to right angle SMC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMC plug to SMC right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34502-12 can also be used in the other direction and will be right angle SMC plug to SMC plug cable assembly if the opposite connectivity is required. SMC male to SMC right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to SMC cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug to SMC plug right angle cable 12 inch length using PE-B100 coax. |
| 0 | ||
| PE33502-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm, Length: 18 inches. SMA Female 4 Hole Flange to SMA Female 4 Hole Flange Cable 18 Inch Length Using RG402 Coax., Radio frequency assembly SMA female 4 hole flange to SMA female 4 hole flange cable 18 inch length using RG402 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female 4 hole flange to SMA female 4 hole flange cable 18 inch length using RG402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA 4 hole flange cable connection on one end and SMA 4 hole flange cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE33502-18, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE33502-18 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female 4 hole flange to SMA female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack 4 hole flange to SMA jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 4 hole flange to SMA female 4 hole flange cable 18 inch length using RG402 coax. |
| 0 | ||
| PE3W05021/BK/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 75 Ohm, Connector 2 Series: Mini SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm. 75 Ohm BNC Female Bulkhead to 75 Ohm Mini SMB Plug Cable Using 75 Ohm RG59 Coax with HeatShrink., Pasternack’s PE3W05021/BK/HS BNC female bulkhead to mini SMB plug RF cable assembly using RG59 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female to mini SMB plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to mini SMB cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC bulkhead cable connection on one end and a mini SMB cable connection on the other. Our BNC to mini SMB cable assembly has a female gender on end 1 and a plug on end 2. PE3W05021/BK/HS can also be known as a BNC jack to mini SMB male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper clad steel as the cable’s inner conducting material and PE dielectric type. Our PE3W05021/BK/HS RF cable has a pvc (nc) jacket of 0.242-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -25 to 70 degrees C. The flexible RF cable has a between series connection. This PE3W05021/BK/HS BNC jack to mini SMB male cable assembly is built with RG59, which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to mini SMB cable connectors, has a 75 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05021/BK/HS can also be used in the other direction and will be a mini SMB plug to BNC female bulkhead cable assembly if the opposite connectivity is required. This BNC jack bulkhead to mini SMB male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to mini SMB cable assembly for quick shipment worldwide. Variations of BNC and mini SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to mini SMB RF cable assembly as per your requirements. | 0 | |||
| PE3C5021 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Snap-On MMBX Plug Right Angle to SMB Jack Bulkhead Cable Using RG316 Coax., Radio frequency assembly snap-on MMBX plug right angle to SMB jack bulkhead cable using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on MMBX plug right angle to SMB jack bulkhead cable using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMBX to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MMBX cable connection on one end and SMB bulkhead cable connection on the other. Our right angle MMBX to SMB cable assemblies have a plug gender on end 1 and jack on end 2. This MMBX to SMB cable is a plug to jack coax assembly, PE3C5021, can also be known as a right angle MMBX male to SMB female cable assembly and will be shipped same-day as it is purchased. MMBX male to SMB female cable assembly PE3C5021 is built with RG316 which is a flexible coax type. The Pasternack flexible MMBX cable assembly is manufactured with right angle MMBX to SMB cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency MMBX right angle plug to SMB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5021 can also be used in the other direction and will be SMB jack bulkhead to right angle MMBX plug cable assembly if the opposite connectivity is required. MMBX right angle male to SMB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMBX to SMB cable assembly for quick shipment worldwide. Variations of MMBX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on MMBX plug right angle to SMB jack bulkhead cable using RG316 coax. | 0 | |||
| PE5021 | Pasternack Enterprises |
| 0 | |||
![]() Relay Specialties | TH465021000 | Johnson Electric Group | T-H CLEAR LENS (TH01-983C) |
| 190 | |
![]() TE Connectivity | 3502100RFT | TE Connectivity | 3502 100R 1% Resistance Value: 100 Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 1 % Package Size Code: 2010 Through-Hole Resistor | 100 Ω Thick Metal Film Power Resistor 1 % | TE Connectivity RoHS : Compliant |
| 16,982 | |
| 3502100RJT | TE Connectivity | 3502 100R 5% Resistance Value: 100 Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 5 % Package Size Code: 2010 Through-Hole Resistor | 100 Ω Thick Metal Film Power Resistor 5 % | TE Connectivity RoHS : Compliant |
| 8,162 | ||
| 2299502-1 | TE Connectivity | CPGI-WC-WG-GR-BULK Primary Product Color: Gray Splice Type: Closed End Splice Wire Size: 22 – 14 AWG Insulation Option: Fully Insulated Sealable: No Gray Closed End Splice 22 – 14 AWG Fully Insulated | TE Connectivity RoHS : Compliant |
| 7,354 | ||
| 350210-1 | TE Connectivity | 03P CMNL HDR ASSY PC NATL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 3 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 3 | Ampseal Header | TE Connectivity RoHS : Compliant |
| 6,787 | ||
| 350210MJT | TE Connectivity | 3502 10M 5% Resistance Value: 10M Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 5 % Package Size Code: 2010 Through-Hole Resistor | 10M Ω Thick Metal Film Power Resistor 5 % | TE Connectivity RoHS : Compliant |
| 6,628 | ||
| 350210MFT | TE Connectivity | 3502 10M 1% Resistance Value: 10M Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 1 % Package Size Code: 2010 Through-Hole Resistor | 10M Ω Thick Metal Film Power Resistor 1 % | TE Connectivity RoHS : Compliant |
| 3,932 | ||
| 350210KJT | TE Connectivity | 3502 10K 5% Resistance Value: 10K Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 5 % Package Size Code: 2010 Through-Hole Resistor | 10K Ω Thick Metal Film Power Resistor 5 % | TE Connectivity RoHS : Compliant |
| 2,199 | ||
| 350210KFT | TE Connectivity | 3502 10K 1% Resistance Value: 10K Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 1 % Package Size Code: 2010 Through-Hole Resistor | 10K Ω Thick Metal Film Power Resistor 1 % | TE Connectivity RoHS : Compliant |
| 996 | ||
| 350210RFT | TE Connectivity | 3502 10R 1% Resistance Value: 10 Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 1 % Package Size Code: 2010 Through-Hole Resistor | 10 Ω Thick Metal Film Power Resistor 1 % | TE Connectivity RoHS : Compliant |
| 756 | ||
| 3502100KJT | TE Connectivity | 3502 100K 5% Resistance Value: 100K Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 5 % Package Size Code: 2010 Through-Hole Resistor | 100K Ω Thick Metal Film Power Resistor 5 % | TE Connectivity RoHS : Compliant |
| 671 | ||
| 2486502-1 | TE Connectivity | SMA Jack RA 2-Hole Flange Extended Recep RF Interface: SMA RF Connector Style: Jack RF Connector Mated Outer Diameter (Approximate): .24 in RF Connector Mated Outer Diameter (Approximate): 6.24 mm Impedance: 50 Ω SMA Jack .24" 6.24 mm | TE Connectivity RoHS : Compliant |
| 500 | ||
| 204502-1 | TE Connectivity | RECEPT ASSY,26 POSN,AMPLIMITE Number of Positions: 26 Connector & Housing Type: Receptacle Connector System: Cable-to-Cable Connector Mounting Type: Panel Mount Connector Shell Size: 2 Ampseal Header | 26 Receptacle Cable-to-Cable Panel Mount | TE Connectivity RoHS : Compliant |
| 266 | ||
| 1-796502-1 | TE Connectivity | CPC PSTD RCPT,23-19,R/A LF Number of Positions: 19 Connector Product Type: Connector Assembly Operating Voltage: 250 VDC Connector System: Wire-to-Panel Wire-to-Board Sealable: No Ampseal Header | 19 Connector Assembly 250 VDC Wire-to-Panel | TE Connectivity RoHS : Compliant |
| 200 | ||
| 1SNG625021R0000 | TE Connectivity | EM-SGL-M25-MET-E Cable Gland Product Type: Cable Gland Cable Gland & Accessory Style: Standard Threaded Primary Product Material: Brass Clamping Diameter Range: 10 – 14 mm Primary Product Plating Material: Nickel Cable Gland Standard Threaded Brass 10 – 14 mm | TE Connectivity RoHS : Compliant |
| 36 | ||
| 1-2186502-1 | TE Connectivity | T3224-PRINTER Printer Media Type: Roll - Single Sided Print Head Resolution: 24 dpmm Print Head Resolution: 600 dpi Roll - Single Sided 24 dpmm 600 dpi | TE Connectivity RoHS : Compliant |
| 6 | ||
![]() Venkel Ltd. | SAFC1812X7R502-102KNE | VENKEL LTD | Safety Cap;1812;X7R;X1/Y2;1000pF;�10% RoHS : Compliant | 4,000 | ||
| SAFC1808C0G502-151JNE | VENKEL LTD | Safety Cap;1808;C0G;X1/Y2;150pF;�5% RoHS : Compliant | 0 | |||
| SAFC1812C0G502-121JNE | VENKEL LTD | Safety Cap;1812;C0G;X1/Y2;120pF;�5% RoHS : Compliant | 0 | |||
| SAFC1812X7R502-181KNE | VENKEL LTD | Safety Cap;1812;X7R;X1/Y2;180pF;�10% RoHS : Compliant | 0 | |||
| SAFC2208C0G502-121JNE | VENKEL LTD | Safety Cap;2208;C0G;X1/Y2;120pF;�5% RoHS : Compliant | 0 | |||
| SAFC2208X7R502-181KNE | VENKEL LTD | Safety Cap;2208;X7R;X1/Y2;180pF;�10% RoHS : Compliant | 0 | |||
| SAFC2220C0G502-181JNE | VENKEL LTD | Safety Cap;2220;C0G;X1/Y2;180pF;�5% RoHS : Compliant | 0 | |||
| SAFC2208X7R502-102KNE | VENKEL LTD | Safety Cap;2208;X7R;X1/Y2;1000pF;�10% RoHS : Compliant | 0 | |||
| SAFC2211C0G502-180JNE | VENKEL LTD | Safety Cap;2211;C0G;X1/Y2;18pF;�5% RoHS : Compliant | 0 | |||
| SAFC2220C0G502-102JNE | VENKEL LTD | Safety Cap;2220;C0G;X1/Y2;1000pF;�5% RoHS : Compliant | 0 | |||
| SAFC1808C0G502-131JNE | VENKEL LTD | Safety Cap;1808;C0G;X1/Y2;130pF;�5% RoHS : Compliant | 0 | |||
| SAFC1812C0G502-101JNE | VENKEL LTD | Safety Cap;1812;C0G;X1/Y2;100pF;�5% RoHS : Compliant | 0 | |||
| SAFC2208C0G502-101JNE | VENKEL LTD | Safety Cap;2208;C0G;X1/Y2;100pF;�5% RoHS : Compliant | 0 | |||
| SAFC1808C0G502-150JNE | VENKEL LTD | Safety Cap;1808;C0G;X1/Y2;15pF;�5% RoHS : Compliant | 0 | |||
| SAFC1812C0G502-120JNE | VENKEL LTD | Safety Cap;1812;C0G;X1/Y2;12pF;�5% RoHS : Compliant | 0 | |||
![]() Vyrian | XCVM2502-1LSVSVA2197I | AMD Xilinx | Microprocessor Circuit | 25 | ||
| XCVM2502-1MSVSVA2197I | AMD Xilinx | Microprocessor Circuit | 22 | |||
| XCVM2502-1MLIVSVA2197 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 20 | |||
| XCVM2502-1LLIVSVA2197 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 14 | |||
| XCVP1502-1DLIVSVA3340 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 12 | |||
| XCVP1502-1MSIVSVA2785 | AMD Xilinx | Microprocessor Circuit, CMOS, PBGA2785 RoHS : Compliant | 12 | |||
| XCVP2502-1MLIVSVB3340 | AMD Xilinx | Microprocessor Circuit, CMOS, PBGA3340 RoHS : Compliant | 11 | |||
| XCVP1502-1GSIVSVA2785 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 11 | |||
| XCVM1502-1DLIVFVC1760 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 6 | |||
| XCVM1502-1HSEVFVB1369 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 6 | |||
| XCVM1502-1GSEVFVB1369 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 5 | |||
| XCVC1502-1DSEVSVA1596 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 2 | |||
| XCVC1502-1HSIVSVA1596 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 2 | |||
| XCVC1502-1MLEVBVA1024 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 2 | |||
| XCVC1502-1MSENSVG1369 | AMD Xilinx | Microprocessor Circuit, CMOS, PBGA1369 RoHS : Compliant | 2 | |||
![]() Waytek, Inc. | 55021-07 | Cole Hersee | Cole Hersee 55021-07 PVC-coated heavy-duty metal toggle switch is an SPDT (On)-Off-(On) momentary switch rated 25A at 12VDC, 15A at 24VDC, and 10A at 36VDC. It features three 8" wire leads, an O-ring-sealed stem, and PVC-coated housing. |
| 240 | |
| 55021 | Cole Hersee | Cole Hersee 55021 standard heavy-duty metal toggle switch is an SPDT (On)-Off-(On) momentary switch rated 25A at 12VDC, 15A at 24VDC, and 10A at 36VDC. It features three screw terminals, an O-ring seal, silver contacts, and an 11/16" handle. |
| 4 | ||
![]() Win Source Electronics | 50212-8000 | Molex | 2.0 WTB REC TERM RoHS : Compliant |
| 75,400 | |
| 0502128000 | Molex | CONN SOCKET 24-30AWG CRIMP TIN RoHS : Compliant |
| 41,240 | ||
| 0430450212 | Molex | CONN HEADER VERT 2POS RoHS : Compliant |
| 38,950 | ||
| SLG55021-200010V | Renesas Electronics Corporation | IC GATE DRVR HIGH-SIDE 8TDFN RoHS : Compliant |
| 27,084 | ||
| 43045-0218 | Molex | Conn Power HDR 2 POS 3mm Solder RA SMD 2 Terminal 1 Port T/R RoHS : Compliant |
| 13,200 | ||
TPS65021RHAR![]() | Texas Instruments | POWER MANAGEMENT IC FOR LI-ION POWERED SYSTEMS | IC PWR MGMT FOR LI-ION SYS 40QFN RoHS : Compliant |
| 10,254 | ||
| LM5021MM | Texas Instruments | AC-DC Current Mode PWM Controller 1MHz 10-Pin VSSOP |
| 10,000 | ||
LM5021MM-2![]() | Texas Instruments | LM5021 AC-DC Current Mode PWM Controller | IC PWM CTRLR AC-DC CURR 8VSSOP RoHS : Not Compliant |
| 7,000 | ||
LM5021MMX-2/NOPB![]() | Texas Instruments | IC PWM CTLR AC-DC CURR 8VSSOP / AC to DC Switching Converter Flyback 560kHz T/R 8-Pin VSSOP RoHS : Compliant |
| 6,380 | ||
| MIC5021YM | Microchip Technology Inc | IC DRIVER MOSFET HISIDE HS 8SOIC RoHS : Compliant |
| 5,500 | ||
| B50212EB1KMLG | Broadcom Limited | SINGLE GIGABIT PHY |
| 5,215 | ||
| MIC5021YM-TR | Microchip Technology Inc | IC DRIVER MOSFET HISIDE HS 8SOIC RoHS : Compliant |
| 3,540 | ||
TPS65021RHAT![]() | Texas Instruments | IC PWR MGMT FOR LI-ION SYS 40QFN RoHS : Compliant |
| 3,500 | ||
| B50210SB0KMLG | Broadcom Limited |
| 2,250 | |||
| ADRF5021BCCZN | Analog Devices Inc | IC RF SWITCH SPDT 30GHZ 20LGA / RF Switch IC VSAT SPDT 30 GHz 50Ohm 20-LGA (3x3) RoHS : Compliant |
| 800 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |