| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
311L-S08-R Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
![]() TME | APMD151311LP-6R8M | YAGEO Corporation | APMD151311LP-6R8M |
| 4,700 | |
| 73325-311LF | Amphenol Corporation | Connector: RJ45; female; data transfer; PIN: 8; Cat 3; unshielded |
| 3,680 | ||
| 76785-311LF | Amphenol Corporation | Connector: FFC/FPC; data; gold-plated; straight; 20mΩ |
| 3,000 | ||
| 10136656-0311LF | Amphenol Communications Solutions | Connector: wire-board; plug; female; data; Minitek® Pwr 3.0; PIN: 3 RoHS : Compliant |
| 2,385 | ||
| 10136655-0311LF | Amphenol Corporation | Connector: wire-board; male; data; 8.5A; 600V; PIN: 3; shrouded; 3mm |
| 1,600 | ||
| 10137867-0311LF | Amphenol Corporation | Connector: wire-board; male; data; 8.5A; PIN: 3; shrouded; 3mm |
| 1,600 | ||
| HW-03-11-L-D-500-SM-A | Samtec Inc | Connector: pin strips; pin header; data; soldering; straight RoHS : Compliant |
| 400 | ||
| 76382-311LF | Amphenol Corporation | Connector: wire-board; male; data; 3A; PIN: 11; shrouded; 2.54mm |
| 278 | ||
| 43/11 L | El Bag | DIN rail mounting bracket; 43x11mm; Body: grey |
| 98 | ||
| 76384-311LF | Amphenol Corporation | Connector: wire-board; male; data; 3A; PIN: 11; shrouded; 2.54mm |
| 85 | ||
| 89892-311LF | Amphenol Corporation | Connector: PCB to PCB; female; data; 3A; 1kV; PIN: 22; thermoplastic |
| 64 | ||
| OPD-Q3311LB-BW | Opto Plus LED Corporation | Display: LED; 7-segment; 8.4mm; 0.33"; No.char: 4; blue; 40mcd |
| 0 | ||
| KSA0M311 LFS | C&K Switches | Microswitch TACT; SPST-NO; Pos: 2; 0.05A/32VDC; THT; none; 1.4N |
| 0 | ||
| KSF0M311 LFS | C&K Switches | Microswitch TACT; SPST-NO; Pos: 2; 0.05A/32VDC; THT; none; 1.9N |
| 0 | ||
| 52104311LF | Lapp Group | Reduction of threads for glands |
| 0 | ||
![]() Avnet Americas | WSL59311L000FEA | Vishay Intertechnologies | SMD Current Sense Resistor, 0.001 ohm, WSL Series, 5931 [1577 Metric], 5 W, ? 1%, Metal Strip - Tape and Reel (Alt: WSL59311L000FEA) RoHS : Compliant |
| 7,500 | |
| HW-03-11-L-D-450-100 | Samtec Inc | Board Stackers & Spacers, Pin Header, 11.43 mm, 6 Contacts, Solder, 2 Rows, 2.54 mm, HW Series - Bulk (Alt: HW-03-11-L-D-450-100) RoHS : Compliant |
| 5,341 | ||
| 76785-311LF | Amphenol Corporation | - Product that comes on tape, but is not reeled (Alt: 27AJ4006) RoHS : Compliant |
| 0 | ||
| MTSW-103-11-L-D-740 | Samtec Inc | - Bulk (Alt: MTSW-103-11-L-D-740) RoHS : Compliant |
| 0 | ||
| TSW-113-11-L-S | Samtec Inc | Pin Header, Board-to-Board, Wire-to-Board, 2.54 mm, 1 Rows, 13 Contacts, Through Hole, TSW Series - Bulk (Alt: TSW-113-11-L-S) RoHS : Compliant |
| 0 | ||
| HW-03-11-L-D-500-SM-A | Samtec Inc | Board Stackers & Spacers, Pin Header, 12.7 mm, 6 Contacts, Solder, 2 Rows, 2.54 mm, HW Series - Bulk (Alt: HW-03-11-L-D-500-SM-A) RoHS : Compliant |
| 0 | ||
| 10136645-0311LF | Amphenol Corporation | - Bag (Alt: 10136645-0311LF) RoHS : Compliant |
| 0 | ||
| 73304-311LF | Amphenol Corporation | - Tape and Reel (Alt: 73304-311LF) RoHS : Compliant |
| 0 | ||
| 76785-311LF | Amphenol Corporation | - Tape and Reel (Alt: 76785-311LF) RoHS : Compliant |
| 0 | ||
| PLT0603Z9311LBT1 | Vishay Intertechnologies | SMD Chip Resistor, 9.31 kohm, ? 0.01%, 150 mW, 0603 [1608 Metric], Thin Film, Precision, PLT Series - Tape and Reel (Alt: PLT0603Z9311LBT1) RoHS : Not Compliant |
| 0 | ||
| PLT1206Z9311LBT1 | Vishay Intertechnologies | SMD Chip Resistor, 9.31 kohm, ? 0.01%, 400 mW, 1206 [3216 Metric], Thin Film, Precision, PLT Series - Tape and Reel (Alt: PLT1206Z9311LBT1) RoHS : Not Compliant |
| 0 | ||
| HW-13-11-L-D-530-SM-A | Samtec Inc | - Rail/Tube (Alt: HW-13-11-L-D-530-SM-A) RoHS : Compliant |
| 0 | ||
| 10137784-04311LF | Amphenol Corporation | - Trays (Alt: 10137784-04311LF) RoHS : Not Compliant |
| 0 | ||
| PLT0603Z9311LSTI | Vishay Intertechnologies | SMD Chip Resistor, 9.31 kohm, ? 0.01%, 150 mW, 0603 [1608 Metric], Thin Film, Precision, PLT Series - Custom Tape W/Leader (Alt: PLT0603Z9311LSTI) RoHS : Compliant |
| 0 | ||
| PLT0603Z9311LSWP | Vishay Intertechnologies | SMD Chip Resistor, 9.31 kohm, ? 0.01%, 150 mW, 0603 [1608 Metric], Thin Film, Precision, PLT Series - Waffle Pack (Alt: PLT0603Z9311LSWP) RoHS : Compliant |
| 0 | ||
![]() Newark | RN1311,LF(T | Toshiba America Electronic Components | Bipolar Transistor, 50V, 0.1A, Sot-323; |Toshiba RN1311,LF(T RoHS : Compliant |
| 3,900 | |
| RN1311,LF(T | Toshiba America Electronic Components | Bipolar Transistor, 50V, 0.1A, Sot-323; |Toshiba RN1311,LF(T RoHS : Compliant |
| 3,900 | ||
| DW-03-11-L-D-640 | Samtec Inc | Conn Stack Brd, 2.54Mm, 6Pos, Hdr; |Samtec, Inc. DW-03-11-L-D-640 RoHS : Compliant |
| 2,493 | ||
| MTSW-103-11-L-D-740 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 6Pos; |Samtec, Inc. MTSW-103-11-L-D-740 RoHS : Compliant |
| 1,414 | ||
| DW-03-11-L-D-547-LL | Samtec Inc | Conn Stack Brd, 2.54Mm, 6Pos, Hdr; |Samtec, Inc. DW-03-11-L-D-547-LL RoHS : Compliant |
| 753 | ||
| WSLP59311L000FEB | Vishay Intertechnologies | Curr Sense Res Smd, 0R001, 10W; |Vishay WSLP59311L000FEB RoHS : Compliant |
| 688 | ||
| WSLP59311L000FEB | Vishay Intertechnologies | Curr Sense Res Smd, 0R001, 10W; |Vishay WSLP59311L000FEB RoHS : Compliant |
| 688 | ||
| ZW-03-11-L-D-565-230-LL | Samtec Inc | Conn Stack Brd, 2.54Mm, 6Pos, Hdr; |Samtec, Inc. ZW-03-11-L-D-565-230-LL RoHS : Compliant |
| 688 | ||
| DW-13-11-L-D-485 | Samtec Inc | Conn Stack Brd, 2.54Mm, 26Pos, Hdr; |Samtec, Inc. DW-13-11-L-D-485 RoHS : Compliant |
| 628 | ||
| ZW-13-11-L-D-590-250 | Samtec Inc | Conn Stack Brd, 2.54Mm, 26Pos, Hdr; |Samtec, Inc. ZW-13-11-L-D-590-250 RoHS : Compliant |
| 442 | ||
| TSW-113-11-L-S | Samtec Inc | Header, 2.54Mm, Tht Vert, 13Way; |Samtec, Inc. TSW-113-11-L-S RoHS : Compliant |
| 400 | ||
| DW-03-11-L-S-300 | Samtec Inc | Conn Stack Brd, 2.54Mm, 3Pos, Hdr; |Samtec, Inc. DW-03-11-L-S-300 RoHS : Compliant |
| 357 | ||
| MTSW-113-11-L-D-650 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 26Pos; |Samtec, Inc. MTSW-113-11-L-D-650 RoHS : Compliant |
| 310 | ||
| HMTSW-113-11-L-D-180 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 26Pos; |Samtec, Inc. HMTSW-113-11-L-D-180 RoHS : Compliant |
| 183 | ||
| HW-13-11-L-D-530-SM-A | Samtec Inc | Conn Stack Brd, 2.54Mm, 26Pos, Hdr; |Samtec, Inc. HW-13-11-L-D-530-SM-A RoHS : Compliant |
| 78 | ||
![]() Analog Devices Inc | AD73311LARUZ![]() | Analog Devices Inc | SINGLE-CHANNEL AFE I.C. RoHS : Compliant |
| 3,618 | |
AD73311LARSZ-REEL![]() | Analog Devices Inc | E-CHANNEL AFE I.C. RoHS : Compliant |
| 1,500 | ||
AD73311LARSZ![]() | Analog Devices Inc | SPEECH & TELEPHONY CODEC I.C. RoHS : Compliant |
| 25 | ||
| 106789-HMC311LP3 | Analog Devices Inc | HMC311LP3 Evaluation PCB RoHS : Compliant |
| 1 | ||
AD73311LARUZ-RL7![]() | Analog Devices Inc | SINGLE-CHANNEL AFE I.C. RoHS : Compliant |
| 0 | ||
AD73311LARUZ-RL![]() | Analog Devices Inc | SINGLE-CHANNEL AFE I.C. RoHS : Compliant |
| 0 | ||
![]() RS | 75915-311LF | Amphenol FCi | CONN;RECT;PCBSOCKET;11CNTS;THRU-HOLE;75915SERIES;TOPENTRY;1ROW RoHS : Compliant |
| 266 | |
| M3SS3-11L | ABB Low Voltage Products and Systems | SWITCH, SELECTOR,3 POS, ILLUM, BLACK PLASTIC BEZEL, SHORT HDL, RTN R, BLUE |
| 7 | ||
| FTL31-CA4M2AAVBJ (FTL31-1LF0/0) | Endress+Hauser Management AG | VIBRONIC LEVEL SWITCH, LIQUIPHANT FTL31, 10-30VDC; 3-WIRE PNP, THREAD ASME MNPT |
| 3 | ||
| FTL31-CA4V2AAVAJ (FTL31-1LH0/0) | Endress+Hauser Management AG | POINT LEVEL SWITCH, 10-30VDC, MNPT1/2, 3-WIRE PNP, VALVE PLUG ISO4400 NPT1/2 |
| 1 | ||
| C32-B0-24-690-311-L (C32B024690311L | C32-B0-24-690-311-L | C32B024690311L) | Carling Technologies | CIRCUIT BREAKER, C-SERIES, HYDRAULIC-MAGNETIC |
| 0 | ||
| CA1-B4-14-615-311-L (CA1B414615311L | CA1-B4-14-615-311-L | CA1B414615311L) | Carling Technologies | CIRCUIT BREAKER, C-SERIES, HYDRAULIC-MAGNETIC |
| 0 | ||
| CA1-B4-14-450-311-L (CA1B414450311L | CA1-B4-14-450-311-L | CA1B414450311L) | Carling Technologies | CIRCUIT BREAKER, C-SERIES, HYDRAULIC-MAGNETIC |
| 0 | ||
| CA1-B4-14-425-311-L (CA1B414425311L | CA1-B4-14-425-311-L | CA1B414425311L) | Carling Technologies | CIRCUIT BREAKER, C-SERIES, HYDRAULIC-MAGNETIC |
| 0 | ||
| CA1-B4-14-650-311-L (CA1B414650311L | CA1-B4-14-650-311-L | CA1B414650311L) | Carling Technologies | CIRCUIT BREAKER, C-SERIES, HYDRAULIC-MAGNETIC |
| 0 | ||
| CA1-B4-14-610-311-L (CA1B414610311L | CA1-B4-14-610-311-L | CA1B414610311L) | Carling Technologies | CIRCUIT BREAKER, C-SERIES, HYDRAULIC-MAGNETIC |
| 0 | ||
| CA1-B4-14-625-311-L (CA1B414625311L | CA1-B4-14-625-311-L | CA1B414625311L) | Carling Technologies | CIRCUIT BREAKER, C-SERIES, HYDRAULIC-MAGNETIC |
| 0 | ||
| C32-B0-24-685-311-L (C32B024685311L | C32-B0-24-685-311-L | C32B024685311L) | Carling Technologies | CIRCUIT BREAKER, C-SERIES, HYDRAULIC-MAGNETIC |
| 0 | ||
| CA1-B4-14-630-311-L (CA1B414630311L | CA1-B4-14-630-311-L | CA1B414630311L) | Carling Technologies | CIRCUIT BREAKER, C-SERIES, HYDRAULIC-MAGNETIC |
| 0 | ||
| CA1-B4-14-475-311-L (CA1B414475311L | CA1-B4-14-475-311-L | CA1B414475311L) | Carling Technologies | CIRCUIT BREAKER, C-SERIES, HYDRAULIC-MAGNETIC |
| 0 | ||
| LTILA31-1L-BL-RC-FN/125N (RLL-48262300|LTILA31-1L-BL-RC-FN/125N|LTILA311LBLRCFN/ | Carling Technologies | ROCKER SWITCH, FULL SIZED, TIPPETTE SERIES |
| 0 | ||
![]() Rochester Electronics | AD73311LARS-REEL![]() | Analog Devices Inc | Telecom Circuit, 1-Func, CMOS, PDSO20 RoHS : Not Compliant |
| 1,200 | |
AD73311LAR-REEL![]() | Analog Devices Inc | Telecom Circuit, 1-Func, CMOS, PDSO20 RoHS : Not Compliant |
| 11,000 | ||
AD73311LARS![]() | Analog Devices Inc | Telecom Circuit, 1-Func, CMOS, PDSO20 RoHS : Not Compliant |
| 2,505 | ||
AD73311LAR![]() | Analog Devices Inc | Telecom Circuit, 1-Func, CMOS, PDSO20 RoHS : Not Compliant |
| 208,343 | ||
AD73311LARSZ![]() | Analog Devices Inc | Analog Front End 16 Bits 1 CH DSP, SPI 20-SOP Tube RoHS : Compliant |
| 74 | ||
AD73311LARSZ-REEL7![]() | Analog Devices Inc | Analog Front End 16 Bits 1 CH DSP, SPI 20-SOP T/R RoHS : Compliant |
| 319 | ||
AD73311LARS-REEL7![]() | Analog Devices Inc | Telecom Circuit, 1-Func, CMOS, PDSO20 RoHS : Not Compliant |
| 3,000 | ||
AD73311LARU![]() | Analog Devices Inc | Telecom Circuit, 1-Func, CMOS, PDSO20 RoHS : Not Compliant |
| 2,455 | ||
| ACS70311LKTATG-001B5-C | Allegro MicroSystems LLC | High Accuracy 240kHz Programmable Linear Sensor IC with Reverse Battery Protection |
| 1,455 | ||
| ACS70311LKTATN-005B5-C | Allegro MicroSystems LLC | Linear and Magnetic Sensor IC Linear Analog Voltage 4-SIP T/R RoHS : Compliant |
| 780 | ||
| HMC311LP3E | Hittite Microwave Corp | Wide Band Low Power Amplifier, 0MHz Min, 6000MHz Max, 1 Func, GAAS RoHS : Compliant |
| 2 | ||
![]() Sager | MTSW-103-11-L-D-740 | Samtec Inc | Headers & Wire Housings Variable Height PCB Header Strips, 0.100 pitch RoHS : Compliant |
| 1,414 | |
| HTSW-203-11-L-D-RA | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| HW-03-11-L-D-500-SM-A | Samtec Inc | Board to Board & Mezzanine Connectors High Temperature Flexible Board Stacking Header, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| HW-13-11-L-D-200-055 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HW-23-11-LM-S-375-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HW-33-11-LM-D-375-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HW-33-11-LM-S-475-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| LCW-113-11-L-M-300-PR | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| LCW-123-11-L-S-230-RA | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| CA3-B0-24-810-311-L | Carling Technologies | Circuit Breakers CA3B024810311L RoHS : Compliant |
| 0 | ||
| ZW-03-11-L-D-270-260 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| DW-13-11-L-D-200 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| DW-13-11-L-Q-450 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| MTSW-113-11-L-D-500 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| LTILA31-1L-BL-RC-FN | Carling Technologies | Rocker Switches | 0 | |||
![]() ComSIT USA | AD73311LARS![]() | Analog Devices Inc | LOW COST, LOW POWER CMOS GENERAL PURPOSE ANALOG FRONT END Telecom Circuit, 1-Func, CMOS, PDSO20 RoHS : Not Compliant | 1,099 | ||
| AD73311LARSREEL | Analog Devices Inc | LOW COST, LOW POWER CMOS GENERAL PURPOSE ANALOG FRONT END Telecom Circuit, 1-Func, CMOS, PDSO20 RoHS : Not Compliant | 1,089 | |||
AD73311LARS-REEL![]() | Analog Devices Inc | LOW COST, LOW POWER CMOS GENERAL PURPOSE ANALOG FRONT END Telecom Circuit, 1-Func, CMOS, PDSO20 RoHS : Not Compliant | 551 | |||
| HMC311LP3E | hmc | DC-6 GHZ INGAP HBT GAIN BLOCK MMIC AMPLIFIER Wide Band Low Power Amplifier, 0MHz Min, 6000MHz Max, 1 Func, GAAS RoHS : Not Compliant | 21 | |||
![]() Interstate Connecting Components | 10136645-0311LF | Amphenol FCi | 10136645-0311LF-MINITEK PWR4.2 RoHS : Compliant | 0 | ||
| 73304-311LF | Amphenol FCi | SMT RA 8 POSITION-73304-311LF RoHS : Compliant | 0 | |||
| 76785-311LF | Amphenol FCi | DF CTT TERM SGP ON STRIP RoHS : Compliant |
| 0 | ||
| 10137784-04311LF | Amphenol FCi | 10137784-04311LF-MTK 4.2 04P S RoHS : Compliant | 0 | |||
| 311LS001N0802 | Glenair Inc | SHRINK BOOT ADAPTERS RoHS : Not Compliant |
| 0 | ||
| 311LS001N1405 | Glenair Inc | SHRINK BOOT ADAPTERS RoHS : Not Compliant |
| 0 | ||
| 10136646-04311LF | Amphenol FCi | 10136646-04311LF-MTK 4.2 04P S RoHS : Unknown | 0 | |||
| 91900-31311LF | Amphenol FCi | CONAN CONNECTOR ASSEMBLY-91900 RoHS : Compliant | 0 | |||
| 93696-311LF | Amphenol FCi | DUBOX RCP DR TMT VERT-SPREAD L RoHS : Compliant | 0 | |||
| 10127819-16311LF | Amphenol FCi | 10127819-16311LF-MTK 4.2 16P D RoHS : Unknown | 0 | |||
| 311LS001NF1202 | Glenair Inc | SHRINK BOOT ADAPTERS RoHS : Not Compliant |
| 0 | ||
| 311LS001NF1608 | Glenair Inc | SHRINK BOOT ADAPTERS RoHS : Not Compliant |
| 0 | ||
| 91901-31311LF | Amphenol FCi | CONAN PLUG LF-91901-31311LF RoHS : Compliant | 0 | |||
| 10119333-103-11LF | Amphenol FCi | BERGSTIK HDR SR SMT HOR-101193 RoHS : Compliant | 0 | |||
| 10127819-22311LF | Amphenol FCi | 10127819-22311LF-MTK 4.2 22P D RoHS : Unknown | 0 | |||
![]() NexGen Digital | RN1311,LXHF | Toshiba America Electronic Components | RoHS : Compliant | 13 | ||
![]() PEI Genesis | J1311L | SOURIAU-SUNBANK |
| 0 | ||
| 131-1L | HellermannTyton |
| 0 | |||
| 131-1LW24 | HellermannTyton |
| 0 | |||
| WA23-311L | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
![]() Chip 1 Exchange | NUC1311LD2AE | Nuvoton Technology Corp | INSTOCK RoHS : Compliant | 80,398 | ||
| NUC1311LC2AE | Nuvoton Technology Corp | INSTOCK RoHS : Compliant | 57,279 | |||
| KSL0M311LFTR | Littelfuse Inc | INSTOCK RoHS : Compliant | 25,187 | |||
| 73325-311LF | Amphenol Corporation | INSTOCK | 5,382 | |||
| 76385-311LF | Amphenol Corporation | INSTOCK | 3,211 | |||
| AD73311LARUZ | INSTOCK | 22 | ||||
![]() Avnet Abacus | 98431-311LF | Amphenol Corporation | Conn Modular Jack F 4 POS 127mm Solder ST SMD 4 Terminal 1 Port TR Cat 3 (Alt: 98431-311LF) RoHS : Compliant | 0 | ||
| 73304-311LF | Amphenol Corporation | SMT RA 8 POSITION - Tape and Reel (Alt: 73304-311LF) RoHS : Compliant | 0 | |||
| 76785-311LF | Amphenol Corporation | Contact SKT Crimp ST Cable Mount Reel (Alt: 76785-311LF) RoHS : Compliant | 0 | |||
| 91601-311LF | Amphenol Corporation | Conn Socket Strip RCP 11 POS 254mm Solder ST SMD Tube (Alt: 91601-311LF) RoHS : Compliant | 0 | |||
| 91615-311LF | Amphenol Corporation | Conn Socket Strip RCP 22 POS 254mm Solder ST SMD Tube (Alt: 91615-311LF) RoHS : Compliant | 0 | |||
| 71607-311LF | Amphenol Corporation | Conn Socket Strip RCP 11 POS 254mm Solder RA SMD Tube (Alt: 71607-311LF) RoHS : Compliant | 0 | |||
| 71991-311LF | Amphenol Corporation | Conn Socket Strip RCP 22 POS 254mm Solder ST ThruHole Tube (Alt: 71991-311LF) RoHS : Compliant | 0 | |||
| 89882-311LF | Amphenol Corporation | Conn Socket Strip RCP 11 POS 254mm Solder RA ThruHole Tube (Alt: 89882-311LF) RoHS : Compliant | 0 | |||
| 10136644-0311LF | Amphenol Corporation | (Alt: 10136644-0311LF) RoHS : Compliant | 0 | |||
| 10136655-0311LF | Amphenol Corporation | - Tape and Reel (Alt: 10136655-0311LF) RoHS : Compliant | 0 | |||
| 10136656-0311LF | Amphenol Corporation | (Alt: 10136656-0311LF) RoHS : Compliant | 0 | |||
| WSLP59311L000FEB | Vishay Intertechnologies | WSLP5931 001 1 EB (Alt: WSLP59311L000FEB) RoHS : Compliant | 0 | |||
| 10124632-0150311LF | Amphenol Corporation | Conn DIMM Socket SKT 288 POS 085mm Solder ST ThruHole (Alt: 10124632-0150311LF) RoHS : Compliant | 0 | |||
| HW-03-11-L-D-400-SM | Samtec Inc | (Alt: HW-03-11-L-D-400-SM) RoHS : Compliant | 0 | |||
| HW-03-11-L-D-433-SM-A | Samtec Inc | Board Stackers Spacers Pin Header 11 mm 6 Contacts Solder 2 Rows 254 mm (Alt: HW-03-11-L-D-433-SM-A) RoHS : Compliant | 0 | |||
![]() Avnet Asia | G846A060311LS4HR | Amphenol Corporation | (Alt: G846A060311LS4HR) RoHS : Compliant | 0 | ||
| LP2311LT1G | LRC Leshan Radio Co Ltd | 20V P-CHANNEL ENHANCEMENT-MODE MOSFET VD (Alt: LP2311LT1G) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 76347-311LF | Amphenol Corporation | IN STOCK SHIP TODAY |
| 14,850 | |
![]() EBV Elektronik | CY9AF311LAPMC1-GNE2 | Infineon Technologies AG | MCU 32Bit ARM Cortex M3 64KB Flash 27V to 55V 64Pin LQFP Tray (Alt: SP005656979) RoHS : Compliant | 0 | ||
![]() Master Electronics | MTMM-103-11-L-S-000 | Samtec Inc | RoHS : Compliant |
| 0 | |
| MTMM-113-11-L-D-200 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-123-11-L-D-045 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-123-11-L-D-090 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-133-11-L-D-015 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-143-11-L-D-195 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-143-11-L-Q-075 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTSW-103-11-L-D-740 | Samtec Inc | .100 Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| HTSW-203-11-L-D-RA | Samtec Inc | .100 High-Temp Terminal Strip RoHS : Compliant |
| 0 | ||
| HW-03-11-L-D-465-SM | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HW-03-11-L-D-500-SM-A | Samtec Inc | .100 Flex Stack High-Temp Flexible Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
| HW-03-11-L-D-654-SM-A | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HW-03-11-L-S-565-SM | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HW-13-11-L-D-200-055 | Samtec Inc | .100 Flex Stack High-Temp Flexible Board Stacker Through-hole RoHS : Compliant |
| 0 | ||
| HW-23-11-L-D-540-SM | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3311LF | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50. MCX Plug to MCX Plug Right Angle Cable Using RG196 Coax, RoHS. PE3311LF is a MCX plug to MCX plug right angle cable using RG196 coax. This Pasternack MCX plug to MCX plug right angle cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm MCX for connector 2. MCX to MCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MCX to plug MCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3311LF MCX plug to MCX plug right angle cable assembly is constructed with RG196 coax and the maximum VSWR is 1.4:1. | 126 | ||
| PE3311LF-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm, Length: 36 inches. MCX Plug to MCX Plug Right Angle Cable 36 Inch Length Using RG196 Coax, RoHS., Radio frequency assembly MCX plug to MCX plug right angle cable 36 inch length using RG196 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MCX plug to MCX plug right angle cable 36 inch length using RG196 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MCX cable connection on one end and right angle MCX cable connection on the other. Our MCX to right angle MCX cable assemblies have a plug gender on end 1 and plug on end 2. This MCX to MCX cable is a plug to plug coax assembly, PE3311LF-36, can also be known as a MCX male to right angle MCX male cable assembly and will be shipped same-day as it is purchased. MCX male to MCX male cable assembly PE3311LF-36 is built with RG196 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to right angle MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency MCX plug to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3311LF-36 can also be used in the other direction and will be right angle MCX plug to MCX plug cable assembly if the opposite connectivity is required. MCX male to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to MCX cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MCX plug to MCX plug right angle cable 36 inch length using RG196 coax, RoHS. |
| 21 | ||
| PE3311LF-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm, Length: 48 inches. MCX Plug to MCX Plug Right Angle Cable 48 Inch Length Using RG196 Coax, RoHS., Radio frequency assembly MCX plug to MCX plug right angle cable 48 inch length using RG196 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MCX plug to MCX plug right angle cable 48 inch length using RG196 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MCX cable connection on one end and right angle MCX cable connection on the other. Our MCX to right angle MCX cable assemblies have a plug gender on end 1 and plug on end 2. This MCX to MCX cable is a plug to plug coax assembly, PE3311LF-48, can also be known as a MCX male to right angle MCX male cable assembly and will be shipped same-day as it is purchased. MCX male to MCX male cable assembly PE3311LF-48 is built with RG196 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to right angle MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency MCX plug to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3311LF-48 can also be used in the other direction and will be right angle MCX plug to MCX plug cable assembly if the opposite connectivity is required. MCX male to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to MCX cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MCX plug to MCX plug right angle cable 48 inch length using RG196 coax, RoHS. |
| 21 | ||
| PE3311LF-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm, Length: 12 inches. MCX Plug to MCX Plug Right Angle Cable 12 Inch Length Using RG196 Coax, RoHS., Radio frequency assembly MCX plug to MCX plug right angle cable 12 inch length using RG196 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MCX plug to MCX plug right angle cable 12 inch length using RG196 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MCX cable connection on one end and right angle MCX cable connection on the other. Our MCX to right angle MCX cable assemblies have a plug gender on end 1 and plug on end 2. This MCX to MCX cable is a plug to plug coax assembly, PE3311LF-12, can also be known as a MCX male to right angle MCX male cable assembly and will be shipped same-day as it is purchased. MCX male to MCX male cable assembly PE3311LF-12 is built with RG196 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to right angle MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency MCX plug to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3311LF-12 can also be used in the other direction and will be right angle MCX plug to MCX plug cable assembly if the opposite connectivity is required. MCX male to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to MCX cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MCX plug to MCX plug right angle cable 12 inch length using RG196 coax, RoHS. |
| 21 | ||
| PE3311LF-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm, Length: 72 inches. MCX Plug to MCX Plug Right Angle Cable 72 Inch Length Using RG196 Coax, RoHS., Radio frequency assembly MCX plug to MCX plug right angle cable 72 inch length using RG196 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MCX plug to MCX plug right angle cable 72 inch length using RG196 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MCX cable connection on one end and right angle MCX cable connection on the other. Our MCX to right angle MCX cable assemblies have a plug gender on end 1 and plug on end 2. This MCX to MCX cable is a plug to plug coax assembly, PE3311LF-72, can also be known as a MCX male to right angle MCX male cable assembly and will be shipped same-day as it is purchased. MCX male to MCX male cable assembly PE3311LF-72 is built with RG196 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to right angle MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency MCX plug to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3311LF-72 can also be used in the other direction and will be right angle MCX plug to MCX plug cable assembly if the opposite connectivity is required. MCX male to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to MCX cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MCX plug to MCX plug right angle cable 72 inch length using RG196 coax, RoHS. |
| 21 | ||
| PE3311LF-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm, Length: 60 inches. MCX Plug to MCX Plug Right Angle Cable 60 Inch Length Using RG196 Coax, RoHS., Radio frequency assembly MCX plug to MCX plug right angle cable 60 inch length using RG196 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MCX plug to MCX plug right angle cable 60 inch length using RG196 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MCX cable connection on one end and right angle MCX cable connection on the other. Our MCX to right angle MCX cable assemblies have a plug gender on end 1 and plug on end 2. This MCX to MCX cable is a plug to plug coax assembly, PE3311LF-60, can also be known as a MCX male to right angle MCX male cable assembly and will be shipped same-day as it is purchased. MCX male to MCX male cable assembly PE3311LF-60 is built with RG196 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to right angle MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency MCX plug to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3311LF-60 can also be used in the other direction and will be right angle MCX plug to MCX plug cable assembly if the opposite connectivity is required. MCX male to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to MCX cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MCX plug to MCX plug right angle cable 60 inch length using RG196 coax, RoHS. |
| 21 | ||
| PE34311LF-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length: 18 inches. SMA Male Right Angle to SMA Female Bulkhead Cable 18 Inch Length Using PE-SR405AL Coax., Radio frequency assembly SMA male right angle to SMA female bulkhead cable 18 inch length using PE-SR405AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA female bulkhead cable 18 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA bulkhead cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE34311LF-18, can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE34311LF-18 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SMA right angle male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34311LF-18 can also be used in the other direction and will be SMA female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female bulkhead cable 18 inch length using PE-SR405AL coax. |
| 0 | ||
| PE3W06311LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMB Plug to Reverse Polarity SMA Male Cable Using RG316 Coax, LF Solder. PE3W06311LF is a SMB plug to reverse polarity SMA male cable using RG316 coax. This Pasternack SMB plug to reverse polarity SMA male cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm SMA for connector 2. Our plug SMB to reverse polarity male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W06311LF SMB plug to SMA reverse polarity male cable assembly is constructed with RG316 coax. | 0 | |||
| PE3W13311LF | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. BNC Male to N Female Cable Using LMR-400 Coax, LF Solder. PE3W13311LF is a BNC male to N female cable using LMR-400 coax. This Pasternack BNC male to N female cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm N for connector 2. Our male BNC to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13311LF BNC male to N female cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE34311LF-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male Right Angle to SMA Female Bulkhead Cable 48 Inch Length Using PE-SR405AL Coax., Radio frequency assembly SMA male right angle to SMA female bulkhead cable 48 inch length using PE-SR405AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA female bulkhead cable 48 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA bulkhead cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE34311LF-48, can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE34311LF-48 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SMA right angle male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34311LF-48 can also be used in the other direction and will be SMA female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female bulkhead cable 48 inch length using PE-SR405AL coax. |
| 0 | ||
| PE34311LF-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male Right Angle to SMA Female Bulkhead Cable 36 Inch Length Using PE-SR405AL Coax., Radio frequency assembly SMA male right angle to SMA female bulkhead cable 36 inch length using PE-SR405AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA female bulkhead cable 36 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA bulkhead cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE34311LF-36, can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE34311LF-36 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SMA right angle male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34311LF-36 can also be used in the other direction and will be SMA female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female bulkhead cable 36 inch length using PE-SR405AL coax. |
| 0 | ||
| PE34311LF-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Male Right Angle to SMA Female Bulkhead Cable 24 Inch Length Using PE-SR405AL Coax., Radio frequency assembly SMA male right angle to SMA female bulkhead cable 24 inch length using PE-SR405AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA female bulkhead cable 24 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA bulkhead cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE34311LF-24, can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE34311LF-24 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SMA right angle male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34311LF-24 can also be used in the other direction and will be SMA female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female bulkhead cable 24 inch length using PE-SR405AL coax. |
| 0 | ||
| PE34311LF-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male Right Angle to SMA Female Bulkhead Cable 60 Inch Length Using PE-SR405AL Coax., Radio frequency assembly SMA male right angle to SMA female bulkhead cable 60 inch length using PE-SR405AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA female bulkhead cable 60 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA bulkhead cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE34311LF-60, can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE34311LF-60 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SMA right angle male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34311LF-60 can also be used in the other direction and will be SMA female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female bulkhead cable 60 inch length using PE-SR405AL coax. |
| 0 | ||
| PE34311LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50. SMA Male Right Angle to SMA Female Bulkhead Cable Using PE-SR405AL Coax. PE34311LF is a SMA male right angle to SMA female bulkhead cable using PE-SR405AL coax. This Pasternack SMA male right angle to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female SMA bulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE34311LF SMA male right angle to SMA female bulkhead cable assembly is constructed with PE-SR405AL coax and the maximum VSWR is 1.4:1. | 0 | |||
| PE34311LF-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male Right Angle to SMA Female Bulkhead Cable 12 Inch Length Using PE-SR405AL Coax., Radio frequency assembly SMA male right angle to SMA female bulkhead cable 12 inch length using PE-SR405AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA female bulkhead cable 12 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA bulkhead cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE34311LF-12, can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE34311LF-12 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SMA right angle male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34311LF-12 can also be used in the other direction and will be SMA female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female bulkhead cable 12 inch length using PE-SR405AL coax. |
| 0 | ||
![]() Vyrian | AD73311LARU-REEL7![]() | Analog Devices Inc | Telecom Circuit, 1-Func, CMOS, PDSO20 RoHS : Not Compliant | 12,331 | ||
AD73311LARUZ-REEL![]() | Analog Devices Inc | Telecom Circuit, 1-Func, CMOS, PDSO20 RoHS : Not Compliant | 12,194 | |||
AD73311LAR-REEL7![]() | Analog Devices Inc | Telecom Circuit, 1-Func, CMOS, PDSO20 RoHS : Not Compliant | 11,686 | |||
AD73311LARUZ![]() | Analog Devices Inc | Telecom Circuit, 1-Func, CMOS, PDSO20 RoHS : Compliant | 10,173 | |||
| HMC311LP3RTR | Analog Devices Inc | RF/Microwave Amplifier, 1 Func, BIPolar RoHS : Not Compliant | 9,758 | |||
AD73311LAR-REEL![]() | Analog Devices Inc | Telecom Circuit, 1-Func, CMOS, PDSO20 RoHS : Not Compliant | 9,591 | |||
AD73311LARSZ![]() | Analog Devices Inc | Telecom Circuit, 1-Func, CMOS, PDSO20 RoHS : Compliant | 9,306 | |||
AD73311LARSZ-REEL![]() | Analog Devices Inc | Telecom Circuit, 1-Func, CMOS, PDSO20 RoHS : Compliant | 8,896 | |||
AD73311LARS-REEL![]() | Analog Devices Inc | Telecom Circuit, 1-Func, CMOS, PDSO20 RoHS : Not Compliant | 8,277 | |||
| BCM4311LKFBG | Broadcom Limited | 8,212 | ||||
AD73311LAR![]() | Analog Devices Inc | Telecom Circuit, 1-Func, CMOS, PDSO20 RoHS : Not Compliant | 7,756 | |||
AD73311LARS![]() | Analog Devices Inc | Telecom Circuit, 1-Func, CMOS, PDSO20 RoHS : Not Compliant | 7,276 | |||
| HMC311LP3 | Analog Devices Inc | Wide Band Low Power Amplifier, 0MHz Min, 6000MHz Max, 1 Func, GAAS RoHS : Not Compliant | 7,062 | |||
| 106789-HMC311LP3 | Analog Devices Inc | RoHS : Compliant | 6,828 | |||
| BQ4311LSH-N100 | Texas Instruments | Non-Volatile SRAM Module, 32KX8, 100ns, CMOS | 4,051 | |||
![]() Win Source Electronics | HMC311LP3E | Analog Devices Inc | InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 6 GHz | IC RF AMP GP 0HZ-6GHZ 16SMT RoHS : Compliant |
| 1,000 | |
| HMC311LP3ETR | Analog Devices Inc | IC GAIN BLOCK AMP 16SMD RoHS : Compliant |
| 920 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |