3205VPBF Price, Reseller, Stock

Key Specifications, Waveguide Size : WR-12, Low Max Noise Figure : 4.7 dB, Waveguide Frequency Band : E, Minimum Frequency : 60 GHz, Max Frequency : 90 GHz, Small Signal Gain: 30 dB, Flange Type and Size: UG-387/U Flange, Saturated Output Power: 18 dBm, Typical Output Power: 22 dBm. 4.2 dB Low Noise Amplifier (LNA), 60 to 90 GHz Frequencies in E Band, WR-12 Waveguide connectors with UG-387/U Flanges, 30 dB Gain., PEWGA3205 by Pasternack is a mid-power Waveguide Low Noise Amplifier (LNA) with a frequency band of E eligible for same day shipping worldwide. This WR-12 high frequency (HF) waveguide LNA operates between the frequencies of 60 GHz – 90 GHz with a typical gain of 30 dB. The PEWGA3205 E band LNA operates between -40 deg C to 80 deg C. Pasternack's 60 GHz – 90 GHz low noise amplifiers have a maximum noise figure of only 4.7 dB and a typical gain of 30 dB. The waveguide WR-12 low noise 4.7 dB amp has a max 12 Vdc integrated voltage regulation with 330 mA of typical operating Vdc current. This high reliability E band LNA maintains 30 dB of gain, and an exceptionally low 4.7 dB figure of noise; it's design is unconditionally stable, exhibiting an impressive 18 dBm of saturated power output (Psat). This HF LNA PEWGA3205 expresses a max 12 Vdc of voltage supply with 18 dBm of typical power output and it's E-band low noise figure amplification is designed for use in military, labs, telecom infrastructure, and even space applications. Contact Pasternack's knowledgeable support staff for assistance with this 90 GHz E-band frequency, 4.7 dB noise figure WR-12 amplifier. Download our UG-387/U RF LNA PDF datasheet PEWGA3205 with specifications and our CAD drawing of the of this 4.7 dB waveguide low noise UG-387/U amplifier with dimensions for details. The 330 mA WR-12 high frequency LNA is built to be sturdy and is designed for dozens of applications with its WR-12 I/O waveguide ports for UG-387/U waveguide flanges. Our 330 mA aluminum waveguide LNA's dimensions and size specifications: 1.5 inches long, 0.937 inches tall, 1.5 inches wide, and weight of 0.2 lbs. Order your resilient, high-reliability 60 GHz 90 GHz low noise amplifiers today, through the website or by phone; we're ready to pack and ship these high-quality low noise 330 mA WR-12 waveguide amplifier LNA's anywhere in the world. This low noise 330 mA RF amplifier is ready for same day purchase and is complete with a maximum noise figure no more than 4.7 dB. Pasternack's PEWGA3205 waveguide HF LNA is housed within aluminum and plated with gold, which makes for a sturdy and reliable unit. This 60 GHz – 90 GHz E band LNA with 18 dBm power is part of over 100,000 RF, microwave, and millimeter wave components that we keep in stock. Pasternack stocks a wide array of small 30 dB signal low noise amplifier products that ship same day from our warehouse for all your RF, microwave, and millimeter wave WR-12 LNA needs.

1 : $15,400.0
5 : $14,784.0
10 : $14,168.0
25 : $13,552.0

PE3205LF-36

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length: 36 inches. 7/16 DIN Male to 7/16 DIN Male Cable 36 Inch Length Using RG393 Coax, LF Solder, RoHS., Radio frequency assembly 7/16 DIN male to 7/16 DIN male cable 36 inch length using RG393 coax, LF solder, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN male cable 36 inch length using RG393 coax, LF solder, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE3205LF-36, can also be known as a 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3205LF-36 is built with RG393 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 7.5 GHz maximum frequency 7/16 DIN male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male cable 36 inch length using RG393 coax, LF solder, RoHS.
RoHS : Compliant

1 : $370.99
25 : $352.44
50 : $333.89

PE3205LF-24

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length: 24 inches. 7/16 DIN Male to 7/16 DIN Male Cable 24 Inch Length Using RG393 Coax, LF Solder, RoHS., Radio frequency assembly 7/16 DIN male to 7/16 DIN male cable 24 inch length using RG393 coax, LF solder, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN male cable 24 inch length using RG393 coax, LF solder, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE3205LF-24, can also be known as a 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3205LF-24 is built with RG393 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 7.5 GHz maximum frequency 7/16 DIN male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male cable 24 inch length using RG393 coax, LF solder, RoHS.
RoHS : Compliant

1 : $344.99
25 : $327.74
50 : $310.49

PE3C3205-60

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Female to TNC Male Low Loss Cable 60 Inch Length Using PE-P142LL Coax, RoHS., Radio frequency assembly SMA female to TNC male low loss cable 60 inch length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA female to TNC male low loss cable 60 inch length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and TNC cable connection on the other. Our low loss SMA to TNC cable assemblies have a female gender on end 1 and male on end 2. This SMA to TNC cable is a female to male coax assembly, PE3C3205-60, can also be known as a low loss SMA jack to TNC plug cable assembly and will be shipped same-day as it is purchased. SMA jack to TNC plug cable assembly PE3C3205-60 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency SMA female to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3205-60 can also be used in the other direction and will be TNC male to SMA female cable assembly if the opposite connectivity is required. Low loss SMA jack to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to TNC male low loss cable 60 inch length using PE-P142LL coax, RoHS.

1 : $318.99
25 : $303.04
50 : $287.09

PE3205LF-72

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length: 72 inches. 7/16 DIN Male to 7/16 DIN Male Cable 72 Inch Length Using RG393 Coax, LF Solder, RoHS., Radio frequency assembly 7/16 DIN male to 7/16 DIN male cable 72 inch length using RG393 coax, LF solder, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN male cable 72 inch length using RG393 coax, LF solder, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE3205LF-72, can also be known as a 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3205LF-72 is built with RG393 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 7.5 GHz maximum frequency 7/16 DIN male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male cable 72 inch length using RG393 coax, LF solder, RoHS.

1 : $455.99
25 : $433.19
50 : $410.39

PE3205LF/HS

Pasternack Enterprises

PE3205-12

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length: 12 inches. 7/16 DIN Male to 7/16 DIN Male Cable 12 Inch Length Using RG393 Coax., Radio frequency assembly 7/16 DIN male to 7/16 DIN male cable 12 inch length using RG393 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN male cable 12 inch length using RG393 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE3205-12, can also be known as a 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3205-12 is built with RG393 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 7.5 GHz maximum frequency 7/16 DIN male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male cable 12 inch length using RG393 coax.

1 : $252.99
25 : $240.34
50 : $227.69

PE3205-72

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length: 72 inches. 7/16 DIN Male to 7/16 DIN Male Cable 72 Inch Length Using RG393 Coax., Radio frequency assembly 7/16 DIN male to 7/16 DIN male cable 72 inch length using RG393 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN male cable 72 inch length using RG393 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE3205-72, can also be known as a 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3205-72 is built with RG393 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 7.5 GHz maximum frequency 7/16 DIN male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male cable 72 inch length using RG393 coax.

1 : $365.99
25 : $347.69
50 : $329.39

PE3205LF-12

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length: 12 inches. 7/16 DIN Male to 7/16 DIN Male Cable 12 Inch Length Using RG393 Coax, LF Solder, RoHS., Radio frequency assembly 7/16 DIN male to 7/16 DIN male cable 12 inch length using RG393 coax, LF solder, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN male cable 12 inch length using RG393 coax, LF solder, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE3205LF-12, can also be known as a 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3205LF-12 is built with RG393 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 7.5 GHz maximum frequency 7/16 DIN male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male cable 12 inch length using RG393 coax, LF solder, RoHS.

1 : $314.99
25 : $299.24
50 : $283.49

PE3C3205

Pasternack Enterprises

PE3C3205-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMA Female to TNC Male Low Loss Cable 100 cm Length Using PE-P142LL Coax, RoHS., Radio frequency assembly SMA female to TNC male low loss cable 100 cm length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA female to TNC male low loss cable 100 cm length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and TNC cable connection on the other. Our low loss SMA to TNC cable assemblies have a female gender on end 1 and male on end 2. This SMA to TNC cable is a female to male coax assembly, PE3C3205-100CM, can also be known as a low loss SMA jack to TNC plug cable assembly and will be shipped same-day as it is purchased. SMA jack to TNC plug cable assembly PE3C3205-100CM is built with PE-P142LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency SMA female to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3205-100CM can also be used in the other direction and will be TNC male to SMA female cable assembly if the opposite connectivity is required. Low loss SMA jack to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to TNC male low loss cable 100 cm length using PE-P142LL coax, RoHS.

1 : $282.99
25 : $268.84
50 : $254.69

PE3W13205/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Female Cable Using PE-SR402FLJ Coax with HeatShrink. PE3W13205/HS is a SMA male right angle to SMA female cable using PE-SR402FLJ coax. This Pasternack SMA male right angle to SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female SMA cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W13205/HS SMA male right angle to SMA female cable assembly is constructed with PE-SR402FLJ coax.

PE3W13205LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Female Cable Using PE-SR402FLJ Coax with HeatShrink, LF Solder. PE3W13205LF/HS is a SMA male right angle to SMA female cable using PE-SR402FLJ coax. This Pasternack SMA male right angle to SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female SMA cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W13205LF/HS SMA male right angle to SMA female cable assembly is constructed with PE-SR402FLJ coax.

PE3205-48

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length: 48 inches. 7/16 DIN Male to 7/16 DIN Male Cable 48 Inch Length Using RG393 Coax., Radio frequency assembly 7/16 DIN male to 7/16 DIN male cable 48 inch length using RG393 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN male cable 48 inch length using RG393 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE3205-48, can also be known as a 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3205-48 is built with RG393 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 7.5 GHz maximum frequency 7/16 DIN male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male cable 48 inch length using RG393 coax.

1 : $335.99
25 : $319.19
50 : $302.39

PE3C3205-24

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Female to TNC Male Low Loss Cable 24 Inch Length Using PE-P142LL Coax, RoHS., Radio frequency assembly SMA female to TNC male low loss cable 24 inch length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA female to TNC male low loss cable 24 inch length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and TNC cable connection on the other. Our low loss SMA to TNC cable assemblies have a female gender on end 1 and male on end 2. This SMA to TNC cable is a female to male coax assembly, PE3C3205-24, can also be known as a low loss SMA jack to TNC plug cable assembly and will be shipped same-day as it is purchased. SMA jack to TNC plug cable assembly PE3C3205-24 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency SMA female to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3205-24 can also be used in the other direction and will be TNC male to SMA female cable assembly if the opposite connectivity is required. Low loss SMA jack to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to TNC male low loss cable 24 inch length using PE-P142LL coax, RoHS.

1 : $280.99
25 : $266.94
50 : $252.89

TE Connectivity

2-320565-1

TE Connectivity

TERMINAL,PIDG R 16-14 8 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 16 – 14 AWG Wire Size: 1.25 – 2 mm² Wire Size: 2050 – 5180 CMA Stud Size: #8 M4 Closed Ring Tongue Terminal 16 – 14 AWG 1.25 – 2 mm² 2050 – 5180 CMA | Pidg Ring Tongue Terminal | Part Number: 2-320565-1 | Internal Number: 2-320565-1 | TE Connectivity
RoHS : Compliant

10,000 : $0.41
5,000 : $0.42
2,500 : $0.43
1,000 : $0.44
500 : $0.45
250 : $0.46
100 : $0.47
50 : $0.48
25 : $0.49
10 : $0.5
1 : $0.51

69,638

32054

TE Connectivity

PIDG SPD 22-16COMM 22-18MIL 10 Spade Terminal Type: Spade Tongue Terminal Wire Size: 22 AWG Wire Size: .3 – 1.42 mm² Wire Size: 509 – 3260 CMA Stud Size: #10 Spade Tongue Terminal 22 AWG .3 – 1.42 mm² 509 – 3260 CMA | Pidg Spade Tongue Terminal | Part Number: 32054 | Internal Number: 32054 | Alias Number: 589454-000 | TE Connectivity
RoHS : Compliant

5,000 : $0.71
2,500 : $0.73
1,000 : $0.75
500 : $0.77
250 : $0.78
100 : $0.8
50 : $0.82
25 : $0.84
10 : $0.85
1 : $0.87

21,553

2-32054-1

TE Connectivity

PIDG SPD 22-16COMM 22-18MIL 10 Spade Terminal Type: Spade Tongue Terminal Wire Size: 22 AWG Wire Size: .3 – 1.42 mm² Wire Size: 509 – 3260 CMA Stud Size: #10 Spade Tongue Terminal 22 AWG .3 – 1.42 mm² 509 – 3260 CMA | Pidg Spade Tongue Terminal | Part Number: 2-32054-1 | Internal Number: 2-32054-1 | TE Connectivity
RoHS : Compliant

2,500 : $2.36
1,000 : $2.42
500 : $2.49
250 : $2.55
100 : $2.61
50 : $2.68
25 : $2.74
10 : $2.81
1 : $2.87

8,783

320554

TE Connectivity

PIDG R 22-16 COMM 22-18 MIL 8 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 22 – 16 AWG Wire Size: .3 – 1.42 mm² Wire Size: 509 – 3260 CMA Stud Size: #8 M4 Closed Ring Tongue Terminal 22 – 16 AWG .3 – 1.42 mm² 509 – 3260 CMA | Pidg Ring Tongue Terminal | Part Number: 320554 | Internal Number: 320554 | Alias Number: F92535-000 | TE Connectivity
RoHS : Compliant

5,000 : $0.43
2,500 : $0.44
1,000 : $0.45
500 : $0.46
250 : $0.47
100 : $0.48
50 : $0.49
25 : $0.5
10 : $0.51
1 : $0.52

2,996

32053

TE Connectivity

PIDG SPD 22-16 COMM 22-18MIL 8 Spade Terminal Type: Spade Tongue Terminal Wire Size: 22 AWG Wire Size: .3 – 1.42 mm² Wire Size: 509 – 3260 CMA Stud Size: #8 M4 Spade Tongue Terminal 22 AWG .3 – 1.42 mm² 509 – 3260 CMA | Pidg Spade Tongue Terminal | Part Number: 32053 | Internal Number: 32053 | Alias Number: 126360-000 | TE Connectivity
RoHS : Compliant

2,500 : $0.85
1,000 : $0.88
500 : $0.9
250 : $0.92
100 : $0.94
50 : $0.97
25 : $0.99
10 : $1.01
1 : $1.04

1,754

320566

TE Connectivity

KNIFE DISCONNECT,N PIDG 16-14 Barrel Color: Blue Body Plating Material: Tin Insulation Option: Partially Insulated Wire Size: 16 – 14 AWG Wire Size: 1.04 – 2.62 mm² Blue Tin Partially Insulated 16 – 14 AWG | Pidg Knife Disconnect Splice | Part Number: 320566 | Internal Number: 320566 | TE Connectivity
RoHS : Compliant

2,500 : $3.83
1,000 : $3.93
500 : $4.03
250 : $4.14
100 : $4.24
50 : $4.34
25 : $4.45
10 : $4.55
1 : $4.65

1,508

8-320571-1

TE Connectivity

PIDG R 22-16 COMM 22-18MIL 1/4 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 18 AWG Wire Size: .8 – .9 mm² Wire Size: 1900 CMA Stud Size: M6 1/4 Closed Ring Tongue Terminal 18 AWG .8 – .9 mm² 1900 CMA | Pidg Ring Tongue Terminal | Part Number: 8-320571-1 | Internal Number: 8-320571-1 | TE Connectivity
RoHS : Compliant

500 : $1.65
250 : $1.71
100 : $1.77
50 : $1.83
25 : $1.88
10 : $1.94
1 : $2.0

1,073

2-320574-2

TE Connectivity

TERMINAL,PIDG R 16-14 10 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 16 – 14 AWG Wire Size: 1.25 – 2 mm² Wire Size: 2050 – 5180 CMA Stud Size: #10 Closed Ring Tongue Terminal 16 – 14 AWG 1.25 – 2 mm² 2050 – 5180 CMA | Pidg Ring Tongue Terminal | Part Number: 2-320574-2 | Internal Number: 2-320574-2 | Alias Number: 1180732 | TE Connectivity
RoHS : Compliant

2,500 : $0.78
1,000 : $0.8
500 : $0.83
250 : $0.85
100 : $0.87
50 : $0.89
25 : $0.91
10 : $0.93
1 : $0.95

1,054

8-320562-5

TE Connectivity

SPLICE BUTT PIDG 16-14 Primary Product Color: Blue - Transluscent Splice Type: Butt Splice Wire Size: 16 – 14 AWG Wire Size: 1.25 – 2 mm² Wire Size: 2.05 – 5.18 kcmil Blue - Transluscent Butt Splice 16 – 14 AWG 1.25 – 2 mm² | Pidg Butt Splice | Part Number: 8-320562-5 | Internal Number: 8-320562-5 | Alias Number: AMPS-8-0320562-5 | TE Connectivity
RoHS : Compliant

500 : $2.24
250 : $2.32
100 : $2.4
50 : $2.47
25 : $2.55
10 : $2.63
1 : $2.7

978

8-320554-1

TE Connectivity

PIDG R 22-16 COMM 22-18 MIL 8 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 22 – 16 AWG Wire Size: .3 – 1.42 mm² Wire Size: 509 – 3260 CMA Stud Size: #8 M4 Closed Ring Tongue Terminal 22 – 16 AWG .3 – 1.42 mm² 509 – 3260 CMA | Pidg Ring Tongue Terminal | Part Number: 8-320554-1 | Internal Number: 8-320554-1 | Alias Number: A28467-000 | TE Connectivity
RoHS : Compliant

500 : $1.37
250 : $1.42
100 : $1.47
50 : $1.52
25 : $1.56
10 : $1.61
1 : $1.66

719

320555

TE Connectivity

KNIFE DISCONNECT,N PIDG 22-16 Barrel Color: Red Body Plating Material: Tin Insulation Option: Partially Insulated Wire Size: 22 – 16 AWG Wire Size: .26 – 1.65 mm² Red Tin Partially Insulated 22 – 16 AWG | Pidg Knife Disconnect Splice | Part Number: 320555 | Internal Number: 320555 | TE Connectivity
RoHS : Compliant

500 : $2.11
250 : $2.18
100 : $2.25
50 : $2.33
25 : $2.4
10 : $2.47
1 : $2.55

519

8-32059-1

TE Connectivity

TERMINAL,PIDG SPD 16-14 8 Spade Terminal Type: Spade Tongue Terminal Wire Size: 16 AWG Wire Size: 1.25 – 2 mm² Wire Size: 2050 – 5180 CMA Stud Size: M4 #8 Spade Tongue Terminal 16 AWG 1.25 – 2 mm² 2050 – 5180 CMA | Pidg Spade Tongue Terminal | Part Number: 8-32059-1 | Internal Number: 8-32059-1 | TE Connectivity
RoHS : Compliant

500 : $1.51
250 : $1.56
100 : $1.61
50 : $1.66
25 : $1.71
10 : $1.77
1 : $1.82

439

8-320563-1

TE Connectivity

TERMINAL,PIDG R 16-14 1/4 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 16 – 14 AWG Wire Size: 1.25 – 2 mm² Wire Size: 2050 – 5180 CMA Stud Size: M6 1/4 Closed Ring Tongue Terminal 16 – 14 AWG 1.25 – 2 mm² 2050 – 5180 CMA | Pidg Ring Tongue Terminal | Part Number: 8-320563-1 | Internal Number: 8-320563-1 | TE Connectivity
RoHS : Compliant

500 : $1.65
250 : $1.71
100 : $1.77
50 : $1.83
25 : $1.88
10 : $1.94
1 : $2.0

401

8-32053-1

TE Connectivity

PIDG SPD 22-16 COMM 22-18MIL 8 Spade Terminal Type: Spade Tongue Terminal Wire Size: 22 AWG Wire Size: .3 – 1.42 mm² Wire Size: 509 – 3260 CMA Stud Size: M4 #8 Spade Tongue Terminal 22 AWG .3 – 1.42 mm² 509 – 3260 CMA | Pidg Spade Tongue Terminal | Part Number: 8-32053-1 | Internal Number: 8-32053-1 | Alias Number: AMPS-8-0032053-1 | TE Connectivity
RoHS : Compliant

500 : $1.51
250 : $1.56
100 : $1.61
50 : $1.66
25 : $1.71
10 : $1.77
1 : $1.82

131

8-320560-1

TE Connectivity

TERMINAL,PIDG R 16-14 8 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 16 – 14 AWG Wire Size: 1.25 – 2 mm² Wire Size: 2050 – 5180 CMA Stud Size: M4 #8 Closed Ring Tongue Terminal 16 – 14 AWG 1.25 – 2 mm² 2050 – 5180 CMA | Pidg Ring Tongue Terminal | Part Number: 8-320560-1 | Internal Number: 8-320560-1 | Alias Number: C80996-000 | TE Connectivity
RoHS : Compliant

500 : $1.37
250 : $1.42
100 : $1.47
50 : $1.52
25 : $1.56
10 : $1.61
1 : $1.66

129

Teledyne HiRel

8413205YA

Teledyne HiRel

STATIC RAM, 16K X 1, 35 NS ACCESS TIME

8413205SA

Teledyne HiRel

STATIC RAM, 16K X1, 35 NS

8413205RA

Teledyne HiRel

STATIC RAM, 16K X1, 35 NS

Venkel Ltd.

ESDC3205M1Q-EVL

VENKEL LTD

TVS;DFN1006-2;5V;0.5uA
RoHS : Not Compliant

Vyrian

MAX3205EETE

Analog Devices (Maxim Integrated)

10,908

AT97SC3205T-H3M4C10B

Microchip Technology Inc

RISC Microprocessor, 8-Bit, CMOS, PQCC32
RoHS : Compliant

9,628

ADP32050001CPR

Analog Devices Inc

9,422

8413205RX

Texas Instruments

Standard SRAM, 16KX1, 35ns, CMOS

9,364

AT97SC3205-X3A15-10

Microchip Technology Inc

Microprocessor Circuit, CMOS, PDSO28
RoHS : Compliant

8,529

AT97SC3205T-G3M4C10B

Microchip Technology Inc

RISC Microprocessor, 8-Bit, CMOS, PQCC32
RoHS : Compliant

7,118

ADP3205JCPZ-REEL

Analog Devices Inc

Switching Controller, Current-mode, PQCC40
RoHS : Not Compliant

6,306

KTC-D320/512

Kingston Technology Company

6,258

AT97SC3205T-G3M4600B

Microchip Technology Inc

8-Bit, CMOS
RoHS : Compliant

5,575

BTS3205NHUSA1

Infineon Technologies AG

Buffer/Inverter Based Peripheral Driver, 0.55A, PDSO3
RoHS : Compliant

4,867

2320542

Phoenix Contact

DC-DC Regulated Power Supply Module, 1 Output, 120W, Hybrid
RoHS : Compliant

4,769

MAX3205EABL-T

Maxim Integrated Products

Trans Voltage Suppressor Diode, Unidirectional, 1 Element, Silicon
RoHS : Not Compliant

749

BTS3205NHUSA1/SAMPLE

Infineon Technologies AG

Buffer/Inverter Based Peripheral Driver

645

132056-9008

ITT Interconnect Solutions

Circular Connector

613

M9F43205

Schneider Electric

Thermal Magnetic Circuit Breaker
RoHS : Compliant

599

Waytek, Inc.

670040032052

Ideal Clamp Products Inc

Stainless Steel Hose Clamp Size #32 Band 1/2" 1-1/2" TO 2-1/2"

10 : $2.2086
50 : $1.9632
100 : $1.7814
200 : $1.7268
500 : $1.6632
1,000 : $1.5996

843

986332053

The Bosch Group

Mini Relay, CHange Over, 5-Pin SPDT, 30NO, 20NC, 12VDC w/Resistor | Like 75414

1 : $17.7937
5 : $16.0363
10 : $14.7182
50 : $14.2057
100 : $13.7663
200 : $13.327

Win Source Electronics

IRF3205

International Rectifier

Power MOSFET(Vdss=55V, Rds(on)=8.0mohm, Id=110A⑤)
RoHS : Not Compliant

1,110 : $0.2703
890 : $0.2813
685 : $0.2922
480 : $0.3142
310 : $0.3252
145 : $0.3472

100,000

AUIRF3205ZSTRL

Infineon Technologies AG

MOSFET N-CH 55V 75A D2PAK
RoHS : Compliant

185 : $2.1021
138 : $2.3447
107 : $2.4255
78 : $2.5064
50 : $2.5872
21 : $3.1532

88,440

AUIRF3205ZS

Infineon Technologies AG

MOSFET N-CH 55V 75A D2PAK
RoHS : Compliant

95 : $3.1884
71 : $3.5563
55 : $3.679
40 : $3.8016
26 : $3.9242
11 : $4.7826

68,000

IRF3205ZS

Infineon Technologies AG

AUTOMOTIVE MOSFET | MOSFET N-CH 55V 75A D2PAK
RoHS : Not Compliant

1,025 : $0.3291
820 : $0.3424
630 : $0.3558
440 : $0.3825
285 : $0.3959
135 : $0.4227

48,000

IRF3205S

International Rectifier

Power MOSFET(Vdss=55V, Rds(on)=8.0mohm, Id=110A⑤)
RoHS : Not Compliant

595 : $0.5082
445 : $0.5669
345 : $0.5864
250 : $0.606
160 : $0.6255
70 : $0.7623

43,397

IRF3205ZSTRRPBF

Infineon Technologies AG

MOSFET N-CH 55V 75A D2PAK / Trans MOSFET N-CH Si 55V 110A 3-Pin(2+Tab) D2PAK T/R
RoHS : Compliant

1,025 : $0.3291
820 : $0.3424
630 : $0.3558
440 : $0.3825
285 : $0.3959
135 : $0.4227

42,100

BTS3205N

Infineon Technologies AG

Smart Low-Side Power Switch
RoHS : Compliant

365 : $0.8263
295 : $0.8599
225 : $0.8935
160 : $0.9607
105 : $0.9942
50 : $1.0614

37,870

BTS3205NHUSA1

Infineon Technologies AG

IC SWITCH PWR LOSIDE SOT223-4
RoHS : Compliant

365 : $0.8263
295 : $0.8599
225 : $0.8935
160 : $0.9607
105 : $0.9942
50 : $1.0614

34,950

IRF3205ZSTRLPBF

Infineon Technologies AG

MOSFET N-CH 55V 75A D2PAK
RoHS : Compliant

920 : $0.3262
740 : $0.3394
570 : $0.3527
400 : $0.3792
255 : $0.3925
120 : $0.419

30,111

SP3205-01ETG

Littelfuse Inc

TVS DIODE 3.3VWM 12VC SOD882 / 12V Clamp 4A (8/20µs) Ipp Tvs Diode Surface Mount SOD-882
RoHS : Compliant

2,940 : $0.1021
2,195 : $0.1139
1,700 : $0.1178
1,235 : $0.1217
800 : $0.1256
330 : $0.1531

25,881

PE43205B-Z

pSemi

RF ATTENUATOR ADJ 50OHM 12WFQFN
RoHS : Compliant

101 : $2.9771
76 : $3.3207
59 : $3.4352
43 : $3.5497
28 : $3.6642
12 : $4.4657

21,000

22-23-2051

Molex

KK 100 HDR FRLK VERT 05 CKT TIN
RoHS : Compliant

3,385 : $0.0887
2,530 : $0.0989
1,960 : $0.1023
1,420 : $0.1057
920 : $0.1091
380 : $0.133

13,000

IRFI3205

International Rectifier

Power MOSFET(Vdss=55V, Rds(on)=0.008ohm, Id=64A)
RoHS : Not Compliant

126 : $2.6811
94 : $2.9905
73 : $3.0936
53 : $3.1967
34 : $3.2999
14 : $4.0216

8,000

DRV3205QPHPRQ1

Texas Instruments

IC MOTOR DRIVER 4V-40V 48HTQFP
RoHS : Compliant

35 : $8.7076
26 : $9.7123
20 : $10.0472
15 : $10.3821
10 : $10.717
4 : $13.0614

1,456

ADV3205JSTZ

Analog Devices Inc

IC CROSSPOINT SWIT 16X16 100LQFP
RoHS : Compliant

7 : $60.7273
5 : $67.7344
4 : $70.0701
3 : $72.4056
2 : $74.7414
1 : $91.0909

898

3205VPBF Reseller

Enlace URL