 |
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
|
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
4021J8R2ABSTR Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
 ComSIT USA | 530140210 | Molex | 2.00MM PITCH WIRE-TO-BOARD HEADER Board Connector, 2 Contact(s), 1 Row(s), Male, Straight, 0.079 inch Pitch, Solder Terminal, Locking, Receptacle RoHS : Not Compliant | 84,000 | ||
| CRCW0402150KFKTDBC | Vishay Intertechnologies | Fixed Resistor, Metal Glaze/thick Film, 0.063W, 150000ohm, 50V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0402 RoHS : Compliant | 50,000 | |||
| TNPW04021K50FHED | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.07W, 1500ohm, 75V, 1% +/-Tol, 50ppm/Cel, Surface Mount, 0402 RoHS : Compliant | 30,000 | |||
| CRCW04021K00FKED | Vishay Intertechnologies | STANDARD THICK FILM CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.063W, 1000ohm, 50V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0402 RoHS : Compliant | 30,000 | |||
| CRCW0402150RFKTDBC | Vishay Intertechnologies | Fixed Resistor, Metal Glaze/thick Film, 0.063W, 150ohm, 50V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0402 RoHS : Compliant | 20,000 | |||
| CRCW0402120RFKED | Vishay Intertechnologies | STANDARD THICK FILM CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.063W, 120ohm, 50V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0402 RoHS : Compliant | 20,000 | |||
| CRCW040214K7FKED | Vishay Intertechnologies | STANDARD THICK FILM CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.063W, 14700ohm, 50V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0402 RoHS : Compliant | 10,000 | |||
| CRCW04021K43FKED | Vishay Intertechnologies | STANDARD THICK FILM CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.063W, 1430ohm, 50V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0402 RoHS : Compliant | 10,000 | |||
| CRCW0402178RFKED | Vishay Intertechnologies | Fixed Resistor, Metal Glaze/thick Film, 0.063W, 178ohm, 50V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0402 RoHS : Compliant | 8,841 | |||
| 4021YM013TR | STMicroelectronics | Electronic Component RoHS : Compliant | 7,355 | |||
| 17402108 | TE Connectivity | Photovoltaic Connector Converter Receptacle, Male Pin Minus RoHS : Not Compliant | 3,200 | |||
| SP402101FTGC | Littelfuse Inc | Trans Voltage Suppressor Diode, 600W, 5V V(RWM), Bidirectional, 1 Element, Silicon RoHS : Compliant | 640 | |||
| 4021BCM | Fairchild Semiconductor Corporation | Electronic Component RoHS : Not Compliant | 257 | |||
| T60405N4021X036 | vac | COMMON MODE CHOKE Data Line Filter, 4 Function(s), 0.3A RoHS : Not Compliant | 98 | |||
| 1,40211E+11 | Solitron Devices Inc | Electronic Component RoHS : Not Compliant | 18 | |||
 PEI Genesis | S4021R2510-34-2 | SOURIAU-SUNBANK |
| 0 | ||
| S4021S1006-34-2 | SOURIAU-SUNBANK |
| 0 | |||
| SE53F1820F4-021 | SOURIAU-SUNBANK |
| 0 | |||
| SE53F2816F4-021 | SOURIAU-SUNBANK |
| 0 | |||
| 03F4021B0904C | SOURIAU-SUNBANK |
| 0 | |||
| 21F4021R1712N | SOURIAU-SUNBANK |
| 0 | |||
| S4021R1304-34-1 | SOURIAU-SUNBANK |
| 0 | |||
| S4021S1308-34-2 | SOURIAU-SUNBANK |
| 0 | |||
| 135104-02-12.00 | Amphenol RF |
| 0 | |||
| 03F4021B0903C | SOURIAU-SUNBANK |
| 0 | |||
| 03F4021B1106CN | SOURIAU-SUNBANK |
| 0 | |||
| 03F4021R2310N-114 | SOURIAU-SUNBANK |
| 0 | |||
| S4021R2818-34-2 | SOURIAU-SUNBANK |
| 0 | |||
| S4021S0704-34-1 | SOURIAU-SUNBANK |
| 0 | |||
| S4021S1606-34-1 | SOURIAU-SUNBANK |
| 0 | |||
 PUI | 9A0912H4021 | Sanyo-Denki Co Ltd | RoHS : Compliant |
| 168 | |
 Chip 1 Exchange | 1206S4F4021T5E | ROYAL | INSTOCK | 179,816 | ||
| CRCW040211K0FKED | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 9,900 | |||
| CRCW04021K10FKED | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 9,784 | |||
| CRCW0402121RFK | Vishay Intertechnologies | INSTOCK | 9,778 | |||
| CRCW0402182RFKED | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 9,163 | |||
| CRCW0402118KFKED | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 7,881 | |||
| MCT0603MD4021BP100 | INSTOCK | 7,200 | ||||
| CRCW040215R0FKEDC | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 6,000 | |||
| CRCW0402182RFKED | INSTOCK | 3,789 | ||||
| CRCW040211K0FK### | Vishay Intertechnologies | INSTOCK | 3,784 | |||
| CRCW040219K6FK### | Vishay Intertechnologies | INSTOCK | 3,373 | |||
| CRCW040210K0JKTD | INSTOCK | 900 | ||||
| CRCW04021K24FK | Vishay Intertechnologies | INSTOCK | 347 | |||
| CRCW0402105KFKED | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 172 | |||
| CRCW040219K1FK | Vishay Intertechnologies | INSTOCK | 91 | |||
 Avnet Silica | BC807-40,215 | Nexperia | (Alt: BC807-40,215) RoHS : Compliant | 123,000 | ||
| BF840,215 | Nexperia | Trans GP BJT NPN 40V 0025A 3Pin TO236AB TR (Alt: BF840,215) RoHS : Compliant | 15,000 | |||
MC14021BDR2G | onsemi | Shift Register MC14021B Parallel to Serial Serial to Serial 1 Element 8 bit SOIC 16 Pins (Alt: MC14021BDR2G) RoHS : Compliant | 10,000 | |||
MCP4021-502E/SN | Microchip Technology Inc | Digital Potentiometer NonVolatile 5 kOhm Single 64 Steps 150 ppmC 27 V to 55 V 8 Pins (Alt: MCP4021-502E/SN) RoHS : Compliant | 200 | |||
| MP4021AGS-Z | Monolithic Power Systems | LED DRVR Flyback 1CH None 12A 8Pin SOIC TR (Alt: MP4021AGS-Z) RoHS : Compliant | 0 | |||
| ZL40214LDF1 | Microchip Technology Inc | (Alt: ZL40214LDF1) RoHS : Compliant | 0 | |||
| ZL40212LDG1 | Microchip Technology Inc | (Alt: ZL40212LDG1) RoHS : Compliant | 0 | |||
PBSS4021NX,115 | Nexperia | (Alt: PBSS4021NX,115) RoHS : Compliant | 0 | |||
PBSS4021SP,115 | Nexperia | Trans GP BJT PNP 20V 63A 8Pin SO TR (Alt: PBSS4021SP,115) RoHS : Compliant | 0 | |||
| MCP4021-503E/SN | Microchip Technology Inc | Digital Potentiometer NonVolatile 50 kOhm Single 64 Steps 150 ppmC 27 V to 55 V (Alt: MCP4021-503E/SN) RoHS : Compliant | 0 | |||
| RCLAMP4021ZATFT | Semtech Corporation | 1LINE 4V 045PF 012R ESD SLP0603P2X3F (Alt: RCLAMP4021ZATFT) RoHS : Compliant | 0 | |||
| PBSS4021SPN,115 | Nexperia | Trans GP BJT NPNPNP 20V 75A63A 8Pin SO TR (Alt: PBSS4021SPN,115) RoHS : Compliant | 0 | |||
| MCP4021T-502E/SN | Microchip Technology Inc | Digital Potentiometer NonVolatile 5 kOhm Single 64 Steps 150 ppmC 27 V to 55 V 8 Pins (Alt: MCP4021T-502E/SN) RoHS : Compliant | 0 | |||
| MCP4021T-202E/MS | Microchip Technology Inc | Digital Potentiometer NonVolatile 21 kOhm Single 64 Steps 150 ppmC 27 V to 55 V (Alt: MCP4021T-202E/MS) RoHS : Compliant | 0 | |||
MCP4021T-503E/MC | Microchip Technology Inc | Digital Potentiometer NonVolatile 50 kOhm Single 64 Steps 150 ppmC 27 V to 55 V (Alt: MCP4021T-503E/MC) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | ATFC-0402-13N8G-T | Abracon Corporation | RoHS : Compliant |
| 0 | |
| AIMC-Q0402-18NG-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AIMC-Q0402-1N3B-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ATFC-0402-1N8B-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AIMC-Q0402-1N0C-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-Q0402-10NK-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-Q0402-1N0K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ABNTC-0402-154J-4150F-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-Q0402-12NK-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-Q0402-1N9D-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ACML-0402-110-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ATFC-0402-1N7B-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ATFC-0402-1N6B-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AIMC-0402-10NJ-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-Q0402-18NK-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
 Component Electronics, Inc | CR0402-16W-3091FT | VENKEL LTD | IN STOCK SHIP TODAY RoHS : Compliant |
| 9,900 | |
| CRCW040217R4FKTD | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 9,330 | ||
| RM06F4021CTLF | Cal-Chip Electronics | IN STOCK SHIP TODAY |
| 8,700 | ||
| CRCW04021K20JNED | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 8,700 | ||
| RK73H2AT4021F | KOA Speer Electronics Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 3,981 | ||
| CRCW0402162RFKED | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,600 | ||
| CR0402-16W-4021FT | VENKEL LTD | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,300 | ||
| M39014/02-1320 | Kyocera AVX Components | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 363 | ||
| 131-1402-101 | Johnson Components | IN STOCK SHIP TODAY RoHS : Compliant |
| 100 | ||
| CRCW04021K27FKED | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 100 | ||
| 142-0694-021 | Vertiv Inc | IN STOCK SHIP TODAY |
| 77 | ||
| MS16633-4021 | ALATEC Inc | IN STOCK SHIP TODAY | 40 | |||
| M39014/02-1417 | Kyocera AVX Components | IN STOCK SHIP TODAY RoHS : Not Compliant | 10 | |||
| M39014/02-1357 | KEMET Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 5 | ||
| RNC55H4021FS | Vishay Dale | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 4 | ||
 DB Roberts | 24-20-402-10 | Southco | RoHS : Compliant | 0 | ||
| 0402119303E | Essentra Components | 0 | ||||
| 3402120702E | Essentra Components | 0 | ||||
| 0402126802E | Essentra Components | 0 | ||||
| 12014021 | Pop Rivets | PRG402-02 1 SET 2 EACH | 0 | |||
| 0402119302E | Essentra Components | 0 | ||||
| E3-104-021 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| PRG540-21 | Pop Rivets | NOSE HOUSING | 0 | |||
| RS-2514-0210 | Heyco | RS 0250 OD X140 ID X210 LG NAT | 0 | |||
| 2402110002E | Essentra Components | 0 | ||||
| 2402120002E | Essentra Components | 0 | ||||
| ES-Z402-128/AC | Sugatsune Kogyo Co Ltd | ESOR MATT ANTIQUE COPPER HANDL | 0 | |||
| 3402120001E | Essentra Components | 0 | ||||
| 0402116802E | Essentra Components | 0 | ||||
| 0402129402E | Essentra Components | 0 | ||||
 EBV Elektronik | MC14021BDR2G | onsemi | Shift Register MC14021B Parallel to Serial Serial to Serial 1 Element 8 bit SOIC 16 Pins (Alt: MC14021BDR2G) RoHS : Compliant | 132,500 | ||
SL3S4021FHKH | NXP Semiconductors | Passive Smart Tag and Label ICODE IC I2C 8 Pins XQFN EPC Gen2 v120 (Alt: SL3S4021FHKH) RoHS : Compliant | 8,000 | |||
| TC4021BP(N,F) | Toshiba America Electronic Components | CMOS Logic ICs (Alt: TC4021BP(N,F)) RoHS : Compliant | 925 | |||
| MC14021BDG | onsemi | Shift Register MC14021 Parallel to Serial 1 Element 8 bit SOIC 16 Pins (Alt: MC14021BDG) RoHS : Compliant | 816 | |||
| ZL40214LDG1 | Microchip Technology Inc | (Alt: ZL40214LDG1) RoHS : Compliant | 0 | |||
| ZL40212LDG1 | Microchip Technology Inc | (Alt: ZL40212LDG1) RoHS : Compliant | 0 | |||
| ZL40212LDF1 | Microchip Technology Inc | (Alt: ZL40212LDF1) RoHS : Compliant | 0 | |||
| ZL40213LDG1 | Microchip Technology Inc | (Alt: ZL40213LDG1) RoHS : Compliant | 0 | |||
| HCF4021YM013TR | STMicroelectronics | Shift Register HCF4021 Parallel to Serial Serial to Serial 1 Element 8 Bit 16 Pins SOIC (Alt: HCF4021YM013TR) RoHS : Compliant | 0 | |||
| MCP4021-503E/SN | Microchip Technology Inc | Digital Potentiometer NonVolatile 50 kOhm Single 64 Steps 150 ppmC 27 V to 55 V (Alt: MCP4021-503E/SN) RoHS : Compliant | 0 | |||
| MCP4021-202E/SN | Microchip Technology Inc | Digital Potentiometer NonVolatile 21 kOhm Single 64 Steps 150 ppmC 27 V to 55 V (Alt: MCP4021-202E/SN) RoHS : Compliant | 0 | |||
| MCP4021T-202E/MS | Microchip Technology Inc | Digital Potentiometer NonVolatile 21 kOhm Single 64 Steps 150 ppmC 27 V to 55 V (Alt: MCP4021T-202E/MS) RoHS : Compliant | 0 | |||
| MCP4021T-503E/MC | Microchip Technology Inc | Digital Potentiometer NonVolatile 50 kOhm Single 64 Steps 150 ppmC 27 V to 55 V (Alt: MCP4021T-503E/MC) RoHS : Compliant | 0 | |||
| MCP4021T-502E/MS | Microchip Technology Inc | Digital Potentiometer NonVolatile 5 kOhm Single 64 Steps 150 ppmC 27 V to 55 V 8 Pins (Alt: MCP4021T-502E/MS) RoHS : Compliant | 0 | |||
| ANTENNA GW.40.2153 | Taoglas Antenna Solutions | Taoglas Antenna GW402153 for Fronius Dipole Antenna Terminal Antenna 2 (Alt: ANTENNA GW.40.2153) RoHS : Compliant | 0 | |||
 ECCO | 051524-0216 | ITT Interconnect Solutions | RoHS : Not Compliant |
| 26 | |
 Flip Electronics | MC14021BDG | onsemi | Stock, Ship Today RoHS : Compliant |
| 4,944 | |
| MCH4021-TL-E | onsemi | Stock, Ship Today RoHS : Compliant |
| 3,000 | ||
 Pasternack Enterprises US | PE3402-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm, Length: 18 inches. TNC Male to TNC Male Cable 18 Inch Length Using 75 Ohm RG59 Coax., Radio frequency assembly TNC male to TNC male cable 18 inch length using 75 Ohm RG59 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to TNC male cable 18 inch length using 75 Ohm RG59 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to TNC cable is a male to male coax assembly, PE3402-18, can also be known as a TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3402-18 is built with RG59 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male cable 18 inch length using 75 Ohm RG59 coax. |
| 147 | |
| PE3402-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm, Length: 12 inches. TNC Male to TNC Male Cable 12 Inch Length Using 75 Ohm RG59 Coax., Radio frequency assembly TNC male to TNC male cable 12 inch length using 75 Ohm RG59 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to TNC male cable 12 inch length using 75 Ohm RG59 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to TNC cable is a male to male coax assembly, PE3402-12, can also be known as a TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3402-12 is built with RG59 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male cable 12 inch length using 75 Ohm RG59 coax. |
| 147 | ||
| TC-402-1023M-LP | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: 1.0/2.3, Connector Gender: Plug, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: TFT-402, Interface Type 2: TFT-402-LF. 1.0/2.3 Plug Low PIM Connector Solder Attachment for TFT-402, TFT-402-LF. TC-402-1023M-LP 1.0/2.3 plug coaxial connector has an interface type of TFT-402, TFT-402-LF and a 50 Ohm impedance. Pasternack 1.0/2.3 plug connector uses shield/contact solder/solder as an attachment method. Our plug 1.0/2.3 coaxial connector provides a minimum frequency of DC and a maximum frequency of 6 GHz. The Pasternack 1.0/2.3 plug coaxial connector has a PTFE dielectric type and a VSWR of 1.3. The Pasternack 1.0/2.3 coaxial connector has a brass body with tri-metal plating. Our TC-402-1023M-LP 1.0/2.3 connector uses brass contact. This 1.0/2.3 plug coaxial RF connector is RoHS and REACH compliant. This Pasternack plug 1.0/2.3 connector will ship the same day as purchased. Our 1.0/2.3 plug connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom 1.0/2.3 connector cable assemblies that will ship the same day as well. |
| 138 | ||
| PE3W08402-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm, Length: 59.05 inches. SMA Male to SSMC Plug Right Angle Cable 150 cm Using RG188-DS Coax., Radio frequency assembly SMA male to SSMC plug right angle cable 150 cm using RG188-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SSMC plug right angle cable 150 cm using RG188-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SSMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SSMC cable connection on the other. Our SMA to right angle SSMC cable assemblies have a male gender on end 1 and plug on end 2. This SMA to SSMC cable is a male to plug coax assembly, PE3W08402-150CM, can also be known as a SMA plug to right angle SSMC male cable assembly and will be shipped same-day as it is purchased. SMA plug to SSMC male cable assembly PE3W08402-150CM is built with RG188-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SSMC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 10 GHz maximum frequency SMA male to SSMC right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08402-150CM can also be used in the other direction and will be right angle SSMC plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to SSMC right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SSMC plug right angle cable 150 cm using RG188-DS coax. |
| 71 | ||
| PE3W08402-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm, Length: 18 inches. SMA Male to SSMC Plug Right Angle Cable 18 Inch Using RG188-DS Coax., Radio frequency assembly SMA male to SSMC plug right angle cable 18 inch using RG188-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SSMC plug right angle cable 18 inch using RG188-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SSMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SSMC cable connection on the other. Our SMA to right angle SSMC cable assemblies have a male gender on end 1 and plug on end 2. This SMA to SSMC cable is a male to plug coax assembly, PE3W08402-18, can also be known as a SMA plug to right angle SSMC male cable assembly and will be shipped same-day as it is purchased. SMA plug to SSMC male cable assembly PE3W08402-18 is built with RG188-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SSMC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 10 GHz maximum frequency SMA male to SSMC right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08402-18 can also be used in the other direction and will be right angle SSMC plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to SSMC right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SSMC plug right angle cable 18 inch using RG188-DS coax. |
| 71 | ||
| PE3C10402-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240-FR, RF Cable Type: TCOM-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Fire Rated TNC Male Right Angle to TNC Male Right Angle Low Loss Cable 12 Inch Length Using TCOM-240-FR Coax With Times Microwave Components., Radio frequency assembly fire rated TNC male right angle to TNC male right angle low loss cable 12 inch length using TCOM-240-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated TNC male right angle to TNC male right angle low loss cable 12 inch length using TCOM-240-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with right angle a TNC cable connection on one end and right angle a TNC cable connection on the other. Our low loss right angle a TNC to right angle a TNC cable assembly has male gender on end 1 and male on end 2. PE3C10402-12 can also be known as a low loss right angle TNC plug to right angle TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10402-12 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 100 dB. TNC plug to TNC plug cable assembly PE3C10402-12 is built with TCOM-240-FR which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle TNC cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss TNC right angle plug to TNC right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. |
| 64 | ||
| PE3FCA402-10M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM1, Fiber Diameter: 62.5/125, Cable Assembly Color: Orange, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 6.2 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 12-Fiber LC UPC to SC UPC, OM1 Multimode Distribution Cable, 6.2mm LSZH, 2.0mm breakout, Orange-10M. Pasternack’s PE3FCA402-10M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long 12-fiber cable assembly is equipped with LC/UPC to SC/UPC connectors. Our orange fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM1 fiber that provides 100 Mb Ethernet support and 10 Gb Ethernet up to 33 meters with a 62.5/125µm core size and an LED light source. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA402-10M fiber optic cable with a 6.2 mm cable diameter and 62 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is engineered for low attenuation and high durability, and the tight buffered fiber with aramid yarn reinforcement ensures exceptional performance in demanding network environments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM1 multimode fiber optic cable that meets your requirements. |
| 56 | ||
| PE3FCA402-15M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM1, Fiber Diameter: 62.5/125, Cable Assembly Color: Orange, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 6.2 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 12-Fiber LC UPC to SC UPC, OM1 Multimode Distribution Cable, 6.2mm LSZH, 2.0mm breakout, Orange-15M. Pasternack’s PE3FCA402-15M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 15-meter long 12-fiber cable assembly is equipped with LC/UPC to SC/UPC connectors. Our orange fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM1 fiber that provides 100 Mb Ethernet support and 10 Gb Ethernet up to 33 meters with a 62.5/125µm core size and an LED light source. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA402-15M fiber optic cable with a 6.2 mm cable diameter and 62 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is engineered for low attenuation and high durability, and the tight buffered fiber with aramid yarn reinforcement ensures exceptional performance in demanding network environments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM1 multimode fiber optic cable that meets your requirements. |
| 56 | ||
| PE44021 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: SMA, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Field Replaceable, Mount Method: 4 Hole Flange, Interface Type 1: .020 inch Pin. SMA Male Connector Field Replaceable Attachment 4 Hole Flange 0.020 inch Pin, .500 inch Flange Size. PE44021 SMA male 4 hole flange connector has an interface type of .020 inch pin and a 50 Ohm impedance. Pasternack SMA male 4 hole flange connector uses shield/contact as an attachment method. The Pasternack SMA male 4 hole flange connector has a PTFE dielectric type. The Pasternack SMA connector has a passivated stainless steel body. This SMA male 4 hole flange RF connector is REACH compliant. This Pasternack male SMA 4 hole flange connector will ship the same day as purchased. Our 4 hole flange SMA male connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom SMA connector cable assemblies that will ship the same day as well. |
| 12 | ||
| PE7AP402-10 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 10 Watt, VSWR Maximum: 1.5:1, Attenuation: 10 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 10 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Directional Black Anodized Aluminum Heatsink Body Rated to 10 Watts Up to 40 GHz. PE7AP402-10 is a fixed 10 dB attenuator from Pasternack. This 10dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7AP402-10 10 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 10 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP402-10 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 10dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 10 | ||
| PE15A4021 | Pasternack Enterprises | Key Specifications, Frequency, Min: 18 GHz, Frequency, Max: 26.5 GHz, Gain, Min: 30 dB, Gain, Typical: 33 dB, Gain Flatness: 1.75 dB, 1dB Compression Point, Min: 30 dBm, 3rd Intercept Point, Typ: 38 dB, 3rd Intercept Point, Min: 37 dB, Voltage, DC Max: 12 Volts, Current, DC Typ: 2,200 mA. 1 Watt P1dB, 18 GHz to 26.5 GHz, Medium Power GaAs Amplifier, 2.92mm Input, 2.92mm Output, 33 dB Gain, 38 dBm IP3, 5 dB NF. RF solid state power amplifier (SSPA) PE15A4021 from Pasternack is part of the largest selection of in-stock radio frequency microwave and millimeter wave amplifiers available for same-day shipment. This Pasternack solid state RF power amplifier is a medium power amp design constructed in a connectorized package. Our SSPA is designed with 2.92mm connectors and rated at 1 Watt. Pasternack solid state power amplifier part number PE15A4021 2.92mm medium power amp has a 30 dB minimum gain and 33 dB typical gain. The medium power medium gain amp is rated for a gain flatness of 1.75 dB with a P1dB of 31 dBm. Our radio frequency medium power solid state amplifier is constructed for minimum frequency of 18 GHz and a maximum frequency of 26.5 GHz. Additional radio frequency specs on this high frequency medium gain medium power solid state power amplifier from Pasternack can be found in the details on the RF power amplifier datasheet specifications PDF above. Our medium power medium gain HF amplifier is part of over one 40,000 RF, microwave and millimeter wave components in-stock. This medium power 1 Watt radio frequency amplifier is ready for same day purchase and shipping worldwide. Pasternack also stocks a wide range of other radio signal SSPAs that ship same-day from our facility for all your RF, microwave and millimeter wave amplifier component needs. |
| 1 | ||
| PE3W04021 | Pasternack Enterprises | Key Specifications, Connector Series 1: FME, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. FME Jack to UHF Male Cable Using RG58 Coax. PE3W04021 is a FME jack to UHF male cable using RG58 coax. This Pasternack FME jack to UHF male cable assembly uses a 50 Ohm FME for connector 1 and a 50 Ohm UHF for connector 2. Our jack FME to male UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04021 FME jack to UHF male cable assembly is constructed with RG58 coax. | 0 | |||
| PE3C4021-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 6 inches. Snap-On MMBX Plug to Reverse Polarity SMA Female Bulkhead Cable 6 Inch Length Using RG316 Coax., Radio frequency assembly snap-on MMBX plug to reverse polarity SMA female bulkhead cable 6 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on MMBX plug to reverse polarity SMA female bulkhead cable 6 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMBX to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MMBX cable connection on one end and reverse polarity SMA bulkhead cable connection on the other. Our MMBX to reverse polarity SMA cable assemblies have a plug gender on end 1 and female on end 2. This MMBX to reverse polarity SMA cable is a plug to female coax assembly, PE3C4021-6, can also be known as a MMBX male to reverse polarity SMA jack cable assembly and will be shipped same-day as it is purchased. MMBX male to reverse polarity SMA jack cable assembly PE3C4021-6 is built with RG316 which is a flexible coax type. The Pasternack flexible MMBX cable assembly is manufactured with MMBX to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency MMBX plug to reverse polarity SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4021-6 can also be used in the other direction and will be reverse polarity SMA female bulkhead to MMBX plug cable assembly if the opposite connectivity is required. MMBX male to SMA reverse polarity jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMBX to SMA cable assembly for quick shipment worldwide. Variations of MMBX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on MMBX plug to reverse polarity SMA female bulkhead cable 6 inch length using RG316 coax. |
| 0 | ||
| PE3W24021 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. SMA Female 2 Hole Flange to SMA Male Cable Using PE-P086HF Coax. PE3W24021 is a SMA female 2 hole flange to SMA male cable using PE-P086HF coax. This Pasternack SMA female 2 hole flange to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA 2 hole flange to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24021 SMA female 2 hole flange to SMA male cable assembly is constructed with PE-P086HF coax. | 0 | |||
| PE3MSA00402-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TWCH-78-2, RF Cable Type: TWCH-78-2, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. Halogen Free 3-Lug TRB Bulkhead Insulated Jack with Blunt Cut for 78 Ohm TWCH-78-2, 12" Cable., Radio frequency assembly halogen free 3-Lug TRB bulkhead insulated jack with blunt cut for 78 Ohm TWCH-78-2, 12" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Halogen free 3-Lug TRB bulkhead insulated jack with blunt cut for 78 Ohm TWCH-78-2, 12" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB bulkhead cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MSA00402-12 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MSA00402-12 is built with TWCH-78-2 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack bulkhead to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00402-12 can also be used in the other direction and will be blunt cut genderless to TRB jack bulkhead cable assembly if the opposite connectivity is required. 1553 TRB female bulkhead to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this halogen free 3-Lug TRB bulkhead insulated jack with blunt cut for 78 Ohm TWCH-78-2, 12" cable. |
| 0 | ||
 Venkel Ltd. | CR0402-16W-4021FT | VENKEL LTD | Chip Resistor;0402;1/16W;4.02K;�1% RoHS : Compliant | 130,000 | ||
| CR0402-16W-4021DT | VENKEL LTD | Chip Resistor;0402;1/16W;4.02K;�0.5% RoHS : Compliant | 30,000 | |||
| TFCR0402-16W-E-4021BT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�25PPM;4.02K;�0.1% RoHS : Compliant | 7,000 | |||
| UPTF0402-16W-E-4021AT | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�25PPM;4.02K;�0.05% RoHS : Compliant | 0 | |||
| CR0402-10W-4021FT | VENKEL LTD | Chip Resistor;0402;1/10W;4.02K;�1% RoHS : Compliant | 0 | |||
| TFCR0402-16W-E-4021DT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�25PPM;4.02K;�0.5% RoHS : Compliant | 0 | |||
| UPTF0402-16W-P-4021CT | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;4.02K;�0.25% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-4021CT | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;4.02K;�0.25% RoHS : Compliant | 0 | |||
| UPTF0402-16W-P-4021DT | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;4.02K;�0.5% RoHS : Compliant | 0 | |||
| TFCR0402-16W-K-4021CT | VENKEL LTD | Thin Film CR;0402;1/16W;�100PPM;4.02K;�0.25% RoHS : Compliant | 0 | |||
| UPTF0402-16W-N-4021AT | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�10PPM;4.02K;�0.05% RoHS : Compliant | 0 | |||
| TFCR0402-16W-K-4021DT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�100PPM;4.02K;�0.5% RoHS : Compliant | 0 | |||
| UPTF0402-16W-P-4021AT | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;4.02K;�0.05% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-4021DT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;4.02K;�0.5% RoHS : Compliant | 0 | |||
| TFCR0402-16W-K-4021BT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�100PPM;4.02K;�0.1% RoHS : Compliant | 0 | |||
 Vyrian | Y40212K00000B9W | Vishay Precision Group Inc | Fixed Resistor, Metal Foil, 0.1W, 2000ohm, 22V, 0.1% +/-Tol, 0.2ppm/Cel, Surface Mount, 0603 | 14,014 | ||
| PBSS4021SN,118 | Nexperia | Small Signal Bipolar Transistor, 7.5A I(C), 20V V(BR)CEO, 2-Element, NPN, Silicon | 13,123 | |||
| PBSS4021NT | Nexperia | Small Signal Bipolar Transistor, 4.3A I(C), 20V V(BR)CEO, 1-Element, NPN, Silicon, TO-236AB RoHS : Compliant | 11,768 | |||
M27W402-100B6 | STMicroelectronics | OTP ROM, 256KX16, 100ns, CMOS, PDIP40 RoHS : Compliant | 9,480 | |||
| HCC4021BD | STMicroelectronics | 9,410 | ||||
| THS4021EVM | Texas Instruments | 6,666 | ||||
| TP4021AN | Texas Instruments | Shift Register, 8-Bit, CMOS, PDIP16 RoHS : Not Compliant | 6,353 | |||
| XCVP1402-1GLIVFVC1760 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 3,182 | |||
| XCVP1402-1MSEVSVD2197-ES9699 | AMD Xilinx | 2,636 | ||||
| XCVM1402-1LSEVFVB1024 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 2,587 | |||
| XCVP1402-1GSIVFVC1760 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 1,238 | |||
| 135104-02-12.00 | Amphenol Corporation | Interconnection Device RoHS : Compliant | 807 | |||
| MC0.0625W04021%1K15 | Multicomp Pro | Fixed Resistor, Metal Glaze/thick Film, 0.0625W, 1150ohm, 50V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0402 | 756 | |||
| RCA0402140KFKED | Vishay Intertechnologies | Fixed Resistor, Metal Glaze/thick Film, 0.063W, 140000ohm, 50V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0402 RoHS : Compliant | 610 | |||
| L104021MS02Q | C & K Components | Slide Switch, 1 Positions, SP4T, Latched, 4A, 28VDC, Solder Terminal, Through Hole-straight | 596 | |||
 Waytek, Inc. | 320-402-10 | MP | Short Stop Circuit Breaker Copper Bus Bar, 10 Position |
| 1,171 | |
| 320-402-12 | MP | Short Stop Circuit Breaker Copper Bus Bar, 12 Position |
| 554 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Spanish ▼ 
English
Chinese
German
Japanese
Russian
Korean
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand