 |
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
|
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
3418L-AE3-R Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
 ComSIT USA | T60023418R | VENTURE CORPORATION LTD | AVAILABLE EU | 203 | ||
| SQ3418AEEVT1GE3 | Vishay Intertechnologies | AVAILABLE EU | 6,746 | |||
ComSIT USA | MT2C93418 | TE Connectivity | MINIATURE RELAY, 2 POLES (FOR SIGNAL SWITCHING) Power/Signal Relay, DPDT, Momentary, 0.013A (Coil), 12VDC (Coil), 150mW (Coil), 1A (Contact), 60VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount RoHS : Not Compliant | 1,494 | ||
| F17734182000 | Vishay Intertechnologies | INTERFERENCE SUPPRESSION FILM CAPACITOR Film Capacitor, Polyester, 630V, 10% +Tol, 10% -Tol, 0.18uF, Through Hole Mount RoHS : Compliant | 1,000 | |||
| AO3418 | Alpha & Omega Semiconductor | 30V N-Channel MOSFET Power Field-Effect Transistor, 3.8A I(D), 30V, 0.055ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 28 | |||
 Powell Electronics | CSL-03418P-9 | TE Connectivity | Connectors RoHS : Compliant |
| 11,558 | |
| 77313-418-20LF | Amphenol FCi | Cable Assembly RoHS : Unknown |
| 7,260 | ||
| 8-53418-1 | TE Connectivity | Terminals RoHS : Not Compliant |
| 459 | ||
| AHDC34-18 | Amphenol Sine Systems | Shell Sz 18 Protective Cap for Plugs |
| 198 | ||
| 87-528334-18S | Amphenol Corporation | RECEPT |
| 25 | ||
| 87-463034-18P | Amphenol Corporation | RECEPT |
| 21 | ||
| MS3418-20A | Glenair Inc | STRAIN RELIEF/CLAMPS |
| 14 | ||
| MS3418-24N | Glenair Inc | STRAIN RELIEF/CLAMPS |
| 12 | ||
| 91-542634-18R | Amphenol Corporation | RECEPT |
| 11 | ||
| 13418 | Heyco | BRASS TP PG 29 |
| 7 | ||
| 9341-80006 | Amphenol SV Microwave | NanoRF VITA 67.3 20 Port RF and 2 Port M RoHS : Compliant |
| 3 | ||
| 87-463034-18T | Amphenol Corporation | RECEPT |
| 2 | ||
| 87-463034-18R | Amphenol Corporation | RECEPT |
| 2 | ||
| 88-463034-18F | Amphenol Corporation | RECEPT |
| 1 | ||
| 803418-SF | TE Connectivity | Connectors RoHS : Compliant |
| 1 | ||
 Chip 1 Exchange | PA4341.821ANLT | YAGEO Corporation | INSTOCK RoHS : Compliant | 41,600 | ||
| MC34181DR2 | INSTOCK | 20,038 | ||||
| C93418 | TE Connectivity | INSTOCK RoHS : Compliant | 10,428 | |||
| SQ3418EV-T1_GE3 | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 3,900 | |||
| HDC34-18-L020 | TE Connectivity | INSTOCK RoHS : Compliant | 2,936 | |||
| 203263-4185 | Molex | INSTOCK | 2,320 | |||
| 1534180-2 | TE Connectivity | INSTOCK RoHS : Compliant | 2,054 | |||
| 43418860- | Taica Corporation | INSTOCK | 2,000 | |||
| 734-18,6-07/04-10-00 | W+P Products GmbH | INSTOCK | 500 | |||
| 734-18,6-09/05-10-00 | W+P Products GmbH | INSTOCK | 305 | |||
| JAN2N3418 | INSTOCK | 128 | ||||
| 1D49341-85 | INSTOCK | 10 | ||||
 Avnet Abacus | 6473418-2 | TE Connectivity | Automotive Connector SUPERSEAL Series Straight Header 26 Contacts PCB Pin (Alt: 6473418-2) RoHS : Compliant | 952 | ||
| 6473418-2 | TE Connectivity | Automotive Connector SUPERSEAL Series Straight Header 26 Contacts PCB Pin (Alt: 6473418-2) RoHS : Compliant | 374 | |||
| 77313-418-72LF | Amphenol Corporation | Conn Unshrouded Header HDR 72 POS 254mm Solder ST ThruHole Poly Bag (Alt: 77313-418-72LF) RoHS : Compliant | 300 | |||
| 1743418 | Phoenix Contact | DMCV 15 6G1F35LR P35 BK DMCV156G1F35LRP35BK (Alt: 1743418) | 0 | |||
| NB3418-000 | TE Connectivity | SCL180BULKCOIL (Alt: NB3418-000) RoHS : Compliant | 0 | |||
| 9341-80006 | Amphenol Corporation | (Alt: 9341-80006) RoHS : Compliant | 0 | |||
| HD34-18-8SN | TE Connectivity | Connector Bayonet Coupling Housing Socket 8 Position Receptacle 18 Shell Size 6061T6 Aluminum Alloy (Alt: HD34-18-8SN) RoHS : Compliant | 0 | |||
| HD34-18-8SN | TE Connectivity | Connector Bayonet Coupling Housing Socket 8 Position Receptacle 18 Shell Size 6061T6 Aluminum Alloy (Alt: HD34-18-8SN) RoHS : Compliant | 0 | |||
| HD34-18-20SN | TE Connectivity | Conn Circular Housing Inline Receptacle SKT 20 POS 18 Shell Size Aluminum Alloy Box (Alt: HD34-18-20SN) RoHS : Compliant | 0 | |||
| HD34-18-20SN | TE Connectivity | Conn Circular Housing Inline Receptacle SKT 20 POS 18 Shell Size Aluminum Alloy Box (Alt: HD34-18-20SN) RoHS : Compliant | 0 | |||
| HD34-18-21PN-072 | TE Connectivity | Connector Bayonet Coupling Housing PIN 21 Position Receptacle 18 Shell Size 6061T6 Aluminum Alloy (Alt: HD34-18-21PN-072) RoHS : Compliant | 0 | |||
| HD34-18-21PN-072 | TE Connectivity | Connector Bayonet Coupling Housing PIN 21 Position Receptacle 18 Shell Size 6061T6 Aluminum Alloy (Alt: HD34-18-21PN-072) RoHS : Compliant | 0 | |||
| HD34-18-8SE-L006 | TE Connectivity | (Alt: HD34-18-8SE-L006) RoHS : Not Compliant | 0 | |||
| HD34-18-8SE-L006 | TE Connectivity | (Alt: HD34-18-8SE-L006) RoHS : Compliant | 0 | |||
| HD34-18-14SN-L006 | TE Connectivity | (Alt: HD34-18-14SN-L006) RoHS : Compliant | 0 | |||
 Avnet Asia | PA4341.822BNLT | Pulse Electronics Corporation | POWER INDUCTOR (Alt: PA4341.822BNLT) RoHS : Compliant |
| 3,000 | |
| 10163418-0832002LF | Amphenol Corporation | FCI10163418-0832002LF BERGSTAK 0.5HS P2 (Alt: 10163418-0832002LF) RoHS : Compliant | 0 | |||
| 10163418-0F11002LF | Amphenol Corporation | FCI10163418-0F11002LF SMD B2B BERGSTAK P (Alt: 10163418-0F11002LF) RoHS : Compliant | 0 | |||
| N23418-001 | Hewlett Packard Co | HP Z8 G5 FURY PSU 1125W FULL HEIGHT (Alt: N23418-001) RoHS : Compliant | 0 | |||
| 10163418-0213002LF | Amphenol Corporation | (Alt: 10163418-0213002LF) RoHS : Compliant | 0 | |||
| 10163418-0412002LF | Amphenol Corporation | FCI10163418-0412002LF BTB,BERGSTAK 0.5MM (Alt: 10163418-0412002LF) RoHS : Compliant | 0 | |||
| 803418-SF | TE Connectivity | (Alt: 803418-SF) RoHS : Compliant | 0 | |||
 Avnet Silica | HV3418PG-G | Microchip Technology Inc | SerialParallel Converter 80Pin PQFP (Alt: HV3418PG-G) RoHS : Compliant | 0 | ||
| DMG3418L-7 | Diodes Incorporated | (Alt: DMG3418L-7) RoHS : Compliant | 0 | |||
| MP3418GJ-P | Monolithic Power Systems | Conv DCDC Single Step Up 06V to 4V 8Pin TSOT23 TR (Alt: MP3418GJ-P) RoHS : Compliant | 0 | |||
| MP3418GJ-Z | Monolithic Power Systems | Conv DCDC Single Step Up 06V to 4V 8Pin TSOT23 TR (Alt: MP3418GJ-Z) RoHS : Compliant | 0 | |||
| DMG3418LQ-7 | Diodes Incorporated | (Alt: DMG3418LQ-7) RoHS : Compliant | 0 | |||
| DMG3418L-13 | Diodes Incorporated | (Alt: DMG3418L-13) RoHS : Compliant | 0 | |||
| ISL23418UFUZ | Renesas Electronics Corporation | (Alt: ISL23418UFUZ) RoHS : Compliant | 0 | |||
 DB Roberts | 3418 | Heyco | TP PG 29 GRAY | 0 | ||
| RP-348-341-870 | SHEREX FASTENING SO | 0 | ||||
| 13418 | Heyco | BRASS TP PG 29 | 0 | |||
| 34180 | Essentra Components | 0 | ||||
| 8341-832-A-24 | RAF Electronic Hardware | 0 | ||||
| 3418B | Heyco | TP PG 29 BLACK | 0 | |||
| 8341-832-SS-20 | RAF Electronic Hardware | 0 | ||||
| H160-C34/18 | Sugatsune Kogyo Co Ltd | CONCEALED HINGE | 0 | |||
| H160-34/18 | Sugatsune Kogyo Co Ltd | CONCEALED HINGE | 0 | |||
| 20834180 | Essentra Components | 0 | ||||
| 8341-832-SS | RAF Electronic Hardware | OVAL INTERNAL THREAD HANDLE | 0 | |||
 EBV Elektronik | HV3418PG-G | Microchip Technology Inc | SerialParallel Converter 80Pin PQFP (Alt: HV3418PG-G) RoHS : Compliant | 0 | ||
| SQ3418EV-T1_GE3 | Vishay Intertechnologies | (Alt: SQ3418EV-T1_GE3) RoHS : Compliant | 0 | |||
| SQ3418AEEV-T1_GE3 | Vishay Intertechnologies | (Alt: SQ3418AEEV-T1_GE3) RoHS : Compliant | 0 | |||
| SGM2034-1.8YN3G/TR | SG Micro Corp | (Alt: SGM2034-1.8YN3G/TR) RoHS : Compliant | 0 | |||
 FDH Electronics | 523/4/18243/000 | BTC-Customer Drawing "DWG" | Connector Misc | 155,849 | ||
| M22759/34-18-9 | Nexans | Hook-Up Wire |
| 284 | ||
| M22759/34-18-9 | Marmon Aerospace & Defense | Hook-Up Wire |
| 267 | ||
| M22759/34-18-9 | TE Connectivity | Hook-Up Wire RoHS : Compliant | 44 | |||
| 1315-034-1806 | Aero-Electric Connector Inc | Connector Acc | 35 | |||
| S2834-1812-3 | SOURIAU-SUNBANK | Backshells & Ac | 8 | |||
| S2834-1820-2 | SOURIAU-SUNBANK | Backshells & Ac | 2 | |||
| 9341-80006 | Amphenol SV Microwave | Connector Misc RoHS : Compliant | 0 | |||
| M85049/34-18W | Amphenol PCD | Backshells & Ac | 0 | |||
| M85049/34-18W | Glenair Inc | Connector RoHS : Not Compliant | 0 | |||
| M85049/34-18Z | Amphenol PCD | Backshells & Ac | 0 | |||
| M85049/34-18Z | Glenair Inc | Connector RoHS : Compliant | 0 | |||
| 9341-80005 | Amphenol SV Microwave | Connector Misc | 0 | |||
| 83418-00006810-05 | Honeywell Sensing and Control | Switches |
| 0 | ||
| 031-34181-2 | Amphenol RF | Connector |
| 0 | ||
 Flip Electronics | 2SK3418-E | Renesas Electronics Corporation | Stock RoHS : Compliant | 498 | ||
 Maritex | AO3418 | VBsemi Electronics Co Ltd | Transistor: N-MOSFET; unipolar; 30V; 6.5A; 0.030ohm; 1.7W; -55+150 st.C; SMD; SOT23 |
| 943 | |
| HD34-18-14SE-059 | TE Connectivity | Automotive Connectors; HD34-18-14SE-059; TE CONNECTIVITY; Blue; 14; 81.7118 mm RoHS : Compliant |
| 9 | ||
 Pasternack Enterprises US | PE3W03418 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. Snap-On MMBX Plug Right Angle to SMA Female Bulkhead Cable Using RG178 Coax. PE3W03418 is a MMBX plug right angle to SMA female bulkhead cable using RG178 coax. This Pasternack MMBX plug right angle to SMA female bulkhead cable assembly uses a 50 Ohm MMBX for connector 1 and a 50 Ohm SMA for connector 2. MMBX right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMBX right angle to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03418 MMBX plug right angle to SMA female bulkhead cable assembly is constructed with RG178 coax. | 1,758 | ||
| PE34186-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to SMA Male Cable 36 Inch Length Using PE-SR047FL Coax., Radio frequency assembly SMA male to SMA male cable 36 inch length using PE-SR047FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male cable 36 inch length using PE-SR047FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE34186-36, can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE34186-36 is built with PE-SR047FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 36 inch length using PE-SR047FL coax. |
| 235 | ||
| PE34186LF-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to SMA Male Cable 36 Inch Length Using PE-SR047FL Coax, RoHS., Radio frequency assembly SMA male to SMA male cable 36 inch length using PE-SR047FL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male cable 36 inch length using PE-SR047FL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE34186LF-36, can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE34186LF-36 is built with PE-SR047FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 36 inch length using PE-SR047FL coax, RoHS. |
| 235 | ||
| PE3418/HS | Pasternack Enterprises | 0 | ||||
| PE34180LF-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to SMA Male Cable 36 Inch Length Using PE-SR402AL Coax., Radio frequency assembly SMA male to SMA male cable 36 inch length using PE-SR402AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male cable 36 inch length using PE-SR402AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE34180LF-36, can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE34180LF-36 is built with PE-SR402AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 36 inch length using PE-SR402AL coax. |
| 0 | ||
| PE34182 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50. SMA Male to SMA Male Cable Using PE-SR405AL Coax. PE34182 is a SMA male to SMA male cable using PE-SR405AL coax. This Pasternack SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to male SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE34182 SMA male to SMA male cable assembly is constructed with PE-SR405AL coax. | 0 | |||
| PE34182-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length: 18 inches. SMA Male to SMA Male Cable 18 Inch Length Using PE-SR405AL Coax., Radio frequency assembly SMA male to SMA male cable 18 inch length using PE-SR405AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male cable 18 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE34182-18, can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE34182-18 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 18 inch length using PE-SR405AL coax. |
| 0 | ||
| PE34182LF-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male to SMA Male Cable 48 Inch Length Using PE-SR405AL Coax., Radio frequency assembly SMA male to SMA male cable 48 inch length using PE-SR405AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male cable 48 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE34182LF-48, can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE34182LF-48 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 48 inch length using PE-SR405AL coax. |
| 0 | ||
| PE34182LF-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length: 6 inches. SMA Male to SMA Male Cable 6 Inch Length Using PE-SR405AL Coax., Radio frequency assembly SMA male to SMA male cable 6 inch length using PE-SR405AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male cable 6 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE34182LF-6, can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE34182LF-6 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 6 inch length using PE-SR405AL coax. |
| 0 | ||
| PE34183-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to N Female Bulkhead Cable 12 Inch Length Using RG393 Coax., Radio frequency assembly SMA male to N female bulkhead cable 12 inch length using RG393 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to N female bulkhead cable 12 inch length using RG393 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and type N bulkhead cable connection on the other. Our SMA to type N cable assemblies have a male gender on end 1 and female on end 2. This SMA to type N cable is a male to female coax assembly, PE34183-12, can also be known as a SMA plug to N type jack cable assembly and will be shipped same-day as it is purchased. SMA plug to type N jack cable assembly PE34183-12 is built with RG393 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 11 GHz maximum frequency SMA male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34183-12 can also be used in the other direction and will be type N female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N female bulkhead cable 12 inch length using RG393 coax. |
| 0 | ||
| PE34184-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401AL-STRAIGHT, RF Cable Type: PE-SR401AL-STRAIGHT, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to SMA Male Cable 60 Inch Length Using PE-SR401AL Coax., Radio frequency assembly SMA male to SMA male cable 60 inch length using PE-SR401AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male cable 60 inch length using PE-SR401AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE34184-60, can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE34184-60 is built with PE-SR401AL-STRAIGHT which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 60 inch length using PE-SR401AL coax. |
| 0 | ||
| PE34180LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50. SMA Male to SMA Male Cable Using PE-SR402AL Coax. PE34180LF is a SMA male to SMA male cable using PE-SR402AL coax. This Pasternack SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to male SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE34180LF SMA male to SMA male cable assembly is constructed with PE-SR402AL coax and the maximum VSWR is 1.4:1. | 0 | |||
| PE34183LF-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length: 6 inches. SMA Male to N Female Bulkhead Cable 6 Inch Length Using RG393 Coax, RoHS., Radio frequency assembly SMA male to N female bulkhead cable 6 inch length using RG393 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to N female bulkhead cable 6 inch length using RG393 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and N type bulkhead cable connection on the other. Our SMA to type N cable assemblies have a male gender on end 1 and female on end 2. This SMA to type N cable is a male to female coax assembly, PE34183LF-6, can also be known as a SMA plug to N type jack cable assembly and will be shipped same-day as it is purchased. SMA plug to type N jack cable assembly PE34183LF-6 is built with RG393 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 11 GHz maximum frequency SMA male to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34183LF-6 can also be used in the other direction and will be type N female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N female bulkhead cable 6 inch length using RG393 coax, RoHS. |
| 0 | ||
| PE34188 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: PE-SR401FL, RF Cable Type: PE-SR401FL, RF Cable Impedance: 50. SMA Male to SMA Male Cable Using PE-SR401FL Coax. PE34188 is a SMA male to SMA male cable using PE-SR401FL coax. This Pasternack SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to male SMA cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE34188 SMA male to SMA male cable assembly is constructed with PE-SR401FL coax. | 0 | |||
| PE34188-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401FL, RF Cable Type: PE-SR401FL, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to SMA Male Cable 36 Inch Length Using PE-SR401FL Coax., Radio frequency assembly SMA male to SMA male cable 36 inch length using PE-SR401FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male cable 36 inch length using PE-SR401FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE34188-36, can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE34188-36 is built with PE-SR401FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 36 inch length using PE-SR401FL coax. |
| 0 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Spanish ▼ 
English
Chinese
German
Japanese
Russian
Korean
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand