| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
4953G-S08-R Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
![]() TME | 1-84953-0 | TE Connectivity | Connector: FFC/FPC; data; tinned; SMT; 1A; 200V; FPC; PIN: 10; LCP RoHS : Compliant |
| 45,000 | |
| 1-84953-6 | TE Connectivity | Connector: FFC/FPC; data; tinned; SMT; 1A; 200V; FPC; PIN: 16; right RoHS : Compliant |
| 10,800 | ||
| 84953-5 | TE Connectivity | Connector: FFC/FPC; data; tinned; SMT; 1A; 200V; FPC; PIN: 5; right RoHS : Compliant |
| 6,000 | ||
| 1049534 | Bossard Group | Screw; M6; M6x25; 1; Head: hexagonal; steel; zinc; DIN 933; ISO 4017 |
| 3,500 | ||
| 4953 | Keystone Electronics Corp | Tip: solder lug; THT; brass; tinned RoHS : Compliant |
| 2,913 | ||
| 2-84953-7 | TE Connectivity | Connector: FFC/FPC; data; tinned; SMT; 1A; 200V; FPC; PIN: 27; right RoHS : Compliant |
| 2,400 | ||
| 84953-8 | TE Connectivity | Connector: FFC/FPC; data; tinned; SMT; 1A; 200V; PIN: 8; 1mm RoHS : Compliant |
| 1,634 | ||
| M85049/53-10W | Amphenol Corporation | Enclosure for connectors: D-Sub; straight; unshielded RoHS : Not Compliant |
| 320 | ||
| 1249532 | Lapp Group | Wire; ÖLFLEX® HEAT 180 SiF A; silicone; SiF A; 1x35mm2; stranded RoHS : Compliant |
| 0 | ||
| 10049534 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 30; SMT; 3A; 250V |
| 0 | ||
| 00114953 | GSR | Tap: metric; M20; fine thread,right hand thread; 1.5; L: 80mm; 12mm |
| 0 | ||
| 1495310000 | Weidmüller Interface GmbH & Co. KG | Tip: ring; M5; 4÷4mm2; for cable; non-insulated; 5.3mm RoHS : Compliant |
| 0 | ||
| 1495330000 | Weidmüller Interface GmbH & Co. KG | Tip: ring; M8; 4÷4mm2; for cable; non-insulated; 8.4mm RoHS : Compliant |
| 0 | ||
| 2495380000 | Weidmüller Interface GmbH & Co. KG | Fastening element; 125.6x8x96.5mm; -25÷70°C; IP20; maxGUARD RoHS : Compliant |
| 0 | ||
| 10049533 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 30; SMT; 3A; 250V |
| 0 | ||
![]() Avnet Americas | 84953-6 | TE Connectivity | - Tape and Reel (Alt: 84953-6) RoHS : Compliant |
| 33,000 | |
| 84953-4 | TE Connectivity | - Tape and Reel (Alt: 84953-4) RoHS : Compliant |
| 12,000 | ||
| 84953-8 | TE Connectivity | - Tape and Reel (Alt: 84953-8) RoHS : Compliant |
| 9,000 | ||
| 1-84953-1 | TE Connectivity | - Tape and Reel (Alt: 1-84953-1) RoHS : Compliant |
| 6,000 | ||
| 2-84953-0 | TE Connectivity | - Tape and Reel (Alt: 2-84953-0) RoHS : Compliant |
| 1,200 | ||
| 1-174953-1 | TE Connectivity | - Rail/Tube (Alt: 1-174953-1) RoHS : Compliant |
| 78 | ||
| A495303 | Eaton Corporation | - Bulk (Alt: A495303) RoHS : Compliant |
| 75 | ||
| 1-84953-6 | TE Connectivity | - Bulk (Alt: 17R2320) RoHS : Compliant |
| 0 | ||
| 84953-8 | TE Connectivity | - Product that comes on tape, but is not reeled (Alt: 69AH6364) RoHS : Compliant |
| 0 | ||
| M85049/53-16N | Glenair Inc | - Bulk (Alt: M85049/53-16N) RoHS : Not Compliant |
| 0 | ||
| 1-84953-6 | TE Connectivity | - Tape and Reel (Alt: 1-84953-6) RoHS : Compliant |
| 0 | ||
| M85049/53-14Z | Amphenol Corporation | STRAIGHT NON SELF-LOCKING STRAIN RELIEF FOR 26482 SERIES II; 5015 SERIES III; 83723 SERIES III SIZE - Bulk (Alt: A850495314Z) RoHS : Not Compliant |
| 0 | ||
| M85049/53-16N | Amphenol Corporation | - Bulk (Alt: A850495316N) RoHS : Not Compliant |
| 0 | ||
| 1495310000 | Weidmüller Interface GmbH & Co. KG | Tubular Cable Lug Terminal M5 4mm2 Right Angle Copper Tin Plated - Bulk (Alt: 1495310000) RoHS : Not Compliant |
| 0 | ||
| 533495-3 | TE Connectivity | - Rail/Tube (Alt: 533495-3) RoHS : Not Compliant |
| 0 | ||
![]() Newark | 84953-5 | TE Connectivity | Fpc Connector, Receptacle 5Pos 1Mmpitch; |Te Connectivity Amp 84953-5 RoHS : Compliant |
| 2,490 | |
| 84953-8 | TE Connectivity | Conn, Fpc, Rcpt, R/A, 8Pos, 1Mm, Smt; |Te Connectivity Amp 84953-8 RoHS : Compliant |
| 2,449 | ||
| 4953 | Keystone Electronics Corp | Test Point, Pcb, Through Hole; Product Range:-; Connector Colour:-; Connector Mounting:Through Hole Mount; Mounting Hole Dia:1.19Mm; Contact Material:Brass; Contact Plating:Tin Plated Contacts Rohs Compliant: Yes |Keystone 4953 RoHS : Compliant |
| 1,681 | ||
| 2474495-3 | TE Connectivity | Rf Coax Conn, Fakra Plug, Pcb, 50 Ohm; |Te Connectivity 2474495-3 RoHS : Compliant |
| 1,200 | ||
| 1-84953-0 | TE Connectivity | Ffc/Fpc Board Connector, Surface Mount; |Te Connectivity Amp 1-84953-0 RoHS : Compliant |
| 1,062 | ||
| 1-84953-6 | TE Connectivity | Ffc/Fpc Connector, Receptacle 16 Positio; |Te Connectivity Amp 1-84953-6 RoHS : Compliant |
| 762 | ||
| 1-84953-6 | TE Connectivity | Connector, Ffc/Fpc, Rcpt, 16Pos, 1Mm; Pitch Spacing:1Mm; No. Of Contacts:16Contacts; Gender:Receptacle; Product Range:Fpc Series; Contact Termination Type:Surface Mount; Contact Position:Top; No. Of Rows:1 Row Rohs Compliant: Yes RoHS : Compliant |
| 607 | ||
| 1-84953-0 | TE Connectivity | Conn Ffc/Fpc Brd, 1Mm, 10Pos, Plug; |Te Connectivity Amp 1-84953-0 RoHS : Compliant |
| 541 | ||
| 84953-8 | TE Connectivity | Conn Ffc/Fpc Brd, 1Mm, 8Pos, Rcpt; |Te Connectivity Amp 84953-8 RoHS : Compliant |
| 420 | ||
| 84953-5 | TE Connectivity | Fpc Connector, Receptacle 5 Position 1Mmpitch; Pitch Spacing:1Mm; No. Of Contacts:5Contacts; Gender:Receptacle; Product Range:Fpc Series; Contact Termination Type:Surface Mount; Contact Position:Top; No. Of Rows:1 Row Rohs Compliant: Yes RoHS : Compliant |
| 392 | ||
| ZW-10-13-G-D-495-367 | Samtec Inc | Conn Stack Brd, 2.54Mm, 20Pos, Hdr; |Samtec, Inc. ZW-10-13-G-D-495-367 RoHS : Compliant |
| 305 | ||
| TMS-149-53-S-D | Samtec Inc | Hdr, Brd-To-Brd, 1.27Mm, 98Pos; |Samtec, Inc. TMS-149-53-S-D RoHS : Compliant |
| 72 | ||
| M85049/53-10W | Amphenol PCD | Tie Wrap, Str, Cad Rohs Compliant: No |Amphenol Pcd M85049/53-10W RoHS : Not Compliant |
| 51 | ||
| 659-2495-303F | Dialight | Led Panel Ind, Red/Grn/Yel, 12.7Mm, 30V; |Dialight 659-2495-303F RoHS : Compliant |
| 7 | ||
| 4953 | Adafruit Industries | Kailh Mechanical Key Switches - Linear Black - 10 Pack - Cherry Mx Black Compatible |Adafruit 4953 RoHS : Not Compliant |
| 0 | ||
![]() RS | 84953-8 | TE Connectivity | 1MM FPC HORZ.TOP CONT.ASSY 8P, FPC CONNECTORS RoHS : Compliant |
| 1,445 | |
| 7649536 | RS Pro | NON-RESETTABLE WIRE ENDED FUSE 3.18MM DIAMETER EPOXY COATED 0.5A 250VAC |
| 130 | ||
| 7649539 | RS Pro | NON-RESETTABLE WIRE ENDED FUSE 2.65MM DIAMETER EPOXY COATED 4A 125VAC/DC |
| 125 | ||
| 7649532 | RS Pro | NON-RESETTABLE WIRE ENDED FUSE 2.65MM DIAMETER SPEED T 5A 125VAC/DC QTY X 10 |
| 110 | ||
| A495305 | Eaton Electronics | DISCONNECT BLOCK |
| 50 | ||
| 4953655 | RS Pro | COMBINATION WRENCH CHROME VANADIUM STEEL 0.24" (6MM) SIZE 4.88" LENGTH |
| 17 | ||
| 4953677 | RS Pro | COMBINATION WRENCH CHROME VANADIUM STEEL 0.31" (8MM) SIZE 5.35" LENGTH |
| 12 | ||
| 4953598 | RS Pro | COMBINATION WRENCH CHROME VANADIUM STEEL 0.94" (24MM) SIZE 12.48" LENGTH |
| 9 | ||
| 4953532 | RS Pro | COMBINATION WRENCH CHROME VANADIUM STEEL 0.75" (19MM) SIZE 9.84" LENGTH |
| 6 | ||
| 4953611 | RS Pro | COMBINATION WRENCH CHROME VANADIUM STEEL 1.18" (30MM) SIZE 15.51" LENGTH |
| 3 | ||
| 149535 | Gems Sensors & Controls | CONTROLLER; SPDT; 5A;115VAC; 1/4-IN. MALE SPADE TERM.; LED INDICATORS; NEMA 4X |
| 1 | ||
| 4953784 | RS Pro | OPEN ENDED WRENCH 0.24 X 0.28(6 X 7MM) DOUBLE ENDED CHROME VANADIUM STEEL |
| 1 | ||
| 658-2495-303F | Dialight | INDICATOR, PANEL MOUNT, DOME, RED/GREEN/YELLOW, 8-30VDC, 658 SERIES |
| 1 | ||
| 4953 | Adafruit Industries | KAILH MECHANICAL KEY SWITCHES - LINEAR BLACK - 10 PACK - MX BLACK COMPATIBLE |
| 0 | ||
| 4953 | Keystone Electronics Corp | PC LOOP TEST POINT;THRU-HOLE;BRASS RoHS : Compliant |
| 0 | ||
![]() STMicroelectronics | L4953G | STMicroelectronics | Voltage regulator with backup and reset, ignition comparator and low voltage warning RoHS : Compliant |
| 0 | |
![]() Bisco Industries | 5710-495-30 | Seastrom Mfg | 906 | |||
| 4953 | Keystone Electronics Corp | RoHS : Compliant | 108 | |||
| 49537.0000 | RAF Electronic Hardware | 101 | ||||
| 5710-495-30-P | Seastrom Mfg | 45 | ||||
| 66666-4953 | Amatom Electronic Hardware | 22 | ||||
| 9033495-35 | HEX HEAD CAP SCREWS | 10 | ||||
| A495302 | Eaton Bussmann | 7 | ||||
![]() Rochester Electronics | TLE4953CBAMA1 | Infineon Technologies AG | Solid State Magnetic Sensor Special Purpose Hall Effect 2-SIP RoHS : Compliant |
| 428 | |
| TLE4953CHAMA3 | Infineon Technologies AG | Solid State Magnetic Sensor Special Purpose Hall Effect 2-SIP Ammo RoHS : Compliant |
| 1,252 | ||
| TLE4953CNBAMA1 | Infineon Technologies AG | Solid State Magnetic Sensor Special Purpose Hall Effect 2-SIP T/R RoHS : Compliant |
| 55,500 | ||
| TLE4953E0184HALA1 | Infineon Technologies AG | Solid State Magnetic Sensor Special Purpose Hall Effect 2-SIP Ammo RoHS : Compliant |
| 597 | ||
| TLE4953C | Infineon Technologies AG | Solid State Magnetic Sensor Special Purpose Hall Effect 2-SIP RoHS : Compliant |
| 22 | ||
| TLE4953 | Infineon Technologies AG | Solid State Magnetic Sensor Special Purpose Hall Effect 2-SIP Ammo RoHS : Compliant |
| 8,018 | ||
| TLE4953HALA1 | Infineon Technologies AG | Solid State Magnetic Sensor Special Purpose Hall Effect 2-SIP Ammo RoHS : Compliant |
| 1,395 | ||
| LM4953SD/NOPB | Texas Instruments | Audio Amplifier, 1 Channel(s), 1 Func, PDSO14 RoHS : Compliant |
| 7,000 | ||
SI4953DY![]() | Fairchild Semiconductor Corporation | MOSFET 2 P-Channel 30V 4.9A (Ta) 8-SOIC RoHS : Not Compliant |
| 2,500 | ||
| LM4953SDX/NOPB | National Semiconductor Corporation | Audio Amplifier, 1 Func, PDSO14 RoHS : Compliant |
| 4,500 | ||
![]() Sager | 4953 | Keystone Electronics Corp | Test Plugs & Test Jacks PCB TEST POINT .512 RoHS : Compliant |
| 0 | |
| 1-84953-6 | TE Connectivity | FFC & FPC Connectors 1MM FPC HORZ.TOP CONT.ASSY 16P RoHS : Compliant |
| 0 | ||
| 194953-000 | TE Connectivity | Heat Shrink Cable Boots & End Caps 202K163-25-11-0 RoHS : Compliant |
| 0 | ||
| 533495-3 | TE Connectivity | High Speed / Modular Connectors BOX II 3 ROW RECP ASSM 174 POS RoHS : Not Compliant |
| 0 | ||
| BT1-X0-04-953-1X2-D | Carling Technologies | Circuit Breakers | 0 | |||
| 84953-8 | TE Connectivity | FFC & FPC Connectors 1MM CONT ASSY 8P HORIZONTAL TOP FPC RoHS : Compliant |
| 0 | ||
| A22-X0-19-549-531-C | Carling Technologies | Rocker Switches | 0 | |||
| DWM-49-53-L-S-250 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| EG4953-000 | TE Connectivity | Standard Circular Connector BND40AB00-1407W | 0 | |||
| IUGN66-41495-35 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| HDWM-49-53-L-S-250 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| 2-84953-7 | TE Connectivity | FFC & FPC Connectors 1MM FPC HORZ.TOP CONT. ASSY 27P RoHS : Compliant |
| 0 | ||
| 2842495-3 | TE Connectivity | 2X3P TB HDR VT (180) W/ FLG 3.5, BK RoHS : Compliant |
| 0 | ||
| 219-3-7495-3 | Sensata Circuit Breakers | Circuit Breakers Cir Brkr,HydMag |
| 0 | ||
| 1-794953-4 | TE Connectivity | Headers & Wire Housings PANEL MOUNT PLUG 14P RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | 11749531 | TE Connectivity | AVAILABLE EU | 3,944 | ||
![]() ComSIT USA | 3849530 | TE Connectivity | 1.0 MM, FPC CONNECTOR RIGHT ANGLE, SMT, TOP CONTACT FFC/FPC Connector, 30 Contact(s), 1 Row(s), Female, Right Angle, 0.039 inch Pitch, Surface Mount Terminal, Locking, Natural Insulator RoHS : Not Compliant | 2,400 | ||
FDS4953![]() | Fairchild Semiconductor Corporation | DUAL 30V P-CHANNEL POWERTRENCH MOSFET Power Field-Effect Transistor, 5A I(D), 30V, 0.055ohm, 2-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 525 | |||
| A4953ELJTRT | Evergreen/Vinnic | FULL-BRIDGE DMOS PWM MOTOR DRIVER Brush DC Motor Controller, 2A, DMOS, PDSO8 RoHS : Compliant | 134 | |||
| AP4953GMHF | apec | Electronic Component RoHS : Not Compliant | 30 | |||
| TGA4953SL | TriQuint Semiconductor | 9.9-12.5 GIGABITS/SECOND OPTICAL MODULATOR DRIVER Telecom Circuit, 1-Func, PBGA27 RoHS : Compliant | 3 | |||
![]() Interstate Connecting Components | 84953-8 | TE Connectivity | 1MM FPC HORZ.TOP CONT.ASSY 8P RoHS : Compliant |
| 3,750 | |
| M85049/53-10W | Amphenol PCD | 26482 SII/83723 SIII/5015 Backshell Tie Wrap |
| 4 | ||
| 1-84953-6 | TE Connectivity | 1MM FPC HORZ.TOP CONT.ASSY 16P RoHS : Compliant |
| 0 | ||
| M85049/53-14Z | Glenair Inc | QWIK-TY STRAIN RELIEF RoHS : Compliant | 0 | |||
| M85049/53-14Z | Amphenol PCD | M8504953-14Z | 0 | |||
| M85049/53-16N | Amphenol PCD | 26482 SII/83723 SIII/5015 Backshell Tie Wrap |
| 0 | ||
| M85049/53-16N | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S RoHS : Not Compliant |
| 0 | ||
| M85049/53-61N | Glenair Inc | QWIK-TY STRAIN RELIEF | 0 | |||
| 1-1614953-1 | TE Connectivity | CPF0805 8K2 0.1% 25PPM 5K RL RoHS : Compliant |
| 0 | ||
| 533495-3 | TE Connectivity | BOX II 3 ROW RECP ASSY 174 POS RoHS : Not Compliant |
| 0 | ||
| 2-84953-7 | TE Connectivity | 1MM FPC HORZ.TOP CONT.ASSY 27P RoHS : Compliant |
| 0 | ||
| M85049/53-10W | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S RoHS : Not Compliant |
| 0 | ||
| M85049/53-28N | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S RoHS : Not Compliant |
| 0 | ||
| M85049/53-28N | Amphenol PCD | 26482 SII/83723 SIII/5015 Backshell Tie Wrap |
| 0 | ||
| 2842495-3 | TE Connectivity | 2X3P TB HDR VT (180) W/ FLG RoHS : Compliant | 0 | |||
![]() PEI Genesis | M85049/53-10W | Amphenol PCD |
| 165 | ||
| 172495-3 | SOURIAU-SUNBANK |
| 0 | |||
| M85049/53-14Z | Amphenol PCD |
| 0 | |||
| M85049/53-16N | Amphenol PCD |
| 0 | |||
| M85049/53-16N | SOURIAU-SUNBANK |
| 0 | |||
| S85049/53-08W-212 | SOURIAU-SUNBANK |
| 0 | |||
| S4953C2203S2L34 | SOURIAU-SUNBANK |
| 0 | |||
| S85049/53-20W-212 | SOURIAU-SUNBANK |
| 0 | |||
| M85049/53-8A | Amphenol PCD |
| 0 | |||
| M85049/53-10W | SOURIAU-SUNBANK |
| 0 | |||
| M85049/53-28N | SOURIAU-SUNBANK |
| 0 | |||
| M85049/53-28N | Amphenol PCD |
| 0 | |||
| S4953C2007RL12 | SOURIAU-SUNBANK |
| 0 | |||
| 88-637495-35S | Amphenol Corporation |
| 0 | |||
| M85049/53-18A | Amphenol PCD |
| 0 | |||
![]() Chip 1 Exchange | 2-84953-0 | TE Connectivity | INSTOCK RoHS : Compliant | 87,288 | ||
| 1-84953-9 | TE Connectivity | INSTOCK RoHS : Compliant | 17,160 | |||
| 3-84953-0 | TE Connectivity | INSTOCK RoHS : Compliant | 16,091 | |||
| 1-84953-6 | TE Connectivity | INSTOCK RoHS : Compliant | 14,040 | |||
| 1-84953-3 | TE Connectivity | INSTOCK RoHS : Compliant | 14,040 | |||
| 2-84953-7 | TE Connectivity | INSTOCK RoHS : Compliant | 12,378 | |||
| MBB/SMA0207-50-1%-RBN4953K | INSTOCK | 12,000 | ||||
| 0-0926495-3 | INSTOCK | 8,017 | ||||
| 76495-3107 | Molex | INSTOCK RoHS : Compliant | 6,825 | |||
| 1495352-1 | TE Connectivity | INSTOCK | 6,432 | |||
| 794953-2 | INSTOCK | 2,000 | ||||
FDS4953![]() | Fairchild Semiconductor Corporation | INSTOCK RoHS : Compliant | 993 | |||
| 84953-8 | TE Connectivity | INSTOCK RoHS : Compliant | 670 | |||
| 554953-2 | CTI | INSTOCK | 19 | |||
| FDS4953 | INSTOCK | 7 | ||||
![]() Avnet Abacus | 1-84953-0 | TE Connectivity | FFC FPC Board Connector 1 mm 10 Contacts Plug Surface Mount Straight Top - Tape and Reel (Alt: 1-84953-0) RoHS : Compliant | 34,500 | ||
| 84953-6 | TE Connectivity | FFC FPC Board Connector 1 mm 6 Contacts Receptacle FPC Surface Mount Top (Alt: 84953-6) RoHS : Compliant | 15,000 | |||
| 84953-4 | TE Connectivity | FFC FPC Board Connector 1 mm 4 Contacts Receptacle Surface Mount Top (Alt: 84953-4) RoHS : Compliant | 15,000 | |||
| 1-84953-2 | TE Connectivity | FFC FPC Board Connector 1 mm 12 Contacts Receptacle FPC Surface Mount Top - Tape and Reel (Alt: 1-84953-2) RoHS : Compliant | 6,000 | |||
| 84953-6 | TE Connectivity | FFC FPC Board Connector 1 mm 6 Contacts Receptacle FPC Surface Mount Top (Alt: 84953-6) RoHS : Compliant | 4,500 | |||
| 1-84953-8 | TE Connectivity | Conn FPC Connector SKT 18 POS 1mm Solder RA SMD TR (Alt: 1-84953-8) RoHS : Compliant | 3,600 | |||
| 84953-4 | TE Connectivity | FFC FPC Board Connector 1 mm 4 Contacts Receptacle Surface Mount Top (Alt: 84953-4) RoHS : Compliant | 1,500 | |||
| 1-84953-2 | TE Connectivity | FFC FPC Board Connector 1 mm 12 Contacts Receptacle FPC Surface Mount Top - Tape and Reel (Alt: 1-84953-2) RoHS : Compliant | 1,200 | |||
| 84953-8 | TE Connectivity | FFCFPC Connector Socket 8 Position 1 mm Solder Right Angle Surface Mount TR (Alt: 84953-8) RoHS : Compliant | 0 | |||
| 84953-8 | TE Connectivity | FFCFPC Connector Socket 8 Position 1 mm Solder Right Angle Surface Mount TR (Alt: 84953-8) RoHS : Compliant | 0 | |||
| 1-84953-6 | TE Connectivity | Conn FPC Connector SKT 16 POS 1mm Solder RA SMD Reel (Alt: 1-84953-6) RoHS : Compliant | 0 | |||
| 1-84953-6 | TE Connectivity | Conn FPC Connector SKT 16 POS 1mm Solder RA SMD Reel (Alt: 1-84953-6) RoHS : Compliant | 0 | |||
| 194953-000 | TE Connectivity | (Alt: 194953-000) RoHS : Compliant | 0 | |||
| 1749530000 | Weidmüller Interface GmbH & Co. KG | WDM1749530000 (Alt: 1749530000) RoHS : Compliant | 0 | |||
| NY495301FA20 | Vishay Intertechnologies | Res Metal Film 953K Ohm 1 12W 50ppmC Conformal AXL ThruHole Ammo Pack (Alt: NY495301FA20) RoHS : Compliant | 0 | |||
![]() Avnet Asia | JDS-LT13BE4953 | Qnity Laird | DSTRHOL,ECE081,PSA (Alt: JDS-LT13BE4953) RoHS : Compliant | 0 | ||
![]() Avnet Silica | L4953G | STMicroelectronics | Standard Regulator Pos 92V5V5V 05A1A01A 15Pin15Tab MULTIWATT V Tube (Alt: L4953G) RoHS : Compliant | 0 | ||
| CRD49530-USB | Cirrus Logic | Development Kit For CS4953xx Audio DSP (Alt: CRD49530-USB) RoHS : Not Compliant | 0 | |||
CS495303-CVZR![]() | Cirrus Logic | Audio Decoder 128Pin LQFP TR (Alt: CS495303-CVZR) RoHS : Compliant | 0 | |||
CS495314-CVZR![]() | Cirrus Logic | (Alt: CS495314-CVZR) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 1-330495-3 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 14,000 | |
| 495-351-20250 | Amphenol Corporation | IN STOCK SHIP TODAY | 13 | |||
| 495-351-50250 | Amphenol Corporation | IN STOCK SHIP TODAY | 8 | |||
| 495-351-30050 | Amphenol Corporation | IN STOCK SHIP TODAY | 7 | |||
| ERC-55-104-95.3K-1%-T-2 | Vishay Dale | IN STOCK SHIP TODAY |
| 6 | ||
| 595-4953-01 | Sun Microsystems Inc | IN STOCK SHIP TODAY | 1 | |||
| 495-351-50150 | Amphenol Corporation | IN STOCK SHIP TODAY | 1 | |||
| 495-351-20050 | Amphenol Corporation | IN STOCK SHIP TODAY | 1 | |||
![]() DB Roberts | SPL49532 | Spiralock | #10-32 SPL HI LIMIT PD GAGE |
| 13 | |
| SPL49534 | Spiralock | #10-32 SPL HI LIMIT HANDLE |
| 8 | ||
| SPL49531 | Spiralock | #10-32 SPL GO HANDLE Standard Gage |
| 4 | ||
| 14953 | Heyco | BRASS CGHT PG29-275X8MMTHD | 0 | |||
| 49538 | Pop Rivets | FAM400-284 | 0 | |||
| 52-49-53-4-000 | Southco | Captive fastening in tight spaces is no problem with the reduced footprint of these Miniature Series captive screws. Combination tool-head recesses and knurled screw options provide lots of versatility for fastening/unfastening by hand or with tools. | 0 | |||
| SPL49533 | Spiralock | #10-32 SPL Hi Limit Ramp Gage Standard Gage | 0 | |||
| 52-49-53-4 | Southco | Captive fastening in tight spaces is no problem with the reduced footprint of these Miniature Series captive screws. Combination tool-head recesses and knurled screw options provide lots of versatility for fastening/unfastening by hand or with tools. | 0 | |||
| 49534 | Pop Rivets | FAM400-365 | 0 | |||
| 49535 | Pop Rivets | DPM400-366 | 0 | |||
| 49536 | Pop Rivets | DPM400-363 | 0 | |||
| SPL49538 | Spiralock | #10-32 SPL Gage Set | 0 | |||
| 49539 | Pop Rivets | FAM400-285 | 0 | |||
| 17W04953 | Essentra Components | FLAT WASHER, .375 ID, .500 OD, | 0 | |||
| 17W04953B | Essentra Components | FLAT WASHER, .375 ID, .500 OD, | 0 | |||
![]() EBV Elektronik | TLE4953E0184HALA1 | Infineon Technologies AG | Hall Effect Sensor (Alt: SP000844996) RoHS : Compliant | 16,000 | ||
| TLE4953CHAMA3 | Infineon Technologies AG | Hall Effect Sensor SSO 2 Pins 45 V 20 V 10 C (Alt: SP001952920) RoHS : Compliant | 0 | |||
![]() Master Electronics | 1-84953-6 | TE Connectivity | 1MM FPC HORZ.TOP CONT.ASSY 16P RoHS : Compliant |
| 19,458 | |
| 84953-8 | TE Connectivity | 1MM FPC HORZ.TOP CONT.ASSY 8P RoHS : Compliant |
| 9,743 | ||
| 25.332.4953.1 | Wieland Electric GmbH | Terminal Block - Header - 5 mm - 19 Positions - 15 A - 300 V RoHS : Compliant |
| 99 | ||
| 194953-000 | TE Connectivity | 202K163-25-11-0 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1-1614953-1 | TE Connectivity | CPF0805 8K2 0.1% 25PPM 5K RL RoHS : Compliant |
| 0 | ||
| 533495-3 | TE Connectivity | BOX II 3 ROW RECP ASSY 174 POS MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| DWM-49-53-L-S-225 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DWM-49-53-L-S-270 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DWM-49-53-L-S-205 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DWM-49-53-L-S-250 | Samtec Inc | .050 x .100 Flex Stack Flexible Micro Board Stacker RoHS : Compliant |
| 0 | ||
| H4953RBDA | TE Connectivity | H4 953R 0.1% 25PPM Thin Film Leaded Precision resistors Fixed Resistor RoHS : Compliant |
| 0 | ||
| HDWM-49-53-L-S-250 | Samtec Inc | Conn Board Stacker HDR 49 POS 1.27mm Solder ST Thru-Hole Bulk RoHS : Compliant |
| 0 | ||
| HTMS-149-53-S-S | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 2-84953-7 | TE Connectivity | 1MM FPC HORZ.TOP CONT.ASSY 27P RoHS : Compliant |
| 0 | ||
| M85049/53-10W | Amphenol PCD | Quick Clamp - 0.365 (9.27mm) Cable Opening - Shell Size 10 - 180° Cable Exit - Aluminum Alloy - Olive Drab. RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W01495-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to TNC Male Low Loss Cable 36 Inch Length Using LMR-240 Coax., Radio frequency assembly SMA male to TNC male low loss cable 36 inch length using LMR-240 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male low loss cable 36 inch length using LMR-240 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and TNC cable connection on the other. Our low loss SMA to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W01495-36 can also be known as a low loss SMA plug to TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3W01495-36 is built with LMR-240 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMA male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W01495-36 can also be used in the other direction and will be TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC male low loss cable 36 inch length using LMR-240 coax. |
| 4,213 | |
| PE4953 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: C, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Clamp/Solder, Mount Method: None, Interface Type 1: RG174, Interface Type 2: RG316, Interface Type 3: RG188. C Male Connector Clamp/Solder Attachment for RG174, RG316, RG188. PE4953 type C male coaxial connector has an interface type of RG174, RG316, RG188 and a 50 Ohm impedance. Pasternack type C male connector uses shield/contact clamp/solder as an attachment method. The Pasternack type C coaxial connector has a brass body with nickel plating. This type C male coaxial RF connector is REACH compliant. This Pasternack male C type connector will ship the same day as purchased. Our type C male connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom type C connector cable assemblies that will ship the same day as well. |
| 320 | ||
| PE3C4953 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. Slide-On BMA Plug Bulkhead to Snap-On BMA Jack Cable Using RG400 Coax., Radio frequency assembly slide-on BMA plug bulkhead to snap-on BMA jack cable using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to snap-on BMA jack cable using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and BMA cable connection on the other. Our BMA to BMA cable assemblies have a plug gender on end 1 and jack on end 2. This BMA to BMA cable is a plug to jack coax assembly, PE3C4953, can also be known as a BMA male to BMA female cable assembly and will be shipped same-day as it is purchased. BMA male to BMA female cable assembly PE3C4953 is built with RG400 which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to BMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 12.4 GHz maximum frequency BMA plug bulkhead to BMA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4953 can also be used in the other direction and will be BMA jack to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to BMA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to snap-on BMA jack cable using RG400 coax. | 90 | |||
| PE3C4953-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 24 inches. Slide-On BMA Plug Bulkhead to Snap-On BMA Jack Cable 24 Inch Length Using RG400 Coax., Radio frequency assembly slide-on BMA plug bulkhead to snap-on BMA jack cable 24 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to snap-on BMA jack cable 24 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and BMA cable connection on the other. Our BMA to BMA cable assemblies have a plug gender on end 1 and jack on end 2. This BMA to BMA cable is a plug to jack coax assembly, PE3C4953-24, can also be known as a BMA male to BMA female cable assembly and will be shipped same-day as it is purchased. BMA male to BMA female cable assembly PE3C4953-24 is built with RG400 which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to BMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 12.4 GHz maximum frequency BMA plug bulkhead to BMA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4953-24 can also be used in the other direction and will be BMA jack to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to BMA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to snap-on BMA jack cable 24 inch length using RG400 coax. |
| 18 | ||
| PE3C4953-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 12 inches. Slide-On BMA Plug Bulkhead to Snap-On BMA Jack Cable 12 Inch Length Using RG400 Coax., Radio frequency assembly slide-on BMA plug bulkhead to snap-on BMA jack cable 12 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to snap-on BMA jack cable 12 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and BMA cable connection on the other. Our BMA to BMA cable assemblies have a plug gender on end 1 and jack on end 2. This BMA to BMA cable is a plug to jack coax assembly, PE3C4953-12, can also be known as a BMA male to BMA female cable assembly and will be shipped same-day as it is purchased. BMA male to BMA female cable assembly PE3C4953-12 is built with RG400 which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to BMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 12.4 GHz maximum frequency BMA plug bulkhead to BMA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4953-12 can also be used in the other direction and will be BMA jack to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to BMA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to snap-on BMA jack cable 12 inch length using RG400 coax. |
| 18 | ||
| PE3C4953-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 36 inches. Slide-On BMA Plug Bulkhead to Snap-On BMA Jack Cable 36 Inch Length Using RG400 Coax., Radio frequency assembly slide-on BMA plug bulkhead to snap-on BMA jack cable 36 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to snap-on BMA jack cable 36 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and BMA cable connection on the other. Our BMA to BMA cable assemblies have a plug gender on end 1 and jack on end 2. This BMA to BMA cable is a plug to jack coax assembly, PE3C4953-36, can also be known as a BMA male to BMA female cable assembly and will be shipped same-day as it is purchased. BMA male to BMA female cable assembly PE3C4953-36 is built with RG400 which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to BMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 12.4 GHz maximum frequency BMA plug bulkhead to BMA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4953-36 can also be used in the other direction and will be BMA jack to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to BMA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to snap-on BMA jack cable 36 inch length using RG400 coax. |
| 18 | ||
| PE44953 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: SMP, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder, Mount Method: Thread-In, Interface Type 1: Hermetic Seal Pins. SMP Male Limited Detent Shroud Thread-In Mount. PE44953 SMP male thread-in shroud limited detent connector has an interface type of SMP male, which is compatible with hermetic seal pins cables, and has an impedance of 50 Ohms. Pasternack’s SMP male thread-in connector uses solder as an attachment method. This SMP male RF connector is stocked to be readily available for same business day shipment and can also be designed onto custom cable configurations using our online cable creator. Pasternack’s SMP shroud connector has a passivated stainless steel body. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. Our high-quality PE44953 RF connector features a QQ-P-35 body plating specification. Our SMP male connector has a length of 0.16 inches, a width of 0.12 inches, and a weight of 0.003 lbs. This Pasternack male SMP thread-in connector will ship the same business day as purchased. Our thread-in SMP male shroud connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements. |
| 5 | ||
| PE3W14953LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm. N Female Right Angle Bulkhead to N Male Cable Using PE-SR402AL Coax with HeatShrink, LF Solder. PE3W14953LF/HS is a N female right angle bulkhead to N male cable using PE-SR402AL coax. This Pasternack N female right angle bulkhead to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our female N right angle bulkhead to male N cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W14953LF/HS N female right angle bulkhead to N male cable assembly is constructed with PE-SR402AL coax. | 0 | |||
| PE3W03495-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Clamped TNC Male to TNC Male Low Loss Cable 36 Inch Length Using LMR-400 Coax., Radio frequency assembly clamped TNC male to TNC male low loss cable 36 inch length using LMR-400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Clamped TNC male to TNC male low loss cable 36 inch length using LMR-400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our low loss TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W03495-36 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3W03495-36 is built with LMR-400 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this clamped TNC male to TNC male low loss cable 36 inch length using LMR-400 coax. |
| 0 | ||
| PE33495-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMB Plug to BNC Female Cable 36 Inch Length Using RG316 Coax., Radio frequency assembly SMB plug to BNC female cable 36 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMB plug to BNC female cable 36 inch length using RG316 coax, SMB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMB cable connection on one end and BNC cable connection on the other. Our SMB to BNC cable assemblies have a plug gender on end 1 and female on end 2. PE33495-36 can also be known as a SMB male to BNC jack cable assembly and will be shipped same-day as it is purchased. SMB male to BNC jack cable assembly PE33495-36 is built with RG316 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMB plug to BNC female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33495-36 can also be used in the other direction and will be BNC female to SMB plug cable assembly if the opposite connectivity is required. SMB male to BNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to BNC cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug to BNC female cable 36 inch length using RG316 coax. |
| 0 | ||
| PE3FCA495-3M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: FC, Connector 1 Polish Type: APC, Connector 2 Series: FC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex FC APC, NK to FC UPC, NK, SM OS2, 2.0mm LSZH, Yellow-3M. Pasternack’s PE3FCA495-3M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 3-meter long simplex cable assembly is equipped with FC/APC narrow key to FC/UPC narrow key connectors. Our yellow fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA495-3M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. This PE3FCA495-3M fiber optic cable with a 2 mm cable diameter and 15 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of simplex FC/APC to FC/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 0 | ||
| PE38495-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Female to QN Male Right Angle Cable 36 Inch Length Using RG213 Coax., Radio frequency assembly N female to QN male right angle cable 36 inch length using RG213 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N female to QN male right angle cable 36 inch length using RG213 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to QN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and right angle QN cable connection on the other. Our N type to right angle QN cable assemblies have a female gender on end 1 and male on end 2. This type N to QN cable is a female to male coax assembly, PE38495-36, can also be known as a type N jack to right angle QN plug cable assembly and will be shipped same-day as it is purchased. N type jack to QN plug cable assembly PE38495-36 is built with RG213 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle QN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this type N female to QN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE38495-36 can also be used in the other direction and will be right angle QN male to N type female cable assembly if the opposite connectivity is required. Type N jack to QN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to QN cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female to QN male right angle cable 36 inch length using RG213 coax. |
| 0 | ||
| PE3W14953 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm. N Female Right Angle Bulkhead to N Male Cable Using PE-SR402AL Coax. PE3W14953 is a N female right angle bulkhead to N male cable using PE-SR402AL coax. This Pasternack N female right angle bulkhead to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our female N right angle bulkhead to male N cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W14953 N female right angle bulkhead to N male cable assembly is constructed with PE-SR402AL coax. | 0 | |||
| PE3W04953/BK/HS | Pasternack Enterprises | 0 | ||||
| PE3495-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 36 inches. BNC Male to BNC Male Cable 36 Inch Length Using RG142 Coax., Radio frequency assembly BNC male to BNC male cable 36 inch length using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 36 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3495-36, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3495-36 is built with RG142 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 36 inch length using RG142 coax. | 0 | |||
![]() Vyrian | A495303 | Eaton Corporation | Barrier Strip Terminal Block, 50A, 1 Row(s), 1 Deck(s) | 12,895 | ||
| 1-174953-1 | TE Connectivity | Combination Line Connector, 3 Contact(s), Male, Solder Terminal RoHS : Compliant | 12,777 | |||
| ADIS16495-3BMLZ | Analog Devices Inc | Analog Circuit, 1 Func, Hybrid RoHS : Compliant | 12,282 | |||
| 1-2338495-3 | TE Connectivity | Connector Accessory RoHS : Compliant | 11,882 | |||
| 2-84953-3 | TE Connectivity | FFC/FPC Connector, 23 Contact(s), 1 Row(s), Female, Right Angle, 0.039 inch Pitch, Surface Mount Terminal, Locking, Natural Insulator RoHS : Compliant | 11,239 | |||
| TLE4953CBAMA1 | Infineon Technologies AG | Hall Effect Sensor, -500mT Min, 500mT Max, Rectangular, Through Hole Mount RoHS : Compliant | 8,421 | |||
| LM4953SD-N | Texas Instruments | Audio Amplifier, 1 Func, PDSO14 RoHS : Not Compliant | 8,197 | |||
| 1749531 | Phoenix Contact | Barrier Strip Terminal Block, 8A, 1.5mm2, 2 Row(s), 1 Deck(s) RoHS : Compliant | 7,506 | |||
| 554953-1 | TE Connectivity | Telecom and Datacom Connector, 50 Contact(s), Male, IDC Terminal, Plug RoHS : Compliant | 7,050 | |||
| LM4953SDBD | Texas Instruments | 6,587 | ||||
| L4953K | STMicroelectronics | RoHS : Compliant | 6,460 | |||
| LM4953SDBD-NOPB | Texas Instruments | 4,424 | ||||
LM4953SD![]() | Texas Instruments | Audio Amplifier, 1 Channel(s), 1 Func RoHS : Not Compliant | 4,111 | |||
LM4953SDX![]() | Texas Instruments | Audio Amplifier, 1 Channel(s), 1 Func RoHS : Not Compliant | 3,984 | |||
| 2904953 | Phoenix Contact | Special Relay RoHS : Compliant | 437 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |