208-DS02-R Price, Reseller, Stock

LED Lextar module; 56 x LED Standard; neutral white 4000 K; 3-step; 2090lm/350mA; CRI min 80; power 14.7 W; input voltage 42.1; 280mm x 20mm x 1mm /200

25 : $4.991
10 : $5.322
3 : $5.656
1 : $5.987

A44-1208

POKOJ

Holder for Din rail terminal block;grey; width 10mm; UL94V

150 : $0.639
30 : $0.721
10 : $0.815
1 : $1.223

Pasternack Enterprises US

PE3W02084/HS-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male Right Angle to BNC Male Right Angle Low Loss Cable 36 Inch Length Using LMR-240 Coax with HeatShrink., Radio frequency assembly N male right angle to BNC male right angle low loss cable 36 inch length using LMR-240 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to BNC male right angle low loss cable 36 inch length using LMR-240 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and right angle BNC cable connection on the other. Our low loss right angle N type to right angle BNC cable assemblies have a male gender on end 1 and male on end 2. PE3W02084/HS-36 can also be known as a low loss right angle type N plug to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to BNC plug cable assembly PE3W02084/HS-36 is built with LMR-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle N type to right angle BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency type N right angle male to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02084/HS-36 can also be used in the other direction and will be right angle BNC male to right angle N type male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to BNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to BNC male right angle low loss cable 36 inch length using LMR-240 coax with heatshrink.

1 : $183.99
25 : $174.79
50 : $165.59
100 : $158.23

PE3C2080/HS-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to N Male Low Loss Cable 12 Inch Length Using LMR-400-UF Coax With Times Microwave Components with HeatShrink., Radio frequency assembly N male to N male low loss cable 12 inch length using LMR-400-UF coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 12 inch length using LMR-400-UF coax with Times Microwave components with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C2080/HS-12 can also be known as a low loss type N plug to N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3C2080/HS-12 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 12 inch length using LMR-400-UF coax with Times Microwave components with heatshrink.

1 : $127.99
25 : $121.59
50 : $115.19
100 : $110.07

PE3C2080LF/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. N Male to N Male Low Loss Cable Using LMR-400-UF Coax with Times Microwave Components with HeatShrink, LF Solder., Radio frequency assembly N male to N male low loss cable using LMR-400-UF coax with Times Microwave components with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable using LMR-400-UF coax with Times Microwave components with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and N type cable connection on the other. Our low loss type N to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C2080LF/HS can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3C2080LF/HS is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable using LMR-400-UF coax with Times Microwave components with heatshrink, LF solder.

PE3W13208

Pasternack Enterprises

Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. UHF Male to TNC Male Cable Using LMR-195 Coax. PE3W13208 is a UHF male to TNC male cable using LMR-195 coax. This Pasternack UHF male to TNC male cable assembly uses a 50 Ohm UHF for connector 1 and a 50 Ohm TNC for connector 2. Our male UHF to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13208 UHF male to TNC male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W20831

Pasternack Enterprises

Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PECX007, RF Cable Type: 141LL SR, RF Cable Impedance: 50 Ohm. 3.5mm Female to N Male Cable Using 141 Coax. PE3W20831 is a 3.5mm female to N male cable using 141LL SR coax. This Pasternack 3.5mm female to N male cable assembly uses a 50 Ohm 3.5mm for connector 1 and a 50 Ohm N for connector 2. Our female 3.5mm to male N cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W20831 3.5mm female to N male cable assembly is constructed with 141LL SR coax.

PE3W20868

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to MCX Plug Cable Using RG174 Coax. PE3W20868 is a SMA male right angle to MCX plug cable using RG174 coax. This Pasternack SMA male right angle to MCX plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MCX for connector 2. SMA right angle to MCX coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to plug MCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20868 SMA male right angle to MCX plug cable assembly is constructed with RG174 coax.

PE3W20813

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-FR, RF Cable Type: LMR-100A-FR, RF Cable Impedance: 50 Ohm. SMA Male to BNC Male Cable Using LMR-100-FR Coax. PE3W20813 is a SMA male to BNC male cable using LMR-100A-FR coax. This Pasternack SMA male to BNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our male SMA to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20813 SMA male to BNC male cable assembly is constructed with LMR-100A-FR coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W20813/HS

Pasternack Enterprises

PE3W20895

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. BNC Female Bulkhead to MCX Plug Right Angle Cable Using RG174 Coax. PE3W20895 is a BNC female bulkhead to MCX plug right angle cable using RG174 coax. This Pasternack BNC female bulkhead to MCX plug right angle cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm MCX for connector 2. BNC to MCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female BNC bulkhead to plug MCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20895 BNC female bulkhead to MCX plug right angle cable assembly is constructed with RG174 coax.

PE3W12089

Pasternack Enterprises

Key Specifications, Connector Series 1: SMB, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. SMB Jack Bulkhead to SMA Female Cable Using PE-SR405AL Coax. PE3W12089 is a SMB jack bulkhead to SMA female cable using PE-SR405AL coax. This Pasternack SMB jack bulkhead to SMA female cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm SMA for connector 2. Our jack SMB bulkhead to female SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W12089 SMB jack bulkhead to SMA female cable assembly is constructed with PE-SR405AL coax.

PE3W20846

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. SMP Female Right Angle to SMP Female Right Angle Cable Using PE-P086HF Coax. PE3W20846 is a SMP female right angle to SMP female right angle cable using PE-P086HF coax. This Pasternack SMP female right angle to SMP female right angle cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm SMP for connector 2. SMP right angle to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMP right angle to female SMP right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20846 SMP female right angle to SMP female right angle cable assembly is constructed with PE-P086HF coax.

PE3W20864/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SSMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174NM, RF Cable Type: RG174 Non-Magnetic, RF Cable Impedance: 50 Ohm. SSMB Plug to SSMB Plug Cable Using RG174 Non-Magnetic Coax with HeatShrink. PE3W20864/HS is a SSMB plug to SSMB plug cable using RG174 Non-Magnetic coax. This Pasternack SSMB plug to SSMB plug cable assembly uses a 50 Ohm SSMB for connector 1 and a 50 Ohm SSMB for connector 2. Our plug SSMB to plug SSMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20864/HS SSMB plug to SSMB plug cable assembly is constructed with RG174 Non-Magnetic coax.

PE3W20891

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. TNC Male to N Female Bulkhead Cable Using LMR-400 Coax. PE3W20891 is a TNC male to N female bulkhead cable using LMR-400 coax. This Pasternack TNC male to N female bulkhead cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm N for connector 2. Our male TNC to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20891 TNC male to N female bulkhead cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems.

PE33208

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. BNC Male to N Female Cable Using RG142 Coax., Radio frequency assembly BNC male to N female cable using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to N female cable using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and N type cable connection on the other. Our BNC to type N cable assemblies have a male gender on end 1 and female on end 2. This BNC to type N cable is a male to female coax assembly, PE33208, can also be known as a BNC plug to type N jack cable assembly and will be shipped same-day as it is purchased. BNC plug to N type jack cable assembly PE33208 is built with RG142 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33208 can also be used in the other direction and will be type N female to BNC male cable assembly if the opposite connectivity is required. BNC plug to N type jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to type N cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to N female cable using RG142 coax.

PE3C2082-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMA Male Right Angle Low Loss Cable 36 Inch Length Using LMR-100 Coax., Radio frequency assembly SMA male to SMA male right angle low loss cable 36 inch length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male right angle low loss cable 36 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and right angle a SMA cable connection on the other. Our low loss a SMA to right angle a SMA cable assembly has male gender on end 1 and male on end 2. PE3C2082-36 can also be known as a low loss SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2082-36 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to SMA plug cable assembly PE3C2082-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2082-36 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $77.99
25 : $74.09
50 : $70.19
100 : $67.07

Teledyne HiRel

5962-8855208XA

Teledyne HiRel

STATIC RAM, 32K X 8, LOW-POWER, 55 NS ACCESS TIME
RoHS : Not Compliant

CY37512P208-100UM

Teledyne HiRel

PROGRAMMABLE LOGIC DEVICE, 128 MACROCELL, ELECTRICALLY ALTERABLE, 100 MHZ

5962-8866208MA

Teledyne HiRel

STATIC RAM, 32K X 8, 15 NS ACCESS TIME
RoHS : Not Compliant

5962-8866208UA

Teledyne HiRel

STATIC RAM, 32K X 8, 15 NS ACCESS TIME
RoHS : Not Compliant

5962-8855208MA

Teledyne HiRel

STATIC RAM, 32K X 8, LOW-POWER, 55 NS ACCESS TIME
RoHS : Not Compliant

M38510/20802BJA

Teledyne HiRel

PROM, 512 X 8, WITH 3-STATE OUTPUTS, 90 NS ACCESS TIME
RoHS : Not Compliant

5962-8866208YA

Teledyne HiRel

STATIC RAM, 32K X 8, 15 NS ACCESS TIME
RoHS : Not Compliant

5962-8855208YA

Teledyne HiRel

STATIC RAM, 32K X 8, LOW-POWER, 55 NS ACCESS TIME
RoHS : Not Compliant

5962-8855208NA

Teledyne HiRel

STATIC RAM, 32K X 8, LOW-POWER, 55 NS ACCESS TIME
RoHS : Not Compliant

M38510/20802BKA

Teledyne HiRel

PROM, 512 X 8, WITH 3-STATE OUTPUTS, 90 NS ACCESS TIME
RoHS : Not Compliant

5962-8866208NA

Teledyne HiRel

STATIC RAM, 32K X 8, 15 NS ACCESS TIME
RoHS : Not Compliant

5962-8855208UA

Teledyne HiRel

STATIC RAM, 32K X 8, LOW-POWER, 55 NS ACCESS TIME
RoHS : Not Compliant

CY37512P208-83UMB

Teledyne HiRel

PROGRAMMABLE LOGIC DEVICE, 512 MACROCELL, ELECTRICALLY ALTERABLE, 83 MHZ

5962-8866208TA

Teledyne HiRel

STATIC RAM, 32K X 8, 15 NS ACCESS TIME
RoHS : Not Compliant

5962-8855208TA

Teledyne HiRel

STATIC RAM, 32K X 8, LOW-POWER, 55 NS ACCESS TIME
RoHS : Not Compliant

Win Source Electronics

TPS562208DDCR/TPS562208DDCT

Texas Instruments

6,945 : $0.0432
5,190 : $0.0482
4,020 : $0.0498
2,915 : $0.0515
1,885 : $0.0531
775 : $0.0648

150,000

TLV62085RLTR/TLV62085RLTT

Texas Instruments

815 : $0.37
650 : $0.385
500 : $0.4
350 : $0.4301
225 : $0.4452
110 : $0.4752

104,320

MAX30208CLB+

Maxim Integrated Products

IC TEMP SENSOR
RoHS : Compliant

163 : $1.8497
130 : $1.9249
100 : $2.0
70 : $2.1504
45 : $2.2256
22 : $2.376

22,500

MAX3208EAUB+T

Maxim Integrated Products

ESD Suppressor Diode Diode Array Uni-Dir 5.5V Automotive 10-Pin uMAX T/R / TVS DIODE 10UMAX
RoHS : Compliant

440 : $0.7681
350 : $0.8
270 : $0.832
190 : $0.896
125 : $0.928
60 : $0.992

12,800

ATP208-TL-H

onsemi

MOSFET N-CH 40V 90A ATPAK
RoHS : Compliant

540 : $0.6241
405 : $0.6961
315 : $0.72
230 : $0.744
150 : $0.7681
60 : $0.936

12,000

CDCLVP1208RHDR

Texas Instruments

Clock Multiplexer 8-OUT 2-IN 1:8 28-Pin VQFN EP T/R / IC CLK BUFFER 2:8 2GHZ 28VQFN
RoHS : Compliant

30 : $10.173
24 : $10.5865
19 : $11.0
13 : $11.8271
9 : $12.2407
4 : $13.0677

3,590

BA6208

ROHM Semiconductor

IC BRIDGE DRIVER PAR SIP9
RoHS : Compliant

445 : $0.7607
335 : $0.8484
260 : $0.8776
190 : $0.907
120 : $0.9362
50 : $1.1409

3,000

8P34S1208NBGI

Renesas Electronics Corporation

IC CLK BUFFER 2:8 1.2GHZ 28VQFN / Clock Fanout Buffer (Distribution), Multiplexer IC 2:8 1.2 GHz 28-WFQFN Exposed Pad
RoHS : Compliant

8 : $39.394
6 : $43.9394
5 : $45.4546
4 : $46.9697
3 : $48.4849
1 : $59.091

2,500

LPC2468FBD208

Nexperia

IC MCU 32BIT 512KB FLASH 208LQFP

21 : $16.6401
16 : $18.5601
12 : $19.2
9 : $19.84
6 : $20.4801
3 : $24.9601

2,000

EPF10K20RC208-4

Altera Corporation

IC FPGA 147 I/O 208RQFP
RoHS : Not Compliant

4 : $86.357
3 : $89.8676
2 : $93.378
1 : $100.3988

1,500

LPC54608J512BD208K

Nexperia

MCU 32BIT 512KB FLASH 208LQFP

30 : $10.2394
22 : $11.4208
17 : $11.8147
13 : $12.2085
8 : $12.6023
4 : $15.359

1,200

EPM7512AEQI208-10N

Altera Corporation

IC CPLD 512MC 10NS 208QFP
RoHS : Compliant

1 : $412.8956

810

A54SX72A-PQG208I

Microchip Technology Inc

IC FPGA 171 I/O 208QFP
RoHS : Compliant

1 : $637.397

500

H26M52208FPRQ

SK Hynix Inc

16GB eMMC5.1 EE510A AAT

11 : $32.597
8 : $36.3582
6 : $37.612
5 : $38.8657
3 : $40.1194
2 : $48.8956

300

APA300-PQG208I

Microsemi Corporation (now Microchip)

IC FPGA 158 I/O 208QFP / FPGA ProASICPLUS Family 300K Gates 180MHz 0.22um Technology 2.5V 208-Pin PQFP Tray
RoHS : Compliant

2 : $299.7646
1 : $334.3529

100

Wuhan P&S

MMA02040C2208FB300

Vishay Intertechnologies

Professional Thin Film MELF Resistors
RoHS : Compliant

1 : $0.08
100 : $0.03
500 : $0.03
1,000 : $0.02

54,000

U77A16WH2081

TE Connectivity

1 : $6.11
100 : $5.9
500 : $5.77
1,000 : $5.66

6,000

208-DS02-R Reseller

Enlace URL