| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
220-1-RV Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
![]() Pasternack Enterprises US | PE7602-20 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 20 dB, VSWR, Max: 1.15:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 20dB RF fixed attenuator 2W, DC to 6GHz, SMA male to female, Stainless Steel. The PE7602-20 is a fixed 20 dB attenuator from Pasternack. This 20 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. The max input power rating (CW) of this RF attenuator is 2 Watts. This passive attenuator has a maximum VSWR of 1.15:1 and operates between -55 and 125 deg C. Our radio frequency attenuator with SMA connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 20 dB. The Pasternack PE7602-20 attenuator is rated for up to 6 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The attenuator has a stainless steel SMA connector with gold-plated brass contact. Our fixed RF attenuator PE7602-20 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 20 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 12 | |
| PE2202-20 | Pasternack Enterprises | Key Specifications, Directionality: Directional, Connector Series: SMA, Connector Gender: Female, Design: Coupler, Minimum Frequency: 2 GHz, Maximum Frequency: 4 GHz, Maximum Input Power: 50 Watt, Coupling Value: 20 dB. Directional 20 dB SMA Coupler From 2 GHz to 4 GHz Rated To 50 Watts. RF coupler part number PE2202-20 from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is directional and is manufactured with SMA ports. Our directional coupler design uses SMA ports that are female gender and 50 Ohm impedance. The Pasternack directional coupler design is rated for a minimum frequency of 2 GHz and a maximum frequency of 4 GHz. Directional coupler part # PE2202-20 is constructed with a coupling value of 20 dB and a coupler directivity of 22 dB. This female SMA directional coupler is built with a maximum insertion loss of 0.2 dB and a maximum input power of 50 watts. Our directional coupler design with SMA connector is rated for a maximum insertion loss of 0.2 dB and a maximum VSWR of 1.15. Additional female SMA coupler specs for this RF component can be found on its radio frequency directional coupler PDF specifications datasheet above. PE2202-20 directional 20 dB SMA coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts. |
| 0 | ||
| PE3C2220/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200-UF, RF Cable Type: LMR-200-UF, RF Cable Impedance: 50 Ohm. BNC Male to BNC Male Cable Using LMR-200-UF Coax with HeatShrink. PE3C2220/HS is a BNC male to BNC male cable using LMR-200-UF coax. This Pasternack BNC male to BNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our male BNC to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2220/HS BNC male to BNC male cable assembly is constructed with LMR-200-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W20220/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Blue FAKRA Jack to SMA Male Right Angle Cable Using LMR-100 Coax with HeatShrink. PE3W20220/HS is a FAKRA jack to SMA male right angle cable using LMR-100A coax. This Pasternack FAKRA jack to SMA male right angle cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm SMA for connector 2. FAKRA to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our jack FAKRA to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20220/HS FAKRA jack to SMA male right angle cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W22039/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm. 4.3-10 Male Right Angle to QMA Male Right Angle Cable Using SPP-250-LLPL Coax with HeatShrink. PE3W22039/HS is a 4.3-10 male right angle to QMA male right angle cable using SPP-250-LLPL coax. This Pasternack 4.3-10 male right angle to QMA male right angle cable assembly uses a 50 Ohm 4.3-10 for connector 1 and a 50 Ohm QMA for connector 2. 4.3-10 right angle to QMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 4.3-10 right angle to male QMA right angle cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W22039/HS 4.3-10 male right angle to QMA male right angle cable assembly is constructed with SPP-250-LLPL coax. | 0 | |||
| PE3W22048 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. Smooth Bore SMP Male Bulkhead to MMCX Plug Cable Using PE-SR405AL Coax. PE3W22048 is a SMP male bulkhead to MMCX plug cable using PE-SR405AL coax. This Pasternack SMP male bulkhead to MMCX plug cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm MMCX for connector 2. Our male SMP bulkhead to plug MMCX cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W22048 SMP male bulkhead to MMCX plug cable assembly is constructed with PE-SR405AL coax. | 0 | |||
| PE3W22093 | Pasternack Enterprises | Key Specifications, Connector Series 1: C, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. C Male to N Male Cable Using LMR-195 Coax. PE3W22093 is a C male to N male cable using LMR-195 coax. This Pasternack C male to N male cable assembly uses a 50 Ohm C for connector 1 and a 50 Ohm N for connector 2. Our male C to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22093 C male to N male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE1WAN112-20ELSF | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-112, Gain Min: 20, Beam Width, 3dB V: 17.3, Beam Width, 3dB H: 17.5, Frequency, Min: 7.05 GHz, Frequency, Max: 10 GHz. WR-112 Standard Gain Horn with 20 dBi gain, End Launch SMA Female Connector, Integrated Cage-Style Mount. The PE1WAN112-20ELSF standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-112 input and a waveguide to coaxial transition adapter. Our WR-112 waveguide antenna features an SMA female connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-112 standard gain horn antenna with an SMA female input has a minimum frequency of 7.05 GHz and a maximum frequency of 10 GHz. Pasternack’s PE1WAN112-20ELSF waveguide horn antenna has a typical gain of 20 dBi. Our waveguide antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.5 degrees at 3 dB. This antenna has a length of 9.43 inches, a width of 4.33 inches, and a weight of 2.09 lbs. This WR-112 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 0 | ||
| PE3W02201 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. SMB Plug Right Angle to SMB Plug Right Angle Cable Using PE-C100-LSZH Coax. PE3W02201 is a SMB plug right angle to SMB plug right angle cable using PE-C100-LSZH coax. This Pasternack SMB plug right angle to SMB plug right angle cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm SMB for connector 2. SMB right angle to SMB right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SMB right angle to plug SMB right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02201 SMB plug right angle to SMB plug right angle cable assembly is constructed with PE-C100-LSZH coax. | 0 | |||
| PE3W07220/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm. 75 Ohm BNC Female to 75 Ohm BNC Male Right Angle Cable Using 75 Ohm RG179 Coax with HeatShrink. PE3W07220/HS is a BNC female to BNC male right angle cable using RG179 coax. This Pasternack BNC female to BNC male right angle cable assembly uses a 75 Ohm BNC for connector 1 and a 75 Ohm BNC for connector 2. BNC to BNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female BNC to male BNC right angle cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W07220/HS BNC female to BNC male right angle cable assembly is constructed with RG179 coax. | 0 | |||
| PE3W10220 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. SMA Female to TNC Female Bulkhead Cable Using PE-SR405FL Coax. PE3W10220 is a SMA female to TNC female bulkhead cable using PE-SR405FL coax. This Pasternack SMA female to TNC female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. Our female SMA to female TNC bulkhead cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W10220 SMA female to TNC female bulkhead cable assembly is constructed with PE-SR405FL coax. | 0 | |||
| PE3W21220/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Mini SMP Female Right Angle to SMA Female Bulkhead Cable 12 Inch Length Using PE-P086HF Coax with HeatShrink., Pasternack’s PE3W21220/HS-12 right angle mini SMP female to SMA female bulkhead RF cable assembly using PE-P086HF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to SMA female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle mini SMP cable connection on one end and an SMA bulkhead cable connection on the other. Our mini SMP to SMA cable assembly has a female gender on end 1 and a female on end 2. PE3W21220/HS-12 can also be known as a right angle mini SMP jack to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.52 inches, allowing for a single bend without damaging the cable. Our PE3W21220/HS-12 RF cable has an FEP jacket of 0.104-inch diameter. The flexible RF cable has a between series connection. Our right angle mini SMP female to bulkhead SMA female cable has a maximum VSWR of 1.4:1. This PE3W21220/HS-12 mini SMP jack to SMA jack cable assembly is built with PE-P086HF, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with right angle mini SMP to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder attachment method and a brass body with gold plating, while the other has the solder/solder attachment method and a brass body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long RF cable are available on our downloadable PDF datasheet. PE3W21220/HS-12 can also be used in the other direction and will be an SMA female bulkhead to right angle mini SMP female cable assembly if the opposite connectivity is required. This mini SMP right angle jack to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3W22010 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.4mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm. 2.92mm Female 2 Hole Flange to 2.4mm Male Cable Using PE-047SR Tan Coax. PE3W22010 is a 2.92mm female 2 hole flange to 2.4mm male cable using PE-047SR coax. This Pasternack 2.92mm female 2 hole flange to 2.4mm male cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm 2.4mm for connector 2. Our female 2.92mm 2 hole flange to male 2.4mm cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W22010 2.92mm female 2 hole flange to 2.4mm male cable assembly is constructed with PE-047SR coax. | 0 | |||
| PE3W22047 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm. SMP Female to MMCX Plug Cable Using PE-047SR Tan Coax. PE3W22047 is a SMP female to MMCX plug cable using PE-047SR coax. This Pasternack SMP female to MMCX plug cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm MMCX for connector 2. Our female SMP to plug MMCX cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W22047 SMP female to MMCX plug cable assembly is constructed with PE-047SR coax. | 0 | |||
| PE3W22092 | Pasternack Enterprises | Key Specifications, Connector Series 1: C, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. C Male to SMA Female Cable Using LMR-195 Coax. PE3W22092 is a C male to SMA female cable using LMR-195 coax. This Pasternack C male to SMA female cable assembly uses a 50 Ohm C for connector 1 and a 50 Ohm SMA for connector 2. Our male C to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22092 C male to SMA female cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
![]() Venkel Ltd. | SAFC2220C0G502-220JNE | VENKEL LTD | Safety Cap;2220;C0G;X1/Y2;22pF;�5% RoHS : Compliant | 0 | ||
| SAFC2208C0G502-220JNE | VENKEL LTD | Safety Cap;2208;C0G;X1/Y2;22pF;�5% RoHS : Compliant | 0 | |||
| C0201HQN100-220GNP | VENKEL LTD | High-Q NP0 Capacitor;0201;HQN;10V;22pF;�2% RoHS : Compliant | 0 | |||
| C0505HQN251-220FNE | VENKEL LTD | High-Q NP0 Capacitor;0505;HQN;250V;22pF;�1% RoHS : Compliant | 0 | |||
C0603C0G101-220KNP![]() | VENKEL LTD | Chip Capacitor;0603;C0G;100V;22pF;�10% RoHS : Compliant | 0 | |||
C0805C0G101-220GNP![]() | VENKEL LTD | Chip Capacitor;0805;C0G;100V;22pF;�2% RoHS : Compliant | 0 | |||
| C2220C0G101-562JNE | VENKEL LTD | Chip Capacitor;2220;C0G;100V;5600pF;�5% RoHS : Compliant | 0 | |||
| C0805X7R500-220KNP | VENKEL LTD | Chip Capacitor;0805;X7R;50V;22pF;�10% RoHS : Compliant | 0 | |||
| C1111HQN101-220FNE | VENKEL LTD | High-Q NP0 Capacitor;1111;HQN;100V;22pF;�1% RoHS : Compliant | 0 | |||
| SSPI676740-220NU | VENKEL LTD | Square Shielded Power Inductor;676740;22uH;�30% RoHS : Not Compliant | 0 | |||
| TFCR0402-16W-C-2200FT | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;220R;�1% RoHS : Compliant | 0 | |||
| TFCR0402-16W-E-2200BT | VENKEL LTD | Thin Film CR;0402;1/16W;�25PPM;220R;�0.1% RoHS : Compliant | 0 | |||
| SMPI404018-220MU | VENKEL LTD | Square Miniature Power Inductor;404018;22uH;�20% RoHS : Compliant | 0 | |||
| SMPI505040-220NU | VENKEL LTD | Square Miniature Power Inductor;505040;22uH;�30% RoHS : Compliant | 0 | |||
| CRG0603-Q-4220FT | VENKEL LTD | RoHS 10/10 Green CR;0603;1/10W;422R;�1% RoHS : Compliant | 0 | |||
![]() Wuhan P&S | LV52207NXB-VH | onsemi | Dual Channel LED Boost Driver RoHS : Compliant |
| 920,000 | |
| P4SMA220CAHE3_A/H | Vishay Intertechnologies | Surface-Mount TRANSZORB Transient Voltage Suppressors RoHS : Compliant |
| 122,400 | ||
| MURS220T3G | onsemi | Surface Mount Ultrafast Power Rectifiers RoHS : Compliant |
| 120,000 | ||
| MMA02040C2200FB300 | Vishay Intertechnologies | Professional Thin Film MELF Resistors RoHS : Compliant |
| 63,000 | ||
| MMA02040C2208FB300 | Vishay Intertechnologies | Professional Thin Film MELF Resistors RoHS : Compliant |
| 51,000 | ||
| CRCW0402220KFKED | Vishay Intertechnologies | Standard thick film chip resistor, 220K ���� 1%, 0.063W RoHS : Compliant |
| 50,000 | ||
| HI2220P551R-10 | Qnity Laird | - RoHS : Compliant |
| 24,000 | ||
| MMB02070C2209FB200 | Vishay Intertechnologies | MELF resistor 1W 22�� 1% 0207 RoHS : Compliant |
| 20,000 | ||
| AC03000002208JAC00 | Vishay Intertechnologies | Wirewound Resistors��2.2 Ohms ��5% 3W RoHS : Compliant |
| 18,000 | ||
| CRCW0402200KFKED | Vishay Intertechnologies | Standard Thick Film Chip Resistors RoHS : Compliant |
| 10,000 | ||
| G22041432709J2C000 | Vishay Intertechnologies | Axial Vitreous Leaded Wirewound Resistors RoHS : Compliant |
| 5,000 | ||
| 1.5SMC220A-E3/9AT | Vishay Intertechnologies | TVS diode surface mount type RoHS : Compliant |
| 3,500 | ||
| IHLP3232DZEK220M11 | Vishay Intertechnologies | IHLP Commercial Inductors, High Temperature (155 ��C) Series RoHS : Compliant |
| 2,500 | ||
| IHLD3232HBER220M5A | Vishay Intertechnologies | - RoHS : Compliant |
| 1,000 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |